DIY Table Saw WORKBENCH Dewalt 7491

Рет қаралды 562,409

Күн бұрын

This is my mobile workbench with a built-in table saw (Dewalt DWE7491). It acts as an outfeed table, assembly table, work surface, and has plenty of space for storage. My table saw workbench is a big upgrade from my old rickety workbench.
If you are interested in the plan for building this workbench, it is available on ETSY, here is the link vanislestudiostore.etsy.com.
There are two Imperial versions of the plan and one Metric version of the plan.
One Imperial plan uses regular sized 2X4's (3.5 inch X 1.5 inch) that are available at all Big Box stores like Home Depot.
The other Imperial plan uses dimensional 2X4's that have been planed to a final thickness of 3 5/8 inch X 1 13/16 inch. This is the exact size of lumber used in this video.
The Metric plan uses regular sized 2X4's (38mm x 89mm) that are available at all Big Box retailers.
Link to Mr.Vereshchak Miter Saw Station Video
• Miter Saw Station
00:00 - Intro
00:11 - Table Features
00:59 - Frozen Soaked Lumber
01:22 - Sketchup Design
07:07 - Need More Support
09:00 - Straight 96” cut frustration
11:42 - Bolts and Washer Dance Party
12:20 - Installing Adjustable Shelf
15:08 - Closing Shots
Links below are affiliate links, by clicking on them I'll earn a small commission at no cost to you. Clicking on them really helps me. As an Amazon Associate, I earn from qualifying purchases. Thank you!
SUPPLIES USED:
Leveling Casters amzn.to/3PtdGCA
TOOLS USED:
Countersink Adjustable Drill Bit amzn.to/48FtB9J
Freud 1-1/8-Inch Diameter T-Slot Router Bit amzn.to/46Nt6c7
Freud 3/4" Diameter Double Flute Straight Bit amzn.to/406hqPb
FREUD FLUSH TRIM BIT amzn.to/3ZXGIPu
DIABLO 8-inch DADO amzn.to/3EMJJsd
DEWALT 10-Inch Table Saw amzn.to/461bI3h
DEWALT Planer DW735 amzn.to/48yGsJC
MAKITA Plunge Cut Circular Saw amzn.to/3PQfR4o
BOSCH Combination Router amzn.to/48qgR6A
METABO 6-inch Orbital Sander amzn.to/3H65QL8
SWANSON 12-Inch Speed Square amzn.to/46GRBaH
SWANSON 18cm Speed Square amzn.to/3EOnpyg
DEWALT 12-inch Speed Square amzn.to/3t8UfaE
IRWIN QUICK-GRIP Clamps amzn.to/3PtDa2C
Kreg Tool Pocket-Hole Jig amzn.to/461cLjJ
#workbench #woodworkingplans #tablesaw #woodworking #DIY #dewalt #assembly #sketch #workbenchbuild

Пікірлер: 812

@mr.vereshchak 5 ай бұрын

Hі! Watched your video - cool result! Glad that my ideas are useful and help to create new interesting projects) Good luck! Best regards, Mr.Vereshchak

@vanislestudio 5 ай бұрын

Hi! Wow!!! Mr.Vereshchak I'm so excited that you left me a comment! You just made my weekend. You have amazing Ideas and I love the Adjustable Router Sled that you are working on now, well, that and anything you make with you hands in that super cool shop of yours. I'm looking forward to Part II of the router sled. Thanks again for leaving a comment and saying Hi! It means a lot to me. Cheers, Paul

@LAZA505 4 ай бұрын

Morning 0:30

@mickeyh2561 2 ай бұрын

Man, man , man, that's a one million Dollar workbench, not worth the money.

@mickeyh2561 2 ай бұрын

You should watc " hooked on wood " But being an American, I think you won't. Made in America is "made in China"@@vanislestudio

@deedledeedle8790 Ай бұрын

@@vanislestudiowhat song is that around 3:30?

@harbirarora5526 3 ай бұрын

This is insanely clean build…looks strong, durable and functional..congratulations

@vanislestudio 3 ай бұрын

Hi thank you for your feedback! Its a pretty hearty workbench and I really appreciate you letting me know what you thought, Thanks so much again! Cheers

@SiberianBarn 4 ай бұрын

Just built this table using your plans over the holiday. I modified the end for my SKIL Jobsite Table Saw and it looks and works great! Gives me more room in my garage because of the mobility of the table and I can level the table thanks to the castors you linked. 👍🏼

@vanislestudio 4 ай бұрын

Hi @sliverdelorey6525! Reading your comment made my day! Thank you for letting me know how it went, and I'm really excited for you! and that your workbench looks and works great! Also the fact that you modified it to accept your SKIL job site saw is on another level! Just fantastic!! Again, so awesome to hear and I hope you get some great use out of your nice new workbench. Cheers bud! All the Best, Paul

@zemlejna1 2 ай бұрын

Were you also paying so much attention to the flatness / levelness ? How did it go?

