DIY OVERLAND | $25 Jeep Tailgate Table

Рет қаралды 85,554

5 жыл бұрын

This is my solution to a tailgate table. It's perfect for cooking or holding a small stove. Current tailgate tables are selling online for hundreds of dollars, but they essentially do the exact same thing. I spent $20-$30 on this little project and it's held up great so far.
Follow me on Instagram: @grizzy.gram 📱
________________________________________________________
ARKANSAS OFFROAD MERCH 👕
www.longcreekoverland.com/shop/6
ARKANSAS OFFROAD COFFEE ☕️
www.longcreekoverland.com/pro...
OVERLAND GEAR & ACCESSORIES 👨‍💻
backwoodsadventuremods.com/
GUIDED OVERLAND TRIPS 📍
www.expressrally.com/
________________________________________________________
⬇️⬇️⬇️ GEAR & COUPON CODES ⬇️⬇️⬇️
BACKWOODS ADVENTURE MODS BUMPERS 🇺🇸
backwoodsadventuremods.com/
Coupon Code for 10% off: ARKOFFROAD
PATHFINDER LIGHTING 🔆
backwoodsadventuremods.com/co...
Coupon Code for 10% off: ARKOFFROAD
ROCK ROOSTER BOOTS 🥾
rockroosterfootwear.com/?ref=...
Coupon Code for 15% off: ARKANSASOFFROAD
BLACK OPS THROTTLE GRENADE ⚡️
blackopsoffroad.com.au/produc...
Coupon Code for 10%-20% off: BOOMGRIZZY
REVOLUTION RACE APPAREL 👖
www.revolutionrace.com/
Amazon Prime 15% off code: 15OFFROAD
bit.ly/RRPLAYGROUND
HIBOOST 4G CELL BOOSTER 📶
www.hiboost.com/product/trave...
Coupon Code for 20% off: grant20
BOUGE RV FRIDGE/FREEZERS ❄️
Coupon Code for 25% off 53qt Fridge: ARKOFFROAD
bit.ly/3q0Sbvi
Coupon Code for 15% off 30qt Fridge: ARK15
www.bougerv.com/collections/f...
Coupon Code for 15% off ANY Fridge: ARK15 www.bougerv.com/collections/f...
BLUETTI AC200P🔋
www.bluettipower.com/products...
Coupon Code for $185 off: Arkansas200p
BOUGE RV FRIDGE/FREEZERS ❄️
Coupon Code for 25% off 53qt Fridge: ARKOFFROAD
bit.ly/3q0Sbvi
Coupon Code for 15% off 30qt Fridge: ARK15
www.bougerv.com/collections/f...
Coupon Code for 15% off ANY Fridge: ARK15 www.bougerv.com/collections/f...
For daily updates, video clips, and photos, check out my Instagram:
@grizzy.gram

Пікірлер: 135

@Headshot51423 4 жыл бұрын

Definitely going to do something like this instead of spending up to $250 for one! I think this looks a lot better too than the expensive ones.

@outsider1253 5 жыл бұрын

THIS. IS. AMAZING. I’m going to give them a try instead of spending $300 on a store bought table. Great idea and thank you for sharing it.

@hbrhodes1s 5 жыл бұрын

Seriously, y'know? How expensive does a basic tailgate table need to be?

@stevemartinism 4 жыл бұрын

Great idea with the tape, watched 12 videos on tailgate tables (coved 19 blues) . This was one that is easy , practical and cheep. Thanks for sharing. Be safe.🇺🇸

@ArkansasOffroad 4 жыл бұрын

Appreciate it!

@joshdavis9678 4 жыл бұрын

I'm in the middle of making this right now. Just waiting for the stain to dry. Thanks man!

@ArkansasOffroad 3 жыл бұрын

So cool man!!

@nxufishin5998 5 жыл бұрын

Brooo you came through with the video badass!!!!

@FOFBASS1 Жыл бұрын

Yep. Getting parts this weekend. Absolutely brilliant!

@hbrhodes1s 5 жыл бұрын

I like that light switch Awesome ingenuity on the design and implementation, too!

@andrewlynch5620 5 жыл бұрын

Awesome. Thanks for all the details and thoughts. Hearing your troubleshooting really helps

@christopheranichol9982 5 жыл бұрын

Ingenious, this will be the first mod I make on my TJ. Thanks for sharing.

@jacobshields6942 5 жыл бұрын

Great setup and Thanks for sharing I've been super curious about this, since I watched your walk around vid

@rozyboom5328 5 жыл бұрын

Simple and I love the use of magnets over drilling holes! Guess I know what I am going to be building now.

