DIY Replacing Struts on a 2003 Mitsubishi Eclipse
Рет қаралды 15,717
![[RN] BOBBY MTB](http://yt3.ggpht.com/dRtFsb6Fn1IXGosUxN1z5Uoz5iffuyLDT6vjLDHJd9oMQpFe-am9g9SFP8qhZza3B3MctBXOKw=s48-c-k-c0x00ffffff-no-rj)
5 жыл бұрынDIY Replacing Struts on a 2003 Mitsubishi Eclipse
Music: www.bensound.com
ChrisFix Strut video: • How to Replace Struts ...
Amazon Struts Package:amzn.to/3JzU1fy
@josealaniz4732 7 ай бұрын
I’m about to have to do this soon thank you for the video
@AlAmrhein 2 жыл бұрын
Dude, thanks for posting this! Super informative and the needle nose and jack under the knuckle tips were spot on! Just finished changing out the front struts on my Mom's 2003 Eclipse. Took me 3 hours start to finish.
@NURSEBOBBY 2 жыл бұрын
That was a true DYI project done with no help. Im glad I was able to help. =)
@aaronduncan9155 Жыл бұрын
How did you get you front strut nuts to tight beyond the point of where the piston turns?
@bluedevilz3898 2 жыл бұрын
I installed some and my ride is higher in the front by some inches. Is this normal?
@chrisgonzales5427 Жыл бұрын
PLEASEE what is the torque specs for the two bolts connect strut to knuckle
@NURSEBOBBY Жыл бұрын
Im Sorry this video was so long ago. I don't have that info now. But Google should find it for you. =)
@mq9167 5 жыл бұрын
good video... thank you
@NURSEBOBBY 5 жыл бұрын
Glad to help. =)
@TheShangralaaaa17 4 жыл бұрын
Way to skip over actually installing the spring into the new strut lmaooooo
@NURSEBOBBY 4 жыл бұрын
Because you simply lift the old spring off and place it on the new strut. There is no "installing" as you call it. If it were more difficult than that I would have filmed it. Lift old spring off and place it on the new strut. It does not need to be filmed.
@NURSEBOBBY 4 жыл бұрын
At 9:08 mark I explained "in detail" how I replaced the spring. Its very simple.
@TheShangralaaaa17 4 жыл бұрын
Well the spring has to sit a specific way into the perch of the strut. Im removing the damaged struts on an 06 and was looking for socket sizes required.
@NURSEBOBBY 4 жыл бұрын
@@TheShangralaaaa17 That literally is probably the easiest part of the whole tutorial and the reason it is left out is because I needed 2 hands and could not film it. Again At 9:08 mark I explained "in detail" how I replaced the spring. Its very simple.
@midnitebo 3 жыл бұрын
All he did was put it onto the new strut, put the end cap on and release the tension.
The Car Care Nut
Рет қаралды 886 М.
Ralf's Automotive Diagnostics & Repair
Рет қаралды 13 М.
92KBuilds
Рет қаралды 887
William Steele
Рет қаралды 7 М.