DIY homemade tools

Рет қаралды 2,589,526

Ай бұрын

Пікірлер: 819

@robertaylor9218 Ай бұрын

That’s cool, but I’m willing to bet the steel and the gas cost more than a store bought brick tong

@dr.zoidberg8666 Ай бұрын

Also, not to brag, but I'm pretty sure I can carry 4 bricks without a doodad to help me.

@robertaylor9218 Ай бұрын

@@dr.zoidberg8666 sure, but a brick tong is a really handy tool. Like ridiculously handy if you’re laying bricks. You pick up a row of bricks with a handle, and set them down with a handle. You don’t need to do anything other than shift your wrist and the handle is set or free. Such a wonderful tool.

@aaronmyers4054 Ай бұрын

Zactly

@williamgomez5876 Ай бұрын

exactly 💯

@user-ys2zg5ye4i Ай бұрын

The actual brick tongs will carry up to like 11 at once

@gregorymarshall1201 Ай бұрын

Didn't realise I needed a Welder's Goggles to watch this short! 🤦🏾‍♂️

@user-xn9xs4cb2q Ай бұрын

Что бы получить ожог сетчатки от сварки надо смотреть на неë в живую не менее 5 минут при этом не моргая, а шанс получить ожог через экран смартфона не выше чем падение курса доллара к рублю до его же уровня 70 годов прошлого века. Это я вам как сын сварщика говорю.

@user-kr6we6zy9o Ай бұрын

@@user-xn9xs4cb2q у тебя проблемы с чувством юмора.

@user-xn9xs4cb2q Ай бұрын

@@user-kr6we6zy9o , о да точно я ж смайлики забыл понаставить, а без них сейчас ни кто не понимает где шутка есть и где её нет .

@user-kr6we6zy9o Ай бұрын

@@user-xn9xs4cb2q ты объяснял человеку что через экран смартфона невозможно получить ожог сетчатки. Прекрасная шутка. Наверно это у меня с чувством юмора проблемы....

@JB-pb9xv Ай бұрын

@@user-xn9xs4cb2q perhaps for a "bad retinal burn," however I've literally gotten decent retinal burn from it before WITHOUT even looking directly at it AT ALL. While helping or assisting somebody weld for acouple hours, maybe a few hours. Just holding things in place while they were getting it welded, an was looking away. But not entirely, basically I was still seeing the flashing through my peripheral view. An would occasionally glace over very briefly, to see if he was done or still needed me to hold whatever piece in place. Anyways I never for a second thought or felt like any of the flashing caught my eyes directly or long enough to do anything, or cause any damage. Went home after working, did whatever as usual and went to sleep. It wasn't until several several hours later, literally in the middle of the night at around like 3am in the morning. I woke up to my eyes super blood shot red, like purple almost. Just flickering, tearing up and burning. Unable to keep them open, an with my vision all blurred. An they basically stayed blood shot, flickering and burning for the next 2 hours or so while I was constantly splashing my eyes with water. Until it finally chilled out enough to where I was just relieved to finally not be blinded and in pain, and was able to get back to sleep. If you were to stare directly at the flashing weld for even 1 full minute straight, you would definitely feel it at some point. An if you ever stared at it anywhere near 5 minutes, an directly like that. You would honestly do some pretty hard damage, an possibly permanent damage to your eyes and your retinas.

@jfdb59 Ай бұрын

Mason here: so you usually set brick tongs to carry ten bricks, that way three rows of ten side by side form a square and you can rotate the next layer 90 degrees. Alternating like this keeps the stack stable. Tongs that carry four or five are worthless and as was stated by someone else, you probably spent more to make these than you could buy a cheap pair for. These diy ones could never be built to handle a full tong of bricks as the flat stock end would just bend from the pressure.

@MybeautifulandamazingPrincess 29 күн бұрын

Arrogant.

@user-vm7wn4hk8m 28 күн бұрын

まじで目が悪くなりそう

@goshohgosh4568 27 күн бұрын

You should post more videos about your pets @@MybeautifulandamazingPrincess

@zachelope2514 26 күн бұрын

@@MybeautifulandamazingPrincess anything is arrogance these days lmao

@jomamma1750 25 күн бұрын

@@MybeautifulandamazingPrincessYou might have misspelled accurate.