@user-zp4pj6xr1v 6 ай бұрын

Great workbench! Very similar to one I built a while back, I like how you conquered the leveling issue. I added a chop saw to the other end, could use the same leveler bolts.

@vanislestudio 6 ай бұрын

Chop saw to the other end is a great idea! Thanks a lot!

@user-sp7jg3fn7k 2 ай бұрын

never saw a woodworker so Precision as you that i had to comment you good job

@vanislestudio 2 ай бұрын

Well, thank so much for that! I'm sure there are plenty more precise than me out there, I just try to do my best with what I have and I really appreciate your comment. Cheers

@EliteDadBod 5 ай бұрын

man I love this design. What I had pictured in my mind for what I wanted is basically this. Except I didn't even think about leaving the space for the fence. 10/10 build

@vanislestudio 5 ай бұрын

Hey @EliteDadBod ! I love your name btw! and so awesome you appreciate the design! Made my day :) Have fun when you build your bench, Cheers Paul

@AlanPieroway 16 күн бұрын

Looks like a work of art. Love the attention to detail especially the place of all the screw points.

@vanislestudio 11 күн бұрын

Hi Alan thanks for that! I've always appreciated a good pattern of screws lol. Funny you mentioned :) Cheers

@lucasfrancamarchezam5439 3 ай бұрын

Just loved the Les Paul knob on the miter saw fence!!! Best regards from Brazil!!

@vanislestudio 3 ай бұрын

Hi @lucasfrancamarchezam5439 from Brazil!! You noticed it was from a Les Paul!! That's so awesome and made me smile, Thanks so much and Cheers from Canada!

@Ron-FabandBuild 2 ай бұрын

This is a great idea for the portable contractor saw collection. Unfortunately , I do not have the room for that in my shop at the moment. Absolutely great features and design. Great job.

@vanislestudio 2 ай бұрын

Hi Ron i really appreciate your feedback and so great that you appreciate the features and design. It was a fun, challenging and rewarding build on my part and Thank you for checking it out. Cheers Paul

@DaveDorenbergVeltman 6 ай бұрын

Nice. I like the feature to adjust the saw to the table. I also noticed the riving knife release lever. I am about to build my own worktable/saw with the same DeWalt table saw and I totally forgot that lever. Thanks for remembering me so I won't make that mistake. 👍

@vanislestudio 6 ай бұрын

HI @DaveDorenbergVeltman well I'm glad you noticed the lever cut out, so you can access it once you build your table! I'm sure it will turn out fantastic! Thanks a lot for stopping in! Cheers Paul

@saltysaty8686 4 ай бұрын

This whole video is a pleasure to watch and plenty of useful tips like the jig you setup to make your lagbolt plugs I will absolutely be using that if i need to drill out the center of wood circle. Its just awsome to watch you work!

@vanislestudio 4 ай бұрын

Hey @saltysaty8686 I really enjoyed reading your comment! Thanks so much for that and I'm really happy you enjoyed watching :) All the Best! Paul

@chrisfiggures 5 ай бұрын

What a great-looking, useful project! The care and perfection implemented for the whole assembly was extraordinary. What impressed/amazed me most - was the video - including the informative narration, camera angles/perspective lighting and movement. The editing is amazing! More please!!!!! Wow!

@vanislestudio 5 ай бұрын

Hey @chrisfiggures! Well shucks buddy, Thanks so much for your way to kind words there! As YOU know, working with tools, wood, cameras... what could be better. Maybe working with a buddy working with tools, wood, and cameras ahahah! Thanks so much again for checking out my video buddy! Means a lot. Cheers Paul

@chrisfiggures 5 ай бұрын

@@vanislestudio omg. That WOULD BE AMAZING!

@DISABLED12-7 3 ай бұрын

I love the leveling design and the sliding T-slots in the legs. Very clever. This table looks sturdy enough to build a tank on.

@vanislestudio 3 ай бұрын

Hi @wenchmagnet thanks a lot! Its a beast and has some weight to it, that's for sure. Thanks again Cheers !

@anderslindberg5761 6 ай бұрын

I thought I was pretty good until I watched your work. WOW. It is absolutely mind blowing.

@vanislestudio 6 ай бұрын

Your to kind! But awesome of you to let me know and thanks for checking it out! I'm sure you do great work BTW!

@RareRiddemz 6 ай бұрын

*Very* unique with the adjustable height platform for the saw! Really cool editing too. Nice work!

@vanislestudio 6 ай бұрын

Glad you like it @RareRiddemz! Thanks for checking out the build Cheers!

