DIY FoamCore UV Resin Curing Station: Foam Core 3D print resin curing oven box

Рет қаралды 15,846

2 жыл бұрын

PCBway 3D printing: www.pcbway.com/rapid-prototyp...
This video is about building a UV resin curing station for 3D resin printers. It includes a turn table with a countdown timer. Technically you could cure any UV resin with this unit.
In there video I mention that I use 15meters of led's, that is incorrect. I use 5M length or 15' of Led's. My apologies about that.
Alfred Backpack hangers: botzen.com
Foam Core/Foamboard: amzn.to/2VrhKH0
Elmers 16oz white glue amzn.to/38Gl4TJ
X-ACTO X-LIFE #11 EXTRA SHARP Blades 100 box: amzn.to/37R6vgK
X-Acto #11 extra durable 100 Pack Blades amzn.to/349F2Fu
Xacto Black Gripster: amzn.to/2JuxOCx
SHINWA Machinist square 150mm: amzn.to/39zZ7GQ
Luer lock bottles: www.ebay.com/itm/402687721827
50W laser with light burn: amzn.to/3KtmlQB
LED's with power supply: amzn.to/3N7PuDl
Countdown timer: amzn.to/3m0wg6D
DIY turn table from a microwave: • DIY Motorized Powered ...
Tested Video: • How to Build an SLA 3D...
As an Amazon and Banggood Associate I earn from qualifying purchases.
My Video Gear:
Panasonic GH5 amzn.to/35ZeQgp
Panasonic GH4 with lens amzn.to/2Nb5B7b
Panasonic Lumix 14-140 lens amzn.to/2FOxYmi
Panasonic LUMIX G X Vario Power Zoom Lens, 14-42MM Power O.I.S
amzn.to/2J3KsJH
Manfrotto 244 Variable Friction Magic Arm: amzn.to/2X7YwIT
Manfrotto 035RL Super Clamp: amzn.to/3dbPWyf
Headphones Sony MDR7506: amzn.to/2ycntIV
Samsung 128Gb MicoSD card with adapter
amzn.to/2CcEFzW
Zhiyun Crane V2 3 Axis Brushless Handheld Gimbal Stabilizer
amzn.to/2NKp2kz
Pergear Tripod Tabletop Stand for the Zhiyun Handheld Gimbal Stabilizer
amzn.to/2NaKWjK
My Audio Gear:
MXL 990, XLR Connector Condenser Microphone: amzn.to/3elRw1K
Shure MVi Digital Audio Interface XLR to USB: amzn.to/2VzjgYa
USB-C to Micro usb cable: amzn.to/3cfcrSb
My Hardware:
Apple 16" MacBook Pro: amzn.to/2VrAI0C
Apple Thunderbolt 3 cable: amzn.to/3clTwVV
G-RAID with Thunderbolt 3 amzn.to/2uQppFx
LG 27UK850-W 27" 4K Monitor: amzn.to/3elxpk7
Apple iPad Pro 12.9-inch: amzn.to/2K5qwp7
Apple pencil 2nd gen: amzn.to/3elyisX
Apple iPad Mini 5: amzn.to/2VrJzPP
Slope stand by whip labs: amzn.to/2APaDSt
Extreme pro SD card USB-C reader: amzn.to/3e4bNb1
Apple USB-C to SD Card Reader: amzn.to/3cgGXeo
ThinkTank Shapeshifter 15" Backpack: amzn.to/2Cc6U1F
.
Music: end credits Rurlyok
rurlyok.bandcamp.com
Contact me through www.botzen.com for design work,
you can follow me on:
Twitter: at / botzendesign (@botzendesign)
Facebook: / botzendesign
Instagram: / botzendesign @botzendesign
Botzen Design Inc.
Industrial Design and Product Visualization
www.botzen.com

Пікірлер: 32

@BasicFolders 2 жыл бұрын

If shop class would have been more like this, my entire career would have taken a more interesting path... Glad to have discovered your channel! 👍

@EricStrebel 2 жыл бұрын

Thanks

@CorvusSapien 2 жыл бұрын

Awesome job Eric!

@garagemonkeysan 2 жыл бұрын

Super cool video. Had no idea there was 1/2" foam core. Totally forgot you did a microwave turn table. I just built another one. Mahalo for sharing! 🙂🐒

@ThantiK 2 жыл бұрын

This...is actually one of the more interesting videos you've done.

@EricStrebel 2 жыл бұрын

Cool, thanks

@mjsing Жыл бұрын

Proper usage of the fist pump; nice box too!

@mikeyearwood 2 жыл бұрын

Absolutely brilliant sir!