@Tapper2004 Ай бұрын

Умеют же люди удивлять. Вот смотришь на это и думаешь: "Что за ерунда?!" А потом, когда всё собрано, сварено, выкрашено, ты с удивлением смотришь на то, что получилось, и думаешь: "Ну и ерунда!"

@asiawelder Ай бұрын

🙏

@OffGridInvestor Ай бұрын

Except these are average brick layers tools at every hardware store.

@MehanicCustom Ай бұрын

😂😂😂

@arthurclark7353 Ай бұрын

Ты не понял его сарказм.@@OffGridInvestor

@DaWanderer Ай бұрын

Hilarious and true.

@user-kp8ic2ju5e Ай бұрын

ГЛАЗА!!! Хорошая штука... До первого вывалившегося на ногу кирпича))

@profialex1 Ай бұрын

Я тока хотел написать 😂

@user-cq8ey8wq2f Ай бұрын

А за ним и остальные трое подтянутся😂

@user-my8yf8hr8i Ай бұрын

😂😂😂

@lucusfindley5534 Ай бұрын

So it took you three hours to move 20 bricks?

@user-rk5nc8ym2g Ай бұрын

Да Вы правы на 20 кирпичей хватит и рук но когда их 3 4 или 5 сотен в день да ещё их и положить на раствор то вечером шкура на указательном и большом пальце сотрется до живого мяса. Так что зацепы такие просто необходимы и желательно 2 штуки в левую и правую руки (на позвонок нагрузка меньше)

@1nvisible1 Ай бұрын

*We made one of these in an hour and 15 in the 2nd hour. Great tool thanks*

@bodaducheebodaduchee6473 Ай бұрын

You need a tool to carry 4 bricks?

@KneelB4NoMan Ай бұрын

@@bodaducheebodaduchee6473No Shit! I’m with you. Lame…

@AlbuquerqueBandit Ай бұрын

@@bodaducheebodaduchee6473 y'all have apparently never done manual labor jobs like bricklaying. While I can carry various sizes of spools of wire in my trade, it'd be nice to have a tool similar to this for doing it if I gotta move a bunch. And trust me, brick layers move a LOT of bricks. It's a game changer, being able to instantly grab and move 4 bricks, rather than having to do it 1 by 1. Major difference in efficiency right there.

@user-bc9pp1gv2h Ай бұрын

Я делал такие, только простые, без наворотов, для переноски керамзитобетонных (шлакоблоков). Блоки страшно неудобные в плане переноски. Эти прихватки сильно помогли при постройке гаража. Отработали на ура.

@pozerovnet Ай бұрын

что я только что прочёл :))))) Керамзитобетон это не шлакоблок во-первых, а во-вторых керамзитобетонные блоки носятся ещё лучше, чем газик, например

@user-bc9pp1gv2h Ай бұрын

@@pozerovnet Я в курсе, что это не одно и тоже, но форма и габариты одинаковые, а название зависит от наполнителя (хоть ОПГС, щебень и пр.). А удобство переноски зависит от формы и количества пустот. У меня были четырёх пустотные, а встречаются ещё и с пяти.. - эти вообще одной рукой не прихватишь.

@pozerovnet Ай бұрын

@@user-bc9pp1gv2h бред, зависит от производителя

@user-bc9pp1gv2h Ай бұрын

@@pozerovnet А производитель-то здесь причём? Есть определëнные стандарты по размеру и прочности. Я, например, блоки для себя делал сам, с разной пустотностью и разным наполнителем - от тяжëлых до относительно лëгких.

@pozerovnet Ай бұрын

@@user-bc9pp1gv2h по размерам нет стандартов, индивидуально

@LeoN-tq6fm Ай бұрын

Единственное,пока ты будешь раскладывать кирпичи в ряд для хвата,можно уже их на руках унести))

@asiawelder Ай бұрын

🙏

@IGNOBLE-7 Ай бұрын

Cool build. I worked construction in NYC. I used a tool like that. Before a started picking up rows with my hands and stacking them Cool to see you create one. Good job bro.

@asiawelder Ай бұрын

🙏

@Leshiy_Dnepr Ай бұрын

навіщо ручка, вона зайва

@savsav2627 Ай бұрын

Я один зайчиков нахватался пока смотрел на сварку?

