DIY USB LOGITECH PEDAL ADAPTER

Рет қаралды 174,686

6 жыл бұрын

Make a DIY USB pedal adapter. Use Logitech pedals as standalone with any wheel base. An easy mod see the parts needed below. G29 G920
**** PARTS ****
Logitech pedals
DB9 plug ebay.us/epIgxM
Arduino Leo/Pro micro bit.ly/3SiYSa6
Wire bit.ly/3zRDeCt
Joystick Library bit.ly/2Hsl9BC
Sketch Amstudio Github - Adjust 5AXIS
**** TOOLS ****
Heat proof Mat bit.ly/3SonQ7Q
Cheap Soldering Iron bit.ly/3bmgyRK
Soldering Iron eBay ebay.us/gUIMh3
Solder bit.ly/3vxKbX6
Cutters bit.ly/3SxmM1Q
Wire Strippers goo.gl/4PFXny
Multi meter bit.ly/3Jom6HS
This site contains affiliate links for which I may be compensated
**** My Sim Setup ****
Drift/rally wheel eBay goo.gl/Yw6Zzh
Fanatec CSW 2.5 Wheel base
Fanatec F1 carbon, BMW, Universal Hub
Fanatec CS V3 Pedals (Logitech pedals in this vid)
Fanatec Handbrake V1.5
Fanatec H pattern + Sequential Shifter V1.5
Fanatec Rennsport V2 cockpit
Sparco Seat ebay.us/putCtx
Amstudio DIY Button BOX • MAKE THIS BUTTON BOX |...
**** Get Fanatec here ****
www.fanatec.com/?F...
Thank you for watching, all questions are welcome. Would like to see a project leave suggestions in the comments.
Share the video with a Friend who would like this.
AMSTUDIO channel for more SIM Mods and DIY projects.
/ @amstudioprojects
NOT FOR RESALE PERSONAL USE ONLY
This work is licensed under a Creative Commons Attribution-NonCommercial-NoDerivatives 4.0 International License.

Пікірлер: 392

@grizzly9960 5 жыл бұрын

Thank you! Now when do my next upgrade "a high quality ffb wheel" I can continue to use my pedals till I have the money for a better set of pedals. This is so easy to make as well.

@wastelandgoats 5 жыл бұрын

All i can say is you da man. Joystick Library is one of the best things out there. thanks for showing me this stuff DIY all the way

@Flashzinh0 3 жыл бұрын

Can you do this with the stock Joystick library our do you need to modify it ?

@mattinman8285 6 жыл бұрын

This is genius. There's nothing worse than having to run a cable down to the pedals from the wheel, and now I'll have the freedom to keep a USB cable tucked away down the back of the desk for easy setup!

@caballete0075 5 жыл бұрын

Matt Inman Need help! I have done everything, installed the g29 stack and calibrate the pedals with the windows software. All connections and downloads already done ✅. The thing is non of the games respond to the pedals. Can anybody give some light with this. PLEASE HELP!!!!

@Archetype123 5 жыл бұрын

Thank you! Just bought a CSL 2.5 base and McLaren GT3 wheel from Fanatec but can't splurge on the V3 pedals yet.

@zombie821 6 жыл бұрын

I build it today and it works great, thank you for that... next project is the rumble Pedals mod

@caballete0075 5 жыл бұрын

zombie82 Need help! I have done everything, installed the g29 stack and calibrate the pedals with the windows software. All connections and downloads already done ✅. The thing is non of the games respond to the pedals. Can anybody give some light with this. PLEASE HELP!!!!

@aliloukonoha3406 6 жыл бұрын

you are the best amstudio i love your diy and your explication you are juste amazing

@jerrylagerlund9487 6 жыл бұрын

I wonder is there a possibility to use the arduino board for this mod + mod the standard g25 shifter to run on the same board? This would be a great mod since I use a t300rs separately to my g25 wheel which is broken but the pedals and shifter work perfectly.

@keesanker4241 5 жыл бұрын

Could you maybe map the clutch and the throttle to one axis? I want to use the pedals for a flight simulator

@gonzalovagabculow7345 6 жыл бұрын

Have you felt any differences with this mod? Does it elevate de resolution of the pedals?

