DIY Powerful K Style Rocket Stove - Forme Industrious

  Рет қаралды 399,876

Scott Turner

Scott Turner

Жыл бұрын

In this video I make a K style Rocket Stove.
On our "Off Grid" property that we hope to move to soon, we have a lot of timber and twigs that are great for camp fires and cooking etc. I figured I should make a rocket stove and save money on natural gas.
Why a Rocket stove?
Rocket Stoves are quite efficient in burning small branches and twigs to produce a very hot directional fire directly beneath your frying pan/ pot etc. They use very little wood (fuel) to cook a meal and produce very little smoke once it is heated. They are a great portable option for camping.
This stove is quite large and puts out a lot of heat. Trick is to start a small fire in the combustion chamber, which heats the whole stove up and creates that rocket effect, sucks air in and it speeds up the combustion shooting flames out the top. Adding sticks as it heats up. (I love it :)
To make this Rocket Stove check the video for the dimensions I used. The main body is made from 100 x 100 x 4mm Tube. Legs from 65 x 35 x 4mm box. All Mild steel painted with heat paint.
Thanks for watching
Regards
Scott
I Work with Tools Shirts;
www.iworkwithtools.com
Only in Australia
Discount Code FORME
Instagram
iworkwithtools

Пікірлер: 276
@judyturner8700
@judyturner8700 Жыл бұрын
This was a good alternative to the open fire as it was a bit too windy that evening. Spuds were delicious.
@ScottTurnerformeindustrious
@ScottTurnerformeindustrious Жыл бұрын
:)
@tree_carcass_mangler
@tree_carcass_mangler Жыл бұрын
I never thought about that - thanks for the advice!
@plainnpretty
@plainnpretty Жыл бұрын
You don’t get the enjoyment of a open fire but a better use of your fuel supply and if your not asleep after eating all that yummy food you can still build a fire for entertainment
@user-db9iy2tp3i
@user-db9iy2tp3i 5 ай бұрын
I work with Tools in Maryland, USA. I watched 5 men make these stoves, and 3 of them did more dangerous/stupid things than i did as an apprentice. It was good to see a Real Craftsmen "Git-R-Done"! - Nice build!
@ScottTurnerformeindustrious
@ScottTurnerformeindustrious 5 ай бұрын
Huge thank you!
@johnathonsandler9507
@johnathonsandler9507 2 ай бұрын
And I bet they are all still alive. Sometimes to be creative you gotta do things differently than the norm. Great inventions were made not following what u were taught but by branching out.
@bibek3793
@bibek3793 2 ай бұрын
Can you advise me about where can I buy this stoves please…..
@davidsnyder2000
@davidsnyder2000 Жыл бұрын
I know everyone wants to thank Scott, but behind every good man is an even greater woman. Thankx Judy for these nice videos too❤️🙏😊👍
@ScottTurnerformeindustrious
@ScottTurnerformeindustrious Жыл бұрын
Truth
@danielhanawalt4998
@danielhanawalt4998 16 күн бұрын
Simple but effective stove. Not too complicated. I like the angled feed tube. That wouldn't be too hard to build even without the big tools, just a hand held grinder and a welder. If you didn't have a welder you could find someone who does and pay a bit for them to do the welding. Good video, nicely explained and demonstrated.
@ScottTurnerformeindustrious
@ScottTurnerformeindustrious 15 күн бұрын
Much appreciated Daniel!
@kerouacf0069
@kerouacf0069 Жыл бұрын
Great little project, cant beat the old spuds done outdoors. stay safe .
@ScottTurnerformeindustrious
@ScottTurnerformeindustrious Жыл бұрын
Cheers! Yep the spuds were great.
@bg73
@bg73 Жыл бұрын
I enjoy watching your metal work, so clean and precise, and your welding is mint...
@isaactalley2819
@isaactalley2819 Жыл бұрын
I love that I’ve been watching your channel long enough to see your welding improve so much!!! It’s really neat to see and I love your work!!
@dansxmods
@dansxmods Жыл бұрын
Awesome mate, sometimes I feel like I am one of the tools people work with 😜
@ScottTurnerformeindustrious
@ScottTurnerformeindustrious Жыл бұрын
Haha - me too I guess :)
@dansxmods
@dansxmods Жыл бұрын
Got myself one of those shirts to wear when in virtual meetings 😜
@ScottTurnerformeindustrious
@ScottTurnerformeindustrious Жыл бұрын
It's better better than I work with Knobs I suppose :)
@65cj55
@65cj55 Жыл бұрын
Thanks Scott & Judy, i might build me self one.
