DIY powerful electric scooter from hoverboard
Рет қаралды 179,178
Күн бұрынHomemade XXL 2WD electric scooter with dual hoverboard motors * build * testdrive *
I built a DIY homemade fat tyre electric scooter with dual hoverboard motors front and rear. Tubing is a combination of 35mm, 20mm and 16mm, 2mm wall thickness.
Unfortunately I did not film the build process but I included some build pictures.
It is foldable and has led lights and underglow.
Wheels are from an 110cc atv.
Compared with a regular scooter it is really massive.
Specifications:
hooverboard motor front and rear: 36v 350w
dual brushless motor controllers 48v 350w (aliexpress)
4 hoverboard batteries: 4x 36v 4400mAh
top speed (driver 65kg): 38 km/h on GPS
autonomy: 17 km
weight incl batteries: 35,2 kg
chapters:
0:00 - build process pics
1:24 - presentation of the finished scooter
3:35 - testdrive
I am currently building another scooter with 4 hoverboard motors.
This time I will film the whole process so subscribe if you don't want to miss it.
update 01/09/2021: check out my new build here:
• How to build a DIY til...
check out my first scooter here:
• Homemade powerful 2WD ...
Leave your questions in the comments I will be happy to answer them.
Thanks for watching
@hennybutabi 2 жыл бұрын
I am currently building another scooter with 4 motors! This time I am filming the whole process. Subscribe if you don't want to miss it👍
@amigo_official8333 2 жыл бұрын
would love the drawings of the frame work ! It's really nice.
@hennybutabi 2 жыл бұрын
@@amigo_official8333 sorry I don't have plans. I just had the idea in my head and build as I go.
@amigo_official8333 2 жыл бұрын
@@hennybutabi okay too bad. I would really love if you had the time to make a basic tutorial on how to connect a hubmotor to a motor controller. I'm a newbie but I am really interested in learning this stuff, it's so cool. Just can't seem to find any tutorials on here. As I understand, i need the following to make an electric scooter run. Battery,motor controller, hubmotor and a throttle. Do I miss something. And if you don't have the time to make a video, can you recommend a website where I can learn ? Where did you learn ? :) THank you.
@hennybutabi 2 жыл бұрын
Hello. In short you will need 1 controller per motor. There are plenty of videos on youtube on how to wire them, its not that hard. Check out tchangly21 channel, plenty of info there, however all is in french. I learned through google and youtube :)
@pandlys2541 2 жыл бұрын
Ascertain azure
@neogator26 2 жыл бұрын
This is fantastic! I won't have the time to build my own frame but would def like to try to repurpose a scooter and add some hoverboard motors. Hoverboards die all the time and people sell them for dirt cheap here in the states.
@indigobr5590 2 жыл бұрын
Esse cara é ou não é um gênio?? Os trabalhos dele é melhor que o de muitos engenheiros formados por aí... Parabéns
@Ryan-mt4xx 2 жыл бұрын
Excellent job.Beautiful and powerful.
@kevinsellsit5584 2 жыл бұрын
Bravo! I'll take a strong rigid frame over suspension any day!
@barrybabbot7481 2 жыл бұрын
Razor E300
@stevenboelke6661 2 жыл бұрын
Very cool. Seems overbuilt, but there's nothing wrong with that of course. I'm looking at making something like this that's sort of a feet-forward motorcycle: Long wheelbase, seat, lots of power, suspension, fairings, etc.
@shaneellasdaicastrestorati3675 2 жыл бұрын
I'd love to see a video on how you modify the hub motors to fit different wheels .
@electric_rider2044 2 жыл бұрын
Wow! Very cool! The frame design is very nice
@golddiggernz 2 жыл бұрын
Nice job, great vid, like the design 👍 I made one as well not quite as nice as yours but next one I might have to put a little more effort into to match yours, was thinking of using 4 motors as well 😁
@mrnobody2589 Жыл бұрын
Wow another great build 👍.. If I had your engineering knowledge I would love to see a love child between my Goped petrol scooter from the early 2000s and my Kaabo wolf king.
