What kind of hinges did you use for your stairs? I am looking to build something similar that attaches to a cabinet and then folds out in a similar way that yours did. Great job by the way
@deowrat3 жыл бұрын
Hinges used for doors. But I bolted it to give strength and not screw.
@artwithdad51312 жыл бұрын
You did a great job, I love it. Do you understand the melodious Indian song playing in the background? Being an Indian I love it.
@akashvashishtha88103 жыл бұрын
Wow 👌 u have inspired me to do this on my own
@deowrat3 жыл бұрын
Let me know if you want details. I couldn’t capture everything in video. Because it was not on purpose. But I can guide what I did.
@akashvashishtha88103 жыл бұрын
@@deowrat thanks i'll definitely ask you :)
@wakikuk31333 жыл бұрын
Your coloring is very nice thing. May you make a video for this ...
@deowrat3 жыл бұрын
Thank you for watching and comments. Sure I can make it.
@deowrat3 жыл бұрын
Thank you for watching and comments. I will surely try to make it.
Hi. I have made it by myself. I missed shooting while cutting those.
@HippieDelicia3 жыл бұрын
Where did you purchase the kit?
@deowrat3 жыл бұрын
I have design it to my dimensions and cut it at the home centre, where I bought the material.
@octaviomaciel12543 жыл бұрын
I need the plans for these ladders please
@lucilanieles79433 жыл бұрын
I love it! can you give me all the details please? thank you!
@deowrat3 жыл бұрын
Lucila Nieles sure. Let me know size and angle of what you want to make. I can share my knowledge.
@sherlitermin74293 жыл бұрын
Ё
@mickymirchandani60583 жыл бұрын
How do I calculate the cuts for a 12’ high 3’ wide ladder?
@deowrat3 жыл бұрын
@@mickymirchandani6058 Hi. Thank for watching and comments. I would suggest following: 1) Decide the vertical ‘Y’ axis height of ladder. 2) decide the Horizontal’X’ axis space available for ladder. 3) this will decide angle of ladder. 4) once you get these 3 dimension. 5) decide width of stair step 6) put that width on X axis. It will give you number on steps you can make. If you have no space angle issue. Then start from step 6 and use Y axis for height. This will give you total height and angle for ladder. Not sure this helps. You can stop my video at preparation section. I missed it because I was not decided to make video while start making it. If you don’t understand, I will help you to please write back.
@mickymirchandani60583 жыл бұрын
@@deowrat thanks for explaining the 1st step. I am trying to understand how to make the pattern for cutting of the 2 sides I have a Y axis of 11' and a X axis of 12' so I have 12 steps, each is 1' wide. What is the next step?
@64maxpower2 жыл бұрын
Good job. Where are you ?
@deowrat2 жыл бұрын
Thanks. Hiroshima Japan.
@magicthinker56473 жыл бұрын
If the floor height is 4 m, what is the size of the staircase ? Do you have any idea for folding staicase and can be pull up and lock on upper floor so no one can reach it ?
@magicthinker56473 жыл бұрын
How much weight can be handled ? What tools needed ?
@deowrat3 жыл бұрын
Hi. I have missed the explanation in the video. It was randomly shoot. I will make another video to explain because received many requests. If 4m height, decide size of foot step width. Bigger the width, longer would be ladder. So keep minimum to save space and adjust to proper slope. For me it was 2m and as I put in the closet, I had limited space to kept 10mm of foot step width. And then adjusted how many steps can be fitted. It won’t be folded on upper floor but on the wall and is very convenient. You can put curtain or any innovative idea to hide it.
@magicthinker56473 жыл бұрын
@@deowrat I have the unit that only around 430 cm (if not mistaken. should re-measure). I want to split it into 2 place so the top one (around 30 cm) can be used to save some stuff. The ladder size only for 1 people but need to hold around 200 kgs. Any advice ? Thanks
@deowrat3 жыл бұрын
@@magicthinker5647 To hold 200kg may be good idea to make one out of aluminium or iron.
@magicthinker56473 жыл бұрын
@@deowrat How thick the aluminium or iron to hold 200 kgs ? My plan is to make a ladder that can be lift up and lock at the upper . Any advice or scheme for that ?
@KBBAKTHA3 жыл бұрын
Nice, you could have given dimensions of ladder you made along with height and angle you chose. The loud music background was idiotic and should have been avoided. Your favorite song, need not be favorite for rest of the world. Please avoid loud music.
@deowrat3 жыл бұрын
Thank you for the feedback. I have loaded it without thinking that it would be helpful. I am thinking to create another video explaining properly. I will post my plan. Thank you again.
@KBBAKTHA3 жыл бұрын
@@deowrat Thanks for your positive response. Happy Sankranti greetings to you and your family