DIY Hydraulic Press Brake PART 2- Backstop Using a Linear Actuator

Рет қаралды 10,078

Күн бұрын

DIY Hydraulic Press Brake PART 2- Backstop Using a Linear Actuator
Want to build your own Hydraulic Press Brake? Links to the DIY Build Plans:
My Website Shop: rathasochenda.com/product/diy...
Etsy Shop: rathasochenda.etsy.com/listin...
DIY Shop Hydraulic Press Brake Weld-It-Yourself Kit: rathasochenda.com/product/com...
Video Description:
How to build a homemade pressbrake. In this video series, I’ll share the process of building out my homemade brake press, which will include a NC control back gauge and limit switches to tell how far the punch die needs to travel down to achieve a desired and repeatable bend angle.
Items used in this video:
Cyclops Press Brake Tool: / cyclopsdesigns or www.ebay.com/itm/115064499037...
Electric Hydraulic Pump/s: s.vevor.com/bfQHVv
Vevor 30 Ton Cylinder: s.vevor.com/bfQh9M
Anti-Wear Hydraulic Fluid: amzn.to/3Lt3YP9
Limit Switch: amzn.to/3qZNw1Z
Return Springs: amzn.to/47X0YnM
Linear Rail: amzn.to/3L2KLnp
Digital Angle Gage: amzn.to/3QZTESt
Leveling Caster 2200lb Capacity Set of 4: amzn.to/486WB9U
Video Chapters
0:00 - Introduction
0:27 - Why you need a backstop
0:56 - Solidworks details of the backstop
1:57 - Making the backstop and building it
3:50 - Installation
8:02 - Backstop Demonstration
13:56 - The Results
14:41 - Preview of part 3
15:29 - Diy Weldpak Kit
15:50 - Conclusions
Read more about my PC Setup that I use for SolidWorks and video editing: rathasochenda.com/pc-build-2019/
Do you like the music in this video? It's all from the Epidemic Sound library. Use my link to get your first 30 days for free: www.epidemicsound.com/referra...
Follow my projects on Instagram: / ratha.soche. .
Instagram: / ratha.sochenda
Kit: kit.co/ratha.sochenda
LinkedIn: / rathasoch. .
Behance: www.behance.net/rathasochenda
DISCLAIMER:
We are a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for us to earn fees by linking to Amazon.com and affiliated sites.
By using some of the affiliate links above, I may receive a small commission, at no extra cost to you. This is the easiest way to support me and helps me continue making content like this for you. Thank you 🙏
Due to factors out of my control, I cannot guarantee against improper use or unauthorized modifications of this information. I assume no liability or responsibility for property damages or injury incurred as a result of any information contained in this video. Use this information at your own risk. I recommend safe practices when working on vehicles and/or with tools seen in this video. Any injury, damage, or loss that may result from improper use of these tools, equipment, or from the information contained in this video is the sole responsibility of the user and not me. Be safe!
#customfabrication #cncplasma #metalfab

Пікірлер: 46

@RathaSochenda 6 ай бұрын

Want to build your own Hydraulic Press Brake? Links to the DIY Build Plans: My Website Shop: rathasochenda.com/product/diy... Etsy Shop: rathasochenda.etsy.com/listin... DIY Shop Hydraulic Press Brake Weld-It-Yourself Kit: rathasochenda.com/product/com...

@Damiandc1440 5 ай бұрын

Absolutely amazing. I love your videos and I like how you operate, well thought out and professional. Your channel is awesome and I'm happy every time I see that you uploaded a video. Greetings from Romania.

@RathaSochenda 5 ай бұрын

Appreciate it!

@veakrosochhattra3541 6 ай бұрын

Bong Ratha, you are inspiring me on one day becoming a fabicator myself. my wish to bring your achievement to Khmer people to experience locally ❤

@RathaSochenda 6 ай бұрын

That’s awesome respect ✊🏽 🇰🇭

@TookiesShop 6 ай бұрын

His fabrication table sent me straight to my garage to weld my own table!

@veakrosochhattra3541 6 ай бұрын

@@TookiesShop Talking about simplicity and functionality. My brother Ratha is the champ!! !

