DIY HP/Agilent 53131A 53132A Ultra High Stability Oven Option 012 and 010 Time base Upgrade
Рет қаралды 2,687
6 жыл бұрынDescription of my HP/Agilent/keysight 53132A 53131A Ultra high stability oven upgrade DIY Open Source project.
53132A-012
53131A-010
Here the project, Gerber, schematic and source available at project page.
www.circuitvalley.com/2018/07/...
GPSDO Project
www.circuitvalley.com/2018/07...
Video description of GPSDO
• 10Mhz GPSDO Standard R...
my github.
github.com/circuitvalley
/ circuitvalley
@krzysztofbednarek9485 5 жыл бұрын
Super , Thank You ;-)
@electroaid Жыл бұрын
The one you sent me was with a very used Trimble OCXO (not a XO00281M-CT-MV89). Can't find any information on 34310-t OCXO. It drifts right after Cal, no matter how many cals or warm up time passed. Any ideas?
@circuitvalley Жыл бұрын
All Oscillators drift, If you look at Daily Spec of MV89A it drifts as well. . I have both new and used MV89A They almost match in specification to 34310. As 34310 is part for OEM you will not be able to find any direct data on it. But it has similar specs to MV89A. Both of them are double oven oscillator. MV89A are hard to find these days, Even if you find oscillator itself cost around 90 EUR, You can source MV89A your self can do a swap.
@chickennugget3362 3 жыл бұрын
Where can I buy one please?
@circuitvalley 3 жыл бұрын
You can buy on ebay or on blog post over paypal. You can also drop me a message over email.
SmarterEveryDay
Рет қаралды 371 М.
Fabiosa Animated
Рет қаралды 8 МЛН
The Signal Path
Рет қаралды 26 М.
Fabiosa Animated
Рет қаралды 8 МЛН