DIY Tubing Notcher Kit
Рет қаралды 38,984
2 жыл бұрынToday we show off Centurial's new DIY Tubing Notcher Kit. This kit allows you to use Harbor Freight tools to efficiently notch pipe or tubing. You will need to weld a small amount and you will be notching in no time. Check out the links below!!!
Centurial Discount Code - REDBEARD5
DIY Notcher Stand Kit - bit.ly/3uzEJT7
Drill Press - bit.ly/3yoGkw1
Tube Notcher - bit.ly/3yunG5Q
Hole Saw Bit Set - bit.ly/3PhnZIe
Merch & Events - bit.ly/33YbmtO
Check Out Go Power Sports for all your Go kart needs! bit.ly/2viX9vP
Parts & Tools used on the channel - amazon.com/shop/redbeardsgarage
Quantum Machinery- Siegmund Welding Table - bit.ly/36PHm6G
- Nargesa CC60 Bender - bit.ly/2xWDVxj
Prime Weld Tig 225x - amzn.to/3L4U3MG
Prime Weld MIG180- amzn.to/3KVUPvn
Benchmark Abrasives (cut-off wheels, flap discs..) bit.ly/2SENg4f save 10% REDBEARD10
Tube Buddy Affiliate- www.Tubebuddy.com/RBG
Help support us on Patreon - patreon.com/redbeardsgarage
Want to donate without the commitment? - paypal.me/redbeardsgarage
Want to send us something?
Red Beard's Garage
P.O. Box 572
Sweetwater, TN 37874
Facebook - redbeardsgarage
Instagram - redbeardsgarage
TikTok - redbeardsgarage0
Pinterest - redbeardsgarage
Twitter - redbeardsgarage
Instrumentals by Chuki Beats - / chukibeats
-------------------------------------------------------------------------------------------------------------
*********Disclaimer*********
Please do not try to re-enact or recreate anything you see in these videos. We are trained professionals. Red Beards Garage does not take any responsibility for injury's created by doing so.
#RBGKarts #RedBeardsGarage
@centurialinc 2 жыл бұрын
Awesome video. We don't like the handle on the post as well and mods for this kit are in the works. The first mods would be a new low pro handle, a thread adapter for smaller hole saws, ball bearing replacement guide and a more robust clamp. Next year this kit should be a beast! All good things take time. Keep it up man.
@RedBeardsGarage 2 жыл бұрын
What do you think of this setup? Back to normal content on Monday!
@eastsliders_drift_trikes_nz 2 жыл бұрын
shim the holder off the base to centre it bro. just bought the same notcher.......enjoyed the tutorial. thanks!!
@gavincline209 2 жыл бұрын
Instead of grinding on the V part. Shim up the arbor holder. With the amount of adjustment you have to move the entire notcher assembly up/down on the stand bracket, you should not have an alignment problem with the drill press. Since the drill press can rotate also it will work, just have to fiddle with it like before to get everything lined back up. Make it a big flat washer the size of the metal bearing holder and it will be just as strong as original and not just a small surface area of the washers taking all the forces applied to it.
@eladvanallen8282 2 жыл бұрын
Just a few washers under that brace bracket should center it up.
@joshblainer2652 2 жыл бұрын
had to do that to mine. works great since I did it
@DustinApple 2 жыл бұрын
im literally screaming at my phone... "Just Shim the Hold down clamp!" lol
@haroldbarrows8483 Жыл бұрын
I did exactly the same thing with mine 😂
@blakedreyer7424 Жыл бұрын
@@DustinApple same lol
@gariya8113 Жыл бұрын
Same here lol
@shawnbassplayer 2 жыл бұрын
Washers or a spacer plate under the clamp will center it. You could also make different thickness clamp spacers to offset the pipe further for different offset cuts.
@jamesmccormick2696 2 жыл бұрын
This is exactly how I centered mine. It was off by .050
@stretchedbmx 2 жыл бұрын
Mines the same. I just shimmed it with washers until it was centered
@faragmostafa633 Жыл бұрын
This press has worked like a charm for my projects kzfaq.infoUgkxajoEbapTfqWaadnqb04h6U576yxXp-FE . I didn't even secure it to my table top, mainly due to the fact that I was using a 15 lbs drill vise. It's not flimsy at all as to what others have claimed it to be. Make sure the locking nuts and levers are secured and there won't be any issues with light pressure and patience. I was able to drill through aluminum, plastic, and steel (steel took a while) with no problems at all. Yeah it took a little longer than a regular drill press, but I don't have the space OR the money for one.The instruction manual was worthless, but luckily assembling the press was intuitive. However, the manual would be good for ordering replacement parts if needed. There is a nice breakdown of the parts that are included in the kit. Before ordering, make sure it is compatible with your unit, it is clearly stated what models the press is compatible with.This was an excellent purchase for $40!!