@garyhoskins2798 4 жыл бұрын

This is going to be my first DIY project this weekend - thumbs up!

@terrybtk1 5 жыл бұрын

That's the best and simplest set-up I've seen. Great job!

@mr.bluegrass9723 5 жыл бұрын

nice job . looks good . i like the way that you did this project without drilling a bunch of holes in the tail gate . i have to admit that the light switch had me very curious as to what it had to do with the table , but now i know. great job

@brennanj6405 2 жыл бұрын

This is pretty dope! Thanks for the vid!! Looking forward to trying this myself

@tobiasshoemaker4250 5 жыл бұрын

Great ingenuity and awesome TJ!! Like the addition of the light switch. Will be doing this on my Jk. Keep up the great videos!

@Gogogordy1 4 жыл бұрын

Totally loving this set-up and your ingenuity!

@stephan5026 4 жыл бұрын

Great video! I’ll definitely be adding a table to my TJ tailgate!

@ksazubbie 2 жыл бұрын

BRILLIANT IDEA!!! I'm so going to do this for my jimny, will have to figure out different way of keeping it upright, but this gives me a great starting point

@LoganLovell 4 жыл бұрын

This is EXACTLY the kind of thing i was looking to do. Thanks for the video!

@mattlewis8713 4 жыл бұрын

Thanks for the idea brother I made me one last weekend for my TJ it’s super simple and very handy. Love your videos keep them coming

@jeremyarchambault 4 жыл бұрын

I loosely followed your video and made a tailgate table for my JK! I did find that one rope on each side limited the torsion on the piano hinge as opposed to one. Great video !!!

@ArkansasOffroad 4 жыл бұрын

Thanks man! Glad you made one. Yeah 2 ropes is probably better in the long run

@Foltz03 4 жыл бұрын

This is badass. I can't wait to get to my shop and get this project done!

@carlosr.garcia9996 3 жыл бұрын

Great Idea and well executed! Thanks for sharing your idea and how to.... trail safe!

@ButterbeanOutdoors 9 ай бұрын

I love it! Thanks again man! great stuff!!

@matthewbrown5334 3 жыл бұрын

That's a great build! And way to go with the double-sided gorilla tape. And the magnet light. Man, some great solutions here.

@soundman460 5 жыл бұрын

Just built mine. Thanks for the video. It was great to follow.

@zzzz-ok7733 Жыл бұрын

Finally some one who stained there wood! Excellent 👍.

@celebratewhoyouaretoday3513 5 жыл бұрын

So awesome! I am definitely trying this!

@JosePerez-ej7su 3 жыл бұрын

Badass idea... I'm gonna try this ... thank you.

@spikes1092 5 жыл бұрын

nice choice on the stain, matches the green paint nice

@v8zj98 5 жыл бұрын

love the fayetchille sticker. nice to see a fellow Arkansan on here!

@josren 5 жыл бұрын

Keep uploading love it!!

@mikateka 3 жыл бұрын

Great idea and video!

@RyanBennett_Gpd605 5 жыл бұрын

Fantastic Tailgate table! You have me sold!

@doinsngoins 3 жыл бұрын

Love it ! Great Idea thank you , Im going to do this on my boat

@charlybrown6884 4 жыл бұрын

Thank you buddy, you inspired me to make my own tail gate table 😁👍🏼

@johnnorthrop5218 5 жыл бұрын

So glad your channel popped up. Totally love your keep and being in Ft Smith the Fayettechill decal caught my eye immediately! Building my 2 door 2010 JK towards overlanding... but with a backpackers history and budget. Lol. Love this table idea- thank you.

@ArkansasOffroad 5 жыл бұрын

So awesome man! Maybe I'll see you someday. Appreciate the support!

@nickalexis4916 5 жыл бұрын

Great video!! Thanks for sharing!

@pbjadventures954 5 жыл бұрын

Awesome! Now I’m off to make mine for my JL! Only trouble is the tailgate is a little less flat... it’ll take some tinkering but I’m looking forward for the challenge!

@henrycolestage4249 4 жыл бұрын

Well done! I wondered what the light switch was. Now I'm going to have to go buy a couple ;-)

@captainluke90 5 жыл бұрын

after watching this video I made one of my own very similar to this. Thanks for posting

@marcusalancate1782 3 жыл бұрын

Very creative. Thanks.

@rupertbradley5021 5 жыл бұрын

Nice, I’ll be making one now!

@HeartlandMakesAndOutdoors 5 жыл бұрын

Good job on this video my friend, I have been tossing buying one of the tables like you mentioned in the comments, but making my own would be funner, so thanks for sharing this idea, I love it. dale

@paragonmc 3 жыл бұрын

Very creative solution 👍🏻

@davidvanhorn6887 5 жыл бұрын

Nice mod and great video!