@MarkMichalowski 2 жыл бұрын

Cool design, Eric! Although the slap on the door to act as a "light seal" is a wee bit superfluous, especially seeing as it wasn't even silvered. And being able to see if the light's on inside from the outside is always useful. And "Whoo!" for the goal!

@andyb7754 2 жыл бұрын

Very interesting video. If I didn't have a UV curing station I'd attempt to make one, like the design.

@wanro027 9 ай бұрын

You’re great, Thnks for this!..I’m gonna trie too

@karbonxiii 2 жыл бұрын

Very cool. I need to play with some foam core.

@EricStrebel 2 жыл бұрын

Good luck have fun

@ge2719 2 жыл бұрын

i keep planning on building one of these, but with how messy the resin printing is i just dont have a space to really use the printer i bought years ago...so i never got around to building one of these. though i'll add apparently the resin doesn't cure well in oxygen, so if you submerge your piece in propylene glycol (vegetable glycerin) in the cure booth it will cure a lot better. I have just a clear tub with the glycol in it, with a little 3d printed sieve thing for pulling the prints back out that then hangs over the container for letting the glycol drip off. Seemed to work well for the few test prints i did manage to do. whereas the first print i did never seemed to full harden.

@jasongooden917 2 жыл бұрын

I made something similar in 2020 but it's not for 3D prints. Mine is thick walled glass and it is used to purify water. I put the UV lights around the outside facing inward and put aluminum foil around it, then a thick rubber mesh exterior.

@bobweiram6321 2 жыл бұрын

ACHTUNG/WARNING: You don't want the UV light strip light hitting your eyes as you're working. It can severely damage your eyes!

@BEdmonson85 2 жыл бұрын

Word of warning about microwave turntable motors. I built myself a turntable basically just like yours and later realized those motors actually can get quite hot. Hot enough to melt the foam? I don't know, but I'd keep an eye on it.

@KevinHillofDOOM 2 жыл бұрын

This is great. You should do a foamcore airbrush booth next. I made one with a bathroom exhaust fan.

@EricStrebel 2 жыл бұрын

Already did that. kzfaq.info/get/bejne/b9uUiLh-3beyd2Q.html

@KevinHillofDOOM 2 жыл бұрын

@@EricStrebel lol, wow. I missed that one. Thanks!

@EricStrebel 2 жыл бұрын

Your welcome

@konstantingrudnev8374 2 жыл бұрын

Foam degrades under UV light, so it's reasonable to cover all the internal sides with aluminum cover. I see you did only for sides, upside, but not for bottom and door

@EricStrebel 2 жыл бұрын

Last shot before the goal shows the door covered. Probably should get the bottom covered as well

@rima1815 2 жыл бұрын

Hi Eric and Thank you very much for your video, it help me a lot ! I have 2 questions : 1) My university professor name was Strebel too, he is Swiss and your logo look similar to Switzerland, are you Swiss too ? 2) I have a piece of wood (made under CNC) from a friend, we try to make a silicone mold of it, but I really don’t know how to make it. We would like to make the mold in one piece, not puttin silicone in second times (to win time on curing...). I don’t know if you can help me about this situation. I already have 3-4 prototypes, but we want the perfect prototype (for mass production in 2-3 years)

@EricStrebel 2 жыл бұрын

Where did you go to school? Totally have no idea what your question is, but wood is probably not the best material to use as a master unless you seal it and finish it with paint or something. I have several videos on painting and finishing. Yes, very Swiss

@rima1815 2 жыл бұрын

@@EricStrebel Neuchatel, to be honest, I have a very very good contact with him. After promotion, we just see that he lived near my village. Of course, if it’s confidential I will delete all my comment., his initial name A.S. For m project, the form is a ice-cream, but the positif is a wooden piece (now I 3D printed the same piece in PETG). But the form is very strange, I can’t find a good solution. Have a nice day, from the Swiss riviera ;). 🇨🇭🇨🇭🇨🇭

@gregoryblajian8951 2 жыл бұрын

Not to poke holes in your presentation, but you said that the aluminum foil would prevent the UV from escaping through the walls but then failed to apply the foil to the interior of the door. Did I miss something?

@EricStrebel 2 жыл бұрын

At the very end of the video just before the hockey goal is a shot with foil on the door 😀

@davidchavez81 Жыл бұрын

I would think white walls would actually reflect better. A diamond pattern mylar would also be good. Otherwise you will get "hot spots" or uneven light distribution.

@mattchumoore4214 Жыл бұрын

I always wonder why no one uses thin mirrors

@EricStrebel Жыл бұрын

You could, it would work well I suppose