@estudiofotograficoediciony4963 4 жыл бұрын

Mil gracias por el tutorial, funciona de maravilla con la palanca G29

@juancho3399 2 жыл бұрын

Donde esta el SSketch de USB Pedal adapter ?

@mamad7976 5 жыл бұрын

2:52 nice rev match dude

@asaleminik 6 жыл бұрын

Love your tutorials dude. Are you a computer engineer by chance?

@RobotRogue 2 жыл бұрын

Bonus to using this board is you get 10 bits vs 8 bits, so a 4x multiplier on the resolution.

@MichalMonday 2 жыл бұрын

It maps a10-bit integer to 8-bit integer (whole number) anyway so there's no difference in resulution really (unless we send 10-bit value itself to PC, which seems to not be the case), please correct me if I'm wrong.

@TheMrskateTV 6 жыл бұрын

GREAT IDEIA

@B00h44 6 жыл бұрын

Now to program the Arduino to fix the pedals in place ... Some usb wire and wood screw might help them from sliding around

@ronim17 5 жыл бұрын

Nice Vídeo dude!!!! Works with G27 pedals?

@psykodiak5333 4 жыл бұрын

Dude, I love your shoes!

@cptcarot 4 жыл бұрын

That's great, Just great. Thanks

@jonah1120 6 жыл бұрын

Can you make a video on the shifter next

@arvincayetano6050 4 жыл бұрын

this is amazing, plsss make an independent steering wheel on your own

@madalinilinca 6 жыл бұрын

Nice work. I have one Logitech G27 dead( mainboard I guess) and I want to ask you if can be changed with some Arduino boards.

@giocondasalcedo2828 4 жыл бұрын

Awesome ! Where can we get the sketch ?

@CentrlMax 6 жыл бұрын

could you make one for the shifter please

@tomate0232 6 жыл бұрын

you could do another of the g29 shifter

@OldBuford 4 жыл бұрын

ill never use this (probably) but as always, great tutorial!

@mariohernandez5147 6 жыл бұрын

Thank you!

@caballete0075 5 жыл бұрын

Mario Hernandez Need help! I have done everything, installed the g29 stack and calibrate the pedals with the windows software. All connections and downloads already done ✅. The thing is non of the games respond to the pedals. Can anybody give some light with this. PLEASE HELP!!!!

@grahamemes7772 4 жыл бұрын

thanks for making this, but i dont have the logitech usb adapter sketch. do i need another program to run the arduino library?

@dESK02010 6 жыл бұрын

Very nice like ever, thanks a lot for your work. But, where is the sketch?

@dannyvdberg2717 6 жыл бұрын

PLEASE make the shifter adapter next

@caballete0075 5 жыл бұрын

Need help! I have done everything, installed the g29 stack and calibrate the pedals with the windows software. All connections and downloads already done ✅. The thing is non of the games respond to the pedals. Can anybody give some light with this. PLEASE HELP!!!!

@user-spv96x3x7i.4kc 4 жыл бұрын

thank you so much!!!

@wally19 3 жыл бұрын

thank you!

@lorenzoducciproductions8800 6 жыл бұрын

Can you do something like this but for the T3PA Thrustmaster pedals?

@lucaspereira9493 4 жыл бұрын

I just increased the dead zone a little to perfection and all my races do work well (F1 2018, project cars 1/2, motorist, euro truck, assetto corsa), except F1 2019 the game even recognizes the pedals but the accelerator doesn't work, just the brake and the clutch if there was any way to change the accelerator button but I don't know how to do it, can you help me?

@dario62589 6 жыл бұрын

I replaced the Potes for magnetic Hal sensors. This mod could give me more precision/resolution on the readings?

@Morzsika007 5 жыл бұрын

I used the Sketch Amstudio Guthub - 5 axis and Joystick.h file. It is work with G25/27 pedals.

@jonatasfernando1100 5 жыл бұрын

I donwloaded this folder, it work with Pro Micro and Leonardo ? I'm very noob with arduino XD

@bstotty 4 жыл бұрын

Would this allow me to use one adapter for the pedals & shifter?

@fto21 6 жыл бұрын

Awesome!