@bigbaby1177 2 жыл бұрын
Really like this kit. One of those things you think to yourself " Why didn't I think of that?"
@OGTtom 2 жыл бұрын
Greg that is a great set-up , thanks for sharing .
@tennesseedave316 2 жыл бұрын
I love the set-up... It looks to be steady and true. Well, once you get it dialed in. Keep up the great content.
@samsgarage1716 2 жыл бұрын
You have all the good tools Red beard.I also like the fact that you actually read your comments unlike the other guys who I’m not going to mention.Keep up the great work.
@gmanchurch 2 жыл бұрын
Thanks so very much for sharing that with us Red Beard’s Garage! Been enjoying your videos and please keep ‘em coming!
@YerkitRacingChannel 2 жыл бұрын
Notcher looks awesome! I could use one of these for my shop for sure!
@1979augistine 2 жыл бұрын
Excellent piece of equipment
@JohnJohn-rl3sw 2 жыл бұрын
Put some washers under the black V that holds the pipe to raise it up
@summitdave8782 2 жыл бұрын
Awesome...Fun times.. Very slick ....
@rcclassiccrawlers4368 2 жыл бұрын
Not a bad looking setup at all. I’m considering going with that very same setup.
@donaldhalls2189 2 жыл бұрын
Looks like it should work very well, all the best to yous and your loved ones
@lloydbaker7099 2 жыл бұрын
Nice looking setup
@mohammadnoormauludadnan1847 2 жыл бұрын
Thanks for sharing. Useful build.
@dirtfootracing8788 2 жыл бұрын
interesting setup ....hanging on to a drill motor can get dicey
@randytravis3998 2 жыл бұрын
great looking setup .. only thing I would do it oil the hole saw bit would save a bit of life in the cutting another tool they could add too that set up would be a extra leg like a tripod to hold up a long pipe if you have no friends to hold it ,, talking like a 4 ft or longer pipe the weight could tip the unit over or put stress on the unit would need to test it to know for sure ..thanks for the Video Red Beard ,,
@phillipchambers8487 5 ай бұрын
Great Video! I will definitely be building one of these. So much safer than using a Hand Drill
@hichemouerghi6917 Жыл бұрын
Bravissimo 👏 ❤
@NotMeeither 2 жыл бұрын
You can shim it to get it centered
@teamfrankenmerc 2 жыл бұрын
It’s the weight of the pipe pulling down the end of the pipe. A small roller to hold the other end of pipe will take care of height. Just try out
@robertsimpson6096 2 жыл бұрын
i like that notcher,, lots
@docfischer7291 2 жыл бұрын
I had to e same issue with my notcher. I shimmed it with paper under the tube holding bracket until it centered . If the notcher is cutting too high you could elongate the holes to the mount for it to raise .
@TyphoidSnaily Жыл бұрын
You can fix the offset notch by making a sheet metal shim for the tube jack.
@davidowen888 2 жыл бұрын
Gee Mister That's A Mighty Fine Notcher 👍☮️
@kenjohnson5498 2 жыл бұрын
I think that drill press needs a stage 2 tillitson lol
@DatBoiOrly 2 жыл бұрын
14:08 get some thin washers and shim it up ;)
@FishinBuddy 2 жыл бұрын
Those are neat but I wouldn't trade my notch master for 10 of them.
@rtz549 Жыл бұрын
The current model pipe notcher as shown in this video is built a lot better then the old model.
@Rad.Dad.Customs 2 жыл бұрын
For the ones who have used many different hole saws the Hercules hole saws are a awesome deal. They appear to be the closest thing out that compares to the Milwaukee ones and the Milwaukee ones are the best ones out in my opinion. But the Milwaukee ones are rather pricey.
@tpc-7175 2 жыл бұрын
I love my Milwaukee hole dozers, now I think I need to add this setup to my arsenal
@bowlweevil4161 Жыл бұрын
I cut 2 3/8" holes in 1/2" plate with lennox bi metal hole saw that I have had for 10-12 years and it's still cutting, 250 rpm and dark pipe threading oil good vid thanx
@megoingfast 2 жыл бұрын
I've got that drill press set up as a drill press normally, modified the same notcher to make it work. It needs a few mods on both to make them not bad. It's all about the hole saws themselves. Belt speed is one step on primary from stock. Stock belt catches too much, no torque.
@dannyl5471 Жыл бұрын
Badass!
@paulhopkins1905 2 жыл бұрын
Sure it's adjustable. A couple shims under the vise and you're golden
@paulbrouwer7559 Жыл бұрын
If you shim under the vice you can even that notch up.
@jamesbryant7355 2 жыл бұрын
All it needs Is a small oiler and catch basin and it would be perfect never have to spray the bit.