@ScottTurnerformeindustrious
@ScottTurnerformeindustrious Жыл бұрын
Great to hear! They are not hard and I reckon they work pretty great. Cheers!
@DowneastThunderCreations
@DowneastThunderCreations Жыл бұрын
Simple and straightforward. Excellent build video. Thanks, Scott! 👍👍👍
@ScottTurnerformeindustrious
@ScottTurnerformeindustrious Жыл бұрын
Much appreciated!
@somdaphone7651
@somdaphone7651 8 ай бұрын
@tomim7187
@tomim7187 Жыл бұрын
The cool things people come up with! Such a cool simple design. Seen this around but, never watched a build vid before. Nicely done! Good on ya.
@MCsCreations
@MCsCreations Жыл бұрын
Fantastic work, Scott! 😃 Something like that would've been fantastic when my parents were starting to clean the place and build the farm house... So I guess it's going to be really useful for your construction! 😃 Stay safe there with your family! 🖖😊
@ChristopherSalisburySalz
@ChristopherSalisburySalz Жыл бұрын
I always love your welding videos! Its fun to watch your process. I usually end up picking up some fabrication tips from them too.
@FixitFingers
@FixitFingers Жыл бұрын
Cool and practical new toy, and ideal for the new place. Great stuff Scotty.
@austin2842
@austin2842 Ай бұрын
When I worked as a welder, the machinists used to tell us off for using the bandsaw for hollow tubing because it always mangled up the teeth on the blade. I noticed it drifting on that angled cut, and it brought back memories.
@ScottTurnerformeindustrious
@ScottTurnerformeindustrious Ай бұрын
There are those in every trade that like to assert their incredible knowledge on others ;) It's all about teeth per inch (TPI) and surface contact, and speed. You get that right and it's perfectly acceptable to use a band saw. The saw you used may have been set up for cutting heavy material. Yes my saw may drift. Sometimes it needs resetting and sometimes I'm too lazy.
@austin2842
@austin2842 Ай бұрын
@@ScottTurnerformeindustrious All good, Scott. I was just remembering my own mistakes and getting banished from the bandsaw by grumpy machinists. They had that tool set up for cutting solid shaft.
@JoseMartinez-og2hy
@JoseMartinez-og2hy Жыл бұрын
Bloody marvellous mate! A convenient, all-year barbie, can’t be bad.👍
@brunomckay1875
@brunomckay1875 Жыл бұрын
I remember in the early days of my engineering apprenticeship when I was welding a structure, the foreman who was about 60 years old, wandered over and said, "Hows it looking, is it square?" I looked at him and said, "Looks pretty close to me." He went off his head, saying pretty close, this is precision fucken engineering and you says its pretty close, he then asked for my square, eyed it up and said, yea thats pretty close alright and walked away. It was OK for the foreman to say it was pretty close, not the boy.
@ScottTurnerformeindustrious
@ScottTurnerformeindustrious Жыл бұрын
Haha, damn straight! All the best Bruno
@Perspari
@Perspari Жыл бұрын
Brutal!
@rickeyman2215
@rickeyman2215 Жыл бұрын
I always learn something when I view your videos. Thanks, mate, for sharing!
@EdMeyer22
@EdMeyer22 Жыл бұрын
Once again, another unusual and very cool project - thanks!
@tree_carcass_mangler
@tree_carcass_mangler Жыл бұрын
Great project and video - thanks for posting, and thumbs up!
@dgalisteocabo
@dgalisteocabo Жыл бұрын
Missing so much your videos!!!!
@ScottTurnerformeindustrious
@ScottTurnerformeindustrious Жыл бұрын
I'm sorry for not producing much lately. I'll start editing my next video for upload sometime next week. Thank you so much!
@branchandfoundry560
@branchandfoundry560 Жыл бұрын
A pleasure to watch and informative as always, Scott!
@ScottTurnerformeindustrious
@ScottTurnerformeindustrious Жыл бұрын
Thank you Andrew!
@garagemonkeysan
@garagemonkeysan Жыл бұрын
Great video and build. Nice design and fab on the stove. Looks so robust. Food scenes made my mouth water. : ) Mahalo for sharing! : )
@annie-centrepiecefurniture
@annie-centrepiecefurniture Жыл бұрын
Love the finish that high heat paint gives! Great design 👏👏
@ScottTurnerformeindustrious
@ScottTurnerformeindustrious Жыл бұрын
Thanks Annie!