@morningsideresto 4 ай бұрын

Man. You're amazing. You're skills, attitude and demeanor are the best on YT... Cant thank you enough for inspiring all of us!!! Not only am i learning technically but as someone who often gets frustrated with the learning process, you remind me to CHILL! Much love Man. Thanks again for all of the awesome content ✊

@RathaSochenda 4 ай бұрын

Appreciate it✊🏽

@pangeachoppers 6 ай бұрын

Wow! This set up is so cool! I would be very interested in buying one of the kits

@RathaSochenda 6 ай бұрын

Thanks. 😊 check out my website site for more details on the kit 🦾

@kailuasurfing 6 ай бұрын

This project is AWESOME. Talk about adding precision and repeatability!!

@RathaSochenda 6 ай бұрын

Thanks it was fun one!

@roxifbabyyy 6 ай бұрын

Can’t wait for part three, keep up the great content!!

@RathaSochenda 6 ай бұрын

Thanks 🙏🏽

@nubtools 6 ай бұрын

Very cool. Looking forward to the next video.

@RathaSochenda 6 ай бұрын

Thanks bro!

@KennyB9871 6 ай бұрын

So sick bro! 🙌👊

@RathaSochenda 6 ай бұрын

Appreciate it!!

@andyb7754 6 ай бұрын

Very interesting build, thank you.

@RathaSochenda 6 ай бұрын

Thanks

@billdaniels5957 6 ай бұрын

Very nice job ! You have done a great job on the build.

@RathaSochenda 6 ай бұрын

Thank you!

@tuckervio3189 5 ай бұрын

Good job brother, loved the content!!!

@RathaSochenda 5 ай бұрын

🙏🏻

@Dzon_Jacek 3 ай бұрын

👍

@Ekanselter 6 ай бұрын

Wow! I wish you were my brother and I lived just down the road! Lol

@RathaSochenda 6 ай бұрын

Love it! Maybe one day 😅

@Atlantismonkey40 6 ай бұрын

Just found your channel. Very impressive work, I must say. You’re not asking, but I have a hack for you. That scale is, cool. If you install a couple of pin rods, and an inexpensive magnet. You can remove the device when not in use. I’m going to check out the first part of build. Again nice work.

@RathaSochenda 6 ай бұрын

Thanks

@SegoMan 4 ай бұрын

I use a sharpie which leaves approx a 1/8" line,which is the same as the radius on my punch.

@jayinmi3706 3 ай бұрын

Had an idea, but I don't know if it would ever come in to play. Since the fingers are different widths, would maybe making the back guide slide side to side be a worthwhile upgrade? Can't think of a specific instance, but I haven't needed a finger brake yet.

@RathaSochenda 3 ай бұрын

Yeah I thought about that have it slide on linear guide rails. Left to right.

@mpkleinbreteler 6 ай бұрын

Really nice press brake! :) Have you considered marking bend lines with your plasma torch? The powermax xp series can mark with 10 amps :) (just "cut" only the bend lines first, at 10 amps, then the outlines at full power) This creates a slight groove that you can use for aligning the press die (for example with diagonal bends) You can also mark spots for pre drilling

@RathaSochenda 6 ай бұрын

Interesting. Thanks

@caracarametal 6 ай бұрын

great video, even better press brake! Where do you buy those magnetic square blocks?

@RathaSochenda 6 ай бұрын

Thanks. Square can be found @ genuinemetalworks

@CarstenMoyer 6 ай бұрын

What k factor are you using in your sheet metal bending? There should be some number in your SolidWorks sheet metal settings around .4 to .5 k factor. This may adjust your bend line.

@RathaSochenda 6 ай бұрын

I’m just using the default k factor of .5 but I think I may have to adjust it per material and thickness

@Ekanselter 6 ай бұрын

Because the Vevor Pump has only a 2 gal tank are you concerned that the oil might exceed 140 degF during production runs? Do you think a digital temp gauge with a probe in the tank would be a good addition?

@RathaSochenda 6 ай бұрын

I did runs of 30-50 parts. No concern at all really. Maybe if I did more but honestly if I’m doing like 1000 units I’m outsourcing it

@Sera_Reading 5 ай бұрын

Where did you get your burnout table from?

@RathaSochenda 5 ай бұрын

Arclight

@elegymusic 6 ай бұрын

add roughly half the thickness of the piece per 90 degree bend typically. Ex. 14 gauge aluminum is .080 thick and your bend allowance for 1 bend is .032 2 bends is .064 3 bends is .096...etc

@RathaSochenda 6 ай бұрын

Good to know

@elegymusic 6 ай бұрын

@@RathaSochenda edited my response