IMPOSSIBLE ?? Mazda MX5 NA front sill rust repair

Рет қаралды 513,389

Жыл бұрын

In this the third of a three part video showing the steps of reconstructing a Mazda MX5 NA front inner and outer sill section.
If you enjoyed the video, smash that Like and subscribe button & comment your thoughts down below. It really helps us out!
Check us out on Instagram - / con. .
Check us out on Facebook - / yorkshirecar. .
Check us out on TikTok - / yorkshirecarr. .
Check out the first part in this series where we show you around the car and our initial thoughts:
• Abandoned Datsun ...
Check out our 1980 Suzuki LJ80 restoration playlist!:
• Introducing our B...
Check out our other how to and rusteration videos:
Mk2 MX5 Rusteration:
• Can we Fix the Ru...
MX5 How-To videos:
• How to Remove a M...
Check out the little classic mini restoration!:
• Classic Mini
Check out our MX5 V6 Conversion!:
• MX5 V6 Build
We also have much more content on our playlists as well as big plans for the future!
---MUSIC---
🔻
"Nikos Spiliotis - Helen 2" is under a Free To Use on KZfaq license
• Nikos Spiliotis - Helen 2
Music promoted by BreakingCopyright: bit.ly/b-helen-2
🔺
🔻
"AERØHEAD - Fragments" is under a Creative Commons (CC BY-SA 3.0) license
/ aer%c3%98head
Music promoted by BreakingCopyright: bit.ly/b-fragments
🔺
🔻
"Sappheiros - Escape" is under a Creative Commons license (CC BY 3.0)
/ sappheiros
Music promoted by BreakingCopyright: bit.ly/escape-song
🔺
🔻
"Sarah Jansen - Far Away" is under a Creative Commons (cc-by) license
Music promoted by BreakingCopyright: bit.ly/sarah-jansen-far-away
🔺
----------------------
Nomyn:
/ @nomynmusic
open.spotify.com/artist/5VbsC...
/ nomynmusic
/ nomynmusic
/ nomynmusic
nomyn.bandcamp.com/
creativecommons.org/licenses/...
Music promoted by RFM: • Video
-----------------------

Пікірлер: 456

@murraydawson3728 Жыл бұрын

I love the fact you just show us what we want to see but without all the talking, unfortunately most of the other fabricators on KZfaq spend 80% of the time talking about what they are about to do and the other 20% showing us a very basic overview of the repair, well done!!!!!

@yorkshirecarrestoration Жыл бұрын

We try to make the videos like an action movie :)

@lupulflamand5673 Жыл бұрын

That sill looks great! Nice to see an old car that is not heading to the scrap yard.

@yorkshirecarrestoration Жыл бұрын

Thank you and yes one more saved :)

@Mattlawton-ft6ew 2 ай бұрын

@@yorkshirecarrestorationgreat work very well done

@GT380man Жыл бұрын

For so long as there are cars people love enough to pay for repairs like this, you will have a line of customers coming to your door. This can never be done by a robot or a computer. Kudos. It may sound daft, but the sheer human exuberance and skill in this is actually moving in this crazy world.

@HondasAreNotForChristmas 3 ай бұрын

With the EU's plan to ban these repairs on 15 year old + cars, there will be no line.

@Mattlawton-ft6ew 2 ай бұрын

@@HondasAreNotForChristmas😪

@barryvarga3538 5 ай бұрын

It surely makes a difference when you have the necessary tools and equipment to fabricate the parts. I enjoyed this video of a true craftsman.