@iceman1st1 3 жыл бұрын

Will doing this increase the pedal range like the leo bodnar cable

@maikelvdv 4 жыл бұрын

Love the vid - where can I find the Logitech pedal adapter sketch (Or any sketch that would help me turn a 3-pedal set into a flight sim rig (R rudder, L rudder & brake pedal) ?

@user-vj8ni6dk6p 6 жыл бұрын

Shifter plz

@jacoblees312 4 жыл бұрын

Holy shit this is extremely underrated. I got a faulty g25 wheel a couple months ago and got a dfgt instead. I kept the pedals and shifter because the only reason I got a g25 was for the clutch. Now I can use them without paying $60 for the actual adapter

@andreatadde 4 жыл бұрын

Was wiring ok? Which axis did you left in the sketch (RY, RZ, Throttle)? Is analog 2 the throttle?

@vhs7411 3 жыл бұрын

@@andreatadde im also interested in knowing this

@JustWanaComment 3 жыл бұрын

Do you know what to do with floating pedals? I have a floating input from my brake pedal while I'm not even pressing it and as a result my rig has just been lying unused for months. Any help will be much appreciated.

@MINEventor 5 жыл бұрын

É possível usar simultaneamente em pedais de Arduino, h-shifter e Force Feedback?

@Jcarrillo-v3e 6 жыл бұрын

works for shifter?

@dinofehr2030 4 жыл бұрын

Could you put the scheme of which cable to connect to each pin of the db9? for example of the throttle cable in which number of the pin of the db9 go

@SteFFz99 4 жыл бұрын

Can I use the pedals and shifter with the same arduino?

@RyderUwU 2 жыл бұрын

i'll try this for thrustmaster, should be the same except for the port

@awwgbro6089 5 жыл бұрын

hello, i cant seem to find the sketch you used in this video, how am i able to obtain this?

@kartal2339 6 жыл бұрын

hii.. this is amazing can you demonstrate for shifter please?

@mbchannel1037 6 жыл бұрын

Please do LOGITECH G29 Shifter Standalone next. Bcus, I already bought that shifter and I thought it can use separately from the steering. But, sadly it wouldn't work. Hope u can make this tutorial.

@drxkshadow1893 6 жыл бұрын

One Of Da Kind I also need a shifter adapter.

@cathallawlor989 6 жыл бұрын

One Of Da Kind I don't need this but i think it should get a video regardless. It is probably a big problem.

@DrDandan 6 жыл бұрын

Not that easy to make the shifter adapter, as it uses 2 potentiometers. you can already buy one. just do some googlein

@mbchannel1037 6 жыл бұрын

Daniel Callighan well, the pedals in this video use 3 potentiometers. Anddd.. I saw 3 videos that already made standalone shifter adapter with arduino and teenzy ,but sadly they didn't show the tutorial to make that adapter.

@DrDandan 6 жыл бұрын

One Of Da Kind 3 independent axis, not 2 combined axis. It can be done, but requires more work. If it used switches , it would be very straightforwards.

@philippelangevin9170 4 жыл бұрын

I think the sketch for logitech_usb_pedal_adapter has disappeared from the github rep. Any sugggestion ?

@sneaky8675 6 жыл бұрын

I'd like to see your setup would be a good video

@harmcorbijn5776 6 жыл бұрын

I can't found the sketch in the libary. Can you help me?

@micknesevitch6431 5 жыл бұрын

3 pots but only 1 ground and 2 power wires? Does that mean you can jump the power and just use 1, to power all 3 pots? I also assume you can use this board to wire a wheel as well? I have an old TSW collecting dust cause it's got the old joyport connection. Looking to upgrade to usb.. Thanks!

@HentaiNat 3 жыл бұрын

Logitech sure loves that DB9 connector, they also use it on the Logitech speaker I have.

@Zeko019 Жыл бұрын

Hi bro, I have a DFGT and G29 Shifter and G27 Pedals. So my question is: Is it possible to wire the G27 Pedals and G29 Shifter to the same Arduino Leo? And how to mix the code from both projects? Thanks and nice work!!

@GrantCassar 6 жыл бұрын

Would this make it possible to use the pedals in say a shooter. Like one to reload and one to duck In a shooter?

