Excellent instructional type of build video. I rarely find this kind of crisp and educational build tutorials. Thanks

Wow that looks very impressive. A flawless build. I hope this gentleman enjoys how great his work is. Very good style.

Just built one for my garage loft, super easy to build and is so stable and strong. I finished it in linseed oil with a darker stain on the treads to hide dirt. Thanks Charlie.

I did a modified version for my shed loft. Took me an afternoon....very happy with the result. Thanks for the video. Very helpful....particularly the step template and the router bit with the bearings up top.

I too wish I could upload a picture. Mine's just getting assembled, staining and verathane to follow. I used the fancy router bit to cut out the handles because I was simply not brave enough to use a Skil saw, but I did trim the ends with a skill saw and then finished them off with a jig saw versus a Japanese pull saw. Took me a really long time to build it though, a month of weekends and a few mistakes along the way, but I am finally there. Thank you Charlie Spitzack!

Thanks for teaching us to build that super cool ship ladder. Followed your instructions all the way and it turned out great!

Great video

Well done!! Thank you. I built a cabin with 2 lofts- one in each end. This ships ladder is perfect- either a moveable version or one in either loft. Here in Canada, we can use Robertson screws instead of Torx...

Awesome project. Great explanation throughout

Thanks, the best angles are what I needed.

Thanks for posting. Took some ideas and transferred to my kids "ship ladder"(60 degrees) for their clubhouse

I just built one to get easy access to my loft storage space over my work area in the shop. Had to special order the pattern router bit (Whiteside brand are really nice ones) but found everything else locally. Turned out super nice and I’ll be attaching it to at loft with hinges and will raise/lower the bottom out of the way with an electric winch. Thank you for the inspiration.

Thank you for this great video. I was able to build the entire ladder utilizing your KZfaq video. I would upload a picture if I could. Thanks again Spitz!!

That is so cool and production quality makes it very easy to watch . Thank you

Love the show! Will be building for my tiny house in Eastern Washington

Awesome video!!! Exactly what I was looking for

Spitz, This ships ladder video was so helpful! I can't wait for Dustin to see it! We are building a home in Utopia that we will use this ladder in. Be Blessed! Art

Best how to video i have seen so far. Good job young man !!

Thank you for sharing the video.Very cool.

love the video. great job. cant get over that harry potter look

Beautiful!

Really well done build and video. Kudos dude

Brilliant tip on laying the stringers together to keep your wits about the mirror image of the cuts. Great stuff.

I like the integrated hand rails. Wonderfull seeing a longer in detail video from NTS feat. Charlie. ( Hi Spitz :-) Looking forward the next. Kind regards MB

Very nice!

Good job... Mr. Potter

Nice work.......

I gotta get my hands on those screw products screws. Someday.

Just loaded it right up and bring it over here boys, I been waiting on ya

Thanks!

Awesome instructions. I really found this helpful so far. I'm not sure if I must use a plunge router. I might need to buy one :-) which is awesome. I'm still feeling shy about the plunge cuts with the circular saw. I have a couple side winder circular saws. But, I see the man using a worm-drive circular saw. In my mind, this seems like a more stable power tool for these internal cuts. I might need to buy one of those too. Thanks. I'm having a blast!

My works too. Used wood prix handbooks and build it with no problems.

Great video, using your design to get up to my roof. I know you probably use a mask when not videoing....but a word of advice from a 64 yr old with COPD due to sawdust.....wear one. 😉

Mais um Inscrito!!! Brasil

Lol, nom nom nom router dust in the lungs.

Great video! I'm building one and was wondering what kind of finish do you guys put on for the Northwest weather ? thanks Craig Breitbach

Really inspiring. Not sure if you answer questions? Does a track saw work instead of a worm saw? Many Thanks, Phil

What a great vid. Exactly what I needed to see! I'm contemplating building a ships ladder very similar to this, but it doesn't need to be anywhere near as wide. Also, weight is an issue. Would 1" x 12" x 12' stringers (and matching 1" x 6" pads) out of poplar be strong enough if the width is about 18" from outer edge of the stringers? Wife is small and needs to be able to move it a bit. All help appreciated!

Hey Sptiz, where's all the mud? (: Big Island style, baby!

What brand of power and hand tools do y'all use and why?

Dumbledore would be proud son.

So thats what Harry Potter does since leaving Hogwarts.

Why do you need a 16 foot length of 2x12 when the longest dimension is 12 foot, 4 and 1/8 inches. Could I not use a 14 foot piece instead? Or a 12 foot piece with 5 inches glued onto it's end? I like your work though.

I need help getting access to the river, can you come over? (After quarantine)

Great video guys. Interested in the comment about not driving the screws in too far...how does that change it's holding power?

You used fur? I always have grain raise issues with fur

Is it possible to make alternating steps with this design? If so could you give some details on how to go about the process if trying to use your original video as a guide?