@Reaps619
@Reaps619 2 ай бұрын
Thanks mate! I work in metal craft and have grown fond of overlanding and outdoors camping and this is perfect! Easy to make and resourceful. EDIT: thanks for the layout template and nice looking welds!
@ScottTurnerformeindustrious
@ScottTurnerformeindustrious 2 ай бұрын
Cheers. They are pretty easy to make and are fun to use. Enjoy!
@ionacjohnj.59
@ionacjohnj.59 Жыл бұрын
Beatiful job! Like you always do. But I guess, the top grill should be better if it is removable. 👍👍👍
@bkdiyprojects6641
@bkdiyprojects6641 Жыл бұрын
Superb as always Your shed was amazing build
@ScottTurnerformeindustrious
@ScottTurnerformeindustrious Жыл бұрын
Huge thank you!
@TY1979KA
@TY1979KA Жыл бұрын
not sure I like your diet but I like the stove :D
@paulinmt2185
@paulinmt2185 Жыл бұрын
Built like a tank! Thanks for sharing the build along with the dimensions. From Montana, cheers mate!
@ScottTurnerformeindustrious
@ScottTurnerformeindustrious Жыл бұрын
Cheers Paul!
@EiderJChavesC2
@EiderJChavesC2 Жыл бұрын
Well done! Thank you for sharing.👍👍👍
@davestinyworkshop
@davestinyworkshop 11 ай бұрын
nice project, one of these would be nice for our garden.
@dougsaunders8109
@dougsaunders8109 Жыл бұрын
Look like good tricky welds to me Scott 👍🏻. I would be happy 😃
@Tee.NZ.07
@Tee.NZ.07 Жыл бұрын
That cold cut saw was a cool addition to the video. Gave a nice cut as opposed to your grinding 😄😝
@ScottTurnerformeindustrious
@ScottTurnerformeindustrious Жыл бұрын
True ;)
@arankthnar
@arankthnar Жыл бұрын
What a cool project! Thanks for sharing! Cheers from France!
@ScottTurnerformeindustrious
@ScottTurnerformeindustrious Жыл бұрын
Thank you!
@oldchev2850
@oldchev2850 Жыл бұрын
Well it’s 11pm and I’ve just watched this and now I’m hungry. Very neat and quality work there Scott. I can imagine it’s hard to get these jobs done when you’re in between both places. Thanks for the video.
@ScottTurnerformeindustrious
@ScottTurnerformeindustrious Жыл бұрын
Thanks Oldchev! Yes I'm getting the miles up going between. I'll have an update video very soon, perhaps this week.
@oldchev2850
@oldchev2850 Жыл бұрын
@@ScottTurnerformeindustrious Excellent, I look forward to that. I understand you'd have so much on with trying to get set up on your block so I appreciate your effort in posting the videos when you can.
@igortornic8277
@igortornic8277 Жыл бұрын
Awesome vídeo Scott!!! Big hug bro!!!!
@royosborn7869
@royosborn7869 Жыл бұрын
Thanks, Scott - another great and useful project
@ScottTurnerformeindustrious
@ScottTurnerformeindustrious Жыл бұрын
Thank you Roy!
@catey62
@catey62 Жыл бұрын
another interesting and cool project as always Scott. look forward to seeing more progress videos on your new property soon too. 🙂
@ScottTurnerformeindustrious
@ScottTurnerformeindustrious Жыл бұрын
Thank you catey62! This week I'll put together a progress video :)
@catey62
@catey62 Жыл бұрын
@@ScottTurnerformeindustrious Will be good to see it when you pop it up 🙂
@krisztiangulyas643
@krisztiangulyas643 9 ай бұрын
Nagyon szuper ötletes munka!
@tymz-r-achangin
@tymz-r-achangin Жыл бұрын
Nice project and nice job. Only thing I would probably change is having adjustable burner plate for raising and lowering it
@robthewaywardwoodworker9956
@robthewaywardwoodworker9956 Жыл бұрын
Great little project. Hope your winter is going well. It's been a hot summer up here in Western Canada. Nice for a change! Rocket stoves give you such a good heat to combustible ratio. Always an excellent choice. Cheers.
