Everyone else talking that they could sort the coins faster. Why don't you appreciate what this man's done with cardboard.

If any of you are actually interested in creating one of these sorters and work with inches, below is a listing of the "centimeters" as shown in the video converted to inches. They are set to 1/64", but you can get as close as you want and I'm sure everything will work just fine. Note: Be cautious when cutting out the "coin drop slots". Don't cut too high!! From smallest to largest: 1.50 cm = 19/32" 2.00 cm = 25/32" 2.50 cm = 63/64" 4.50 cm = 1-49/64" 6.00 cm = 2-23/64" 7.00 cm = 2-3/4" 7.50 cm = 2-61/64" 10.0 cm = 3-15/16" 10.2 cm = 4-1/64" 14.0 cm = 5-33/64" 16.0 cm = 6-19/64" 50.0 cm = 19-11/16" I'm thinking of making one, but I will be changing some of the parts. If I can, I'll post a description of what I've done. Ken H. Sr.

Reminds me of Chuck E. Cheese's Always loved the coin sound XD

Question: How many hundreds of times did you watch this video, and still get it wrong? Me: Yes.

This channel is the DIY number one factor.

I love the Q's diy coin sorters

4:53 Thank me later.

One of those satisfying videos when you watch the money being sorted. Brilliant.

HINT: About the boxes which will hold the sorted coins --- You might want to surround the entire box "set" with 1/4" thick strips of 1/2" to 3/4" wide glued or screwed wood strips. These will hold the boxes in place while using the sorter and will allow the removal of the boxes when complete (the width of the base may need to be a bit wider). I think I will try this sorter out for my Grand-daughter for Christmas. "The Q" - By the way...what DIA. or R. did you make the center "paste board" (...brown) circle? (4:03) It looks like it really doesn't have to be exact, but I'd like to use the same dimension as you did.

One of the few channels who’s thumbnails aren’t clickbait.

Great looking project/result! Congrats!!

0:48 have -_-

Give this man a bucket of legos and he'll make a m249 in 5 seconds

Congrats to 150 videos!

This comment was added in here just as a product suggestion for those of you who need a sturdy, flat surface for projects like the one above. I was at our local "Dollar Tree" store (everything is a dollar) and ran across some clipboards. They measured 1/8" x 9" x 11" of useful surface. There is a steel clip at the top which would take your nails off if you're not careful ! (Use it as a clamp). 1/8" is a nice size for those smaller projects. They are made from sort of brown, fibrous mat'l. Let me know if you find any.

I love this soundtrack too

I remember the good old days when you could build everything out of cardboard I liked my own comment ‘cause nobody else would

The time u took to make this machine, I would have finished sorting those coins.lol

I will easy to put proper order places amazing Idea THE Q

Has anyone found out that Q means? I think its Quickbuilder

Why do I feel like someone watched this in slow motion to see if even 1 coin went into the wrong one

You should make the boxes taller from left to right. It will prevent the coins falling into the wrong boxes and also smaller value coins are usually more than higher ones, meaning more space for these at the same time.

No one just sorts the coin. We sort it so that we can count it, so what about adding a coin counter to this machine? It would be amazing!

The Q is better than me in D&T

Stunning!!! What are the angles of inclination?

Awesome Idea.✌️

0:48 did you see? -_-

Good but coins in Australia are weird and you would have to do multiple machines in that time it’s just easier to sort out by hand

какое полезное изобретение...как-же я жил до сих пор без него ?!

thank you now i know now to count my money ty for your idea

0:09 this man’s laptop is so fast it startups and just automatically takes you to wid

Instructions were unclear... Accidentally made an atm machine

Verry good

I love it!!!😉😉

Supplier: How many cardboard do you need? Q: Yes.

Very very very very very very good bro

Думаешь мы не распознаем грывню ?

*Rich Man* : "WE NEED THIS!"

Wow so cool, i need make it for me)

I've seen him spending all of his coin for cokes in the vending machine.

hehe lubię placki XD a tak ogólnie fajny pomsł

Amazing video! I love it!

Прикольная копейкосчиталка

This is really cool. Something to do with your kid on a weekend. The biggest issue is that he was trying to solve the problem of counting how much money he had. This machine, while great for sorting, doesn’t count. He’s still going to have to go through each box and count them and then add it all up. Definitely cool, but spending time and money to add another step?

Great coin machine! Now, how to use it??

How good does it work with coins with nearly similar size (e.g. 0.50 RUB and 1.00 RUB)?

“It doesn’t cost that much” *Has to make a literally machine because he has too much money to count by hand*

great work

Do you make a coin sorting machine with same diameter, but separating the two different colors like silver and gold?

The Best

Sei un grande

Only OG's remember to the old coin machine 😎:-)

Nice one 👍

Next up: making bill sorter machine xD

手動ってことがまた良い

Are we even allowed to try this to

Копійка гривню береже😉 . А винахід 👍 класний !

For everyone saying “the time it took you to make this machine i would have already sorted the coins” think about it like this you just wipped out this machine from your basement and put your coins in and bam or maybe your mr beast and you have to sort out 1000000 pennies

get rid of all the holes on the track slap a neodymium magnet on the end of the track and force the coins out of the end instead of the bottom and you could have a mechanical copper penny sorter

Que massa!! Engenhoso demais!! E difícil de fazer tbm kk

Cool but seen 10 cent piece fall Thur the 25 cent slot when they build up it pushes then further down and they will all Thur any hole

Yo he builds super cool things

If you want it automatic you can add small motor eith potentiometer.

How Do you get this idea?

Wonder how long it took to wash off the sharpie or marker after flipping the cap off.

офигенно!!!

that is very good. i need that

Fajny film

Super bro

Me: BRUH I SUCK AT MATH Also me: WaIt... i CaN bUiLd A mOnEy SoRtInG mAcHiNe Bc Im ToO lAzY tO sOrT tHem

It's amazing 😍

Cool video😉😃👆🏻👍🏼

Bien 👍

you sale this project?

great idea.

What size drill bit?

But I do wonder, what about if the coin accidentally, being pushed by the followed coin and unsupposedly put on the wrong container? Especially, the bigger value, 25 -> 50, 50 ->1. In case, if we put the coins forcefully on a big amount.. Sorry, I am not a English native speaker, so my sentences are not so good..

Super bro 👌

That is genius.

video work good

Опа знову гривні :) про те чудова конструкція Yay its a UAH but it's cool construction

Hello, if these are euro coins, the arrangement should also be correct, since the 50 cent coin is larger than the 1 euro coin, which means that the two should be swapped, greetings from Austria Karl

Skip to 4:28 if you dont want to watch the whole video

Now for me that i get a ton of coins too i can get behind this one

So like v3.0 ?

He made a lot of cool things like big candels and more THE Q is more better than mini gear cause THE Q makes more cooler things

I want to purchase this machine..pls telme sir how much

I will try to make it

Awesome

Oof I really want to get some gold coins (clearly not from the same region) they are so cool, and pretty!

Du er best

I think wood part can be also made of cardboard

Whats the thicknes of plank?

In der Zeit wo ich das gebaut hätte, hab ich das Geld schon gezählt...😂😂😂

that awkward moment when you have a black line on your thumb for making a slow motion video ( 4:17 ) :p

WOW THATS JUST AMAZING JUST WOW!!!

Wow super

If I had done it with your hand by the time that I worked out this verse and it was the same as some I am Abdullah from the Republic of Yemen😂😂😂

Now my parents don’t have too struggle looking for the right ones when shopping

what about nickles?