Awesome. Companies in our small town won't even do this work, so we're in a forced DIY situation. Thank you so much for listing materials and tips! I've been most concerned about what materials I should use.

Nice video. Good Info. BTW, use a big plastic trash bag inside the 5-gallon pail to separate the plaster from the pail, so you don't need to have one pail for each bag of plaster.

Beautiful renovation project, thank you for sharing!!!

3 years later, how is it holding up??

Such a calming song for a stressful job

Thanks for posting an interesting experience. I'm in the middle of my re- plaster and re-tile project. There are some significant differences though. 1. I removed the tile and the plaster. I got down to the concrete shell and addressed a few exposed rebar spots so as to not have any issues related to exposed rebar later. 2. I replaced the plaster with a pebble infused product in my case Stonescape. I've had it installed on my first pool and the upkeep and maintenance is minimal compared to plaster 3. I wanted a glass tile too, it looks killer, as does yours. My research led me back to porcelain tile because of the difficulty of glass tile adhering to to the pool over the long run. I have to believe you researched and came up with a bonding solution you have confidence in, congrats on your DIY it looks great.

What product did you use as a DYI for the plaster?

Nice job

did u guys made sure to knock every square inch of the plaster for hollow points? If you even missed one hollow point , everything u done would be undone over the years. Thats why some ppl just dont wanna gamble with just putting new plaster over existing old plaster. And that is why some contractors will just break it all da way down to the gunite or w.e its called. How is the pool holding now?

How much was it for just the plaster itself? Do you have to order it online only? I have to do the same project but previous owners had already put new tile only. That only leaves me with having to replaster the pool.

Question, I'm thinking about doing the same project to save $16k, Do I need to chip off all the old plaster on my pool?

You didn't replaster, did you?

How did you drain it without popping up

What cost $7000? The tiles? Cause I had my pool resurfaced with new tile for not much more than that, and they stripped down to the bare concrete! I got bids from $4990 to $22,000, and the one I went with wasn't even the lowest bid. How many quotes did you get? I find prices vary wildly with contractors, and you don't necessarily get what you pay for either. They knocked it out in less than a week 4-5 guys and they needed at most 4-5 hours on the longest day, most of that time was just letting stuff cure.

Allo

But don't show us step by step how you did it, or how much you ground out to fix the steps in some of the other divots that you had in the walls, did you go on an angle did you go to reverse mortise or did you just slap it on there, no telling us how you mixed it was it a 2:1 ratio 3:1 pretty useless video really