@ScottTurnerformeindustrious
@ScottTurnerformeindustrious Жыл бұрын
Thanks Rob. We have enjoyed a cool winter here in the tropics. It's been so nice. All the best.
@elwood212
@elwood212 Жыл бұрын
That rocket stove is a bloody ripper Scott. I look forward to the day I get myself metal working tools. Man that Makita metal compound saw made a huge difference to yr cuts.👍👍🙏
@ScottTurnerformeindustrious
@ScottTurnerformeindustrious Жыл бұрын
Thank you Elwood. Yes the saw is pretty good. It takes a little bit to get used to.
@stoneshrink
@stoneshrink Жыл бұрын
they need to ship to the States.... rocket stoves are cool, love your take on them.
@Blacksmith1967
@Blacksmith1967 2 ай бұрын
Awesome job dude, 👍👍👍👍Thanks for sharing
@ScottTurnerformeindustrious
@ScottTurnerformeindustrious 2 ай бұрын
Thank you!
@mc.builds
@mc.builds Жыл бұрын
I definitely need to try this, great work!
@ScottTurnerformeindustrious
@ScottTurnerformeindustrious Жыл бұрын
Thanks!
@chuxmix65
@chuxmix65 4 ай бұрын
Love the simple deign! Seems like you could scale it up!
@ScottTurnerformeindustrious
@ScottTurnerformeindustrious 4 ай бұрын
Thank you! Yes for sure it can be scaled up or down.
@30gabrielaherrera
@30gabrielaherrera Жыл бұрын
This is a neat little stove! awesome build. For the tight welding corners they make tapered gas nozzles so its easier to get your gun in there. I learned that from Kurtis over at CEE
@towermonkey5563
@towermonkey5563 Жыл бұрын
Or for really tight areas ... stick.
@Alexlivingloud
@Alexlivingloud Жыл бұрын
Good design simple and functional. And still aesthetically pleasing.
@ScottTurnerformeindustrious
@ScottTurnerformeindustrious Жыл бұрын
Thanks Alex!
@tomc8930
@tomc8930 10 ай бұрын
Nice build!…. What I could see looks like you’ve got a nice little shop going. Thanks for post…. FYI I’m from East Texas.
@ScottTurnerformeindustrious
@ScottTurnerformeindustrious 10 ай бұрын
Thank you Tom! I've since moved into my new much bigger workshop, though I'm yet to organise it properly.
@warrenjames1962
@warrenjames1962 Жыл бұрын
Hey Scott. Nice addition to the bush kitchen mate! I reckon life in Wondy is gonna be great for you! I look forward to your projects, they're always educational.
@Schmidyization
@Schmidyization Жыл бұрын
Now I know what all the grinding and cutting was, well done.
@ScottTurnerformeindustrious
@ScottTurnerformeindustrious Жыл бұрын
Thanks Barb :)
@donmelbouchard
@donmelbouchard 7 ай бұрын
Sweet welding! Enjoyed this.
@ScottTurnerformeindustrious
@ScottTurnerformeindustrious 7 ай бұрын
Glad you enjoyed it! Thank you.
@zentiq12
@zentiq12 8 ай бұрын
phenomenal job ❤
@MadeInMyGarage
@MadeInMyGarage Жыл бұрын
Nice job!
@TheMyopath
@TheMyopath 7 ай бұрын
A real welder 👍 Nice and clean!
@ScottTurnerformeindustrious
@ScottTurnerformeindustrious 7 ай бұрын
Thank you!
@stevecrowe176
@stevecrowe176 9 ай бұрын
Excellent vid!! An Aussie vid as well!! Straight forward no shitty music. Thanks for all the dimensions etc!!
@ScottTurnerformeindustrious
@ScottTurnerformeindustrious 9 ай бұрын
Cheers Steve!
@bruced1429
@bruced1429 Жыл бұрын
I have made 3 of these rocket stoves must like yours, I just have different legs on them. I am making a other one now. People seem to like them. Yours are very good, keep up the good work.
@ScottTurnerformeindustrious
@ScottTurnerformeindustrious Жыл бұрын
Thanks Bruce! They are a good simple wood stove, and like you have said, you can build in improvements to make it all work out a bit better.
@wayfarerchris.4116
@wayfarerchris.4116 Жыл бұрын
Great rocket stove built 👍.
@ScottTurnerformeindustrious
@ScottTurnerformeindustrious Жыл бұрын
Thanks Chris!