@vadimm5520 Жыл бұрын

Наконец-то ! Нормальный автосервис с нормальными специалистами, без гламура и пафоса. Где то на коленке, где то с соответствующим оборудованием. Турбинка без кожуха, двутавр как наковальня. Вообщем красавцы. Много нового и нужного для себя нашел, спасибо мужики 💪👍 . То же кузовщик-сварщик. Привет из России. "Пролетарии всех стран объеденяйтесь !!! " 😁✊

@user-pf3dy5rs3b Жыл бұрын

Кузовщики всех стран объединяйтесь 😁👍

@3D-Modelling 7 ай бұрын

и курят в цеху и молотки ещё старые, совецкие... э-э-э-э... тэтчеровские...☺☺☺

@kellypaws Ай бұрын

I have to say, I don’t care at all about Shmee, or Colin Furze, or anyone ‘famous’. I’m happy to be relaxingly mesmerised by the incredible skill involved in this kind of work.

@RustyShackleford97 Жыл бұрын

Just wanted to make a quick comment before I forget. I've seen the uploads about who's who you guys are very talented. I know you guys or lad's have showed tools, how to make most of the parts properly. I was hoping that you could show us where you Steve started even before a shop. And I think as a viewer that watches a lot of different channels are you planning on what everyone else does as far as rebuild and restoration? Honestly that would really appeal to a wider range of audience. Keep on cracking on love the content.

@joescully566 9 ай бұрын

Steve, it's poetry in motion, a craftsman at the top of his game, love it, Joe

@yorkshirecarrestoration 9 ай бұрын

Thank you Joe :)

@Maksimov1337 6 ай бұрын

It's always super deflating when you spend a lot of time making a panel to then offer it up and figure out you put the very last kink or bend in the wrong place and have to start over. Always found it super demoralising when doing my own cars. It's honestly very heart warming to see even people with far more experience and skill sometimes suffer from the same errors, thanks for leaving that in the vid! Fantastic craftsmanship!

@davidmckinney6577 Жыл бұрын

This is an absolute piece of artwork, so many little curves and bends that was pure joy and extremely educational to watch you guys are the world's best 👌. I love your channel and I love you all to friends

@yorkshirecarrestoration Жыл бұрын

Thank you David. Iv been doing this almost 30 years and it's only now that people can see how much care we take doing the inside as all people.see when the car is done is the outside :) youtube has given me even more pride in our work :)

@davidmckinney6577 Жыл бұрын

@@yorkshirecarrestoration I'll say one thing when you guys fix it you sure do it right it's better than factory when you guys get done with it..I wish I had my jaguar over there so you could fix it.. mine is really rough probably too rough tbh I thought about buying a new old stock car hull and putting everything from mine to the new one

@ianforeman4377 14 күн бұрын

This is the thing. To copy something so faithfully that will never be seen. It’s perfection

@joescully566 Жыл бұрын

To make that outer skin from one piece of metal (( and several cuts) is amazing. Love it all gents, keep em coming, Joe

@yorkshirecarrestoration Жыл бұрын

Thank you Joe that's much appreciated :)

@nealnaz Жыл бұрын

Incredible patience...and better metal work. I also figured out why Steve plays music over the videos...with the difficulty he had with fabricating the shape of that piece, he did not want us to hear all the cursing he was doing. Lol! Please keep these videos coming.

@yorkshirecarrestoration Жыл бұрын

Haha, tbh I never get frustrated at making shapes out of metal as I enjoy it :)

@davidbeckett7291 Жыл бұрын

Origami at its best

@yorkshirecarrestoration Жыл бұрын

Haha it was kinda foldy 😁

@christopherpoucher483 Жыл бұрын

Skill vs time. This man has the skills to make a repair like this worth it.

@yorkshirecarrestoration Жыл бұрын

thank you :0

@lar4305 Жыл бұрын

watching this is like therapy , so relaxing to see an artist at work.

@yorkshirecarrestoration Жыл бұрын

Haha thank you :)

@greyamxr6 Жыл бұрын

Absolutely fascinating watch. Hats off to you Steve true craftsman

@yorkshirecarrestoration Жыл бұрын

Thank you :)

@urdead2meboy Жыл бұрын

so good to see people fix it right like my self and not fill it full of filler and hide it . the amount of time in the body shop i find this when i do repairs is scary . awesome work there top class !

