Рет қаралды 19,484
This a DIY build for a remote downstream injector box. I forgot to mention that you should add a fuse at the battery with a 15 or 20 amp fuse. Any automotive style fuse holder & fuse will work. The links are below of the parts I used. I would also recommend Tru-Blu sealant on the hose barbs when installing them into the ball valve. Please like & subscribe to support the channel!!!
Wiring video here: • DS Remote Box Wiring E...
Switch wiring
Black with to ground on battery
Green wire to positive on battery
Red & Yellow to positive input on remote switch
White wire not used
(I ran a ground wire from the battery to the remote switch and the ground wire from the switch to the same ground on the remote switch)
U.S. Solid Auto Return Ball Valve- www.amazon.com/gp/product/B06...
On/ Off Switch- www.amazon.com/gp/product/B07...
12 Volt Remote Switch- www.amazon.com/gp/product/B08...
1/4 Hose Barbs- www.amazon.com/gp/product/B08...
Junction Box- www.homedepot.com/p/Carlon-6-...
1/4 Hose- www.homedepot.com/p/Everbilt-...