@DanMadeau
@DanMadeau Жыл бұрын
Luv ya work! Thx for the shirt plug 🤜🤛
@ScottTurnerformeindustrious
@ScottTurnerformeindustrious Жыл бұрын
My pleasure, great shirts!
@arthurrigolot4986
@arthurrigolot4986 Жыл бұрын
Thanks a lot for your vidéo It's will help me lot during my travel in Irland !
@ScottTurnerformeindustrious
@ScottTurnerformeindustrious Жыл бұрын
No worries Arthur!
@derrick_builds
@derrick_builds Жыл бұрын
Nice work. Good little rocket stove.
@ScottTurnerformeindustrious
@ScottTurnerformeindustrious Жыл бұрын
Thank you Derek!
@reynaldoasibo5539
@reynaldoasibo5539 Жыл бұрын
Very good welding buddy
@anatoliestati6466
@anatoliestati6466 Жыл бұрын
Very good
@maccas44
@maccas44 Жыл бұрын
Great stuff
@31pkelly
@31pkelly Жыл бұрын
Another awesome video
@eltallerdeltian
@eltallerdeltian Жыл бұрын
excelente, enhorabuena maestro
@botelloheritage12
@botelloheritage12 Жыл бұрын
Great skills, excellent rocket stove brother.
@ScottTurnerformeindustrious
@ScottTurnerformeindustrious Жыл бұрын
Much appreciated!
@nicgurkweitz389
@nicgurkweitz389 Жыл бұрын
Love it!
@ScottTurnerformeindustrious
@ScottTurnerformeindustrious Жыл бұрын
Thanks Nic!
@robertoreposo9120
@robertoreposo9120 Жыл бұрын
It's a really good thing!
@user-tt3em9ep1h
@user-tt3em9ep1h 3 ай бұрын
Nice Job!
@ScottTurnerformeindustrious
@ScottTurnerformeindustrious 3 ай бұрын
Thank you!
@armandopuebla7107
@armandopuebla7107 11 ай бұрын
Muy bueno y practico
@dannywilsher4165
@dannywilsher4165 Жыл бұрын
Nice stove!!!
@SurenderSingh-lp4cp
@SurenderSingh-lp4cp 2 ай бұрын
impressive
@OneManBandWoodworks
@OneManBandWoodworks Жыл бұрын
Love your work mate
@ScottTurnerformeindustrious
@ScottTurnerformeindustrious Жыл бұрын
Thank you Luis!
@andrewallason4530
@andrewallason4530 Жыл бұрын
Great job Scott. I’ve been making these for a few years now. I make an optional pellet gravity feeder insert version. Took quite a few goes to get the feed just right. I’m toying with the idea of fitting a length of 3” exhaust tube about 2.5m long to a 180’, then back down to about 1.8m, with another 90’ elbow, then it goes out through a panel that fits into a window (only needs to be clipped into the frame), and then a final exhaust flue. It would be as an emergency backup, should we lose power for an extended period. We lost power for 5 days after a storm in May 2019, which was tough, but at least it wasn’t the depths of winter. Cheers from southern Tassie.
@ScottTurnerformeindustrious
@ScottTurnerformeindustrious Жыл бұрын
Thanks for your message Andrew! Yes there are lots of adaptations for the stove and your idea sounds interesting. I used mine again a few nights ago, uses very little fuel to cook up a good feed. Thanks again and all the best.
@riosfamilygarden
@riosfamilygarden Жыл бұрын
This is so awesome. I'm gonna show this to my husband and you gave a new subscriber here. 💪😁Keep up the great work. WOW. Just impressive. I wish I could stuff like this but my hubby and Son do the welding😁😁😁
@ScottTurnerformeindustrious
@ScottTurnerformeindustrious Жыл бұрын
Thank you so much!
@wizrom3046
@wizrom3046 Жыл бұрын
What an awesome little cooker! 👍😎 I would have made the top grille much finer, and removable for cleaning, so I can do flame grilled steaks and burgers directly on the grille. Flame grilled is so much tastier than pan or hotplate fried...
@ScottTurnerformeindustrious
@ScottTurnerformeindustrious Жыл бұрын
Thank you Wiz!
@micmike
@micmike Жыл бұрын
Nice shirt, nice stove and nice property.
@ScottTurnerformeindustrious
@ScottTurnerformeindustrious Жыл бұрын
Cheers Mike!