@BottleBri 5 ай бұрын
What an incredible looking scooter. Brilliant build! You are talented. 👍🇬🇧
@aguiloco23 Жыл бұрын
That's an overkill chassis, very nice work!
@gersoncorrea2579 Жыл бұрын
Simplesmente magnífico !!! Quais medidas destes pneus ? Parabéns pelo projeto um dos mais bonitos que já vi 👏👏👏👏 Saudações amigo
@keeganbuilds 2 жыл бұрын
Any details on how you got hoverboard motors to work in those big tires??
@OcotilloTom 2 жыл бұрын
Put a removable support with a nice seat and you will have something. This may appeal to a lot of folks who can't stand up all the time and are looking for a quality scooter.
@brianmck7363 2 жыл бұрын
With those massive wheels you really don’t need shocks!! How many miles of range are you getting?? Great video and great design I’m going to subscribe to watch your next build!! Maybe larger motors on the next one!!!
@hennybutabi 2 жыл бұрын
I am getting 17km range which is about 10 miles. Next project will have 4 motors and bigger batteries. Thanks for subscribing :)
@Austin-wf9gq 2 жыл бұрын
That is a BEAST 👍🏽👍🏽
@robertfries8645 Жыл бұрын
Best scooter I own
@fumetsu-950 Ай бұрын
very cool but needs suspensions
@selfie183 Жыл бұрын
wow that system is hevy ♥️and so wel wurth the price
@tomaswolsink7620 2 жыл бұрын
That is well build damn!
@hennybutabi 2 жыл бұрын
thanks man!
@markcozzie 15 күн бұрын
Top speed looks slow?,20mph?
@yudhisastra3835 2 жыл бұрын
Bagus banget scoternya,, saya dari Indonesia nusa Tenggara barat , mataram,, kasih sumbangan buat kita dong, ada buat pergi kerja
@rus.izmaile 2 жыл бұрын
Nice
@jerrymurphy4608 2 жыл бұрын
Great
@arjodasgupta2151 2 жыл бұрын
Amazing build. I was wondering how did you use 48v controllers with 36 volt motors. Shouldn't it be the same? Would it be as fast if I use 36v controllers with the hoverboard motors.
@hennybutabi 2 жыл бұрын
I use 48v controllers to be able to upgrade to 48v battery later. Putting 36v battery on an 48v controller works fine! And yes, I think so.
@Pazair-nq6gl 2 жыл бұрын
Me encanta sr 🤙
@roodick85 2 жыл бұрын
So badass!
@dipeshlimbu6677 2 жыл бұрын
Looking amazing zing zing
@stephanesteph6521 2 жыл бұрын
Great job!! nice frame design!!! Can i have dimensions?
@cybertech931 2 жыл бұрын
comment a tu fais pour monter la roue sur le chassis avec un moteur de hooverboard si tu avais juste un moteur a un axe d'un seul coter a tu souder une tige sur le moteur ou je sais pas ??
@davegatchalian3335 2 жыл бұрын
how did you mount those big tires on hoverboard hub? Thank you!
@toxiclaboratories7070 2 жыл бұрын
What did you use to control the motors
@pkf4124 2 жыл бұрын
Looks good, could be retail
@hugofrias4430 2 жыл бұрын
muy lindo patinete , pero un mamarracho de soldaduras , es una pena ya que tiene buen diceño y hermoso color , pero por fabor hace un curso de soldadura ok , felicitaciones por ese scuter
@karolbuda 2 жыл бұрын
nice!! do you have any pic or movie how you mount motors in these wheels?
@hennybutabi 2 жыл бұрын
No sorry. But its not that difficult: open up the motor and bolt the outer housing to the wheel. I am currently building the next project and this time I am filming everything. So stay tuned ;)
@AmazinAsian88 2 жыл бұрын
I understand that the hoverboard motor is mounted to the whee face. But how are you attaching the axle to the wheel on the opposite side. These are great builds btw.
