DIY Self Cleaning Blast Gates (Best DIY Design)

Рет қаралды 37,850

Күн бұрын

This DIY Blast Gate is a super simple and effective build. You can knock out several of these in one day with scraps you have around the shop.
Make Nashville (Super Awesome Maker Space):
makenashville.org/
@makenashville
Blast Gate Inspiration Videos:
• Simple, Cheap Blast Ga...
• Advanced Dust Collecti...
• Shopmade 4" PVC Blast ...
• How To Make 4" PVC Bla...
My Most Used Tools (Affiliate Links)
Dewalt Drill Set- amzn.to/2MlAwzl
Total Boat Resin- amzn.to/3r6W3dH
Dust Collector- amzn.to/3j1VGi1
Table Saw Blades- amzn.to/3j2mWg6
Router Lift- amzn.to/2MbNOP1
Miter Saw- amzn.to/3aoX8a4
Electronics Screwdriver Set- amzn.to/3ag5NM2
Dewalt Router Set (You Want The Edge Guide)- amzn.to/2MoGGP4
Wood Glue- amzn.to/3j5ncLs
Quick Setting Wood Glue- amzn.to/3coFENT
Jet Lathe- amzn.to/2NUM64X
Bandsaw- amzn.to/3r9MFGs
Dewalt Planer- amzn.to/3cvIIaS
Essential Channel Lock Set- amzn.to/3oEFjsK
Music:
Ostsee by Sascha Ende
Link: filmmusic.io/song/522-ostsee
License: creativecommons.org/licenses/b...
Friedenstaube by Sascha Ende
Link: filmmusic.io/song/286-frieden...
License: creativecommons.org/licenses/b...
Green Groove by Rafael Krux
Link: filmmusic.io/song/5451-green-...
License: creativecommons.org/licenses/b...

Пікірлер: 45

@enzprintco.8625 Жыл бұрын

Those blast gates are GRRRRRRREAT! Assuming there’s no rockler sponsorship on the horizon lol

@CombsDesign Жыл бұрын

I wouldn't ever want to work with them or recommend them after my experiences with the company. My integrity is worth more than their money or free products lol.

@gagarese 3 жыл бұрын

Great video. I like the salvaging part. Only one comment though, the way you are ripping your plywood is extremely dangerous and can result in a kick back. I know you are using a sawstop so you are not worried about your fingers but the way you are pushing the off cut and leaving the actual piece hanging out between the fence and the blade could result in shooting that piece towards you. Use a push stick and keep that piece supported and push it through all the way and don’t worry about the offcut

@CombsDesign 3 жыл бұрын

Thanks! Even though I have a saw stop, I still treat the saw as if it does not have the feature. I use a push stick most of the time, but will often do a single cut without it in situations where I am needing a clearer camera angle for the video. Luckily I have moved some things around now so I don't have to do that any more in my newer videos.

@matthewkarstens4822 2 жыл бұрын

@@CombsDesign Sorry man. No camera angle is worth kick back. I can show you the mark I still hold over a decade later. Use a push stick/ block every time.

@FrederSnorlax 2 жыл бұрын

when he put his hand on top of the wood, as he pushed it *over* the dado blade - i had to look away.

@weekendwarrior9570 3 жыл бұрын

Excellent video and process. Thank you for sharing.

@CombsDesign 3 жыл бұрын

Thanks! The videos take a lot of work, I am glad they could be helpful!

@GurnIII Жыл бұрын

Great video. Def going to try and build these when I get my dust collection system in. Guessing from your video, you're not a Rocker fan...LMAO. I'm with ya!

@CombsDesign Жыл бұрын

I’m not sure why so many KZfaqrs endorse their stuff. A lot of it is cheap junk, other stuff solves made up wood working problems lol. I guess money will make someone sponsor just about anything.

@paulbarnes8337 3 жыл бұрын

Thank you! Perfect video with great detail and a unique design.

@CombsDesign 3 жыл бұрын

You're very welcome! Thank you for checking out the channel!

@jaykepley5238 3 жыл бұрын

Nicely done! Stay safe.

@CombsDesign 3 жыл бұрын

Thanks! I am certainly trying to lol.

@SRG-Learn-Makers Жыл бұрын

Really cool. Thanks for sharing.

@davidstrachan734 3 жыл бұрын

Nicely done. Very concise!

@CombsDesign 3 жыл бұрын

Thank you so much, I pulled together a lot of different ideas from across KZfaq.

@mikaelbenitah7774 3 жыл бұрын

Really love your video! Thanks for sharing , keep going !!

@CombsDesign 3 жыл бұрын

Thank you so much! I appreciate your support!

@markkoons7488 3 жыл бұрын

Your design is a big improvement over those I cobbled together 40 years ago and, because I'd like to build all the gates I need in one day, I'll forego the nifty looking single pivot design Katz-Moses and some of the others demonstrate. I need 2 @ 8", 5 @ 6", 4 @ 5" and 2 @ 4". The straight edges of your gates lend themselves to modification to serve as secure mounts directly to the wall and two-point suspension several feet below high ceilings. With your straight-forward design I might actually get all 13 pieces done in one long day though I shudder to think of the mess it will make without central dust collection. Thank you for posting this video. PS: Rockler deserves every thump you dished out.

@CombsDesign 3 жыл бұрын

This is a super quick build that can very easily be batched out! Best of luck getting all 13 done, I think you can do all of them if you build all the parts first and assemble them almost like a factory production.