@user-yu8ep7mk7b Ай бұрын

Нам забыли сказать ГЛАЗААА

@user-sh8eh6rd6e Ай бұрын

@@user-yu8ep7mk7b не сварщики бы и так не поняли)

@user-yu8ep7mk7b Ай бұрын

@@user-sh8eh6rd6e вот это и обидно, хотя я и не сварщик.

@user-cy4tv1io7p Ай бұрын

Я закрывал глаза прикинь😅😂 привычка😊

@user-cy4tv1io7p Ай бұрын

@@user-yu8ep7mk7b в училище с юмором был препод говорил смотри когда показывал

@neioo231 Ай бұрын

Эксперты - сколько тут полуляхов?)))

@Zaza769 24 күн бұрын

😂

@Scooby-NSK 20 күн бұрын

сотня точно... при изготовлении приспособления ни один подшипник не пострадал😂

@pelon542 Ай бұрын

DYI that needs a welding shop to make a homemade tool

@jeepwk6.5L Ай бұрын

Almost every man has a grinder, drill, and a weld machine, lol.

@dancearoundtheworld5360 Ай бұрын

$60 welder and barrow a drill/ grinder

@01keyboard Ай бұрын

@dancearoundtheworld5360 yo where you finding 60$ welders? Lol I have 4 and my cheapest one was probably still $150 3/8 110v.

@dancearoundtheworld5360 Ай бұрын

@@01keyboard amazon but i own a $97 stick which is dope

@01keyboard Ай бұрын

@@dancearoundtheworld5360 really...that's insane. How do you like it? What voltage?

@boogboog8097 Ай бұрын

1000k in equipment and hours of work to make a crappy version of a 20 dollar tool 😂

@--_DJ_-- Ай бұрын

I see about 200 bucks worth of tools used here. Still not worth the effort.

@Pure_KodiakWILD_Power Ай бұрын

Yeah, why take any initiative or learn skills at all, when we can just buy it online, or someone else can do it for us 🙄 pfffft.

@--_DJ_-- Ай бұрын

@@Pure_KodiakWILD_Power well you can get a better tool for next to nothing compared to making this thing.

@KomeFits Ай бұрын

That you watched him make so he made his money back

@--_DJ_-- Ай бұрын

@@KomeFits I doubt this paid for the welding rods used.

@danielkelley1952 Ай бұрын

You call those welds maybe by a technicality...

@non-yesman7995 27 күн бұрын

There it is!!! Lol I was looking for a welder complaining about another welder's work! You guys can't help but complain about each other's work! 😂😂😂

@johnbeargrease6784 26 күн бұрын

Welders are super dramatic. They basically sew with metal. It’s not hard to do or learn.

@aleksandrsechenov412 Ай бұрын

Ну вот, из за тебя зайцев нахватался, теперь ничего не вижу. 😂

@tonigekko Ай бұрын

Пока делал эту приблуду я два поддона перетаскал😂

@peterstone9316 Ай бұрын

It looks like that handle is pointless, a little less weight as well!

@LaGuerre19 Ай бұрын

Why is everybody piling on this guy? It's creative and well done. Thanks for sharing.

@asiawelder Ай бұрын

👍🙏🙏

@XM8A1 28 күн бұрын

Cuz u can buy one that picks up more for cheaper.

@sagacomonmagpie Ай бұрын

こういう治具を考え付く人は、本当に真面目で賢い。みんなの為になる。

@OffGridInvestor Ай бұрын

This is a copy of a brick layers tool that EVERY hardware store sells. No genius in this.

@00jamiejohnson00 Ай бұрын

@@OffGridInvestor did he nt say the person that came up with this?? and where is your contribution to anything?

@JosephGarlick Ай бұрын

Cool you made brick tongs. Mine carry 8 to 10 bricks at one time.

@robertclark972 20 күн бұрын

You didn't notice that it's length is adjustable ?

@thereindeertherabbitthebat592 28 күн бұрын

By the time you finish making the tool, you could've moved all the bricks.

@Lync512 Ай бұрын

Awesome video! Just ordered one, excited to get to use it

@stanf9070 26 күн бұрын

Wow, just what I needed a solution to a problem that doesn’t exist

@user-oy7qq6ud9p Ай бұрын

Нужна доработка зубчатые концы захватов !