@hennybutabi 2 жыл бұрын
I drill a hole in the center of the outer shell of the motor. Then I weld a threaded rod to the motor shaft. The shell goes over this shaft through the wheel and attaches to the opposite side of the fork. Thanks for watching👍
@kevinreeves3161 2 жыл бұрын
All you need is two motors put them in the wheel
@christophercobb4317 2 жыл бұрын
Nice job what size are the tires
@GoodwinsPlace 2 жыл бұрын
Nice build. Will you be going through the build process on the next one? Would be interesting to see.
@hennybutabi 2 жыл бұрын
Yes, i am currently building another one and i am filming the whole process. I hope to post the video in a few weeks!
@thangmexe5130 2 жыл бұрын
very nice car
@selfie183 Жыл бұрын
feles fre like the wind amd no hesitationing
@AlpeshLp 2 жыл бұрын
can you please share the complete details video?
@pavletrnic1433 3 ай бұрын
Great project! I’m looking into using those motor controllers for a go-kart project, i’m wondering what the top speed is and how good the torque is at starting speed. Thanks
@hennybutabi 3 ай бұрын
I think this setup is too weak for a gokart. Topspeed is around 35km/h. Torque at starting speed is ok for a scooter is a heavy gokart I think it will be dissapointing
@pavletrnic1433 3 ай бұрын
@@hennybutabi i will use two motors per wheel in the back and two more motors in the front, which is 6 motors in total and enough power for me. I already managed to put two motors together inside a go kart tire for a diy onewheel project. Do you know if these controllers support field weakening or if i should try to use the original hoverboard controller with a custom firmware?
@hennybutabi 3 ай бұрын
@@pavletrnic1433 don't have any info on the field weakening but since they are just simple cheap controllers I suppose they don't have it.
@pavletrnic1433 3 ай бұрын
@@hennybutabi thank you, i’ll look into findong firmware for the hoverboard controller.
@7yudhis 2 жыл бұрын
Would you mind to share detail of size, electric schematic and so on? Thanks a lot
@hennybutabi 2 жыл бұрын
I don't have any of that, I build as I go sorry. There are a lot of vids on youtube on how to wire those motors. Good luck!
2 жыл бұрын
top 👌
@creativechannelsamodelkin161 2 жыл бұрын
Если б ещё швы по зачищал то вообще супер было!
@user-cm1lb3fr4g 2 жыл бұрын
Говно не чистят.
@pvanb291 2 жыл бұрын
Great job! What's it's weight? Pretty hefty with all that steel tube I imagine. Would be nice if in the next video, you confirm your creative brain IS worth protecting by putting a full face helmet on!!
@hennybutabi 2 жыл бұрын
It weighs around 32 kg, all the technical details are in the video description. I will keep the helmet remark in mind😏
@tommywilliamsjr.8496 3 ай бұрын
I've been building my own scooter like yours. I got a 1000 watt brushless motor on it. But man all the welding I've done it is heavy. Not sure if you'll respond or not but how much does yours weigh? Mines not done yet but almost...but it's already 53 lbs . Is yours heavy like that too?
@hennybutabi 2 ай бұрын
Mine is around 35kg which is 77lbs. But I'm not a heavy guy so it does not matter so much. And based on my experience with my other builds, a scooter drives better when it's heavier. Good luck with yours. Check out the other electric scooters I built on my channel.
@darylromjeparilla4806 2 жыл бұрын
- can you upgrade specs and make it sporty looks anyways big thumbs up keep it up sirr
@cybertech931 2 жыл бұрын
how did you go about mounting the wheel on the chasis with a hooverboard motor if you just had a single-sided motor Did you weld a rod on the motor or I don't know ??
@hennybutabi 2 жыл бұрын
Yes I drilled a hole in the outer shell. Then I drilled a hole in the shaft an tapped it and screwed some threaded rod into it. The outer shell of the motor is bolted to the wheel.
@cybertech931 2 жыл бұрын
@@hennybutabi thank you for Your speed Return message
@cybertech931 Жыл бұрын
Hey good work but hi have a question you have build a voltage converter for passing 36v hoverboard battery in 48v or you have drop 72v in 48v can you light me pls
@shanedog9082 2 жыл бұрын
That’s nice work, how many lbs is that?