@markkoons7488 3 жыл бұрын

@@CombsDesign As a pup I worked on a few factory assembly lines. What do you think of sandwiching in a layer of paper on both sides of the central laminations to gain a little clearance for the slide?

@CombsDesign 3 жыл бұрын

I’ve actually never tried that so I don’t know for sure, but I don’t see why that couldn’t work! Adding paste wax will help a ton for sure, but you’ll definitely need some physical clearance as well.

@lukeinkson 3 жыл бұрын

Great video! Well recorded, edited and narrated 👍 new sub here

@CombsDesign 3 жыл бұрын

Thank you so much! I will have some new content out soon!

@markkoons7488 3 жыл бұрын

An Irishman here on KZfaq built a similar design but chamfered the edges. Of course, that makes the outside age gracefully. One or two coats of water-based varnish will keep your gates nice for a lifetime of use. No kidding, I'm ashamed of the crap I made when I was young. Those gates are now in the firewood pile.

@CombsDesign 2 жыл бұрын

Haha, I have a plenty of failed projects myself! Chamfering would be a good idea.

@ModernRemade 3 жыл бұрын

Great design man! Love the detailed walkthrough. You had me at magnets. Got a sub from me :)

@CombsDesign 3 жыл бұрын

Thanks! I really appreciate it! If you like the magnets, I am working on a pretty intense project now that I think you will be back for!

@billmoore8771 Жыл бұрын

I lost a big chunk of my thumb making dado cuts like you did here. Using your fingers to hold the piece down as you slide it over the blade is asking for trouble. All it has to do is catch the blade and sling it out of the way and your hand drops onto the blade. Don't mean to preach here, I did it the same way for twenty years before it happened to me. It's just a matter of time. Other than that, nice design, nice vid.

@aaronm8046 3 жыл бұрын

Really enjoy the videos! I have been following your channel for a few months, your video has inspired me to take my blast gates to the next level. My wife and I have a woodshop channel called "themckeels" this weekend I'll make a build video with this design. I was wondering if it would be okay if I quote your video and add a link to it in our description? I really like your design, but in addition to your design, I'll be adding micro limit switches that will automatically turn on and off my jet dust collection system. Let me know what you think! Thanks Aaron*

@CombsDesign 3 жыл бұрын

I am glad you enjoy the content. Feel free to quote the video, I can't wait to see what you make!

@stephanhepp9763 5 ай бұрын

Nice Work! Definitely worth to recreate... But the way you 'lead' your wood through your table saw scares me to hell every time. PLEASE use a push block in the future and don't put pressure on the offcut side till the end of the cut.

@Overit5000 3 жыл бұрын

Y’all remember when making wooden blast gates was cheaper than buying plastic ones 😂

@CombsDesign 3 жыл бұрын

Lol, the wood ones are still better though! 😂😂

@ScreamingEagleFTW 2 жыл бұрын

it says "made in taiwan" for a tiny island they sure make a lot of stuff there.

@bobwebberkc 3 жыл бұрын

Why did you call the rocker D.C. “junk” I would like to know I’m shopping now

@CombsDesign 3 жыл бұрын

For a few reasons, first, the plastic pieces are not bonded well with glue, so the 2 parts separate very easily. Second, they are so light that they will just close on their own from time to time when using tools. This will stop the collection without you realizing it, and make a mess. The third thing is the biggest problem, they have a huge design flaw. There are open cavities in the blast gate that fine dust will get impacted in, but there is no way to clean it out. In my experience with about 6 or 8 of these, they all stopped being able to close fully due to impacted dust after a few months. Finally, Rockler has terrible customer service in my experience, so I avoid them when possible. For me, it was $80 in the trash after a few months, except for the salvaged parts.

@bobwebberkc 3 жыл бұрын

Thanks for your in put much appreciated

@CombsDesign 3 жыл бұрын

@Bob Webber I just realized that you were asking about the dust collector and not the Rockler Stable Gate, here is why, and sorry I misunderstood! kzfaq.info/get/bejne/o9eSmJd6p7GZdI0.html They are both terrible products, I did not feel like a negative tool review belonged on my Combs Design channel, so I put it on my personal account. I sent the video I linked above to Rockler and I had a customer support representative tell me that the amount of dust I saw on the infeed side was normal.

@bobwebberkc 3 жыл бұрын

Thanks again..... I understand now. Did you ever find out what the problem was. Did’nt get 650CFM? Dust collection is all about flow at the tool. Have not bought yet still shopping. I need around 950 CFM at the collector to get what I need at the end of my piping run. I appreciate your candor thanks again

@CombsDesign 3 жыл бұрын

No idea what the problem was, Rockler continued to insist that it was not a faulty product. My advice would be to buy oversized even after doing the math. The Jet 717515 would probably work for you, they only list CFM at 6", so you would probably need to call for the rating at 4". I have the next size up from that one and it does a great job. The 30 gallon drum fills up surprisingly fast, though. For me, the Rockler unit ended up in the trash.

@robertbutler8004 2 жыл бұрын

Using superglue to speed up the gluing process is no trick at all people have been doing the same for many years you are just copping others.

@CombsDesign 2 жыл бұрын

Never said it was original, just sharing it with people who might not know the trick.

@wiseoldfool 2 жыл бұрын

If you are going to criticize someone, you should at least check your spelling. You may also want to investigate punctuation. How many videos have you produced? Have you designed some awesome blast gates? I need some.