@altorres4760 7 ай бұрын

Hello, I'm recently retired and transitioning to woodwork. I have a 4x8 well-made table and planning to add my DW7480 and my router to it. I enjoyed this table built and I'm incorporating this leveling system in it. Great job. I keep telling my wife about how many woodworker are left-handed and how good they are. That includes both of us!! 😀😀

@vanislestudio 7 ай бұрын

Hey @altorres4760 Congratulations on the retirement! Had a good laugh about the left handed woodworkers :) So true! I like the size of your table and I think you will like the levelling system! Thanks for your comment and stopping in! Paul

@pieces94 6 ай бұрын

That’s a great build and an excellent way to adjust the table height!

@vanislestudio 6 ай бұрын

Glad you think so and thanks so much for checking out the build!

@theabombination1 2 ай бұрын

Great build, I had been thinking of something similar except using the threaded rod as droppers, but I think I prefer the way you've used them! Thanks!

@vanislestudio 2 ай бұрын

Looks like we have been on a similar thought then! thanks so much for looking at my video and for your comment :) Cheers

@pinnacleservices6671 6 ай бұрын

You’re extremely talented. Thank you for the build. I would love to have something like this one day.

@vanislestudio 6 ай бұрын

Thanks so much and You can do it! Cheers

@FranksDIY 2 ай бұрын

Love the workbench . I'm forever changing mine to accommodate my growing needs lol.

@vanislestudio 2 ай бұрын

Hey Frank thanks for that! I probably am like you, I've already changed it to accommodate a Miter saw, and like you said, probably more changes as my needs grow. Cheers and thanks again

@TheBeechwoods 7 ай бұрын

One of the best builds I've ever seen. Well done.

@vanislestudio 7 ай бұрын

@TheBeechwoods thanks so much! You made my morning! and I appreciate you stopping in to leave your comment. Cheers Paul

@HowkeyLL 6 ай бұрын

Awesome build ! This is someting i want to have in a year or two .... will be looking forward for the plans from you" Thank you.

@vanislestudio 6 ай бұрын

Hey @HowkeyLL Thanks for that and for stopping in! I'm sure your workbench will come together for you! Keep goin!

@amwartwork 6 ай бұрын

as a guitar player of 20 years. i loved that stop block!!!!!

@vanislestudio 6 ай бұрын

Ha! You would know then! it came from left over parts from an old Gibson. Thanks for checking it out! Cheers

@ocamp4 18 күн бұрын

In addition to your great craftsmanship, your videography skills are on point!

@vanislestudio 11 күн бұрын

Hey thanks for that! Its been a steep learning curve for the video part for me but has been both frustrating and fun to learn lol. Thanks again Cheers

@michaelflikkema4149 2 ай бұрын

This is incredible. You leave your errors in there, and I identify with all of them because I’ve done the same damn thing. Pieces upside down, wrong side facing out, etc. I really like the T slot you routes in there, but if I were to do it I think I would just route out a slot for T track and that would open up some options, in my opinion. That’s just how my mind works. Incredible work, great job! 10/10 would watch again.

@vanislestudio 2 ай бұрын

Hi Michael thanks so much for that and nice to hear other people make mistakes like I do, so thanks for sharing that! Nice idea for a slot for the T -Track that you would do, I like it. Thanks again for stopping in and providing feedback, I really appreciate that! Cheers Paul

@voganlanway 4 ай бұрын

This is probably the cleanest build I've ever seen. Such precision and great craftsmanship! Definitely inspiring

@Agentlowe 4 ай бұрын

I read this comment before I pressed play, and I didn't really believe it when I read it, but 5 mins in. Im convinced. This is the cleanest build ive seen. Great job.

@vanislestudio 4 ай бұрын

Wow @Agentlowe that means a lot to me and thanks so much for that and for stopping in and checking out my build! Its much appreciated. Cheers Paul

@vanislestudio 4 ай бұрын

Hi @voganlanway are you sure you were watching my video? Lol :) Thanks so much for that bud and your comment means a lot to me!! Cheers and all the best, Paul

@brianshanahan3878 5 ай бұрын

THIS is one of the best videos I've ever seen on any subject!!! Your camera work, lighting and most of all, editing are UNREAL / AWESOME sir!!!!

@vanislestudio 4 ай бұрын

Wow @brianshanahan3878 are you sure you were watching my video :) That is so awesome for you to say and thanks SO MUCH for that it is much appreciated my friend. Cheers Paul

@pirakoXX 6 ай бұрын

Looks very sturdy and with so many fine details, like the four leveling corners! And the video is so well edited too! Thank you so much for all the info and inspiration from a new sub from Denmark; a 60 year old newbie woodworker, who looks forward to following this excellent woodworker/channel! /Pia

@vanislestudio 6 ай бұрын

Hey @pirakoXX all the way from Denmark ! Thanks for your encouraging comment! I appreciate you checking out the workbench build. I'm also excited for you and your woodworking journey! Paul

@NanaStillLearning 5 ай бұрын

This probably sounds ridiculous but this build brought tears to my eyes. So precise and beautiful. Last year I built a simple two tier workbench and it’s fine but man do I have a long way to go to being accurate in my cuts and don’t get me started on how unaware I was to my two car garage not being the level surface I assumed it would be. Definitely a novice. I love to watch woodworking videos and this one is exceptional.