@germanninapaytan957 2 жыл бұрын
La muerte😲😲👍
@josem5287 2 жыл бұрын
How many mph does it reach?
@jeroenjager 2 жыл бұрын
Great!
@ABCustoms 2 жыл бұрын
Jij bent Nederlands zeker? Vet ding zo! Zijn die hooverboard motoren zo sterk dan?
@hennybutabi 2 жыл бұрын
Belgie😏. En ja voor deze toepassing meer dan genoeg. Ik ben trouwens al een tijd subscribed op uw kanaal, doe zo voort👍👍
@ABCustoms 2 жыл бұрын
@@hennybutabi aah dat hoor ik graag! Maakt het nog uit welk type hooverboard? Vind dit wel een leuk ding om er mijn variant van te maken! Doe anders ff dm op instagram!
@meboy3513 Жыл бұрын
Top speed??? 🤔
@charodey69 2 жыл бұрын
И снова супер! )))))
@jayshaw3971 2 жыл бұрын
好嘢.!!😍
@SheniSwat 2 жыл бұрын
I like the concept...so how do you get the batteries charged when they die?
@hennybutabi 2 жыл бұрын
I take them out and charge them indoors
@user-pc9rg9rs9u 3 ай бұрын
Wow!
@user-np7vl8pu3m 2 жыл бұрын
Good day. The question is, how much does this unit weigh and what is the total power of the motor wheel? Thanks.
@hennybutabi 2 жыл бұрын
Check the video description, all info is there😏
@jemi1829 2 жыл бұрын
No suspension??
@goodmorningtraders7815 2 жыл бұрын
WOW⚡⚡⚡⚡👌👌👌👌👌👌👏👏👏👏👏👏⭐⭐⭐⭐⭐
@Litespd750 2 жыл бұрын
I like the frame design. How much $$ do you have in it so far?
@hennybutabi 2 жыл бұрын
Not so much, I think around 200 euros. Atv and hoverboard were second hand and broken. Most expensive was the paint :)
@Litespd750 2 жыл бұрын
@@hennybutabi Haha, that's awesome! You are getting way more range and top speed than the hoverboard ever got!
@artwithdad5131 2 жыл бұрын
This great product could be a lot better if mud-guards, as well as turn indicators, are attached. That's all I'm thinking, please don't take it too seriously.
@lemontea2065 2 жыл бұрын
Why do you pick such big tires for such small motors?
@mariavictoriaaranzamendezm5485 2 жыл бұрын
hi sir we are interested to know how you make your DIY, where you from, nationality? thanks po
@alexeialekseev 2 жыл бұрын
Nice scooter. What about climbing to the hill on it?
@hennybutabi 2 жыл бұрын
If not to steep, it does not have any problems
@mjangelo4814 2 жыл бұрын
Great Build!! Ive really been thinking about building my own scooter. I want to build something fast that i can race. what do you suggest for getting something built that can go over 100 MPH .I NEED SPPED!
@dynmc 2 жыл бұрын
There are really many ways a man can die. Are you sure you want to kill yourself by riding a scooter? Going 100mph/160kmh while being on a wheelbase length of only 1 meter and being driven by such small diameter wheels (i must also mention the high center of mass) is a fatal accident waiting to happen!
@mohamedhesham9849 2 жыл бұрын
100 mph ? On a scooter 🤣🤣🤣
@dynmc 2 жыл бұрын
@@mohamedhesham9849 it's possible if you know what you are doing. you're goiong to die for sure, but it's kinda easy to go 100mph with a scooter.currently Kaabo's fastest one goes 70mph
@oturanboga6225 4 ай бұрын
@ProZhektor999 2 жыл бұрын
Please give me a link to the wheels
@fpvcowboy2635 2 жыл бұрын
What speed does it do with dual motor
@hennybutabi 2 жыл бұрын
37km/h
@tomekzgb 2 жыл бұрын
Bad welding!
