Рет қаралды 36,560
I needed to get my helmets out of a closet and on display, so naturally I spent a whole day making display stands for them.
Build Bits!
=================Hardware=================
Birch Plank:
tinyurl.com/yy...
3/4 inch hardwood Dowel
tinyurl.com/y4...
I picked up all the black iron in the video from Home Depot at a much higher price :)
For 1 stand you need 2 flanges, one 11 inch plank, one 3 inch dowel, one of each nipple, and a 45 degree elbow.
20 - 1/2 inch floor flanges:
amzn.to/3j1fSzq
10 - .5 x 1.5 inch nipples
amzn.to/33OTuDh
10 - .5 x 2 inch nipples
amzn.to/3iK3cwV
6 - .5 inch 45 degree elbow
amzn.to/35RTXHh
Screws for helmet platform:
amzn.to/3mDIl0u
=================Consumables=================
Danish Oil:
amzn.to/3mOxRf4
Tightbond 2 wood glue
amzn.to/3j1fSzq
=================Tools=================
Flexible bit extension:
amzn.to/32O11mn
3/4 Spade bit
amzn.to/2HaQCJ4
======================================
Check out my Lithuanian brethren's stand that I almost went with!
amzn.to/3kAffNV
Tees & Stickers:
teespring.com/...
Music:
Bankrupt Beats
( / bankrupt-beats )
Retnik Beats:
(www.youtube/c/...)
The amazon links above are affiliate links and the proceeds go right back into the channel!