@vanislestudio 5 ай бұрын

Hi @kathleengrehlinger4705 you are too kind :) Ang WAY TO GO for building your two tier workbench! a lot of people don't make it that far. I'm certainly no expert by any means, but I try to find ways to make life easier for myself, like the level floor to build on, or even as silly as making sure my saw is actually set up (meaning if I want a 90 degree cut, I get a 90 degree cut), not 89.5. It makes a difference when assembling a large piece : ) Thanks so much for your gracious comment Kathleen and here's to keep on learning! Chees Paul

@leochngyh 6 ай бұрын

Clean build and I really like the detail and works you put in to make everything perfect. Subscribed.

@vanislestudio 6 ай бұрын

So awesome thanks for the Subscribe!! And thanks for your comment @leochngyh! Best Paul

@Bekim8310 5 ай бұрын

Thats the most beautiful assembly table I’ve ever seen! I love all that detail and precision. My hat’s off to you, great build!

@vanislestudio 5 ай бұрын

Hi @Bekim8310 Thanks so much! I appreciate you checking out the build! Cheers Paul

@DudeOfTheWeek 3 ай бұрын

Wow! This was incredible! All from the skills to the amazing videography and fun ideas like the screws dancing - must have taken a while stopmotioning that segment.

@vanislestudio 2 ай бұрын

Hey Dude thanks for that!! Yup, those dancing screws consumed a week of my time Doh! Now I know how video stop motion, so hopefully it wont take near as long on the next one. :) Cheers and Thanks Again!

@woodmaster21 Ай бұрын

reallly good work , perfect designed ! It should be an example for all others

@vanislestudio Ай бұрын

You are too kind but thank you and I'm glad you enjoy the design! Cheers

@gamerscircle 6 ай бұрын

I have watched this about 3 times, your leveling idea is something that I would like to try, looking forward to the plans.

@vanislestudio 6 ай бұрын

Hey @gamerscircle that's so awesome of you to say. I appreciate you checking out the build. If you are still interested I hope to have them completed shortly. Best Paul

@vanislestudio 6 ай бұрын

Hi. Thanks again for inquiring about plans for the workbench. In case you are still interested, I wanted to let you know they are now available on ETSY. Here's the link bit.ly/3s4D7Ta The plans utilize imperial measurements, and use regular sized 2X4's (3.5 inch X 1.5 inch). And in case you are interested in building the workbench using the exact dimensional lumber I used in the video (3 5/8 inch X 1 13/16 inch) I'll have those plans available on ETSY on Oct 31. Thanks again for checking out the build! Cheers Paul

@gamerscircle 6 ай бұрын

@@vanislestudio Thanks Paul! I am no where near your level of wood working, I am most impressed with you leveling system. When I am ready for a master workbench, I will get your plans, again thanks!

@vanislestudio 6 ай бұрын

@@gamerscircle I’m sure you can make a straight cut my friend :) But thanks again for your comments! Much appreciated Cheers

@maikoo25 6 ай бұрын

wow, the amount of time that must have taken to even plan this out in sketchup, set up cameras, editing all of this AND a good looking table at the end. simply great

@vanislestudio 6 ай бұрын

Hey @maikoo25 I love your comment! Thanks a lot for that, made my Halloween eve here in BC Canada. Cheers! Paul

@philipingram5858 3 ай бұрын

I'm not yet a woodworker, but this build was really inspirational and awesome to watch. Well done!

@vanislestudio 2 ай бұрын

Hi Philip thank you for your kind words, they mean a lot! You mentioned "Not Yet" a woodworker... I would encourage you to try it. You may find you enjoy the saw dust and have fun building something :) Thanks again Cheers

@williamsethman2434 4 ай бұрын

Wow great looking table & work bench. Great details

@vanislestudio 4 ай бұрын

Thanks a lot for that! Glad you enjoyed the build cheers!

@DavidVossberg 6 ай бұрын

That was awesome. Great looking and useable bench and superb videography!

@vanislestudio 6 ай бұрын

Hi @DavidVossberg so awesome you think so and thanks for checking out the table build!! Cheers

@Pletharoe 7 сағат бұрын

Brilliant video and table design. Love it!

@toyotatacoma2021 3 ай бұрын

Nice bench table saw I like it. I wish build those bench one of this day.

@vanislestudio 3 ай бұрын

Thank you for your kind words and may your wished come true my friend!

@phalypso 6 ай бұрын

Best table saw cart design I have seen. Good work sir.

