DIY Laundry Room Pedestal

Рет қаралды 250,844

5 жыл бұрын

Make things easier on your back while also adding some storage area and style to your laundry room with this easy DIY Laundry Room Pedestal.
I followed the directions in the Winter 2018 Family Handyman magazine. You can find it on page 68. I made some modifications to the size on the openings to fit the area I would be installing it better. This plan is easy to modify if you need to. Directions were a little tricky in parts and I had to improvise a little but overall the plans were great and the finished product is solid, quality, and looks so good.
You can also find online instructions here: www.familyhandyman.com/woodwo...
Materials:
Plywood: homedepot.sjv.io/0v6RJ
Titebond 2 Glue: amzn.to/3cwqWRZ
Parchment Paper: amzn.to/35Y2E0G
Blue Brush: amzn.to/2LsSSdK
Larger Screws: homedepot.sjv.io/okK5m
Smaller Screws: homedepot.sjv.io/RMr2b
Laundry Baskets: amzn.to/2LEd10F
I am not an expert, just a regular woodworker, sharing my experiences with you. This is meant for entertainment purposes only.
Please note that if you purchase from the links I provided above I will receive a small commission from the company for suggesting them. This will not cost you anything but helps me to pay for these projects and my time to provide good content to my viewers. Thank you in advance.
- Michelle
Music: www.bensound.com

Пікірлер: 214

@piranhafishing 2 жыл бұрын

Nice work! Great to see your daughter helping too!

@MidwestCoinHunter 5 жыл бұрын

Like this design, Very impressive! Need to build one of these for our front load set.

@8andsk835 4 жыл бұрын

I built one this week using your video and the cut list from the magazine. I appreciate you making this video. Turned out excellent!!

@AroundtheHouse 4 жыл бұрын

Yay, this makes me so happy. So glad it turned out good. Thanks so much for sharing.

@cdgmalone 3 жыл бұрын

So glad I found this! My fil is teaching me to use power tools and he told me to pick some projects! So excited to try this

@AroundtheHouse 3 жыл бұрын

Wonderful! This is such a useful build that totally changes the room. So exciting that you are getting into building, it's so much fun. 😊

@rajanmurkute 4 жыл бұрын

Absolutely amazing! It looks solid and definitely adds aesthetics to the laundry room.

@AroundtheHouse 4 жыл бұрын

Thanks Rajan 😀

@brandonjayne4836 5 жыл бұрын

Great job looks amazing

@mildwire 3 жыл бұрын

Thank you for sharing! Amazing work and wonderfully detailed with references to build.

@AroundtheHouse 3 жыл бұрын

You’re welcome, thanks for the thoughtful comment.

@DONphantasmo 4 жыл бұрын

Wow, amazing job. the box construction is nice, but then that trim really sets it off. Gives it a very professional look... Great work!!!

@AroundtheHouse 4 жыл бұрын

Romeo's Relics thank you 😊

@sarahmackinnon6152 4 жыл бұрын

Awesome! Thanks for sharing. I also love that you had little ones in helping with cleanup (as you go!). Great for those of us with a gas dryer in CA that need to have 18" by state law.

@AroundtheHouse 4 жыл бұрын

Oh wow, I didn’t know that was a rule. So glad this was helpful. Have fun building Sarah 😀

@sarahmackinnon6152 4 жыл бұрын

@@AroundtheHouse Yeah - apparently if Home Depot delivers your gas dryer, they will NOT install it unless you have it stacked (we did initially) or an 18" shelf. Standard pedestals are 15" It's meant to help alleviate the risk of explosion from vehicle impact + if there is a leak, gas pools to the ground. Having dryer on the ground = hazard due to ignition. 18" is safer.

@stevesmith9173 3 жыл бұрын

GREAT job. I'm VERY, very impressed!!!

@enyaw1948 5 жыл бұрын

Real nice work !

@ellainemacapilit2384 5 жыл бұрын

looks beautiful and sturdy! I love it!

@suesue242 5 жыл бұрын

Wow handy woman. I love this!

@sunny3560-e6y 4 жыл бұрын

Great work, this is the style I like and I plan to build one also.

@AroundtheHouse 4 жыл бұрын

Sunny Xiong thanks for commenting, I’m excited you’re looking at building it. Be sure to check my description, I linked the plans there.

@DIYMinded 4 жыл бұрын

Great project. Thanks for taking the time to film and edit it. Subscribed!