@Dr._Orgazm 25 күн бұрын

И кирпичи с пазами чтоб с середины не вываливалось.

@gogogogo8169 Ай бұрын

انه مفيد جدا للعاملون في هذا المجال.. فكرة جيدة

@asiawelder Ай бұрын

🙏🙏

@redwar7253 Ай бұрын

للعاملين

@user-lt7kx8on3f 24 күн бұрын

You are a genius. Make life working a lot easi.Wish everybody thinks like you

@jamesMwebber Ай бұрын

Please try not to film so much welding or at the very least put some kinda effect so that it makes that part of the video more dim. The brightness may not be like looking into a real welder arc flash, but the brightness on the screen is intense to the viewers. Keep the good ideas coming

@asiawelder Ай бұрын

🙏

@Lizzzz90 Ай бұрын

He's totally going to keep blinding everyone. Lol

@adamsifford6228 Ай бұрын

Wow welding your own brick tongs 🧱

@user-vr3mc1tr9r Ай бұрын

Хороший сварщик! Сварочный шов хороший. Вероятно сварщику делать не чего. Но, этот хоть не сваривает лопнувшие пополам кольчатые валы грузовиков.

@paulosilva6598 Ай бұрын

Enquanto o cara perdeu tempo pra fazer essa bosta, gastando eletrodo, eu descarreguei o caminhão sozinho de tijolos 🧱

@johnpaton4246 Ай бұрын

Great tool for someone with only one arm

@asiawelder Ай бұрын

🙏

@AlfredoZavala-cu3xx Ай бұрын

Pasa por alto la parte donde soldas.solo apunta y continúa.es molesto la luz de la soldadura

@asiawelder Ай бұрын

🙏🙏

@20truck 24 күн бұрын

And no one ever thought of this before, I believe back in the '60s there's a little tool that carries brick exactly the way yours does You can buy them in any masonry supply store. But I do like your customization features

@swifty2844 28 күн бұрын

Just a quick one, if you're gonna spot weld using stick, you need to clean the slag off after every spot or you will get inclusions.

@asiawelder 28 күн бұрын

🙏

@marufmunna1 Ай бұрын

After using all those workshop tools, bro named it "Homemade" 😂

@spercwolf2985 28 күн бұрын

Where is my welding mask to protect my eyes from the bright flashes in this video?

@CaShDaColdRappa 28 күн бұрын

Yoo, this is neat. Original, practical, useable. Definitely unexpected, i dig it!

@RandomCitizen-vl1wi 2 сағат бұрын

$230 in metal, $400 for the 2 hours of work welding and you just made yourself a $60 brick tong.

@pinocolada4254 29 күн бұрын

This used to be a school project in shop class in the Netherlands. For the welding shop boys to give to their bricklaying or paving student friends. When boys were taugth to work with their hands, make stuff themselves and share with others.

@saiiiiiii1 Ай бұрын

Never has a channel name been so fitting

@asiawelder Ай бұрын

🙏

@weezyyeswes Ай бұрын

Very impressive!. I need to start jotting these DYI tools that will help me out in the field.

@asiawelder Ай бұрын

🙏

@robertoalsina3949 Ай бұрын

Un invento que desconocía, de hecho no sabía que existía algo asi para llevar ladrillos. Muy ingenioso, te felicito!!!👍💪🙋🏾‍♂️🇦🇷

@rsh3852 Ай бұрын

Бля я зайцев нахватался, пока смотрел. Ночью будет полный пизнес😢

@asiawelder Ай бұрын

🙏

@Makridi Ай бұрын

присбособа чтобы таскать 4 кирпича?! КРУТО!! с тем же успехом можно в каждую руку зарядить по два кирпича ну если у вас одна рука то зайдет на ура

@asiawelder Ай бұрын

🙏

@peterpumkineater6872 Ай бұрын

Had one of those, could lift 10 bricks ( double row )🎉

@Guestimaker Ай бұрын

Very good! Nice! Good idea! 😊😊😊 👏👏👏

@asiawelder Ай бұрын

🙏🙏

@Guestimaker Ай бұрын

@@asiawelder Thanks for your replay! Good luck!