@Huypumps
@Huypumps 5 ай бұрын
It's a new knowledge.
@donya2787
@donya2787 4 ай бұрын
I love that video very nice 👌
@ScottTurnerformeindustrious
@ScottTurnerformeindustrious 4 ай бұрын
Thank you!
@karenjones3051
@karenjones3051 Жыл бұрын
Nice job, I think I’ll make one too
@ScottTurnerformeindustrious
@ScottTurnerformeindustrious Жыл бұрын
Thank you!
@bruced1429
@bruced1429 Жыл бұрын
I forgot to mention that I put move able gates for air control on the feed tube and the bottom tube, plus I make ash scraper to pull out the ashes or push the wood down more as it burns. Cheers from Canada.
@latelierdejen-paul2561
@latelierdejen-paul2561 Жыл бұрын
Belle vidéo, et projet bien réalisé. 😉👍 ( nice video, well done project)
@ScottTurnerformeindustrious
@ScottTurnerformeindustrious Жыл бұрын
Thank you!!
@jonah9623
@jonah9623 Жыл бұрын
Cool build, woulda maybe made the pan support adjustable height-wise to give you a bit more temperature flexibility beyond the amount of material in the chamber. Nice vid!
@brendenperry3770
@brendenperry3770 Жыл бұрын
I’m building one for a project in school out of 1/4” wall 4x4” square tubing (like 6mm wall and 100x100mm roughly if you use metric measurements) How would you make it adjustable in height?
@iron1974ful
@iron1974ful Жыл бұрын
Muito bom eu também já fiz um desses.
@sergioguerra1246
@sergioguerra1246 Жыл бұрын
Cool!!
@MandeepSingh-sh6uc
@MandeepSingh-sh6uc 4 ай бұрын
Good
@reynaldoasibo5539
@reynaldoasibo5539 Жыл бұрын
Hello buddy new subscriber from Philippines
@ScottTurnerformeindustrious
@ScottTurnerformeindustrious Жыл бұрын
Thanks for subbing!
@miguelpistolas4849
@miguelpistolas4849 Жыл бұрын
Ey man thought u retired no more fabricating too busy on you new project 👍🏽💪🏽
@ScottTurnerformeindustrious
@ScottTurnerformeindustrious Жыл бұрын
I hadn't done any fab for ages. I had to squeeze something in :)
@miguelpistolas4849
@miguelpistolas4849 Жыл бұрын
@@ScottTurnerformeindustrious i know but you allways put you own style ,, keep us alive saludos from texas 💪🏽
@user-qo1gd4yg3m
@user-qo1gd4yg3m Жыл бұрын
A good oven. I made one, but portable with folding legs for traveling by car.
@ScottTurnerformeindustrious
@ScottTurnerformeindustrious Жыл бұрын
They are well suited for that. This one has a bit of weight but is very stable. All the best!
@maseedgull691
@maseedgull691 6 ай бұрын
There should be cage system beneath the feed tube to avoid fall of wood into waste tube
@robertfaizullin4712
@robertfaizullin4712 Жыл бұрын
سلام! ✌excellent work
@maxbrouggy3126
@maxbrouggy3126 Жыл бұрын
Nice, and it you ever need a change of career judging by those legs you have future in bridge building😄
@ScottTurnerformeindustrious
@ScottTurnerformeindustrious Жыл бұрын
I reckon they will hold it up okay :) Nice and stable
@garyjones2582
@garyjones2582 Жыл бұрын
Scott, very nice work.. good to see you making stuff again.. take care my friend.. Have you got your shop moved yet?
@ScottTurnerformeindustrious
@ScottTurnerformeindustrious Жыл бұрын
Hi Gary! Thank you! Haven't moved in full time yet. Plan is to move next year after Chloe is finished School. All the best!
@Bernie5172
@Bernie5172 Жыл бұрын
looks great. but may have to find a kid friendly protection plan ,to stop burns
@ScottTurnerformeindustrious
@ScottTurnerformeindustrious Жыл бұрын
Yes that's true, insulation might do it. Cheers.
@lesorr1312
@lesorr1312 9 ай бұрын
Definitely no shortage working with Tool’s. 🤙
@ScottTurnerformeindustrious
@ScottTurnerformeindustrious 9 ай бұрын
Haha, yes
@13Voodoobilly69
@13Voodoobilly69 7 ай бұрын
Welds looked so nice I think I would not have ground them down!