@ToreDL87 Жыл бұрын

Saw some earlier videos, you're like the MX5 bodypanel whisperer. Nice video, perfectly paced and good music to go along, you can really drown out the world when autobody rust keeps asking questions and posing problems.

@yorkshirecarrestoration Жыл бұрын

Haha thank you :)

@drumtochtyglen Жыл бұрын

Steve, my flabber has never been so gasted, this fabrication work is just superb.

@yorkshirecarrestoration Жыл бұрын

Thank you Eddie, I'm sure you know your support is always appreciated :) 👍

@johnboy384 Жыл бұрын

Always impressed how you guys roll a panel to match the curve of the car itself. Love the soundtracks too.

@yorkshirecarrestoration Жыл бұрын

Thank you John :)

@saschareis82 Жыл бұрын

Wow. This is the best welding Restoration Video ive ever seen. Real professional Work👍

@albabmg Жыл бұрын

Metalwork Magicians. Really enjoy watching your fantastic skills at work. Creating something from nothing. Cheers

@yorkshirecarrestoration Жыл бұрын

Thank you :)

@ferguscolman354 2 ай бұрын

This video was a joy to watch, even the "reminder to self " moment near the start, simply added to the humble and honest portrayal of this talented guy, we have all had those tiny "oops " moments so kudos to him for not editing it out ! .....and a nice choice of music too !

@Roboticgladiator Жыл бұрын

I have to say that your videos make the programs shown on the Motor Trend TV channel look like foolish crap. Nice work showing what can be done with basic tooling.

@NickDV007 Жыл бұрын

Great video Steve and as usual great work. Just a few affordable basic tools, a ton of skill and another car saved from the scrap yard 👍 Thanks for sharing.

@yorkshirecarrestoration Жыл бұрын

Thank you Nick and yes another one saved :)

@PetSKi67 8 ай бұрын

Absolutely mesmerizing! Crazy skillfull fabrication!

@theb.f.g9927 10 ай бұрын

Now that's craftsman ship at its finest , amazing work lads . Was a joy to watch such a beautiful car being remade/restored to its former glory like this .

@tonygoshive785 Жыл бұрын

I really don’t understand where you guys get your patience from, this is once again another top quality repair, just wish there were more quality welders like you guys.

@stewartshackleton7825 Жыл бұрын

Totally agree. I learned how to weld when restoring my Ford Puma. This is exceptional work and Steve makes it look easy, but it isn’t. When I picked up my Puma yesterday after MoT and service, the mechanic (not technician!) showed me some welding on a car that he was working on. He explained that the work was done by a welding teacher!! Even with my limited skill I would not have sent out the vehicle in that state. So much for welding teaching today!!

@yorkshirecarrestoration Жыл бұрын

I love my job so guess that helps and thank you for the support :)

@yorkshirecarrestoration Жыл бұрын

Not all welding teachers can weld and specially on car body's, welding old thin sheet metal is a whole diferent ball game from regular welding :)

@techscrew2 6 ай бұрын

I’ve just finished watching this video, this guy is something else, almost like he,s wasted working on cars, he should be a brain surgeon

@jamesward5721 Жыл бұрын

Really neat repair on a very fiddly area Steve. Nice work. They aren't technically very hard to do, but getting the repair to look so smooth is where the real skill comes in. I have to go buy one of them benchtop shears - don't have one & you use yours in every video - a sure sign they're useful.

@yorkshirecarrestoration Жыл бұрын

Hi James. Thank you :) Yes it was only £80 off ebay and gets used all day every day :) a must for sure :)

@GT380man Жыл бұрын

@@yorkshirecarrestoration Wow, bargain. Such a cool tool, that, especially when considering the alternatives are far inferior (hacksaw, cutting wheel, hand snips).

@markfoster7564 Жыл бұрын

Very cool! Master craftsmen right there! Half of your great work will never be seen again!

@yorkshirecarrestoration Жыл бұрын

Yes but I know it's been done right so I'll sleep better 😁

@khyron8509 Жыл бұрын

Poetry in sped up motion 👍It's always a pleasure to watch an artist at work.