@vitinhogodoy3771 Ай бұрын

aprendi aquí que el tiempo es oro.

@asiawelder Ай бұрын

🙏

@user-xk3to8bw5c Ай бұрын

Время которое у нас есть,это деньги которых у нас нет 😊

@samuelnedelec3955 Ай бұрын

Bonjour 👋 le temps ⌛️ c'est de l'argent comme les gobelins du jeux vidéo world of warcraft ++

@sidehop Ай бұрын

Oh, that's ingenious; I have a similar tool (from a store) for carrying plywood (up to 1"), and it helps so much.

@terravarious 29 күн бұрын

Imagine how much better it would be if a welder made it.

@saphar5958 Ай бұрын

People should understand that being cool in Internet doesn't makes them actually cool Should appreciate everyone's work

@leroyfalconer Ай бұрын

Unless you're blinded by it 😅

@Germz4U 28 күн бұрын

Now THIS is the type of goofy light welding project I like to see.. I feel like 99% of all of this type of content is just making clamps in various form..

@mastermir8347 28 күн бұрын

все инструмент сделали теперь нужно найти грузчиков которые сложат по 4 кирпича в ряд. и можно высокотехнологичным инструментом нагружать свой позвоночник и суставы. а когда кирпичи будут сложены грузчиком неожиданно выяснится что они толще и придется убрать по одному кирпичу из каждого ряда. вот что предлагаю я. нужно нанять полтора алкоголика и они поштучно за бутылку перенесут кирпичи куда будет указано только бутылку отдавать после окончания работы. для тех кто постоянно занимается переноской кирпичей могу предложить более простой способ....

@ARNYKATZ 18 күн бұрын

Well that was a long walk for a short drink of water.

@asiawelder 18 күн бұрын

🙏

@brada1997 Ай бұрын

Cool tool. But I think i could weld that bad when i was 8.

@asiawelder Ай бұрын

🙏

@rsz90182 Ай бұрын

Wow nice ides

@asiawelder Ай бұрын

🙏

@OffGridInvestor Ай бұрын

Every hardware store sells these. This is nothing new

@belliermichel8883 Ай бұрын

Super idée ! ET, je pense que ce serait intéressant de proposer un même principe d'outil avec du bois principalement comme matériaux. Qu'en pensez-vous ?

@asiawelder Ай бұрын

🙏

@missjddrage1111 Ай бұрын

I bet that tool by itself is heavy as it is, let alone lifting multiple bricks at a time.. but he made this look so easy. Great job. 💯🏆🔥

@jonathanlynch9587 28 күн бұрын

Are you kidding me…. This is AMAZING 😎. Man you are one of a kind

@user-zk9cq5vh9e Ай бұрын

Ish video ko dekh kar meri ankh he kharab hoga 🤣😂🤣😂🤣😂

@asiawelder Ай бұрын

🙏

@antonvenrud4814 Ай бұрын

Предупреждать надо, из за вас зайчиков нахватался глядя на сварку.

@asiawelder Ай бұрын

🙏

@StanOwden Ай бұрын

I wonder how many people with epilepsy had a seizure while watching this short film?

@abdelghanibenhmama4943 Ай бұрын

ياخويا تجربة شابة الله يبارك بصح قولنا نديرو كاسك راه ضربني لارك ني نعاني من عينيا هههه

@asiawelder Ай бұрын

🙏

@rikshaw2233 Ай бұрын

Cool build but, the Camera is Much too close to that Ark Welder. Bad for viewers eyes. 😑

@asiawelder Ай бұрын

🙏

@bkvenupriyan725 Ай бұрын

@@asiawelderShow tool clearly.

@TechMasterRus Ай бұрын

Just wear a welding mask while watching this video like I do😂

@zombiepirateninja1438 Ай бұрын

Lmfao, it's cute that y'all think you can get flashburn from a video. 🤣🤣🤣🤣

@mikeartzner7842 22 күн бұрын

The gloves and chipping hammer are hilarious!!!

@ImKennyOp Ай бұрын

When the addy starts working

@asiawelder Ай бұрын

🙏

@zombiepirateninja1438 Ай бұрын

Proper title: "tool demonstration that is rarely known" A discovery is something that is completely unknown up to that point.

