DIY Raspberry Pi Zero Handheld Game Console (Part 1)
Рет қаралды 1,717,278
7 жыл бұрынPrevious video: • DIY Buck/Boost Convert...
Part 2: • DIY Raspberry Pi Zero ...
Facebook: / greatscottlab
Twitter: / greatscottlab
Support me for more videos: www.patreon.com/GreatScott?ty=h
Other Handheld Game Console projects shown in the video:
www.raspberrypi.org/blog/game...
learn.adafruit.com/pigrrl-zer...
Detailed information (pictures, schematics, config files,....) on Instructables: www.instructables.com/id/DIY-R...
Parts list (not complete, see Instructables for more information, affiliate links):
Aliexpress:
1x Raspberry Pi Zero: s.click.aliexpress.com/e/_dWG...
1x NiMH batteries: s.click.aliexpress.com/e/_dTE...
1x 3.5 inch LCD: s.click.aliexpress.com/e/_dYR...
1x PAM8403 Audio Amp: s.click.aliexpress.com/e/_d8A...
1x Housing: s.click.aliexpress.com/e/_dUm...
1x Slide Switch: s.click.aliexpress.com/e/_dZX...
1x 3.5mm Jack: s.click.aliexpress.com/e/_Bfh...
1x Potentiometer Wheel: s.click.aliexpress.com/e/_d63...
1x Speaker: s.click.aliexpress.com/e/_d7h...
3x Tactile Push Button: s.click.aliexpress.com/e/_dYr...
Ebay:
Raspberry Pi Zero: rover.ebay.com/rover/1/711-532...
NiMH batteries (I recommend Eneloop): rover.ebay.com/rover/1/711-532...
3.5 inch LCD: rover.ebay.com/rover/1/711-532...
PAM8403 Audio Amp: rover.ebay.com/rover/1/711-532...
Housing: rover.ebay.com/rover/1/711-532...
Amazon.de:
Raspberry Pi Zero: amzn.to/2eFXSgR
NiMH batteries (I recommend Eneloop): amzn.to/2e9uw7R
3.5 inch LCD: amzn.to/2eG1LCv
PAM8403 Audio Amp: amzn.to/2e9qVXc
Housing: amzn.to/2eFYXF8
In this project I will show you how I used a Raspberry Pi Zero, NiMH batteries, a homemade over-discharge protection circuit, a rearview lcd and an audio amp to create a handheld game console that can play retro games.
Music:
2011 Lookalike by Bartlebeats
Ecstatic Wave, Jens Kiilstofte
machinimasound.com/music
@ElectroBOOM 7 жыл бұрын
I love your projects Great Scott!
@HeRoXLeGenD1 7 жыл бұрын
Both of you guys make the best electric/electronics videos thank you so much !!!
@braulioisaac2609 7 жыл бұрын
i love you videos ElectroBOOM
@RoadGlideTIP216 7 жыл бұрын
man you are fnny as hell
@0Bariq0 7 жыл бұрын
ElectroBOOOOOM
@luigipizzolito5597 7 жыл бұрын
SAME!
@jjcc8379 7 жыл бұрын
"oh, it's just another raspizero handheld" i though before the video. How wrong i was. Createing your own voltage regulator, explaining the process, and showing every step... things like thta are why I subscribe to your channel
@greatscottlab 7 жыл бұрын
Thanks mate ;-)
@premn 7 жыл бұрын
hello can i use a battery module to charge battery? thanks
@TinkerersLab 7 жыл бұрын
bro I liked your videos so much that I clicked on subscribe button twice ;)
@TinkerersLab 7 жыл бұрын
Nooo. Just kidding. You can use that.
@Sam-dc9bg 7 жыл бұрын
I am actually bookmarking this for learning more about your regulator circuit!! Thanks for the video!
@cradledani 7 жыл бұрын
No matter what project you do, you never fail to amaze me. Simply awesome work. Looking forward to part 2!
@Sanchees3 7 жыл бұрын
No way ! I've been having a project like this in my head for a while now but I'm so glad one of my favorite channels now goes in detail about their build. Love your videos, Keep up the fantastic work ! (:
@Saamniferu 4 жыл бұрын
Ok i'm going to make this! Edit: Nevermind.
@morsine 3 жыл бұрын
It'll be way more easier to use a normal tablet battery with a power bank module. Gives out 5v. Charges 3.7-4.7v battery etc
@Saamniferu 3 жыл бұрын
@@morsine Im very late but it was a joke sis...