@vanislestudio 6 ай бұрын

Hi @phalypso Thanks so much for that! I appreciate your comment. Paul

@chipsterb4946 7 ай бұрын

That is a really neat design for the adjustable platform to hold the saw. You could have added a stretcher in front of and behind the shelf after you set its position; however, the bolts & washers in the t-track slots is a cool idea. 😎

@vanislestudio 7 ай бұрын

Hey @chipsterb4946 Thanks! I like your idea of an added stretcher in front of and behind the shelf too! Hmmmmm. Thanks for checking it out! Best Paul

@owenjones-wells9395 4 ай бұрын

I'm currently following the plans to build my version (not as long) of this bench for my single car garage workshop. I'm using this stretcher idea, as I don't have the tools to cut the T-slot in the legs.

@babyg6934 6 ай бұрын

Half laps R’ Us! What a great build and editing. Well done! 👍🏽

@vanislestudio 6 ай бұрын

Hey @babyg6934 right! A clean easy joint for sure! Thanks so much for your comment! cheers

@TheMooseHut 6 ай бұрын

It's a stunning build and fab video work. Looking forward to being able to get a set a plans.

@vanislestudio 6 ай бұрын

@TheMooseHut Thanks so much! The plans are taking me some time but I'm working on them every day. Hopefully not much long. Thanks a lot for your comment and checking out the build! Paul

@vanislestudio 6 ай бұрын

@cedricwilford 4 ай бұрын

Very cool build. Thanks for sharing!

@vanislestudio 4 ай бұрын

Hi Cedric thanks so much for that :) Means a lot to me as I learn how to make videos and share with everyone. All the best! Paul

@matthewfletcher6594 2 ай бұрын

Amazing! Very nice workbench. A new goal for me.

@vanislestudio 2 ай бұрын

Hey Matthew thank you for that! and I'm sure you would be able to build a nice workbench too! Cheers Paul

@MichaelGevedon 6 ай бұрын

Ive watched a lot of bench videosa and I must say this is definitely one of my top 3 so far. Great job. Im checking out your plans BTW

@vanislestudio 6 ай бұрын

Hey @MichaelGevedon that's something to hear it into your top three! Thanks a lot for that! and if your interested the plans will be done really soon. BIG Thanks again!!

@vanislestudio 6 ай бұрын

@patrickfee5065 Ай бұрын

Fantastic job...best bench ever..love the detail work!

@vanislestudio Ай бұрын

Hey Patrick Thanks bud. I appreciate that you noticed. It took longer than I expected but was fun and I learned a lot during this build. Thanks for stopping in, Cheers

@usethenoodle 4 ай бұрын

Beautiful job on the table and your video production. Bravo!!!!

@vanislestudio 4 ай бұрын

Thank you so much @usethenoodle! That's a great name Craig! and cool channel you have. I enjoyed reading how you learned a lot from how to videos, and you give back by doing the same making videos :) So Awesome Craig! Cheers Mate Paul

@ichiro1717 6 ай бұрын

Amazing build! Enjoyed watching this a lot! Looking forward to more videos!

@vanislestudio 6 ай бұрын

Glad you enjoyed the build and thanks so much for checking out the video! Cheers! Paul

@aramvanbergen4489 3 ай бұрын

You have some serious skills, hope you make more videos!

@vanislestudio 3 ай бұрын

Hi @aramvanbergen4489s thanks my friend, It's a learning curve for me for sure, and I am working on another video so I really liked that you hoped I was making more, Thats awesome! Cheers Paul

@arosado6604 6 ай бұрын

Nice and neat work, Thanks. Will be visiting for the plans.👍👍👍

@vanislestudio 6 ай бұрын

Hey @arosado6604 Thanks for your comment its much appreciated! Hope you come back soon. Paul

@vanislestudio 6 ай бұрын

Hi. Thanks again for inquiring about plans for the workbench. In case you were still interested, I wanted to let you know they are now available on ETSY. Here's the link bit.ly/3s4D7Ta The plans utilize imperial measurements, and use regular sized 2X4's (3.5 inch X 1.5 inch). If you are interested in building the workbench using the exact dimensional lumber I used in the video (3 5/8 inch X 1 13/16 inch) I'll have those plans available on ETSY's site on Oct 31. Thanks again for checking out the build! Cheers Paul

@wql1 6 ай бұрын

Great build! Thank you for sharing!

@vanislestudio 6 ай бұрын

@wql1 Glad you think so and its my Pleasure!

@LesTutosdeHuito 2 ай бұрын

great workbench and awesome editing!

@vanislestudio 2 ай бұрын

Thanks for your feedback Les, I'm glad you enjoyed the editing and the workbench. Cheers bud!

@pollypowell3907 Ай бұрын

Great video! Would love to see you do a piece on all the tips and tricks with your speed squares. Thank you!