@asiawelder Ай бұрын

🙏

@user-es4st7zz8o 28 күн бұрын

В юношестве такого не хватало, когда был на подработках

@hellephant4268 Ай бұрын

Not even worth it, Amazon will drop a painted one with holes and a through pin for a more secure adjustment over a washer topped compression bolt for under $30. This guy is an inventor.

@dadegixxer Ай бұрын

Why would the mason have a welder, and why would a welder need a mason’s tool?

@Peace-for-Love Ай бұрын

Ну да. Кирпичи именно так и лежат в основном.

@asiawelder Ай бұрын

🙏

@Thejbelow Ай бұрын

Foreman : Cool! Now youre fired.

@aleksandrmet4546 Ай бұрын

Перед просмотром данного ролика ,оденте защитные очки😅

@MrRomynacido Ай бұрын

Who else wants to watch a short vid with the eye-burning welding process?

@user-ie2lw6ev4k 28 күн бұрын

Wow! That is a really cool rarely known tool discovery that can be bought at Home Depot for $30.

@billyhighfill Ай бұрын

Some of those welds ARE HIGHLY SUCPECT😂😂😂😂.

@user-ec9fb8fw3g Ай бұрын

Сначала по 4 шт кирпича выкладываешь отдельно потом с этим чудо инструментов перетаскиваешь

@reinaldogarcia70 Ай бұрын

Awesome

@coreyyoung3759 Ай бұрын

Buddy... ? wth are ya' doing? You spent half the day preparing for a 10 minute task. 🤦‍♂️ But an A+ for creativity tho:)

@asiawelder Ай бұрын

🙏🙏

@eduardoreyes8780 22 күн бұрын

Only makes sense if you make two, one for each hand…OR you’re making it for a one handed person.

@RustedPlastic11111 Ай бұрын

To short, that brick clip carry 6 bricks One clip in each hand total 12 bricks Less walking back and forwards carrying bricks.

@asiawelder Ай бұрын

🙏

@__barmaley__ 25 күн бұрын

Без маски смотреть невозможно)) я зайчиков наловился)

@jodynunley6447 Ай бұрын

Dang! I think I'm going to have flashburns.

@reallue Ай бұрын

I thought this one would finally turn out to be making a robot. It never turns out to be a robot 🤖

@friendlyoldbum9182 Ай бұрын

You want a clip to lift 6 bricks. An adjustable clip like this wouldnt last long at all.

@nik13104 Ай бұрын

За то время пока он сварил эту приблуду Я уже весь кирпич перетоскал в ручную 😂😂😂

@robinchakma8525 Ай бұрын

Very nice video 👍♥️♥️♥️

@UnknownDarkness82714 29 күн бұрын

That's all fine & Dandy until you get 2nd degree burns during the blaze of the summer still, great invention

@buddymartin7923 Ай бұрын

Hey it works!!!! Kudos

@justingrundy6571 28 күн бұрын

Only difference bigger scale a ex carried mine the done a drop while buck was full too 💪

@asiawelder 28 күн бұрын

🙏🙏

@Leadvest 28 күн бұрын

Get some thinner diameter rods. Then you can turn down the amps, and get some continuous beads.

@user-em7vj5tl4p Ай бұрын

Ця хреновина весит как полноценньій кирпич. То есть по факту вьі вместо 4х кирпичей, тянете 5ть.

@TechMasterRus Ай бұрын

Но это в итоге проще

@user-ge6em1qz5f Ай бұрын

Pierdo más tiempo asiendo esa pendejadas para eso tengo las pinches manos

@asiawelder Ай бұрын

🙏

@bigal4174 Ай бұрын

When you can't weld but you can tac. 😂

@humongousfungusamongus3871 Ай бұрын

You created a brick carrier that may carry 5 bricks @ a time? You already had a biological brick carrier... they are called your arms!

@mikemiketrill Ай бұрын

😂😂😂😂😂😂, bruh you did good but that’s just a “battery” carrier in the car business. Sell for like $15. Nice welding tho.

@asiawelder Ай бұрын

🙏🙏

@barracudaboi790 29 күн бұрын

Man, I love your welding skills

@mulebutter433 27 күн бұрын

Why do all KZfaq welding videos involve just a series of tack welds that are done on top of the previous one’s slag instead of an actual weld done with the right equipment?