DIY Oil Change - Toyota Land Cruiser 200 Series

DIY Oil Change - Toyota Land Cruiser 200 Series - No Mess!

Рет қаралды 44,975

5 жыл бұрын

This is an easy oil change on my 2008 Toyota Land Cruiser 200 Series 5.7 liter gas engine - using a Jewett Performance filter housing and EZ oil drain valves. Toyota 0W-20 Synthetic Oil

Пікірлер: 34

@S3th02 3 жыл бұрын

Love the vids , look forward to more maintenance. So few vids for the 200 series

@billkilgore9798 5 жыл бұрын

Very helpful and thorough. Thank you,

@maxgermasi3302 3 жыл бұрын

You made a very good video, thanks a lot. Make some more please.

@christianchilee 5 жыл бұрын

found your video link at iH8mud... Looking forward to doing my own oil change once Jowett's man-jewelry is back in stock. Thank you for making the DIY vid!!!

@fatasterisk7939 4 жыл бұрын

Yes sir! Thanks for watching!

@orion-viikhmernight2748 2 жыл бұрын

Hi there I’m new subscriber. Thanks for the tip.

@philipbaio2237 2 жыл бұрын

Great video where did you buy the oil filter wrench

@docwyte 2 жыл бұрын

Do you have the part numbers for the EZ oil drain valves?

@miketungol5736 3 жыл бұрын

Thanks for sharing. 1 comment, you have to hold the torque wrench on end of the handle, not in the middle of the body/shank as you did, to get the proper accurate moment-arm torque applied.

@fatasterisk7939 2 жыл бұрын

Thanks Mike - you are correct - and I normally do. I just couldn't do it while holding a camera at the same time!

@lalithsam2897 Жыл бұрын

I would buy this guys used cars

@kylemorain8069 2 жыл бұрын

Are you still driving this car and how many miles do you have on it now?

@ssing7113 10 ай бұрын

Thanks. Mine came with no instructions. No instructions on website. I got it after a while but would have been nice if they had a video showing how to get tube out of old housing and installed on new one

@amychong9073 Ай бұрын

where can i buy the modified filter housing ? Can I have the part number ?

@errbodyknowsdarules 3 жыл бұрын

993 or 964?

@nathanviglione2757 6 ай бұрын

Wust is that you?

@alvaro1810 4 жыл бұрын

Where did you get the brake lines??

@fatasterisk7939 2 жыл бұрын

Hi Alvaro - I'm sorry for the late reply. I ordered the brake lines from a company called Crown. You can specify the length and the types of connectors, etc... If I recall I ordered stock connectors, but +3" rear and +2" in front.

@RobertCarrizal 3 жыл бұрын

how much oil quart

@fatasterisk7939 2 жыл бұрын

I believe my manual states 7.5 quarts including filter - but I would have to check. I think newer LC's call for 8 quarts if I recall correctly. I tend to split the difference.

@986C 5 жыл бұрын

I wish the guy still made these filter housings. I emailed him but it looks like no one is home anymore.

@Rhaspun 4 жыл бұрын

It looks like it might be Jowett Performance

@claudiusthegod 4 жыл бұрын

Ever get a response?

@fatasterisk7939 4 жыл бұрын

Sorry for the late reply - but yes, Jowett Performance did make the filter housing. I had not heard that he has discontinued making them.

@claudiusthegod 4 жыл бұрын

@@fatasterisk7939 Thank you. I bought one and its fantastic!

@986C 3 жыл бұрын

@@claudiusthegod sorry for the late response. So yes, I ended up waiting and watching the forums and was able to purchase one. If you’re interested in getting one, you’ll need to hang around the ih8mud forums where he posts updates on when he will make the next run of these.

@zoezoe610 5 жыл бұрын

Pretty thin oil ,is spec 5/40 ?

@elonsus9747 4 жыл бұрын

zoezoe610 Most new Toyota’s use 0w-20. I agree it’s pretty thin.

@fatasterisk7939 4 жыл бұрын

Sorry for the late reply.....it does seem quite thin but if you are running the Toyota synthetic - I think that is the only option. And as mentioned is it what is specified by Toyota.

@zoezoe610 4 жыл бұрын

@@fatasterisk7939 Many mechanics feel it is too thin for our climate but each to their own. 10/40 for me here in Australia.

@njsongwriter 4 жыл бұрын

@@zoezoe610 I don't understand why people think climate has anything to do with modern oils. I don't care if it's 100°F where you live, operating temperature of your engine is double that. Film strength of the oil is what protects the engine from excessive where. There was a time that viscosity alone provided extra time strength. Not anymore. It's the additive package that provides the film strength. The benefit of lower viscosity us increased flow rate getting the oil to all parts of the tight tolerances engine.

@saadumer1202 3 жыл бұрын

@@zoezoe610 10/40 for me too here in Dubai....although toyota says 5/30....but i think offroading and revving near/abv 6000 rpms on dunes .....i think 10/40 is best ...fuel is cheap so nonworries abt fuel consumtpiton