@philbateman1989 7 жыл бұрын
Not gonna lie, I understood about 2% of that. I really need to study more :(
@mauricioferrazzi 7 жыл бұрын
Yella Dart hes so smart man. I feel the same that you...
@lintangwisesa 7 жыл бұрын
me too :(
@millettec5950 7 жыл бұрын
same all i heard was: volt volt volt volt wifi and more volt
@dylangegax4603 7 жыл бұрын
abid latif take electronics and it'll teach you exactly what to do ^-^
@DtownCboy 7 жыл бұрын
left my face like (O_o)
@veorEL 7 жыл бұрын
I am constantly fascinated by the level of commitment and the in depth knowledge that is built into @GreatScott! 's videos. Amazing every time I watch one. Good work, real German quality.
@OranCollins 7 жыл бұрын
your videos never seem to get repetitive, that's awesome and testement to your quality
@-Sean_ 7 жыл бұрын
That was a lot for a part one. can't wait to see what's next!
@Ululuro 7 жыл бұрын
"4 Eneloops in series gives us 5.6 V" - I undstand that! "Now we just need this max667 that powers this mcp through the non-inverting pin 5 of the opamp with a comperator that activates a flipflop clone that pulls down the gate" - O_O
@0Bariq0 7 жыл бұрын
0-100 REAL QUICK
@artur9502 7 жыл бұрын
just use a li-po battery with a power bank battery charger
@BEdmonson85 7 жыл бұрын
Hey, great video! Glad to see you're doing some more complex projects lately. This video was pure joy for me ☺ Have a great day; I can't wait for part 2! Cheers.
@Joevanhorne 7 жыл бұрын
Dude you are awesome! I've been looking for a while to find out the GPIO layout for the controls and you're the only one who has it. Thank you so much, you may have saved my project.
@hurtadoa1 7 жыл бұрын
I have been wanting to do this for days. I'm so happy you're doing it because now I can follow a better step by step idea. Thanks for doing this. If you ever get your hands on the CHIP computer, tell us you thoughts too. It's like the pi zero but with wifi and Bluetooth for $9
@minebendaoud4754 7 жыл бұрын
what a professional content , i love your channel
@greatscottlab 7 жыл бұрын
Thanks
@curly2457 7 жыл бұрын
do you think you could do that with a raspberry pi 3?
@endersteve704 Ай бұрын
@@curly2457extra late reply but yes
@william_2610 7 жыл бұрын
This is awesome! Looking forward to Part 2!
@devwatts 7 жыл бұрын
Awesome as always! You always come up with something new on your channel👌
@ceeeeeeeeeeeeeeeeee 7 жыл бұрын
Please make more videos like this in the future!
@AntonioBrandao 7 жыл бұрын
Can you please make a version "for dummies"?
@kungfoosquirrel 7 жыл бұрын
Antonio Brandao or sell a kit? Provide a shopping list with schematics?
@sabagamer3052 5 жыл бұрын
@@lcfireskull5750 well fuck you
@DollarbillDollarbill 5 жыл бұрын
You either born with that talent or your not. Kinda like an artist. Don't feel bad. I can't build a picture frame.
@N.Willems 5 жыл бұрын
@@DollarbillDollarbill god... so if u can't do thing the first time u can never learn. kids these days...
@Alvaro-em1dj 4 жыл бұрын
Dollarbill777 Dollarbill777 ur wrong bro,i used to know nun about tech etc and couldnt figure out nothing,nowadays that has changed
@MesonW 7 жыл бұрын
I just sat in awe of your clear understanding of how all that worked lol - I never really did get electronics. Now onto the next video:)
@wkopti 7 жыл бұрын
Congratulations Scott!! Superb video! You are amazing
@schaukelnohneende 7 жыл бұрын
Thank you, I love this way of prototyping. It makes me exited to do the same... :-)
@WarrenGarabrandt 7 жыл бұрын
This is an excellent project! I look forward to seeing part 2. What kind of case do you plan to mount everything into when it's all done?
@egyember4981 7 жыл бұрын
Nice! I love these multi-part project series :)
@Jianju69 6 жыл бұрын
Simply awesome. I learned so much watching this!