12:01 Those 4" screws are quite long. Is there any way to make sure you screw it in parallel to the steps? I kinda think i'll screw it tilted and it ends up popping out.

Make some more DIY videos !

Now that I've watched the entire video, and backed up on a few sections, I have a few recommendations. You're calling this an intermediate project, but then adding in things that an intermediate level woodworker may not have, or doesn't have the experience in using. Specifically, plunge saws aren't really an intermediate tool - especially at that size. Mine, for example, won't cut through 2" thickness, if I recall correctly. (That tells you how much I use it). Instead, use the router with a large bit. That'll make a clean hole (even if you have to use it twice per stringer, flipping it once to cut from both sides). You then used a rather expensive flat saw, which most woodworkers won't have bothered with buying. If you need to clean up a round cut, rather than using a hand chisel (which is a basic tool), I would be using a rasp. (Using the router would obviate (remove), the need for cleaning up that connection anyway, plus no longer needing the flat saw). At the end, you show cleaning up the wood glue, but don't mention that if you plan to stain or lacquer the ladder, you'll need to sand the areas where the glue has been smeared so that the stain/lacquer will soak in. That should be obvious to even a basic builder, but this is a rough instruction video. For the fasteners? Rather than pushing a specific brand (which I realize you're probably paid to show), suggest the head type and length. As was stated in another post, in Canada, Robertson (square drive) head is as common, or more common, than Torx/star. I can even buy bugle head or round head pocket screws (Deckmate and Kreg Brand) through Home Depot, even in Houston. I personally prefer Robertson to Torx. In a few places, the user may only be able to get Phillips. Edit - the outro volume is much lower than the main video. It was very hard to hear.

I am confused about the plunge router bit. I am using 1 1/4" oak for the sides of my ladder and 1" thick wood for the steps. I got a 3/4" plunge router bit with a top bearing and did a test run on a scrap and I used a 3/8" edge bit and rounded over the edges of my first step. They do not fit together. Didn't you mean that I should use a 3/8" plunge router bit? Then I started looking for a 3/8" plunge router bit and I simply can't find one that is 5/8" deep. The one that I found is only 1/2" which means I will have to do every single plunge twice to achieve the 5/8" depth. Also, I read that it is going to be hard on my 3/8" bit to do all that plunge work (esp. with oak) so I am going to do it with the 3/4" bit and just cleanup the corners with the 3/8" bit - which means I have to do every one three times. Once with the 3/4" bit and then twice with the 3/8" bit. I am using a router with a 1/4" shank. Should I be doing all of this with a 1/2" shank given that I am using oak?

I wish I could cut straight like that...

Is that a plastic quick square? holy cow! have Pete spring a coupla bucks for a real one. tell him Q said so.

I have a 16 x24 x17’3 steel building,therefore no rafters, beams, etc. I have a 10ft high loft that is 16x12 and another section connected at a “L” shape that is 6x12. The only area that does not have the loft is where my garage door is. I am wanting to add in a staircase for access, but am needing it to fold up. I am looking at using rails that are 6ft for top section and 8 ft for bottom section, therefore stair length measure of 14ft. So 10ft rise and approx. 9.8ft run. Does this sound acceptable as I don’t want too steep as I want to carry stuff up the stairs without needing a handrail, or would a shorter staircase work better. I do not have a railing on the loft as this is in garage and will only be used for storage. Would you be able to assist me with some plans and measurements. Any assistance would be greatly appreciated.

Maybe in my next lifetime I would like to be a carpenter...

He's the muggle version of Harry Potter.

Nice hair

Thanks very much for this video! It inspired me to add two of these ladders to my kids' treehouse. They really like the ladders, and I really like the fact that there is always a handle for them to grab onto. Here's the treehouse I built - how did I do? kzfaq.info/get/bejne/ibyodsiE1svUnnk.html

Stodoys plans is a solid company with solid woodworking plans.

harry potter!!!!

I found this immensely helpful, thank you. But I have to ask... a Prisoner tattoo? Aren't you rather young to be a fan of The Prisoner?

This guy looks like he likes hot dogs

I've heard good feedback about the Woodglut plans.

i assume you squared it ;p

*Spitzack not Spitzach*

Thanks Harry Potter!

This time I will use woodglut plans for this.

Ladder Made in Hogwarts

I really like the Stodoys plans.

Harry Potter

While I appreciate the attention to detail, especially when describing the mirror aspect of the stringers, I would suggest that you don't use abbreviations and short forms of description of what you're working with. Since this is instructions, you shouldn't assume that someone actually knows that 'doug fir' is 'Douglas fir'. (it doesn't even save you time to shorten it!)

The video does not address the ravages that Mother Nature will have on the beautifully sanded wood stair. The lumber used are very expensive since they are very wide and relatively long. Tools used are in the advanced craftsman range, so not in the shop of even most experienced craftsmen. The width of the stair is okay for adults BUT not suitable for kids, AND the riser height probably also too high for kids. Other than these obvious things, fairly good video.