@ScottTurnerformeindustrious
@ScottTurnerformeindustrious 6 ай бұрын
Thank you! Yes perhaps I should have left the grinder in the rack.
@elwood212
@elwood212 Жыл бұрын
Hey Scott where do you buy yr steel sheet and material from ? I’m close to you, just bought my first welder and want to get cracking on this lovely rocket stove.
@ScottTurnerformeindustrious
@ScottTurnerformeindustrious Жыл бұрын
Hey Elwood. I get my steel from Townsville Steel and Wire. Enjoy the build!
@GibClark
@GibClark Жыл бұрын
Coooooool 👍🏻👍🏻👍🏻👍🏻👍🏻👋
@ScottTurnerformeindustrious
@ScottTurnerformeindustrious Жыл бұрын
Thanks Gib!! All the best.
@jerrymathis
@jerrymathis 10 ай бұрын
I made a k style rocket stove here recently. I noticed my feed tube & air tube are about 5 inch’s longer than yours. Does it make a difference with my air tube being longer? Does it hurt the airflow? Should I cut them off or just drill some holes closer to the front?🤷🏼‍♂️ Thanks in advance, any info is greatly appreciated! Thank you!
@ScottTurnerformeindustrious
@ScottTurnerformeindustrious 10 ай бұрын
I really haven't tested tube lengths sorry. Just thinking it through; if the air intake is longer there is potential to get more airflow obstruction. How well is your stove going, that's the best indication? They take a bit to heat up and get going initially, but once going it should give good heat and draw in that air. Sorry I couldn't be of more help.
@jerrymathis
@jerrymathis 10 ай бұрын
@@ScottTurnerformeindustrious my stove is not to bad , I’ve tried it a few times, it just don’t seem to roar like some stoves I’ve seen on here do. I got a small pot of water to boil in 20 minutes, it was just hard to keep it boiling. Thanks for the info, and quick response! I might tweak it, or I might just keep trying it ,…and it might be good enough. Thanks again!
The Ultimate Rocket Stove | Building a outdoor cooking station
9:14
Hassan Abu-Izmero
Рет қаралды 293 М.
Homemade smart rocket stove
12:06
Creative Project
Рет қаралды 1,1 МЛН
How I prepare to meet the brothers Mbappé.. 🙈 @KylianMbappe
00:17
Celine Dept
Рет қаралды 53 МЛН
Why? 😭 #shorts by Leisi Crazy
00:16
Leisi Crazy
Рет қаралды 47 МЛН
Did you find it?! 🤔✨✍️ #funnyart
00:11
Artistomg
Рет қаралды 122 МЛН
Rocket Stove Science
10:10
Little Aussie Rockets
Рет қаралды 1,6 МЛН
Easy Rocket Stove Build (Welding)
4:50
David Cambridge
Рет қаралды 529 М.
DIY Rocket Stove - Simple Homemade Rocket Stove
3:47
Finding Self Reliance
Рет қаралды 2 МЛН
Отходы В ДОХОДЫ!!! | Из ПРОФИЛЬНОЙ ТРУБЫ!
20:23
Саша Хитрый
Рет қаралды 676 М.
Ammo Can Rocket Stove! - Welding A Portable Camping Stove
31:25
Justin Voss
Рет қаралды 713 М.
Wood Stove Made From A Propane Tank! | Workshop Satisfaction
6:20
Workshop Satisfaction
Рет қаралды 218 М.
Making wall tool holders
6:17
MatthiasWandel
Рет қаралды 6 МЛН
ESTUFA ( ROKET - Cohete )-Como hacerla - Paso a Paso
10:17
Neri herreria tv
Рет қаралды 974 М.
Sigma Girl Education #sigma #viral #comedy
0:16
CRAZY GREAPA
Рет қаралды 75 МЛН
MOM TURNED THE NOODLES PINK😱
0:31
JULI_PROETO
Рет қаралды 9 МЛН
LOOK AT IT . RESPECT? #shorts
0:38
dednahype
Рет қаралды 4,1 МЛН
Ele Comeu a TERRA da Planta😱 #shorts
0:59
Lucan Pevidor
Рет қаралды 14 МЛН
Sigma girl have a good heart #shorts #tiktok #sigmagirl
0:37
mountainlion5
Рет қаралды 13 МЛН
Will new In Sha Allah🤲🏼
0:17
ARGEN
Рет қаралды 11 МЛН