Diy Hyundai Santa fe oil change

Рет қаралды 105,789

7 жыл бұрын

If a MECH A NIC video helped you consider donating to my patreon account to help support the channel. / the_mech_a_nic
or my paypal
paypal.me/jonathanrenteria1986
THE MECH A NIC’s amazon store ,here’s the tools I use
www.amazon.com/shop/themechanic
THE MECH A NIC’s Instagram page
/ the_mech_a_nic
THE MECH A NIC’s facebook page
/ the-mech-a-nic-1356996...
Thank you for watching my video, I appreciate the support !
learn how to change the oil on your hyundai santa fe and save a few dollars.Leave a comment on how your oil change went. Thank you for watching.consider subscribing.

Пікірлер: 32

@themechanic6117 7 жыл бұрын

Be sure to follow on Instagram for extra content and behind the scenes. - instagram- - -> instagram.com/the_mech_a_nic/

@THEBRONZE1231V 4 жыл бұрын

So very helpful!

@akabrian1011 5 жыл бұрын

Thank you your teach

@hamidahmed8076 3 жыл бұрын

What's the size of crush washers that would fit a Hyundai Santa Fe ?

@leeisenberg 2 жыл бұрын

Good, No aggravating splash cover to take off? Hope so. Do u know what V6 engine this is, 2.7, 3.3, or 3.5L? Thanks for sharing. - take care man

@suteners2111 5 жыл бұрын

how to change gearbox oil?

@joehyundaitech7961 7 жыл бұрын

Very good video

@themechanic6117 7 жыл бұрын

+JOE FORD DIY thank you,yes I got your message. Thanks for watching and commenting.

@mikeburdett8551 2 жыл бұрын

Awesome shirt!

@themechanic6117 2 жыл бұрын

🤣👍thanks

@joehyundaitech7961 7 жыл бұрын

I sent you a pm let me know when you get it. good idea putting a little tape on the threads to stop the leak. did it work ?

@themechanic6117 7 жыл бұрын

+JOE FORD DIY yes, the tape did the trick.

@joehyundaitech7961 7 жыл бұрын

what engine size do you have ? and it looks like you need a new oil pan gasket

@themechanic6117 7 жыл бұрын

+JOE FORD DIY this Santa fe belonged to a customer.its had the 2.7 in it.

@jimvetromila4562 5 жыл бұрын

So we're all standing around drinking beer while Lenny is putting in oil after draining the pan. Note: its a custom 10 quart pan on a highly modified big block Chevy. So my friend Ron looks down and notices we are all standing in a puddle of oil. I guess you know what Lenny forgot to do. 😨😂😂

@themechanic6117 5 жыл бұрын

😑🤣🤣

@carlovanrijk4039 3 жыл бұрын

Jim Vetromila, I laughed at this, only because I’ve been guilty of doing this too. Ehhh, you live and you learn! 😊

@tatoprada 7 ай бұрын

Cambio filtro aire Hyundai Santafe 2010

@mandreatodd 2 жыл бұрын

Is it the same for a 2007 Hyundai Santa Fe???

@themechanic6117 2 жыл бұрын

Yes it should be

@gustavomarchan3515 7 жыл бұрын

What happened to "hey guys what's going on?"

@themechanic6117 7 жыл бұрын

Gustavo Marchan 😂

@wilespinoza8530 6 жыл бұрын

Teflón nooo

@themechanic6117 6 жыл бұрын

+Wilson had no choice but don't go crazy with it so it doesn't end up in the engine

@jimvetromila4562 5 жыл бұрын

NOOOOO !!

@RexyFan 4 жыл бұрын

Why ? I’ve never used it. But it seems a good idea.

@joehyundaitech7961 7 жыл бұрын

it was leaking because the crush washer needs to be replaced

@themechanic6117 7 жыл бұрын

+JOE FORD DIY yeah, that's most likely. It's not my car ,it was a customer's.

@1188clean 5 жыл бұрын

wrong!

@whitecapmadness7181 6 жыл бұрын

Wiping all the road dirt on the oil pan over the drain before the drain plug is installed? NO!

@themechanic6117 6 жыл бұрын

Lol stop nitpicking , it's not like I pushed dirt into the drain hole 😂🖐