@AroundtheHouse 4 жыл бұрын

You’re welcome, thanks so much for the sub 😀

@geh8553 3 жыл бұрын

Very nice job looks great

@darniusterix5774 3 жыл бұрын

Awesome family project!

@AroundtheHouse 3 жыл бұрын

Thank you!

@MileyonDisney 3 жыл бұрын

Cool design, well-constructed.

@AroundtheHouse 3 жыл бұрын

Thanks Miley 😊

@you78mas 3 жыл бұрын

Thank you for the video! Awesome work! 👍🏼

@AroundtheHouse 3 жыл бұрын

Glad you liked it! Thanks for watching 😊

@RedboneUnincorporated 3 жыл бұрын

Very nice! e Exactly my plan, and now I have a reference. Thank you!

@mikea953 5 жыл бұрын

good job like that color gray but my favorite light brown wood. its okay like Ur color gray smile

@rudianger123 3 жыл бұрын

I really like this one!!! Nice job

@AroundtheHouse 3 жыл бұрын

Thanks so much 😊

@clemmcguinness1087 2 жыл бұрын

Your work is very neat

@knightofcydonia1192 4 жыл бұрын

This is sweet!

@fasteddie9475 3 жыл бұрын

Really enjoyed the video, you did an awesome job, THX.

@AroundtheHouse 3 жыл бұрын

You’re welcome Edward 😊

@1waukesha 3 жыл бұрын

Thats is one dam well built unit! You could park a truck on that. Good job!

@AroundtheHouse 3 жыл бұрын

😆 thanks for the comment

@mkuzumaki 5 жыл бұрын

Awesomeness very Awesome! You Rock!😊

@AroundtheHouse 5 жыл бұрын

mkuzumaki thank you 😊

@trumpetvids 5 жыл бұрын

Outstanding craftsmanship.

@AroundtheHouse 5 жыл бұрын

trumpetvids thank you 😊

@missannie8012 4 жыл бұрын

Really nice job. I want all your toys!!!

@AroundtheHouse 4 жыл бұрын

🤣 Great comment Annie

@dr.shehab 3 жыл бұрын

Followed your design and built a similar pedestal but updated the dimensions. Thank you

@AroundtheHouse 3 жыл бұрын

Nice! So glad this was helpful. Thanks for sharing and happy building Mohamed 😊

@johnmandra5112 5 жыл бұрын

Very nice job but I was looking for something simple. If you have the time, then this is great. I think I might go buy the 27" stands now and just build some 2" platform extra. The above I guess will put me in the same range of just buying from the store. Time/Money

@JaeTeaEl 5 жыл бұрын

Love love love this pedestal ;-)!

@messilopez411 5 жыл бұрын

she don't put in the link what size of screw she use for it

@AroundtheHouse 4 жыл бұрын

Darn, sorry I forgot that. I think I used a 1 1/4 but I'll need to rewatch and update.

@cyber5006 3 жыл бұрын

Wow...excellent job

@AroundtheHouse 3 жыл бұрын

Thank you 😊

@miltonnegron65 4 жыл бұрын

Great job !!!

@AroundtheHouse 4 жыл бұрын

Thank you 😀

@DanaDeLongWenzell 2 жыл бұрын

love it!

@micmoralez 3 жыл бұрын

Can't to start on my wash and dryer project. Loved the video

@AroundtheHouse 3 жыл бұрын

Thanks for the comment, have fun with the build. 😊

@lydvincecruz824 2 жыл бұрын

Very nice.You're amazing.

@geosautodetail6640 4 жыл бұрын

Great Idea! 👍

@AroundtheHouse 4 жыл бұрын

Thank you 😀

@CCB09 Жыл бұрын

Wow just wow

@mowgod7142 Жыл бұрын

Love it, going to build one this weekend thank you.

@AroundtheHouse Жыл бұрын

So great to hear it, hope your build goes well.

@mowgod7142 Жыл бұрын

@@AroundtheHouse yes it did thank you

@susiekohl6573 4 ай бұрын

Nice! Great video--I''m going to try this myself!