@yorkshirecarrestoration Жыл бұрын

Thank you it's also a pleasure to make them as well 😁

@berndcassel2581 Жыл бұрын

Masterpiece,greetings from Germany

@yorkshirecarrestoration Жыл бұрын

Thank you and Hello Germany :)

@cristianpalangeanu3914 4 ай бұрын

I have never met so much patience and passion ! Congratulations !👍

@ollieox4176 Жыл бұрын

Your fabrication skills are mesmerising haha

@yorkshirecarrestoration Жыл бұрын

Haha thank you :)

@markspence9339 10 ай бұрын

Excellent work,in my fabricator welder apprenticeship my teacher always drilled into me about worrying about the parts you can't see as much as the parts you can,looks like you had the same tutor,just subscribed

@yorkshirecarrestoration 10 ай бұрын

Yes I do like to know the bit on the inside are as good as the ones on the outside :)

@deanmarskell1518 Жыл бұрын

Another great video Steve outstanding workmanship as always thank you for sharing with us keep up the great work ♥️👌

@yorkshirecarrestoration Жыл бұрын

Thank you Dean we will :)

@jamesmann7411 2 ай бұрын

Superb demonstration of skills, entertaining and relaxing to watch. Thanks for sharing.

@bobfrankish8883 Жыл бұрын

Wow Steve, possibly the best repair I have seen you do to date. Unbelievable skills. Well done.

@yorkshirecarrestoration Жыл бұрын

Thank you Bob we do appreciate the support :)

@FireFox705 Жыл бұрын

The level of craftmanship you put into your work is amazing, please keep it up

@yorkshirecarrestoration Жыл бұрын

Thank you :) we will :)

@ayeapprove Жыл бұрын

another NA saved, thank you so much for putting in all this work

@valentino246 Жыл бұрын

Absolute skill and class. Much much respect for what you do in your workshop.

@yorkshirecarrestoration Жыл бұрын

Thank you :)

@chrisgarside7974 Жыл бұрын

Love how you sneak up on making the replacement panel - patience with pace ! Nice

@yorkshirecarrestoration Жыл бұрын

Yes it all comes together in the end :)

@paulbutler5604 11 ай бұрын

👍 Great stuff you,ve given me a little hope for the work on my Jeep tj. Thanks Paul

@ColinBarrett001 Жыл бұрын

Love it! What a superb high quality job! Thanks so much for sharing!

@yorkshirecarrestoration Жыл бұрын

Thank you Colin. It's our pleasure :)

@vitorcarriel9515 Жыл бұрын

Pretty good skills from this Guy! My respect from him, It not easy restore parts like that. Bendind metal and create New shape, is the same of art!

@TheDaf95xf Жыл бұрын

Evening Steve. A master at work 👍🏻 It’s amazing how you can see the mess and with a steel ruler and a bit of tin fold it bend it and weld it it looks amazing 🤩

@yorkshirecarrestoration Жыл бұрын

Thank you Steve it's much appreciated :)

@YootubeUK Жыл бұрын

Impossibru? Not for Steve-san! I don't own or want a MX5 but I love the videos all the same. :)

@yorkshirecarrestoration Жыл бұрын

Haha thank you for your continued support :)

@user-ok9cl8cq1o 5 ай бұрын

Excellent work by a true craftsman.

@T3glider Жыл бұрын

Not many would bother to grind the soon-to-be-hidden welds. As a hobby builder I would, but to see it done in a commercial setting on an inexpensive car … bravo.

@yorkshirecarrestoration Жыл бұрын

I have pride in my work :) I would know it's there :)

@batnrs1 Жыл бұрын

proper job Steve👍

@yorkshirecarrestoration Жыл бұрын

Thank you :)

@lindacarter5531 Жыл бұрын

Brilliant job Steve you’re an artist now we know where Ryan gets his talent from 👍

@techscrew2 6 ай бұрын

I would have put any old gash bit of steel in the bit no one can see. This guy is a true perfectionist, I magibe his prices reflect this also

@ufoburnout 4 ай бұрын

I've found finding someone who can be arsed doing this work is more of a problem than paying for it. Never thought that would happen. Even with a full set of replacement panels from mazda to work with.