@vanislestudio Ай бұрын

Hi Polly thanks so much! and I never thought about that! Tips and Tricks for speed square. I think that is a fantastic idea and I can see doing a short video on it. I greatly appreciate your suggestion. Cheers Paul

@jimrosson6702 5 ай бұрын

Looks great been looking for plans for a workbench with a Dewalt job site table saw in it love your idea of the height Amusment in it .

@vanislestudio 5 ай бұрын

Thanks so much Jim! Glad you enjoyed the design! Cheers Paul

@mandatoryfun_ 5 ай бұрын

great table and great production quality video as well. hope to see more and your channel grows!

@vanislestudio 5 ай бұрын

Hi @larseuscheltom thanks so much for that! I’m glad you enjoyed the build and the video! Cheers Paul

@simonelliott1146 6 ай бұрын

Very nice piece of work. Well crafted & looks really sturdy. Great job with the adjustable saw. Looks like I’ll be taking a leave out of your book.

@vanislestudio 6 ай бұрын

Hey @simonelliott1146 thanks so much for that and for leaving a comment! KZfaq is so great for sharing ideas! Best Paul

@jeremyswanson1108 4 ай бұрын

Great job editing. Nice work!

@vanislestudio 4 ай бұрын

Thanks so much for that @jeremyswanson1108! Cheers

@newt2010 Ай бұрын

Great video and awesome table that I would also love to have. Brilliant editing work. Especially the special effects of raising and lowering the table with servo motor sounds. Just brilliant and earned my subscription. Cheers.

@vanislestudio Ай бұрын

Thank you so much for the feedback! I really appreciate your comments as they mean a lot to me and I'm glad you enjoyed it. Best regards Paul

@spi-fi_media 7 ай бұрын

Awesome my guy! Looking forward to making my next desk and updating the shop next year. I find a lot of inspiration with your videos, and you make it look so easy and accessible. Even your mistakes are good!

@vanislestudio 7 ай бұрын

Thanks for that Dave! And I'm excited for your desk build and shop update, those are great projects buddy. Mistakes, I make a lot of them ahahah. Appreciate you stopping in!

@davidbruce3633 6 ай бұрын

Great build ! Love the editing & Easter eggs🥸 !

@vanislestudio 6 ай бұрын

Hey@davidbruce3633 Easter eggs! ahahah Yup they were just waiting to be discovered. Oh boy. Thanks a lot!

@bun9000 Ай бұрын

Thisis _such_ a clean build!!! I've been hunting for a design for weeks - 100% buying your plans on etsy right now. Ty! :D

@vanislestudio Ай бұрын

Hi thank you so much for that and for even considering my workbench for your project! If you have any questions please let me know and I''ll do my best to help :) Cheers Paul

@ashokponnappan8914 7 ай бұрын

Some of the ways u used the speed square was very new to me, even after seeing millions of maker videos on KZfaq. Thanks for those ! Edit 1: i wrote this comment before fully seeing the cinematic masterpiece that is this video. This is entertaining on so many levels!! Edit 2 : adding this comment to remind myself that I subbed to your channel when u had just 4 videos and 500 subscribers 🎉 let's gooo

@vanislestudio 7 ай бұрын

Hey @ashokponnappan8914 Thanks so much for checking out the build!! I really appreciate your comments and I'm happy you found it entertaining! Thanks a lot Paul

@zelbautista7363 6 ай бұрын

Nice❤❤❤

@billyweston949 4 ай бұрын

Awesome very clean build with perfection sir

@vanislestudio 4 ай бұрын

Hey @billyweston949 Thanks so much brother! I appreciate your comment and thanks for checking out my video! All the best :)

@jamesyan9436 6 ай бұрын

wow, fantastic job on the table itself as well as the video production, well done!

@vanislestudio 6 ай бұрын

Hey Thanks a lot for that @jamesyan943! Makes me smile that you enjoyed the build! Cheers

@ChrisJMoreno Ай бұрын

Cool. Your skills with both the build and video are superb.

@vanislestudio 27 күн бұрын

Hi Chris that's kind of you to say! and thanks for that. I've learned a bunch since then and looking forward to sharing my new video with you soon. Cheers

@pathardage1880 5 ай бұрын

Terrific build. Gave me some good ideas. Thanks.

@vanislestudio 5 ай бұрын

Glad to hear it @pathardage1880 ! Cheers

@mickydl66 6 ай бұрын

WOW well done, a good inspiration for my new project. Thanks Micky (from Italy)

@vanislestudio 6 ай бұрын

Hey Micky from Italy!! My sister in law is Italian, and I LOVE ITALY!!! what a beautiful country you live in! Thanks for stopping in and checking out the build. Cheers Paul

@briankennedy9439 6 ай бұрын

Excellent build! Can't wait for the plans. Subscribed.