@AroundtheHouse 4 ай бұрын

So glad I inspired you, please let me know how it goes

@katiebelmont595 4 жыл бұрын

Very pleasantly surprised to find your video. I'm partway into building a pedestal from the exact same plans! Your clamping technique worked a lot better than mine. 😅 And I'm to the point of adding the bottom piece of ply and haven't glued anything. I'm too terrified that I'll mess something up for glue. 😭😅

@AroundtheHouse 4 жыл бұрын

That’s so fun you’re building using the same plans. I did find they left out some small details that I really had to think through. Clamping is always a bit tricky with something this big. Have a great build and thank you for commenting 😀

@rmadrigalb 4 жыл бұрын

Hey, very nice video. I liked to see you working. Good

@AroundtheHouse 4 жыл бұрын

Thanks so much for the nice comment Ron 😀

@JohnGalek 3 жыл бұрын

Nice job!

@AroundtheHouse 3 жыл бұрын

Thank you! Cheers!

@lsmythe007 4 жыл бұрын

Great example. I can copy. Thanks.

@AroundtheHouse 4 жыл бұрын

So glad you feel confident to build your own after watching. 😀

@Newswithfatima 3 жыл бұрын

great mom great work.nice friend

@AroundtheHouse 3 жыл бұрын

Thanks 😊

@enzobolognese5115 4 жыл бұрын

Beautiful work! Now my wife wants that too..... :-)

@AroundtheHouse 4 жыл бұрын

To funny. Guess you better head to the shop. 😆

@sonicam53 4 жыл бұрын

very nice work. You put a lot of time in this, but it look really nice.

@AroundtheHouse 4 жыл бұрын

Thank you Sonica

@RickMaxon 5 жыл бұрын

nice build. love the sturdy build, choice of materials 2 modifications I'd make. 1 add a waterproof tub to the top for that day you hope never comes 2 bolt the w/d to the base like all the bases sold in stores. Washers especially like to walk around.

@AroundtheHouse 5 жыл бұрын

Rick M. Thanks for the feedback.

@jmannsvideos 5 жыл бұрын

Rick - can you share what you did to bolt the machines to the pedestal and how this worked with the waterproof tub.

@AroundtheHouse 4 жыл бұрын

J Hoffmann sorry I just saw this. I didn’t bolt them on or put in a tub.

@haroldclark4485 4 жыл бұрын

Perfect.

@AroundtheHouse 4 жыл бұрын

Thank you 😀

@shannon2740 3 жыл бұрын

Thank You!!!

@AroundtheHouse 3 жыл бұрын

No problem

@j.singhluckylucky7545 2 жыл бұрын

Great mam u r GENIUS

@ThatGuy-vi8ch 4 жыл бұрын

This is too big for my particular setup. However, I think I can make this work as two halves. I have a sink in between the two, so I need two platforms. Edit: You also have an insanely impressive plethora of tools.

@AroundtheHouse 4 жыл бұрын

This would be a great modification, good idea. Most of my tools were bought off Craigslist and some weren’t running so I got them for a great price. Just a tip if you’re looking to grow your collection. 😀

@TheHord 3 жыл бұрын

Thanks for the video/instruction. Just bought a new washer/dryer, front load, replacing our 20 year old set. I'm not sure I can do this project, but you make me want to try and save money... the model brand pedestals are expensive.

@AroundtheHouse 3 жыл бұрын

I agree, I don’t know how or why they charge so much for them. Enjoy your new washer/dryer 😊

@TheHord 3 жыл бұрын

@@AroundtheHouse Thank you. 🙂

@dangettinger1692 2 жыл бұрын

In the process of building one based on this video. Two questions: (1) what size nail are you using in the nail gun (2) what is there make/model of your dowel jig?

@Cordovarubio 2 жыл бұрын

I love the design, I just wonder what’s the weight capacity, how strong is this set up….

@ocguyinoc263 4 жыл бұрын

Came across your video and am attempting this project this weekend. Thanks for taking the time to document your project. It will be invaluable to me over the next two days. I'm curious what you went with for the overall total height of your pedestal? Also I was curious what the purpose of the recess of the kick plate is for? I noticed you covered the gap with a trim piece at the end of your video.

@AroundtheHouse 4 жыл бұрын

This is a great project to tackle right now. I made it about an 1" or 1 1/2" shorter to fit the space. Sorry don't remember exactly. Good call on the recess kick plate. I just followed the directions but I'm with you, I think it'd be better if it wasn't recessed so that you can nail to it. Good luck on your build 😀

@toney0107 4 жыл бұрын

@@AroundtheHouse the link for the materials does not work. Can you share them?

@justinechacon845 5 жыл бұрын

i have the same washer and dryer, what dimensions did you use ?