@kamran_aghlami 7 жыл бұрын
Very good and informative, keep it up 👍 Here is a thing wouldn't it be better if you just simply used a raspberry pie 3 and desolder LAN, USB ports and audio and gpio ports to make it slimmer? There u would have native lcd,wifi (for whatever reason u might need one, downloading games maybe?),Bluetooth (second controller) and audio support plus more power, and maybe you could use a standalone atmega 168 (or anything else if there's a cheaper adc available) to monitor battery level and send a shutdown command when it's too low (I'm pretty sure your sd card won't t love those sudden power cuts). It wouldn't be as cheap considering Rpi0 vs Rpi3's price alone but it saves you from thst much of circuit design and soldering and it would be a much more expandable project then. PS: comment got longer than I expected, sorry about that, My brain just won't stop spitting out ideas. 😜
@Schn4seL 7 жыл бұрын
We Need Part 2 Scott Please 🤘🏻 And Please give us your Recalbox Image or Configs for reconstruct pleaseeeee
@tannernewton8543 7 жыл бұрын
another great video man, thank you for all your hard work!
@aathish04 7 жыл бұрын
Your handwriting is AMAZING !
@annemccarthy393 7 жыл бұрын
I was writing notes while I watched this.
@paulzaim7900 7 жыл бұрын
5:45 like the iPhone 7:p
@michal7546 7 жыл бұрын
Lost Night Haha, True!
@danielharrop9465 7 жыл бұрын
yep lol
@sanicfanguy 7 жыл бұрын
I don't think I will ever change my phone until Apple stops supporting it.
@paulzaim7900 7 жыл бұрын
Why would you buy another iPhone??? Now they're bullshit.
@kquote03 7 жыл бұрын
but one of them costs 5 dollars and the other costs a kidney .
@BuilderTrevin 2 жыл бұрын
This is something i was looking for Great Scott thank.you! These are still cool apparently!
@DollarbillDollarbill 5 жыл бұрын
Very nice. I would never attempted something that clever. Hats off to you guys.
@eyesofnova 7 жыл бұрын
I was wondering if you could make a smart mirror tutorial? Thanks for the awesome videos, a lot of the electronics stuff is over my head but i love watching it.
@greatscottlab 7 жыл бұрын
I put it on my to do list.
@eyesofnova 7 жыл бұрын
GreatScott! thank you!
@infinitechgames9293 7 жыл бұрын
lol
@steventitus4399 7 жыл бұрын
I am getting a Pi just to do that project.
@iraklimirzikashvili1111 7 жыл бұрын
I wonder, if there is way to connect that lcd directly to Pi ? (not zero of course). I meen, raspberry pi has some serial port for display and this lcd also has serial port. btw this lcd has touch sensor too. you can see it 4:00 unconected 4 pins
@alakanandaborah6533 7 жыл бұрын
thank you great scott I was waiting for this type of video man thanks
@szerocools 7 жыл бұрын
When you mentioned "Raspberry Pi into Game Console" i was hooked. This is what i wanted to build for decades. My inner child screamed. Then I remember that I had a PS Vita, took me to hours to find under a pile of old electronics. I dusted it off, installed Henkaku, loaded my Emulators, and I was 10 years old again playing Super Mario Wold.
@josiahmitchell530 7 жыл бұрын
You should make some homemade FPV gear :)
@milestogo5629 4 жыл бұрын
Question: as a beginner with no background in science stuffs (I only know a lot about programming) this was a bit hard to understand but nevertheless thank you for the details. I wanted to start something with pi 0 as its cheaper. I was wondering: how do I connect it with a tv?
@HashirEasa 2 жыл бұрын
theres a mini hdmi port if i remember correctly
@crippling-d9645 7 жыл бұрын
lawl i've been making one for the past few weeks. everyone is starting to make these.... best DIY build :D
@TrollFaceTheMan 7 жыл бұрын
Very cool so far, looking forward to the next vid :)
@xpired5328 3 жыл бұрын
Me: Am gonna make a gaming handheld then show to my mom that I am capable of something. After 3 min in the video: Ight imma head out
@AviAceC130 7 жыл бұрын
Instructions not clear. My ass now plays mario theme 24/7
@justblairthompson 7 жыл бұрын
Looking forward to it. Ordered the parts for the same project two weeks ago.
@DoomWalker42 6 жыл бұрын
Those are some mad skills. Well done!