@brianrhubbard 2 жыл бұрын
I had the same issue with my notcher. Tractor Supply has really thin sheet metal you could use as shim stock under the vise. But it is still aggravating to have to deal with.
@JKT_bonsai 8 ай бұрын
❤tanks info nya
@JohnWheels 2 жыл бұрын
I put a grease zerk on the bushing block to pack that bushing area full of grease so it lasts longer.
@beotch22utube 2 ай бұрын
It's all you have to do is grind one side of the v that holds the tube to fix that offset.
@newt2010 11 ай бұрын
You should have put a sim plate under the v notch clamp. Seen others here on YT that have done that, and the notches are spot on equal. Easily done. The trace the clamp base, and drill through holes. This is an edit. I wrote the first part before you mentioned it. Cheers
@kwatt-engineer796 2 жыл бұрын
I can see that the drill press spindle/chuck compensates for the clearance of the shaft on the HF notcher , very impressive setup. I want one! I already have the HF notcher. All I need is the drill press and the kit. Thanks for the info . As always your channel is a Pipeline to great tech for the hobby. If you think it fits the purposes of your channel, it would be helpful to unravel the compatibility of the various components used in the karts, like 150, 200, 250, 300 cc etc. I am currently fabricating spindles to fit hubs with brake disks from a 150 cc kart. Do the spindle sizes and brakes change as the cc size gets larger? I haven't found data on this any where.
@Johnnyreengo Жыл бұрын
Add vertical adjustment and I’ll buy it
@podgoespop 2 жыл бұрын
the bolts are for your hight ajust on the plate
@notimegarage8632 2 жыл бұрын
Widen that U clap and put a thread rod Y axis so you can move the V clap up and down
@stanlucas665 2 жыл бұрын
Great tool idea to use the belt driven drill press so the very little chance of drill motor kick back
@anarchyordie756 2 жыл бұрын
Cut one side of the vee to raise or lower the centerline.
@johnrobinson4787 Жыл бұрын
you can shim your arbor with washers
@eibbionlaird 2 жыл бұрын
the two bolts that hold the block that drive mounts to... PUT A WASHER UNDER IT, lol. you space it up that way and center your cut...
@joemangini5171 2 жыл бұрын
Could you put washers under the tubing clamp to raise it?
@roypatterson9910 2 жыл бұрын
That's where your problem is, that's why it's cutting off like that, it's in the step where you mounted the pole with the gears to the stand, that bolt is not lined up properly, it's a single bolt, so you should be able to get it more level / straight. Like I said, look at it from the side, then you'll see that that the pipe with the gear isn't mounted level to the stand.
@roypatterson9910 2 жыл бұрын
If you look at that from the side, you'll notice that that's not sitting level, there's something you got wrong with the bolting or the way it's tightened. That's why it's cutting like that.
@jonathan7744 2 жыл бұрын
why not shim under the holder, it looks like it's bolted on to the plate.
@watahyahknow 2 жыл бұрын
for the original height adjustment of the drillpress : maibe you can rotate the part that bolts to the original drill table and have the ajustment on the under side , should be a little more out of the way , can mount a lathe style metal wheel on it so it adjust eazier from the side doesnt seem to be a need to adjust the drill press part though putting a cart steeringwheel in place of the 3 quill levers might make the setup eazier to operate
@Tarobub 2 жыл бұрын
What kind of torque converter would you recommend for predator engine ?
@000302lf 2 жыл бұрын
I don't know if this is the place to ask a question but I'm going to put a Predator 459 on a golf cart. I went to a wrecking yard for golf carts and bought a gas transaxle with reverse as the cart I got was electric. Paid way to much but I guess they are expensive so now I need a drive clutch which one would you recommend? I found a 1 Inch bore but i'm a bit skeptical about using a taper adapter to fit the clutch to the shaft. Is there a better way? Thanks so much subscriber Larry Frazier.
@whowhatisthat88 2 жыл бұрын
Washers or old shims could be a cheep ish fix
@weseethetruth158 Жыл бұрын
Washers under the clamp bed fixes the offset.
@timbloom7662 2 жыл бұрын
SIC!!👍🏿👍🏿😮😮
@Tarobub 2 жыл бұрын
What kind of flywheel would you recommend for predator engine ?
@js2music231 2 жыл бұрын
Can you just put some washer under the bolts that hold the tube to make it Center?
@user-ck1gk6xu5n 6 ай бұрын
I would like to know where did you get the plate to mount the drill press on
@bryansimon3206 2 жыл бұрын
Well yeah,shim it up dood
@bigtsperspective5831 2 жыл бұрын
Don’t fool yourself Greg ! We watch this stuff on other channels or copied later by others. I’m not the only guy thinking ,What would Ol’ Red Beard do ? Tool builds are cooler than beans on Saturday. Every guy that builds this probably just gonna buy the stuff you recommend 😉.