@AroundtheHouse 5 жыл бұрын

Then this would be perfect for you. I custom made mine for a friend so the height was a little smaller and now I can't remember but the plan is for one 58 1/2' long x 31 1/2' deep x 18 1/4' tall. The full plans are in Family Handyman Winter 2018 page 68. Please send me a picture if you build it, I'd love to see it.

@Joeyarteaga 5 жыл бұрын

This is the nicest build I've seen so far. Why does everyone else use 2x4s or 4x4s? Is it really necessary? How is the vibration for yours?

@AroundtheHouse 5 жыл бұрын

Joey Arteaga Thanks. I built this for a friend so sadly I can’t give my personal review. I followed up with him and he said it’s built rock solid. It has a little vibration but he thinks it’s due to uneven floors. I hope that helps. I’ll try to get over and check it out soon.

@patriciam3079 4 жыл бұрын

I’m surprised this is strong enough to hold the weight of a full washer. The matching pedestals are too high for where my washer has to go. (The door wouldn’t be able to be opened all of the way 😲). Has anyone else built one from this video? TIA for any useful feedback.

@AroundtheHouse 4 жыл бұрын

The nice thing about the plans I followed here is that you can customize them. In fact I talk about how I made them smaller in height in this video. Hope this can help you with your project. 🙂

@elonmusk8667 2 жыл бұрын

How did you lift the washer and dryer on top of the pedestal?

@hassantaylor-6thdayphotogr630 3 жыл бұрын

The heck this helper been the whole time??? 🤣🤣 Got more help from the little woman of the house than him.. Haha. Looks great though!!!

@AroundtheHouse 3 жыл бұрын

🤣 Thanks for the comment Hassan.

@ilgal9663 4 жыл бұрын

Hi. Beautiful work. I am wondering how you got the washer and dryer up on the pedestal once it was built?

@AroundtheHouse 4 жыл бұрын

I enlisted some friends lifting and positioning it everything. Thanks for commenting!

@granthenderson2146 4 жыл бұрын

Hulked them... See her guns 😎

@HelloNNNewman Жыл бұрын

Hi - Thanks for the great video. Now that this has been in place for a few years - how stable has it been? My main concern was looking at the video how the bottom brace against the floor was not directly supporting the 2 braces/separators in the middle compartments supporting the top. Any issues with stability or warping since the build?

@AroundtheHouse Жыл бұрын

Great questions and yes always good to check in after a few years. This is still being used and has held up great. No sagging or wobbling. Still solid.

@marcotardio5831 Жыл бұрын

The trim work is nice. Personally I would build a 2x4 frame first to support the weight. How do you prevent the machines from vibrating off of the platform.

@AroundtheHouse 9 ай бұрын

My friends machines haven’t had issues vibrating however that is a good thing to think about as I know some do.

@miguelgarcia-vg1fh 2 жыл бұрын

Can someone please share the materials list. The link does show the list

@mikeharper7171 3 жыл бұрын

May I ask what music you used as the background? It totally compliments this video! Thanks!!

@AroundtheHouse 3 жыл бұрын

Thanks Mike. I don’t remember exactly but I get all my music from www.bensound.com and it’s free. 😊

@simpledimplez 5 жыл бұрын

Hi, do you mind including the material list? I would like to attempt this. Nice work!

@AroundtheHouse 5 жыл бұрын

simpledimplez I’m excited you are trying this build. Happy building. You can find a whole list of materials as well as more details on the build on page 68 of this link: online.pubhtml5.com/vfof/wdgh/

@TheGunner9545 4 жыл бұрын

@@AroundtheHouse Both links for materials wont load. Says publication not available.

@nealwatts9602 3 жыл бұрын

@@AroundtheHouse Publication not available

@Sevans-sb1pv 2 жыл бұрын

Love the music. It makes me feel like Axel Foley. 😂

@krissyd3391 3 жыл бұрын

Beautiful 🥰 I'm buying a set tomorrow and don't want to pay 300 for their pedestals

@AroundtheHouse 3 жыл бұрын

I hear you Kristina. Crazy they charge so much for plastic stands huh? 😊

@Livindaybyday 5 жыл бұрын

Wow, this looks great and you did an excellent job! Would love to try that, but don't have all those tools! 😅

@AroundtheHouse 5 жыл бұрын

Debra Rainey you should totally try it. If you don’t have a table saw you can always use a circular saw. I clamp a 2x4 to it to get a straight line. You could also use the circular saw instead of the miter saw. I should do a video on that 😊

@Livindaybyday 5 жыл бұрын

@@AroundtheHouse Thank you! I may try using different tools. Love it!