@sapnu6969 5 жыл бұрын

is it possible to make this work with a pro micro as i already have a few of them laying around ?

@zachilesia9669 2 жыл бұрын

can you use the same Arduino for the shifter aswell instead of using 2?

@michallacki9462 6 жыл бұрын

Would this work with the Logitech Shifter ?

@mlit83 3 жыл бұрын

What resolution are the pedals at now then? Still 8 bits, or hopefully 10 bits or more for more resolution on the throttle, break and clutch

@DjPelland 3 жыл бұрын

How would this compare to Bodnar cable? Is there an increased resolution in in the pedals?

@jamieburke3909 6 жыл бұрын

Hi great video, could you please do a video on inverting the pedals in to gt style please

@lukebreadstick6562 5 жыл бұрын

kzfaq.info/get/bejne/nuChdZSLucmlfXk.html There ya go, not sure if you already saw that video. This is over a year, so you very well may have

@bentafee1192 5 жыл бұрын

Can u make this just with ethernet socket? Thrustmaster, or do i need to buy trj12 adapter

@MrTrelogikos 3 жыл бұрын

to everybody saying "there is no sketch for the pedal adapter" please read the description. the sketch just got renamed. dont look for "LOGITECH_USB_PEDAL_ADAPTER sketch". look for "Sketch Amstudio Github - Adjust 5AXIS"

@bossman1744 6 жыл бұрын

is this the same with the driving force shifter?

@YayDanMan 5 жыл бұрын

Thanks for the guide! Have now gone and done it myself though with a Pro Micro instead of a Leonardo board; only thing that seems to be happening for me that didn't for you is that I'm having to invert the pedal signals in games like Assetto Corsa, but that's not exactly a hardship, just a point to make I suppose

@caballete0075 5 жыл бұрын

Daniel Yeaman Need help! I have done everything, installed the g29 stack and calibrate the pedals with the windows software. All connections and downloads already done ✅. The thing is non of the games respond to the pedals. Can anybody give some light with this. PLEASE HELP!!!!

@luaumoal 6 жыл бұрын

Does it improve the precision? And can we use the same Arduino board to do the rumble mod?

@hugosanchez4189 6 жыл бұрын

Lucas Augusto I'm interested

@dominikdreier95 5 жыл бұрын

Hi, Amstudio I have a question does it work with an adruino nano?

@cpproctorpro8750 5 жыл бұрын

hi great video and great mods, but I cannot find the Logitech USB adaptor sketch, that you used in the video on GitHub, you say to download the g27 sketch, but do not show how to edit sketch, why not just put the Logitech sketch as the link. or please can you show how to edit the g27 sketch. please love the mods you clever man but need sketch pre-done for us not able to do regards

@TechiePocket1 5 жыл бұрын

This is awesome! Now I have 10-bit resolution for under $10 :)

@YayDanMan 5 жыл бұрын

Techie Pocket depending on the board you’ve chosen and if you’re using Joystick Library 2.0 that should be up to 16-bit for even further resolution

@tehgusbus2716 4 жыл бұрын

What's the difference

@alecont6488 3 жыл бұрын

@@YayDanMan Whit arduino leonardo ?? what bits ?? sorry for my english.

@djgaffey2009 6 жыл бұрын

I've had some trouble with this the sketch does not have a ino file I can't include the library and it will compile and upload to the leonardo but after plugging the pedals in they are not showing up in the device driver I have not got any idea where to go from here

@nojvaz2392 5 жыл бұрын

First and foremost, this is a dope ass channel. Anyways, i would really like to know how one can make the wheel base from scratch (DIY). I've seen a few but i would like another for reference. Stuff like this is true entertainment in my opinion. Thanks a ton!

@amstudioprojects 5 жыл бұрын

Thanks for checking out the channel! Yes definitely a project I will look at in the future

@caballete0075 5 жыл бұрын

nahtanoj Need help! I have done everything, installed the g29 stack and calibrate the pedals with the windows software. All connections and downloads already done ✅. The thing is non of the games respond to the pedals. Can anybody give some light with this. PLEASE HELP!!!!