@elwindewitte Жыл бұрын

So impressed by all the work you do!

@yorkshirecarrestoration Жыл бұрын

Thank you so much :)

@elwindewitte Жыл бұрын

@@yorkshirecarrestoration I know every repair is different, but how much did this repair cost in total for example? Really curious how that compares to the place I've been to

@markw8139 10 ай бұрын

Amazaazing ... my NB2 has got a hole in this exact place... Hoping it won't need this much work!! Amazing skill

@robworrall6832 7 ай бұрын

Bloody amazing skills, how much I wish I could afford to get you to do my Freelander sills but I'm in Devon and skint! Going to try to do it myself, I can weld a little but watching the panel forming skills here humbles me tbh. Big respect and so nice to see things being done so well. I'm very glad my repair job is a lot more simple than the Mazda here OMG!

@12jsteve 6 ай бұрын

Steel sheet metal origami of the highest order! Great stuff 👍👏

@135Ops Жыл бұрын

Outstanding craftsmanship!

@davebarron5939 11 ай бұрын

Totally impressed every time. Thanks

@jorgerosales609 4 ай бұрын

Beautiful work...makes me feel even I can do it!!!!!

@paulbateman3001 Жыл бұрын

Well done again Steve great workmanship 😊

@yorkshirecarrestoration Жыл бұрын

Thank you Paul :)

@colinritchie1757 Жыл бұрын

Nah nothing is Impossible - well that's how it seems watching this repair - brilliant as ever

@yorkshirecarrestoration Жыл бұрын

Haha thank you :)

@mikeafa1 Жыл бұрын

Wow, amazing job Steven! I may have to watch this artistry in action one more time. It's amazing how all your pie cuts and angles resemble the original sill bottom. Fantastic work! Only thing I observed is you didn't drill holes and place nuts behind the bottom of the sill for the front fender to attach to. Two threaded 10mm bolts secure the fender as you know.

@yorkshirecarrestoration Жыл бұрын

Thabk you Michael, self tapping bolts then Waxoil are what we use :)

@mikeafa1 Жыл бұрын

@Yorkshire Car Restoration Less likely to rust and seize up in the hole over time as well. Thanks.

@petergoodwin2465 4 ай бұрын

Fantastic work mate , im doing very similar to the wifes impala. Panel beating is a hard job. Enjoyed every minute of this.

@Garffey Жыл бұрын

Amazing job Steve....Love watching what you can do with flat sheet rather than buying repair panels! If my Mx-5 ever needed rust repairs I know where I'd go!....👍👍

@drumtochtyglen Жыл бұрын

The inner upright which was the first panel that Steve repaired is not available as a ready made panel. While the outer sill is available there were other small bits and pieces that would need fabricated to complete this job.

@Garffey Жыл бұрын

@@drumtochtyglen thanks for the info I wasn't sure what panels were available, and we've all seen the poor fit some panels are made with and probably would cost far more too!

@yorkshirecarrestoration Жыл бұрын

Thank you, we would be happy to do it if needed :)

@carolbond4705 Жыл бұрын

You wouldn't know that section has been restored great job again.

@yorkshirecarrestoration Жыл бұрын

Thank you Carol :)

@stephenpatterson8296 9 ай бұрын

That’s bloody sorcery! Amazing

@tipsandtricks5258 Жыл бұрын

My goodness you are a genius. All credit.

@Ateliervollegaaz Жыл бұрын

it's like origami with sheetmetal! well done mister!

@yorkshirecarrestoration Жыл бұрын

Thank you David :)

@ukexbreakdownman Жыл бұрын

fantastic workmanship and attention to detail

@yorkshirecarrestoration Жыл бұрын

Thank you very much!