@TheodoreLee00 7 жыл бұрын
omg maxim is my father's company!! :DDD I feel loved
@nici9376 4 жыл бұрын
how cool :)
@neilgoodman6130 3 жыл бұрын
Wow
@ErtugrulOzdemir-mf1gl 3 жыл бұрын
really that must be so cool to have your dad own a giant electronics company
@leisergeist 7 жыл бұрын
if only all engineers had that good of handwriting lol
@crunchytee 7 жыл бұрын
amazing. Your videos are so thorough. thank you for the entertainment
@ineedken5400 7 жыл бұрын
This was really awesome! I loved it!
@DanDart 7 жыл бұрын
"Urgh!" - me when seeing you used windows for that xD I'm sure there are easier ways than hooking everything like that surely?
@17devstudio3 7 жыл бұрын
Where did you get this Raspberry Pi Zero from? I can't find them anywhere?
@greatscottlab 7 жыл бұрын
There are links in the description. (I recommend the Ebay link)
@Beastleviath 7 жыл бұрын
GreatScott! I love the video, and I've been wanting to make one of these for weeks! The only issue is that Making those circuits (the audio, video, and power supply stuff) is a bit beyond my capabilities as of right now. Is there anywhere I can get those boards either pre made or at least in a kit with all the proper materials so I don't have to worry about getting all the right stuff? Thanks!
@zeppike 7 жыл бұрын
Pi moroni and thepihut ships within a week in europe
@Chickennuggetjoes 7 жыл бұрын
If your in the US microcenter sells them for $1
@merpysoup6505 6 жыл бұрын
I got mine on the adafruit website. it's the only place I could find them
@EvanMunozAKAUncleSkuby 5 жыл бұрын
Thank you for this, I have been trying to build a Gameboy Null for a while now and keep messing up the switch. I want to understand the build deeper and this will help a lot! Thank so much! Keep building my friend, I will be absorbing.
@StoneFlange 7 жыл бұрын
Great idea bypassing the buck converter on the screen!! Well done, I can't wait for the next episode :)
@infopackrat 7 жыл бұрын
I love your projects. But on more complex projects like this one you kinda need more details. Everything goes by too fast. Could you do longer version videos of these more complex projects?
@greatscottlab 7 жыл бұрын
+infopackrat No
@somaplay 7 жыл бұрын
Harsh
@CSXBoys 7 жыл бұрын
GreatScott! CRAWLING IN MY SKIN, THESE WOUNDS THEY'LL NEVER HEAL
@needlessoptions 7 жыл бұрын
GreatScott! lmao
@BGDNGSN 7 жыл бұрын
savage
@kirillvishnevsky6327 7 жыл бұрын
3:20 I guess I'll go with one from e-bay :)
@mattdarbro4830 7 жыл бұрын
Really cool project and excellent articulation of the process.
@pkf4124 5 жыл бұрын
Excellent video, makes a change to see all the parts made rather than bought
@Pichipieify 7 жыл бұрын
sadly i didnt understand 90% of this. But i still want to build my own raspberry pi.
@shivarampersaud2332 7 жыл бұрын
Same
@freedomfighter6297 5 жыл бұрын
Genrey Lino Gonzales That's ok.. I'm sure he didn't understand 90% of it either...
@B1akTang1dH4rt 4 жыл бұрын
owari da you need a display driver first before you can connect that to the raspberry pi 0
@alvinduong3399 7 жыл бұрын
hey, you should make anouther update on the electric skateboard
@greatscottlab 7 жыл бұрын
Maybe...
@qgruschkof1518 7 жыл бұрын
Or you also can do a Fingerprint Sensor Arduino Project. Like they did from the Adafruit Institut.
@thedrunkgeek6824 7 жыл бұрын
I like how in the beginning he says "easily create one as well" 2 minutes in and he went all beautiful mind on us!
@sixdsix5028 7 жыл бұрын
Nothing like watching GreatScott to make yourself feel stupid. Great stuff Scott, even if I don't understand most of what's going on.
@eimparas 7 жыл бұрын
Why not use a liion battery
@oniruddhoalam2039 4 жыл бұрын
4 nimh batteries in series creates the perfect voltage
@Wiefreak 7 жыл бұрын
3:30 A piece of _what_ are you using? I can hardly understand it. :D
@greatscottlab 7 жыл бұрын
"...perfboard...."
@creeek3 7 жыл бұрын
Ahh, I wondered what it was, but I could see it is "Veroboard". "perf" meaning.... "perforated"!! :) I understood most, but would obviously need to pause quite a lot, when building. Mainly around the redirection of ports in the config file.
@frederikholfeld868 4 жыл бұрын
i didn't understand very much of this but i appreciate this kind of content a lot. good stuff.