@vanislestudio 6 ай бұрын

Hey @briankennedy you and me both. Im looking forward to completing them too! Then I can get back to the shop lol. Thanks for checking out the video! Cheers

@vanislestudio 6 ай бұрын

@thewestendwoodworker Ай бұрын

Beautiful work.

@vanislestudio Ай бұрын

Hi there I suppose it's just a workbench, but I do enjoy working on it and thank you for seeing some beauty in it! Much appreciated. Cheers

@RedlineRossi 4 ай бұрын

WOW!! The skill level in ALL departments of this video are off the chart. I thought this guy must have at least a million subs. But no, at this moment in time 4.4k subs. I am shocked!! Well, you gained a new sub. AMAZING!!!!

@vanislestudio 4 ай бұрын

Hey @RedlineRossi A million subs?? Are you sure you watched my video lol. Thanks a lot for that and it made my morning to read : ) Cheers Rossi, Paul

@randallmcdaniel1189 6 ай бұрын

Well done from the build to the editing which made this video a pleasure to watch. Subscribed

@vanislestudio 6 ай бұрын

Hey @randallmcdaniel1189 so awesome you enjoyed the watch! Thanks for letting me know and for your comment!

@mredd321 2 ай бұрын

Great build !! clean and precise craftsmanship........👏I want something like this for my shop, but with a facility for a miter saw, as my shop space is limited. Love your work.

@vanislestudio 2 ай бұрын

Hey Mr Red thank you for your comment! I don't really consider myself a craftsman, so it's nice to hear you say that! And that's a good idea about a facility for a miter saw. I am currently in the process of redesigning my workbench to include a miter saw that rotates. I hope to have it completed in a few months time with a new video. Thanks again for your comments. Cheers Paul

@bilbothejust 5 ай бұрын

Awesome table saw workbench!

@vanislestudio 5 ай бұрын

Thanks for saying that @bilbothejust! I appreciate you checking out my video. Cheers

@bilbothejust 5 ай бұрын

@@vanislestudio I just bought the DWE7491 and was wondering wghat to do with the cart? Also why can’t you buy the saw without the cart!?

@vanislestudio 5 ай бұрын

@@bilbothejust Great saw BTW! And that's a good question! My cart is just taking up room in the shop. I've been avoiding dealing with it. I'm keeping it thought, I may need it on site somewhere? But do not see that happening anytime soon. Cheers !

@claudecirschatz8646 6 ай бұрын

Bom dia, foi a melhor mesa de bancada que eu pesquisei! Parabéns, você me inpirou a fazer uma para minha Dewalt, parabéns.

@vanislestudio 6 ай бұрын

Hi @claudecirschatz8646 that's awesome! Thanks so much for letting me know and I'm sure your workbench will turn out amazing! Cheers Paul

@djsmootht6825 6 ай бұрын

Your craftsmanship and attention to details is like no other! Thanks for the video!

@vanislestudio 6 ай бұрын

Hey @djsmootht6825 you are too kind! Thanks for that and it's awesome you checkout out my video. Cheers Paul

@myshinobi1987 2 ай бұрын

I have that Bosch mitre saw and it's an amazing piece of kit

@vanislestudio 2 ай бұрын

Hey Myshinobi! I like your name! The Bosch is a BEAST! I particularly like how close it can sit to the wall. For a large saw, its foot print it surprisingly small. You have a good taste in a quality saw my friend! Cheers and thanks for stopping in

@myshinobi1987 2 ай бұрын

@@vanislestudio thanks guy. I've had that saw for a couple of years now. I've built a lot of stuff with it. I recently got 12" a Diablo Steel Demon blade. Apparently they can cut through plate steel... we'll see. You are right though, it's a great saw for so many reasons. I initially thought that it wouldn't be as accurate as the traditional rail technology buvt I was absolutely wrong. A great example of German precision engineering and technology.

@user-tn3gx3uv6g 6 ай бұрын

Very cool, painstaking work done. Master of his craft! Greetings from Russia

@vanislestudio 6 ай бұрын

Hey Russia! So awesome to hear from your side of the world!! Thanks a lot for checking it out!

@dave5185 3 ай бұрын

Great video. One alternative to a fancy adjustable height base for the saw is to just build the base a bit lower and use blocks to raise the table saw to the right height. If you buy a new saw, you simply need to replace the 4 blocks under the table saw.

@vanislestudio 3 ай бұрын

Hey Dave that's great advice and thanks for stopping in with your comment. I enjoy learning new things and thought why not try something a bit different. Thanks again Cheers

@coolabahwoodworking 6 ай бұрын

Well done! Great voice over too! Love the idea with the adjustable table

@vanislestudio 6 ай бұрын

Hey @coolabahwoodworking Thanks for checking out my table saw build and I appreciate your time for your comments! I'm new to doing the voice over, it takes me a long time, (but getting faster at it) and glad you enjoyed it! Best Paul

@omri3753 6 ай бұрын

11:48 was a great moment. Great build!