@richardgilmore5607 4 жыл бұрын

This could be a good summer project for me in my garage. However I worry on how to lift the two units into place on top. They are heavy and two persons might not be enought and there no space to get hands underneath. Please advise how you did the lifting.

@AroundtheHouse 4 жыл бұрын

This was a very real problem Richard. I got these all made and delivered to my friends place thinking the appliance delivery people would set them in place but they couldn’t due to regulations. My husband and friend used lifting straps to put them in place.

@richardgilmore5607 4 жыл бұрын

That's interesting. Not sure what a lifting straps was and googled it. Those that want to know here the link. www.amazon.com/Shoulder-Dolly-Moving-Straps-Efficiently/dp/B00022749Q/ref=mp_s_a_1_4?dchild=1&keywords=lifting+straps&qid=1590322425&sr=8-4. I think I will go ahead and when the time comes figure it out. It going to be a small room and worst the new appliances will already be inside that room before install.

@tinman1955 4 жыл бұрын

Nice work...but how did you lift the laundry machines up to the platform?

@AroundtheHouse 4 жыл бұрын

I enlisted 2 guys. Important to note, the appliance delivery guys will not put them on it since they don’t want to be liable for anything. So you will have to lift the appliances on yourself 😩

@greatgrandpaswoodworking 3 жыл бұрын

Is your dryer gas or electric. I would think gas flam might heat up the wood. I have gas dryer and have hesitated making my own.

@RoseRose-cw5be 2 жыл бұрын

Where is the buy list?

@gsambolin 4 жыл бұрын

OMG I am impressed ! Came out very nice. How did you handle the Duct for the Dryer? Did you have to make a hole into the back top portion of the pedestal to connect it to the wall or was your duct connection on the wall higher than the pedestal? New SUB

@AroundtheHouse 4 жыл бұрын

Great question Gilbert, I never thought about it but others may face this issue as well. The dryer duct for the one I made was hire on the wall so even with the pedestal it connected right in. I didn’t need to cut a hole. So happy to have you as a sub 😊

@gsambolin 4 жыл бұрын

@@AroundtheHouse Yes there are 20 different ways to connect a Dryer to the Dryer vent so it could be anything from a 5" hole or a square notch for to 90 degree angled vents. My vent is closer to the floor so I would have to cut out a hole on the top and back side of pedestal. Thanks again.

@jamesobriant1417 8 ай бұрын

Can you build pedestal using shelf frames

@AroundtheHouse 7 ай бұрын

Great question, I’m not sure.

@bbqmadeeasy9576 4 жыл бұрын

Was there a purpose for the toe kick? You covered it with trim

@AroundtheHouse 4 жыл бұрын

Very good observation. You know I’d have to agree with you. Not sure that was really necessary. 😀

@4justinBrewer 4 жыл бұрын

Hey what’s the paint color you used? And what brand

@AroundtheHouse 4 жыл бұрын

Sherwin Williams Functional Gray SW7024 😊

@fadedglory1045 3 жыл бұрын

Love this. Is the toe kick for esthetics ? Could it sit flush?

@AroundtheHouse 3 жыл бұрын

You probably could if you didn't want to trim it out with something else. Good call 😊

@fadedglory1045 3 жыл бұрын

@@AroundtheHouse was also wondering is castors could be added? I try not to bug my daughter and I could roll it out to clean or retrieve a fallen item. Heavy duty ones that lock. What do you think? This is my favorite and I’ve been binge watching for a week to get a plan for my daughter to go by.

@Brando022009 4 жыл бұрын

Beautiful. May I ask what trim did you use?

@AroundtheHouse 4 жыл бұрын

I used pine boards, however poplar would be a better choice. I didn’t know then what I know now. Poplar is a better quality wood.

@Brando022009 4 жыл бұрын

@@AroundtheHouse What about the sheets of wood that you used in your video. Would you use the same again? Again, thank you

@lthegr81 4 жыл бұрын

I need this 😥

@AroundtheHouse 4 жыл бұрын

You should build one 😀

@bawbveenyo 4 жыл бұрын

Great work on a marvelous looking pedestal. I would strongly recommend NOT wearing flip flops in the shop and especially not around heavy wood products. I've seen too many painful outcomes.

@AroundtheHouse 4 жыл бұрын

Great tip! Thanks for the comment!

