A permanent exterior landscaping composite table that even beginners can assemble in just 6 minutes!
◀ Kim Ji-woon’s site Wikipedia ▶
The definition of synthetic wood is a form made by mixing wood flour and PVC ingredients.
There are two types of synthetic wood: classification by composition and type of processing.
There is a type made by mixing wood flour and PVC ingredients.
The most important factor is whether the type of wood flour contains sugi (cedar) or bamboo ingredients.
There are two types of processing forms: semi-finished solid form.
Synthetic wood prices vary depending on the production area and import status through website or phone call.
The definition of synthetic wood is a form made by mixing wood flour and PVC ingredients.
Advantages and Disadvantages of Synthetic Wood The advantage of synthetic wood is that it is semi-permanent.
Durability is superior to that of wood.
Disadvantages of synthetic wood include high waste costs during demolition and high construction material costs.
Synthetic wood siding products are also available for other purposes.
Synthetic wood exterior material has the same meaning as synthetic wood siding.
Siding refers to a construction method that is installed on the side.
◀ Kim Ji-woon’s 1-minute post ▶
Nokiha composite table making frame chair assembly
◀ World Construction Materials Site Manager Shin Woo-ram ▶
The hexagon shape should be on the outside
Make a triangular frame shape and insert the pieces into the holes.
Please tighten it with the round part.
Hold the bottom part with the included wrench and then join it.
Repeat tightening the remaining parts. Tighten a total of 4 like this.
Left leg! It is on the left side because the two pillar parts come outward.
It's completed, and I'll make the right part in the same way.
The same goes for the right side. Place the large hole toward the outside and connect it.
◀ Kim Ji-woon’s 1-minute post ▶
Be sure to check the shape of the frame and pieces properly!
◀ World Construction Materials Site Manager Shin Woo-ram ▶
Like this, the right leg is also completed.
Then C subsidiary material
It's the smallest part
Even the smallest part
What happens to the left and right frames
Place them equally and combine them
It is displayed as two
In the case of C material, assemble in the same way, but there are two holes, only the one at the bottom is the smallest.
You can assemble it with bolts. If you put one side in and look at it, you will see
The hole on the other side may not fit. For this part, pull the leg foot or
When you push the hole, the hole aligns, so you just need to align the hole and assemble it.
◀ Kim Ji-woon’s 1-minute post ▶
It is always the hexagonal part on the outside and the round part on the inside.
◀ World Construction Materials Site Manager Shin Woo-ram ▶
If you assemble it by aligning the holes like this, the final result is here.
You can check that the top is level. The same goes for the other side.
If you have completed up to this point, the left and right frames are completed.
While we can support each other
I will show you how to fix it with D material.
In the case of D subsidiary materials, the cross piece is used to secure them.
In this case, we will proceed by replacing the bit.
Now we are going to assemble the D material, but from here on, it may be a little difficult to do it alone.
In my case, doing it on my own is enough.
Representative, please hold on to this just once.
I told you the big hole is on the outside.
Put it in once rather than assembling it right away in the big hole.
If you look through the small hole, there is a groove here.
We will combine it according to this groove.
◀ Kim Ji-woon’s 1-minute post ▶
There is a risk of the piece breaking, so be sure to do so! We recommend working with 2 people!
◀ Kim Ji-woon’s 1-minute post ▶
And in the same way as below, we will assemble a total of 6 ribs in this way.
◀ World Construction Materials Site Manager Shin Woo-ram ▶
And the same goes for the other side
What you are seeing now
Two D-materials on the left and right were used to complete the chair base.
now at the top
...?
◀ Kim Ji-woon’s 1-minute post ▶
Joseon's counterattack
I only play alone
This is World Construction Materials, where people work with a smile.
◀ World Construction Materials Site Manager Shin Woo-ram ▶
Let's assemble the part that becomes the top plate with D material.
◀ Kim Ji-woon’s 1-minute post ▶
It appears to be firmly fixed even without holding it from the other side!
◀ World Construction Materials Site Manager Shin Woo-ram ▶
If you did this, the top
Since the purchase of D subsidiary material is completed and the left side is completed, the right side is also done in the same way.
Just assemble it with the same pieces.
◀ Kim Ji-woon’s 1-minute post ▶
It is recommended that two people assemble it together.
#diy #garden #table #synthetic wood