@BoostedNDMiata 8 ай бұрын

I got lucky. Purchased a clean straight 1990 NA only to find not a speck of rust anywhere. This will be the perfect platform for my next build now that the ND1 is finished.

@1967250s Жыл бұрын

Brilliant. I am going to borrow some of your tricks! Thanks!

@yorkshirecarrestoration Жыл бұрын

Thank you, glad they help :)

@jeffsheriton385 7 ай бұрын

❤ your a master of metal its absolutely beautiful to watch

@romeldphillips3146 3 ай бұрын

Absolutely fantastic job

@ratman9802 Жыл бұрын

I was fascinated by your ability to develop a complicated shape by eye and a great deal of skill. It shows that it can be done and how. (Sigh) I have a long way to go.

@yorkshirecarrestoration Жыл бұрын

Keep practicing, one day it will just click into place and feel second nature :)

@deebee3901 Жыл бұрын

Love your work Steve!

@yorkshirecarrestoration Жыл бұрын

Thank you I do appreciate the support :)

@FastTrack-1 Жыл бұрын

Quality work... A pleasure to watch

@yorkshirecarrestoration Жыл бұрын

Thank you for watching :)

@edsmachine93 10 ай бұрын

Very nice work. Fantastic job.👍

@geoffdaniels4946 7 ай бұрын

Wow this man is more than good. 👍

@rolanddix6676 Жыл бұрын

some serious fabrication there, great result!

@yorkshirecarrestoration Жыл бұрын

Thank you Roland :)

@barryturner1152 Жыл бұрын

One word, amazing!😊

@yorkshirecarrestoration Жыл бұрын

Thank you Barry :)

@jeffhammond8969 Жыл бұрын

Just amazing fabrication skills!❤

@yorkshirecarrestoration Жыл бұрын

Thank you Jeff :)

@robundjacq Жыл бұрын

Great job Steve your the best!

@yorkshirecarrestoration Жыл бұрын

Thank you Robert :) 👍

@claireparkinson2044 Жыл бұрын

What a piece of art well done🎉

@yorkshirecarrestoration Жыл бұрын

Thank you Claire :)

@stevenmackay9192 Жыл бұрын

Without blowing too much smoke up ya Ass Steve, your level of skill astounds me. Well done mate.

@yorkshirecarrestoration Жыл бұрын

Haha thank you Steven, the compliment is appreciated :)

@R1chy11 Жыл бұрын

So good 👌🏻 would love to see how the inner sill is done from inside the car

@yorkshirecarrestoration Жыл бұрын

The inner sill isn't done from inside the car. The back in nner edge is done from inside the car and the inner sill edge section is done when we cut of the bottom of the inner arch that was rusty but thank you for your comments.

@leeopenshaw9302 Жыл бұрын

Always great work Steve 👍👍

@yorkshirecarrestoration Жыл бұрын

Thank you Lee :)

@michael-esser75 11 ай бұрын

You are a real artist

@yorkshirecarrestoration 11 ай бұрын

Thank you very much :)

@heinernestel2080 7 ай бұрын

Excellent job!

@johnbelwell2461 Жыл бұрын

I like how you work and i've done similar things and i know what a headache is to constantly being on the make of metal parts that weren't expecting, it's stressful to go that far and then the right next minute think if you can make it to the next panel. I really like what i see on this channel. To be honest cars are overcomplicated structures whereas they could be simplier, it's such a shame to have endless sheet metal going to nowhere and trapping so much rust making any repair extreme.

@yorkshirecarrestoration Жыл бұрын

Thank you. They are sometimes complicated but I love fabricating and I also love a challenge :)

@stevehill4615 Жыл бұрын

@@yorkshirecarrestoration gotta agree there is no better feeling when you've repaired and/or fabricated something and at the end look at it and think I did that, loved that sheet metal curve bending frame made from 3 pipes welded together a great idea inspires me to make one for myself.