@n3qdz 4 жыл бұрын

You build like a girl! Like a badass righteous girl! Totally awesome build your hubby married up! Time to upgrade to Makita with skills like that! Congratulation on a great build....BTW I think I might build it but add pull out sliding trays for the soap and stuff.

@AroundtheHouse 4 жыл бұрын

Thanks so much 😀. Pull out trays would be so useful. You could really maximize the space that way, great idea.

@wandaatkins3951 3 жыл бұрын

ok, how did you get the appliances on the pedestal?????

@AroundtheHouse 3 жыл бұрын

Apparently Sears was not confident in my craftsmanship so they would not put the washer and dryer on it so I had to enlist 2 guys and those moving strap things 🤦‍♀️

@courtneysherbo2109 5 ай бұрын

Did you attached the washer and dryer to the pedestal?

@AroundtheHouse 5 ай бұрын

I didn’t and it hasn’t been an issue but that would be a good idea since you never know

@cxlmobileheadlightrestorat7906 Жыл бұрын

Why not use caulk on the seams?

@AroundtheHouse 9 ай бұрын

That would definitely make the deems look better. I probably didn’t know it at the time.

@charlesh1 Жыл бұрын

Looks nice, but what happens when the repairman needs to pull the dryer out away from the wall to work on it?

@AroundtheHouse Жыл бұрын

Good call

@justinchase1534 Жыл бұрын

How many trim boards and how many gallons of paint were needed?

@AroundtheHouse Жыл бұрын

Hi Justin, I’m sorry this was so long ago I’m not sure. I believe it was just 1 gallon of paint.

@vipnetworker Жыл бұрын

That looks really nice, but I heard a washer and dryer needs to be bolted down to the pedals. Is this an issue on your set up?

@AroundtheHouse Жыл бұрын

Great question. I built these years ago and was just at my friends house yesterday and they are still going strong without any issues. I’m sure all washers and dryers are different so might be an issue with some. They have the front loaders we have that don’t ever move around.

@watcherdude1330 5 жыл бұрын

It’s great to see a woman building 👍. I’m wondering how the stand is holding up. Ty

@AroundtheHouse 5 жыл бұрын

Mr. B thanks 😃. The stand is holding up great.

@mariadocarmodesousaferreir3503 4 жыл бұрын

Gostaria que tivesse pelo menos uma legenda pra mim entender o que vc está falando.

@AroundtheHouse 4 жыл бұрын

Desculpe, você não foi capaz de entender. Talvez no futuro eu possa encontrar uma maneira de fazer legendas. Obrigado por assistir.

@MrWhitelightning73 5 жыл бұрын

Cost to build 🤔

@AroundtheHouse 5 жыл бұрын

Charles Martel this cost me around $100 to make. Thanks for the question, I’ll try to note that in the future as it can be helpful to know 😊

@bethnilsen601 3 жыл бұрын

What are the dimensions of the pedestal?

@AroundtheHouse 3 жыл бұрын

The plans are for 58 1/2 inches long by 18 1/4 inches deep by 18 1/2 inches tall. I believe I made mine around 16 inches tall since my friends didn't want it up so high, however it was so long ago I don't remember the exact hight. Hopefully it says in the video.

@desaegeranne 2 жыл бұрын

Dommage que vous mettez pas les mesures du bois nécessaire

@valeriedevereux5912 3 жыл бұрын

How long did it take to make?

@AroundtheHouse 3 жыл бұрын

Hi Valerie! It took a week or two to complete - but probably only a couple days of actual work time in the shop! Thanks for commenting!

@AgainstAllOdds357 3 жыл бұрын

You're a badass

@AroundtheHouse 3 жыл бұрын

Thank you 😊

@matt1580 3 жыл бұрын

How does it hold up to weight?

@AroundtheHouse 3 жыл бұрын

So far so good 😊

@matt1580 3 жыл бұрын

@@AroundtheHouse I realize now this is a much better way to build than the way I did. Smh great video

@ezequielcamilo4272 8 ай бұрын

Were are the measurements? 😊

@AroundtheHouse 7 ай бұрын

The full plans with cut lists are linked in the description

@hardkore360 5 жыл бұрын

ive seen a couple of these pedestal videos and I dont get why none have used treated lumber for the base. Folks most of these pedestals will be installed next or close to a drain, where water WILL collect at some point, you dont want the wood to soak up any water and bubble up, then your hard work is trashed in a matter of hours. The paint may help but I wouldnt risk it.