@user-qn5wk4wi9c Жыл бұрын
👍
@erichill5208 Жыл бұрын
Interesting idea. Y’all should check out rogue fab versa notcher
@jessesgarage6232 2 жыл бұрын
Nice to c a notcher for a broke fool like me lol
@lukemears9171 2 жыл бұрын
I had to shim my notcher a bit. Then got about 6 uses and the bushings shot craps
@centurialinc 2 жыл бұрын
We are working on a replacement for that. Also grease and good alignment help to keep it going longer. Did you try replacing the bussing?
@juniorbeginnerbeginner1790 2 жыл бұрын
My harbor freight tubing notcher starts the cut and the bushing got like 2cuts then it doesn't drill center wow
@centurialinc 2 жыл бұрын
@@juniorbeginnerbeginner1790 We are working on an upgrade for that. so far ours is still going. Did you use any oil or grease on it?
@bluegizmo1983 Жыл бұрын
Maybe a dumb question, but why would you want to mount the drill press sideways for notching tube vs just keeping it setup and a normal drill press and use the notcher with it vertically?
@Shiryas Жыл бұрын
Any updates? Things you would change? Modifications?
@MultiBandit2011 Жыл бұрын
What’s the size of the mounting plate
@digger_jon2778 10 ай бұрын
The versa notcher is way more flexible from rogue fabrication and I believe th price Is about the same
@bucktoyota 5 ай бұрын
First time ive ever heard holesaws called bits 😅
@lostinthesoup8562 2 жыл бұрын
Could I send you a 18hp duronmax motor to you with a 💩 load of upgrades and could you build it up for me? I would pay you obviously. Or better yet if you have one already and I could buy a motor off you? I want one for a drift trike with a side cart I attacted for my kids.. Need something with little power tho. For 2 ppl you know.. it's not much more weight there 80 pounds wet. That would be awesome if we could make something happen man. Love your channel man keep up the great work.
@matthewgreeson2109 2 жыл бұрын
All you got to do is put some washers under the clamp
@christopherallen9615 2 жыл бұрын
Washers?
@googleyoutubechannel8554 4 ай бұрын
Or... or... you could just use your drill press like normal and you know, the regular drill press vice?
@mconfluence 2 жыл бұрын
Why don't you add a shim under it
@ronwhittaker6317 2 жыл бұрын
14:10 just make different thickness plates bubby.
@biglon62 2 жыл бұрын
I must be a real loser have no friends to help!😂
@SurlyMike 2 жыл бұрын
You can build a better tube clamp then that one is.
@OscarMartinez-js1it 2 жыл бұрын
Where the 999cc go kart red beard
@bugbugbuggy650cc5 2 жыл бұрын
Hello, I always look at your posts, I also have a buggy in which I put a 650 rotax engine of Aprilia Pegasos. KZfaq channel I have several videos called buggy 250
@nati682 2 жыл бұрын
👍💪🇦🇩🇦🇩🇦🇩🇦🇩
@mylife-bz4zg 2 жыл бұрын
I think I'd just keep using your own built one, why try a few fix something that's not broken?
@ASMROFYOUTUBE 4 ай бұрын
Shim the holder
@lostinthesoup8562 2 жыл бұрын
Honestly now that I read community guidelines.. IDK if I can get you to help me if I asked or can you? You have a great channel I like your work so I want you to build a motor for me.. But I dont want KZfaq to violate you in any type of way shape or form. IDK GUESS LMK.. KEEP UP THE GREAT WORK REGARDLESS..
@juniorbeginnerbeginner1790 2 жыл бұрын
I bought that drill press junk couldn't even drill through metal with it
@RedBeardsGarage 2 жыл бұрын
Well I just cut through metal with it so maybe you didn't have it set up right.
@1979augistine 2 жыл бұрын
You need to learn to sharpen drill bits and you will ever have any issues like that ever again
@juniorbeginnerbeginner1790 2 жыл бұрын
Hey red you looking for anybody with some good fabrication skills 20 years of welding
@juniorbeginnerbeginner1790 2 жыл бұрын
They where brand knew kobolt bits
@ProbeGT2 2 жыл бұрын
Have you check belt tension?
@CODOutdoors 2 жыл бұрын
Stupid arbor!🤣
@James-on1vy 2 жыл бұрын
Take that notcher, and throw it in the garbage. You can do it faster by hand and just as accurate. That notcher is GARBAGE. If you're going to insist on a notcher, go to Rogue Fab and buy theirs.
Dugg Digs Adventure
Рет қаралды 2,3 М.
Top_sigma1
Рет қаралды 4,6 МЛН