@OregonMike 5 жыл бұрын

Very nice, simple easy effective

@ReplayFan562 5 жыл бұрын

very cool! thank you for sharing!

@jenixavillasana2368 5 жыл бұрын

Thanks for the great video!

@heathermiller78 5 жыл бұрын

Had this idea for our tj but wasnt sure how it would turn out. After watching your video ....ours is done...and we just use it in the drive way if we want to grill .....works great. Thanks for posting yours.

@ArkansasOffroad 5 жыл бұрын

Awesome!

@bassbomb3 5 жыл бұрын

Made the table with a few changes (so it could fit my yj) and so far i love it! Thanks man

@ArkansasOffroad 5 жыл бұрын

Right on man! So stoked I could inspire you.

@jcs5202 4 жыл бұрын

HAHA! Very cool. No need to spend hundreds, and you proved it! Excellent job! Love the light switch....and actual, eff**ng light switch! you DA MAN!

@eddaeges9309 4 жыл бұрын

Thanks for the video. Been looking at the other table But as you know the prices are insane. Thanks again.

@larrygoodsell9273 5 жыл бұрын

My 21 year old son and I both have YJs, I've been going to add the tables but I was stuck on the latch. The magnet if so simple it's stupid I haven't thought of that too, thank you. Also my son loved the place for the stickers.

@donzimmer4616 5 жыл бұрын

Nice work!

@ricardobravo1213 3 жыл бұрын

Just wanted to say thanks for sharing your great design. Watched your video about a year ago and ended up making one for my Jeep, it works great.

@ArkansasOffroad 3 жыл бұрын

Hey I appreciate that! That's awesome.

@evazkee7246 5 жыл бұрын

Doing the same thing but flex sealing it. Great job.

@ToddKirst 5 жыл бұрын

Brilliant!!!

@_ROADRANGER 5 жыл бұрын

Thanks you saved me a ton of money

@thespearodiver 5 жыл бұрын

Great video bro... Been planning a cheaper alternative for my YJ. Thanks for sharing!

@AdventureDarin 5 жыл бұрын

Thanks man! I'm gonna make one

@marsoelflaco5722 3 жыл бұрын

Very clever.✌🏽

@guritche 5 жыл бұрын

Nice video. Thanks!

@doambergames 2 жыл бұрын

Nice video👍🏻

@joerockme7485 4 жыл бұрын

Another cool tip👍🇺🇸

@salmendez280 5 жыл бұрын

good job man.

@billveder1071 4 жыл бұрын

Great job! I can't believe you sold it.

@tdg0101 5 жыл бұрын

Good job. Thanks

@crazynotme7606 5 жыл бұрын

👍 Great Idea 💡

@etomlinson11 4 жыл бұрын

Awesome idea! Will be doing the same for my jk. Question for ya, did you think about using strong long magnets and connect it to the piano strip, instead of the double sided tape?

@selisahue1268 2 жыл бұрын

Thanks!

@craighastie5668 4 жыл бұрын

Great video. Keep up the good work. Would love to wheel sometime when I get back that way. My parents and brother live in Rogers and Springdale. Is that tape still holding up? I have an LJ and looking to do the same.

@iconiccrawler4555 5 жыл бұрын

I saw you today! Jeep is even more badass in person!🤙🏼😜

@ArkansasOffroad 5 жыл бұрын

Thanks bro! Were'd you see me?

@iconiccrawler4555 5 жыл бұрын

I believe I was near Rodgers

@jacmens 5 жыл бұрын

good solution thnx

@robshomeandautofixes6926 3 жыл бұрын

Great home made fix seems to work just a good as aluminum tables for 200 bucks!

@MagVair 3 жыл бұрын

For lighting, you should check out the LED light bar that goes on the inside of the lift hatch. I love it! You could use any 12V led light strip?

@ArkansasOffroad 3 жыл бұрын

That would be cool!

@Rickugg 2 жыл бұрын

Hello: Now I know where to use the Earth Magnets I got out of a hard drive. I already thought I would Glue 2 Dollar Tree cutting Boards on top of mine. Yes a Dollar Each. I wish I had a Heated Garage, it 's cold outside. You probably should have used a Cutting Table oil on top of wood. I guess wood glue will bond cutting Boards to 1/4 plywood. How much can you loose. Small Brass wood screws would work. Sink the heads, if screw comes through wood grind it off. Got a Harbor Fright Side Grinder $20.00, works like a $90.00 Dewalt. I''l take Dewalt battery drill any day. Used one 8 hours a day at work, dropped it on Concrete floor put battery back in and go to work. I think I''ll paint bottom of mine black. All those $200.00 tables are Black. Rock On Dude !!!