@thibmaek 5 жыл бұрын
No way I could ever make this myself even with these top notch instructions but damn, good work on the video man!
@ceptimus 7 жыл бұрын
It's important to prevent lithium batteries discharging too low, but with NiMH batteries it doesn't really matter if you run them flat. So why bother with the over-discharge circuit? Edit: Maybe the Pi is more likely to corrupt its SD card if the power supply 'brown-outs' gradually? I would prefer to use a single lithium cell with one of those all-in-one charger/protection/boost modules that allows you to charge the cell, steps up the voltage to 5V and cuts out on over current or low cell voltage - you can get those for $2 or so on Ebay.
@JTLowry 7 жыл бұрын
yeah i am puzzled by that too
@Priidik 7 жыл бұрын
ceptimus exactly. Would have been so much less work.
@Ts6451 7 жыл бұрын
Well, that is not entirely true, the system in the video uses a series string of multiple cells, and in such an arrangement complete discharge will always risk damaging one or more of the cells due to reverse charging. In fact, it probably would be an advantage to have balancing and protection circuits on pretty much all chemistries if you want to maximize the useful life of the battery. But I suppose that as long as the battery will not cause a fire if mistreated, a bit of reduced life and risk of damage is accepted to reduce cost and complexity, and if you need to buy a new battery a few months early, well, that is just good for business, isn't it...
@lordPix3lUK 6 жыл бұрын
chill out dude, this guys knows his stuff. just watch and learn
@TuttleScott 5 жыл бұрын
it'll stop running long before that would happen. I'd risk it, nimh batteries are cheap as chips and safe.
@MrSandoron 7 жыл бұрын
In the video you showed the Zero for only 4 Pounds, but it costs way more in the links provided by the description. Where did you find it for 4 Pounds?
@carloscastresanam 7 жыл бұрын
I'm also looking for a reliable online shop to buy the zero in Europe. Any help?
@MrSandoron 7 жыл бұрын
BallisticDK Thank you :D
@bestelisi 7 жыл бұрын
MrSandoron you're welcome :)
@clement614 7 жыл бұрын
it seems like the comment isn't there anymore :c
@carloscastresanam 7 жыл бұрын
Thanks!
@pablo_costas 7 жыл бұрын
I was thinking about making pigrrl zero, but this project is sooo cool, and bigger screen ahha , cant wait for second part
@lokeshrahul8504 7 жыл бұрын
scott what you do for living, your such a genius, love ur work man i think it takes weeks to make this video right ,
@mambobro 7 жыл бұрын
Is there a guide for people at a 2nd grade intelligence? I feel like I need that.
@merpysoup6505 6 жыл бұрын
basically he means that you have to get good batteries, connect everything, download stuff from your computer to the pi, and then you play games.
@MossySparks 7 жыл бұрын
Somebody watched the Gameboy Zero tutorial ahah
@hojustraper 7 жыл бұрын
wonderful project, nice to see a gameboy color come back to life, i still have my gameboy with yellow and black screen. greetings scott!
@GingerNingerGames 7 жыл бұрын
This is really good, I love the way you use the available battery ports. I'm making something similar only I'm using a nintendo DS. I don't know how I'll go or if I'll be able to use both screens, but I sure will try. I might just end up using the bottom screen space for mouse input of some form.
@rensbakker7710 7 жыл бұрын
Who's only watching this to look smart?
@710chase 7 жыл бұрын
Nobody Rens Bakker, nobody except you.
@710chase 5 жыл бұрын
@some random guy on youtube I'm sure it's possible, you might need an adapter from 40 or 30 pin display input to 15 pin display output, I'm not entirely sure if those exact adapters exist though, try looking on Amazon or EBay, you might find what you're looking for.
@Splitface2811 7 жыл бұрын
How do you know all this??
@greatscottlab 7 жыл бұрын
Work, university
@KaienSander10Official 7 жыл бұрын
+GreatScott! For me its KZfaq and the internet 😂
@wayne9005 7 жыл бұрын
GreatScott! What university did you go to?
@dabriagonzaga3345 5 жыл бұрын
I wish I can learn that thing!
@wimwiddershins 7 жыл бұрын
Great guide! Great stuff! Great Scott! :)
@wi_zeus6798 7 жыл бұрын
First of all, very nice video. I'm actually working on a portable retro console myself and I have already done most of the work. Basically I only need an enclosure. Now the interesting part for everyone, who wants to build something similar :) The KZfaqr weremy has an absolutely awesome guide on building the unit into a Gameboy case. And one small thing: I think it's way easier to use RetroPie (Emulationstation) as OS.