@larsmars100 5 жыл бұрын

Can you also use an arduino nano?

@marselplay Жыл бұрын

Hello! I have an old steering wheel with a burnt Logitech G25 board, I would like to revive it with the help of Arduino leonardo, could you please make a video on how to connect or throw off any information in advance thanks

@momoster69 5 жыл бұрын

thank you!, just what I was looking for, you are a hero in my eyes Love - Momochan

@caballete0075 5 жыл бұрын

@momoster69 5 жыл бұрын

@@caballete0075 did u enable them in the settings, they dont get auto-detected my adorable dumpling

@caballete0075 5 жыл бұрын

momoster69 yes

@momoster69 5 жыл бұрын

@@caballete0075 did u do the windows calubration

@caballete0075 5 жыл бұрын

momoster69 it calibrate perfect 👌 but won’t work in the game. Did you did exactly as the video?

@wedepeixmen 4 жыл бұрын

is this tutorial available for the g27 pedals with an arduino uno? thanks for that video!!!

@adamlibby9842 4 жыл бұрын

The uno doesnt have a HID. You will need to use one that does. The micro and teensy are decent alternatives

@luccasvrb 4 жыл бұрын

how to use the pedals together with the shifter attracts this adaptation?

@ruitcys 4 жыл бұрын

Can you use only one Arduino to make a shifter and pedal adapter?

@thisismyviewingchannel926 3 жыл бұрын

does this work with the shifter too?

@IvanParada96 5 жыл бұрын

Hello, first of all thank you for your job. I cannot find the sketch you are using and with 5 axle controller i am having issues, could you help me?

@maikelvdv 4 жыл бұрын

Same issue here...please update the download link to pedal adapter sketch

@nopowerlaboratory 6 жыл бұрын

Any Vid for shifter to usb?

@extreme_rider_0483 6 жыл бұрын

Can you male a usb adaptar for the logitech schifter if it then works on ps4 because I have a thrustmaster wheel but dont want to spend so much money on the Th8A shifter sure it is higher quality but i dont play that often

@gordymc 5 жыл бұрын

Could you help me fix my G920. No longer detected by windows on connection. Can't find a sparky willing to look at it. Also is it possible to merge this Mod with the Rumble Pedal mod into the one unit. Using the 5v USB input as a power supply for the Rumble motors, instead of the external 12v power supply used?

@oskibaz 4 жыл бұрын

Can you make pedals and shifter using 1 arduino board?

@matiasemanuelrodriguez3089 2 жыл бұрын

Hello. How many bits would be left with this interface? Thanks.

@g3wracing693 4 жыл бұрын

Can I do this with another arduino? With UNO or Micro?

@luisfioravante2474 2 жыл бұрын

how many bits of resolution is the arduino independent for the computer?

@matthewharper6073 5 жыл бұрын

Do you know if this changes the pedals resolution at all? I know the bodnar cable ups it to 10-bit and the 3d-rap conversion is a 12-bit resolution

@caballete0075 5 жыл бұрын

Matthew Harper Need help! I have done everything, installed the g29 stack and calibrate the pedals with the windows software. All connections and downloads already done ✅. The thing is non of the games respond to the pedals. Can anybody give some light with this. PLEASE HELP!!!!

@paytufo 6 жыл бұрын

How much resolution it has? Thank's

@pjenglund 4 жыл бұрын

For the sketch, on Github go to AM-STUDIO/USB-5-AXIS-CONTROLLER

@brettt777 2 жыл бұрын

Do you know if this will work with Logitech flight sim rudder pedals?

@wishmaster-productions 2 жыл бұрын

Where is the logitech sketch to be found? cant seem to find the github from amstudio

@highseas6202 5 жыл бұрын

Can't locate that sketch anywhere. I can find one for the shiter, and one for both the shifter and the pedals. But not the one identified in the video. Anyone here found it?

@SackyX 5 жыл бұрын

I'm stuck I downlaoded the zip file but don't know what to do with it to install please helps a noob.

@Fatcode1 5 жыл бұрын

Please tell what is this compatible with i really need to know i need it to work with test drive unlimited pc, eurotruck simulator gold, and most of all american truck simulator thanks and please reply