No video
DIY rock sliders
Рет қаралды 2,639
4 жыл бұрынBuilding rock sliders for my overland Kia Sportage project. In an attempt to help protect the body while off road I decided to make my own rock sliders as aftermarket support in the US is minimal for these sportages. Thanks to @tmbfabrication for the tubing and helping get them notched.
@timothyjamieson1282 4 жыл бұрын
Great video and nice workmanship. But how are you mounting the sliders to the chassis? You didn't show us that bit...
@onlinejhons Жыл бұрын
Hey man sorry to ask, but what happen with the silver automatic kia?
@jecustoms52 Жыл бұрын
Ended up having a dead miss after the engine swap and sold it
@micro-pigoffroadclub8387 4 жыл бұрын
Looks great! Do you have a body lift?Or, does the frame set lower off in factory for him to allow the pipes to come straight out and under the body?
@jecustoms52 4 жыл бұрын
No body lift, the body is just tall enough to slip the 2” tubing below it and tie into the frame.
@jecustoms52 4 жыл бұрын
I did just replace all the body bushings though as they are known to deteriorate on these really badly.
@micro-pigoffroadclub8387 4 жыл бұрын
John Elliott Cool! Under armor and body sliders have been on my radar for a while now. You’ve done well my friend.
@Arykperry 4 жыл бұрын
Is this for tall speed bumps at the mall or what ???
@jasonboyce2823 3 жыл бұрын
Do you have the basic demensions of the tubing you used? I plan I doing something similar, but don't want to buy too material. I also wonder if that will hold the weight to use a high lift track?
@jecustoms52 3 жыл бұрын
Watch some of my other videos. I hit them hard, a lot... it is 1.5 .120 wall hrew
@jasonboyce2823 3 жыл бұрын
@@jecustoms52 Thanks
Dirt Lifestyle
Рет қаралды 208 М.
AnythingAlexia
Рет қаралды 32 МЛН
Garage 54
Рет қаралды 4,2 МЛН