@artmag1c 7 жыл бұрын
why not use retropie ?
@greatscottlab 7 жыл бұрын
I tried. But it was way easier to set up recalbox.
@denniswallace8298 7 жыл бұрын
What was easier? Because I run Retropie in My Arcade Cabinet and it's perfect. Would you say that recalbox is easier than Retropie. Or was it just easier to work with a RPi Zero?
@lukes3131 7 жыл бұрын
retro pie was really easy to set up for me
@artur9502 7 жыл бұрын
probably because you cant use gpio pins as controllers in retropie
@derek7808 7 жыл бұрын
i don't understand why everyone still uses Retropie. It was probably the first Pi retro distribution but now there are other solutions. I'm not saying that it's bad, but having tested Retropie, Recalbox and Lakka, in my opinion Lakka is the best and Recalbox is second.
@memaimu 7 жыл бұрын
I don't understand a god damn thing you're saying.
@freedomfighter6297 5 жыл бұрын
眩暈夢 Niether does he ...
@_owen 7 жыл бұрын
great to see u finally made this ;)
@akhurash 7 жыл бұрын
Awesome video. I will have to try this project.
@Chris-tk9hy 7 жыл бұрын
jesus christ......I aint no Scientist pal
@Kisty_ 7 жыл бұрын
911 views xD
@latzobear 7 жыл бұрын
9,330 views
@fryncyaryorvjink2140 7 жыл бұрын
Ahmed Ullah something something steel beams
@Kisty_ 7 жыл бұрын
"jet fuel doesn't burn steel beams" i guess
@Kisty_ 7 жыл бұрын
Jet fuel can't melt steel beams was it actually...
@Kisty_ 7 жыл бұрын
***** No , Great Scott did 9/11 confirmed
@Garrett053 7 жыл бұрын
your drawings look like perfection!
@mrlithium69 7 жыл бұрын
I usually understand what you are doing with these circuits at least summarily, but this one was way over my head with all the voltage regulation stuff. Still very impressive.
@josepvg 7 жыл бұрын
Amazing, love this project of your, thanks :)
@edwinong35 5 жыл бұрын
Genius , who ever know how to DIY a board i admire your knowledge and creative
@freeelectron8261 5 жыл бұрын
Great Scott! That's a lot of work but 1M views - its worth the effort.
@tanbirsohail 7 жыл бұрын
This is one of my favourite youtube channels. When the Pi zero came up I had more than 10 projects in my mind. I thought I am gonna buy at least 20 of these. Sadly, their rarity and local taxes make their price almost USD $28 in my country. Damn. Too hard to get these. I have the Pi 2 and 3.
@jollyreal1 7 жыл бұрын
very impress for what you had done!!
@preferredimage 6 жыл бұрын
Recently built a similar setup using a Pi Zero, this exact screen (did the 5v mod too) and GPIO sound and GPIO joystick. then crammed the whole lot into a cheap gadget shop mini arcade case. Works great with a USB powerbank as a source and charge circuit.
@COLOFIDUTI 7 жыл бұрын
Man whata journey! congrats!
@ebnamar 7 жыл бұрын
OMG bro you are doing a great work.
@BoomBrush 7 жыл бұрын
Again with the part 1! You get me every time :(
@user-gy4nt6ue9p 7 жыл бұрын
Dude, it's like you've read my mind, it exactly what i wanted to see from you :)
@thatflyguysavi4196 7 жыл бұрын
you get the like for your tremendous effort and knowledge
@91Chanito 4 жыл бұрын
Totally understood everything, thanks.
@z77jabbjaw 7 жыл бұрын
wow what a great channel keep up the great work!
@OneCheapEric 7 жыл бұрын
Great project. Just got a helping hand with magnify glass, so I'm hoping to do more electronics projects. Side note: I used the same background music in one of my videos haha. looking forward to part 2!
@nightmere6385 7 жыл бұрын
All of your videos are so smoothly explained and you never seem to become frustrated. I want to see a video of you figuring something out roughly in real time rather than so smoothly produced for just once, so I don't feel like such a dumbass. :)
@pertileluca 7 жыл бұрын
Very nice project!!
Jason Derulo
Рет қаралды 21 МЛН
Immersed
Рет қаралды 61 МЛН