@ArkansasOffroad 2 жыл бұрын

Awesome!! Thanks!

@ujayet 4 жыл бұрын

That is really cool man,, what kinda tire carrier is that? Does it require drilling?

@jkxtc2016 5 жыл бұрын

What year and model is your jeep ?? Nice job on the table ...good ideas am getting ready to do one myself.

@fastfoodvwFL 4 жыл бұрын

The tape idea for the hinge is great but would never work here in Florida during the summer. The damn heat would have that lose with a quickness. Any loss of tension with the paracord?

@AntonioTrujillobonsai 3 жыл бұрын

Thanks bro! This is just nice. I'll go right away to the home deepot store and make it.

@haloben17son37 4 жыл бұрын

Hey. I’m deaf. Can anyone tell me what the list of things I need in this video wish I could Hear what he was saying and what things he used. Thanks

@kevinwpatterson 3 жыл бұрын

Cut your captions on. I know they are janky at times. I work in a very loud environment and have breaks I will watch videos and the only way I can is captions.

@rustybottoms8859 4 жыл бұрын

What brand spare tire carrier do you have?

@panthercat187 2 жыл бұрын

Where did you get your above tire storage rack/shelf? Can’t find it. Thanks for the video, better solution than anything on the market

@ArkansasOffroad 2 жыл бұрын

I have a separate video on it!

@paradox8038 3 жыл бұрын

Do you think a 65lb magnet would be too strong?

@jennifersanchez1500 3 жыл бұрын

queen bohemian rhapsody

@ericzeigler8669 4 жыл бұрын

This is a fair attempt at a long term table, but a great attempt at a short term table. As soon as the Gorilla tape gets really cold, it will separate from the door or piano hinge. I see one of the bolt heads sheared off when you unbolted the plastic cover to mark your table cutouts. You could get that out with a drill/extractor bit set made by Craftsman (don't use Harbor Freight ones). For less than $30 I would have to give you an "A" for this mod. If you replaced the Gorilla tape with 4 rivet nuts evenly spaced, that would be one strong table that won't fall apart in winter. Great video!

@ArkansasOffroad 4 жыл бұрын

I appreciate the tips!! I will say that I have gone through a full winter and camped several times and the gorilla tap hasn't detached once! Must be some strong stuff!

@jesusescobar1350 3 жыл бұрын

Where did you get the magnet at ??

@MagVair 3 жыл бұрын

Go ahead and pop rivet that to your tail gate!? You know your want keep it!? 😁👍 Wish I had seen this before I bought mine....🙄

@warrenpomphrey4477 4 жыл бұрын

Like your table,how are you handling the third brake light switch?

@ArkansasOffroad 4 жыл бұрын

Thank you! I don't have a third brake light.

@bkl8804 3 жыл бұрын

So the stain is non-toxic? What stain? This is my next mod. Working on it now. Designing mine to mount via piano hinges to my orangeboxx molle rack.

@ArkansasOffroad 3 жыл бұрын

Awesome! I'm not sure on the stain.

@mericanfreedom8347 3 жыл бұрын

Hey man! I have the same tire carrier, did you make or buy your rear tire basket? I can’t find one for it anywhere🤷🏻‍♂️

@ArkansasOffroad 3 жыл бұрын

Right here my man kzfaq.info/get/bejne/hd93f652kpzOdoE.html&ab_channel=ArkansasOffroad

@mericanfreedom8347 3 жыл бұрын

@@ArkansasOffroad thanks bro!

@capitaldd5840 5 жыл бұрын

Funny question, is the gorilla tape, stuck to the top of the wood(and tailgate). Then the piano hinge on top....? I couldn't really tell.... The fold up table is a Great idea...

@ArkansasOffroad 5 жыл бұрын

It's stuck on one side of the piano hinge and onto the tailgate. Not touching the wood. The hinge is screwed into the wood.

@lukeslatest5320 5 жыл бұрын

Where do you get the magnet? Lowe’s and Home Depot didn’t have them.

@ArkansasOffroad 5 жыл бұрын

Got mine at Lowes. They had several.

@jkxtc2016 5 жыл бұрын

What type and size screws did you use to mount it with the piano hinge

@ArkansasOffroad 5 жыл бұрын

Not sure. They came with the piano hinge.

@garretpigford8116 5 жыл бұрын

Wow man just wow. You just a lot of people a lot of money. Idk why I didn’t think of this. People that read this. Please link me diy beds shelves things of that sort.