@vanislestudio 6 ай бұрын

Thanks so much! Cheers :)

@robinulmer1857 5 ай бұрын

Very good looking bench and nice editing!

@vanislestudio 5 ай бұрын

Hey @robinulmer1857 thanks for stopping in and checking out the build! Cheers !

@JulienMelissas 4 ай бұрын

The attention to detail is impressive, thanks for showing us all how it's done!

@vanislestudio 3 ай бұрын

Hey @JulienMelissas thanks so much bud Cheers!

@slingard 6 ай бұрын

Fantastic build video, the animations (and sound effects) are really well done as well! Look fwd to the plans! 🎉

@vanislestudio 6 ай бұрын

Hey @slingard thanks so much for checking it out! it was fun for me, and educational to create! I hope to have them done soon. Best Paul

@vanislestudio 6 ай бұрын

@zaffman 4 ай бұрын

Very good idea for the table leveling. I have to reset mine to the proper height, this idea would have made it a lot easier

@vanislestudio 4 ай бұрын

Hi @zaffman even if you have to reset yours to the proper height, I'm sure it still does the job well :) Thanks so much for checking out my video mate, Cheers Paul

@southerndime333 Ай бұрын

love the whiskers

@vanislestudio 27 күн бұрын

Ha! Thanks and that, made me smile. I never had those "whiskers" until a couple years ago, they have gown on me... no pun intended lol Cheers and thanks for stopping in!

@NitaTechnologies 6 ай бұрын

very nice build - looking forward for the plans

@vanislestudio 6 ай бұрын

Hey @NitaTechnologies me too! I'm looking forward to completing them so I can get back to my shop lol. Thanks a lot for your comment and for stopping in!

@vanislestudio 6 ай бұрын

@NitaTechnologies 6 ай бұрын

Awesome-thank you just purchased, can't wait to build @@vanislestudio

@vanislestudio 6 ай бұрын

@@NitaTechnologies Awesome! I'm excited for your build! Keep in touch if there is anything you need! Cheers

@abad_gtr1123 6 ай бұрын

awesome workbench build! very stout and fit the saw nicely. i have the same Dewalt....would love to build something like this for it someday i just don't have the room right now.

@vanislestudio 6 ай бұрын

Hey @abad_gtr1123 thanks so much and hopefully one day :) Cheers!

@1943Fletcher 6 ай бұрын

Excellent workmanship.

@vanislestudio 6 ай бұрын

Hey @1943Fletcher So awesome you think so and thanks a lot for checking out the build Cheers!

@williamdoyle649 6 ай бұрын

Great build! I'm a Vereshchak fan also.

@vanislestudio 6 ай бұрын

Hey @williamdoyle649 big Vereshchak fan here! Awesome! Thanks a lot for your comment

@joseedinaldo3672 4 ай бұрын

Caramba!!! É muita precisão... Parabéns

@vanislestudio 4 ай бұрын

Hi @joseedinaldo3672 thanks so much for that! I'm glad you enjoyed the build video. Chess from Canada

@lolotrix 6 ай бұрын

Hace dos años que construí mi banco de trabajo, muy parecido al tuyo. Me emborrache de videos.. que pena no haber visto el tuyo, me hubiera salido mejor, pero me ha dado ideas sobre todo para la mesa de sierra que quiero algo parecido. Felicidades por el nivel de trabajo muy alto!! y el video.. aquí tienes un admirador...

@vanislestudio 6 ай бұрын

Hi @lolotrix I wonder how my table will be after two years of working on it like you have! I also looked at very many workbenches before building mine. I do like how the leveling saw table worked out. Glad if gave you some ideas! Isn't KZfaq great for that! We all learn. Many Thanks for looking at the video! Best Paul

@alancongratssoonyoullhead5273 5 ай бұрын

Amazing job, loved it 👍🏼

@vanislestudio 5 ай бұрын

Hey @alancongratssoonyoullhead5273 Thanks so much! Cool Channel name BTW :) Cheers

@98nchen 6 ай бұрын

i got those casters too. they're pretty sturdy and nice. although the table i attached to it wasnt made too well lol. not much i can do with home depot wood and no experience

@vanislestudio 6 ай бұрын

Hey @98nchen right! They are built like a tank! Definitely outlive me. Funny...I'm working on making plans for the Home Depo Lumber (3.5 X 1.5). You just have to pick through the piles to find the straight ones and you're good to go! Just keep at it! Thanks for stopping in! Cheers

@trtingus 2 ай бұрын

Seriously nice work. Do more.

@vanislestudio 2 ай бұрын

You comment is very encouraging for me! Thanks so much for that. I have another video out in a month or so, that I'm really excited to share with you. Thanks again, Cheers