@marvinmonteroarias9673 2 жыл бұрын
Materials to building please
@Asad-2166 2 жыл бұрын
Why not mass produce this🤔🇬🇧I'd be the first to buy
@starcloud4959 2 жыл бұрын
Do you sell them? They are awesome, how a strong, scooter should look!
@marcoslopez8971 10 ай бұрын
Full vídeo 📹
@lilloambrogiorizzo4945 2 ай бұрын
Si può acquistare?????
@dag511 2 жыл бұрын
Моторы слабые для такого диаметра колёс. Они не смогут затянуть у хорошую горку.
@natolursmanashvili1812 2 жыл бұрын
hello can you send me dimension of scooter? thanks in advance
@user-li4io7ui2c 2 жыл бұрын
Все хорошо,но сварка заставляет меня плакать ребята.
@Robert127 2 жыл бұрын
How much for that big beautiful machine
@ProZhektor999 2 жыл бұрын
what motors did you use?
@hennybutabi 2 жыл бұрын
The motors are from a broken hooverboard, the wheels are from a wrecked ATV. All bought second hand locally.
@rodolfoadrianhernandezlain8606 2 жыл бұрын
brain time soundtrack
@-joo3033 2 жыл бұрын
That frame looks good
@angelofevil4222 2 жыл бұрын
0:02 i dont undestando hot to put a weels
@MrCrofty1993 2 жыл бұрын
How did you get it to go so fast ?
@hennybutabi 2 жыл бұрын
since the diameter of the rim is a lot more than the hoverboard wheel it is faster. Less torque but more speed. I just tested with 48v batteries and top speed increased to 47 km/h. But that is too dangerous :)
@MrCrofty1993 2 жыл бұрын
@@hennybutabi thank you for the reply I never knew that but amazing build you should be very proud I've subscribed hopefully you continue to do these types of builds
@hpx-y202 2 жыл бұрын
Ürünlerin satılık mi peki Ben almak isterim.
@bradtodd7228 2 жыл бұрын
Those welds are horrendous
@iDOLEAST 2 жыл бұрын
Интересный вид. Начинка слабая.
@samantafox4311 2 жыл бұрын
Все отлично, но провода торчат некрасиво! Надо было провода спрятать в трубах!
@bigbrad9976 2 жыл бұрын
What's the top speed?
@hennybutabi 2 жыл бұрын
37 km/h with 36v batteries, 47 km/h with 48v batteries
@tisoypancho5570 2 жыл бұрын
Try 5y6k
@74Rikhard 2 жыл бұрын
А где там паверфул, куча чернухи тяжелой на раме, два вялых гироскуторных мотора на таких же печальных батарейках общей емкостью как у еэски найнбота плюс огромные тапки заряда хватит на км 15 при таком конфиге да еще и крыльев нет все изговнякается
@jasferjasfer7084 2 жыл бұрын
What is the size of tire/wheels?
@hennybutabi 2 жыл бұрын
16 x 8.00 - 7
@AltarastLD 2 жыл бұрын
Эм.....ну да, выглядит хорошо, исполнение супер. А вопрос - на*уя он?) Тяжеленный как мопед, но без сидения. Большие колеса но проходимость плохая, ибо клиренс маленький. Просто непонятно зачем он. Самоделка ради самоделки.
@si_FULAN 2 жыл бұрын
may i know how big the rims are, is it 8 inch or 10 inch? thank you I'm looking forward to the next project
@hennybutabi 2 жыл бұрын
Thanks! The wheels are 8 inch.
@AjcgMe Жыл бұрын
Would you accept a commission to do a vehicle to help with my disability and recovery? I can share the details by email if you want just let me know if you can take private projects. And super congratulations on your scooter it’s awesome 👏🏼🎉❤
@divertechnology 2 жыл бұрын
pather
How to build a DIY tilting electric scooter with fat tyres and 4 hoverboard motors - start to finish
HennyButabi
Рет қаралды 1,5 МЛН
Осторожно: Собчак
Рет қаралды 10 МЛН
Ronaldo coelho Creative
Рет қаралды 481 М.
GTechMx
Рет қаралды 4,7 МЛН
notebook-31
Рет қаралды 130 М.