I am glad your are getting stuff from the industry to try out. That means your channel is getting out there. Congratulations, you deserve it.
@ElectricSuperCar2 жыл бұрын
Thanks Friend!
@JerryRigEverything2 жыл бұрын
Pretty cool set up. I don't think it'll fit the hummer. But I like it!
@ElectricSuperCar2 жыл бұрын
Gotta go for their XL version 23'x20'x14.5'
@Jen0os2 жыл бұрын
Have you stopped working on your hummer? No update in forever :(
@mikejf43772 жыл бұрын
Looks very nice for the price, your getting pretty good at spray painting. Car is looking great. I like that color.
@ElectricSuperCar2 жыл бұрын
Thanks Mike!
@J_Bwn2 жыл бұрын
That booth would be perfect inside of a large shop. Not sure I’d care to have it outside blowing around and getting too hot
@ElectricSuperCar2 жыл бұрын
Thanks for the comment!
@deanmcmanis93982 жыл бұрын
My first, and last question was the price. Because as long as the paint booth does its job well, it has a tangible value. I looked the price up from your link, and the price(s) seemed reasonable. Of course the price varied with size, as you would expect. But especially if you were planning on doing a thorough job and/or multiple paint jobs, you could easily justify the price compared to the DIY version (which also had its merits/limits). It seems to me that they should make an indoor/outdoor model that secures in the middle to a standard 16' garage door opening, and has the indoor side which is cooler, and is unaffected by wind and sun, and the outdoor side, which extends your space for the staging, storage, tools, and items that you would want in-booth access, but would be less affected by wind and heat. And they might want to add an extra fan for a push-pull exhaust system. As well as a top down, fresh ventilated air tube/mask for breathing. Just brainstorming. Thanks for adding this demonstration as a working follow-up to your DIY booth video.
@ElectricSuperCar2 жыл бұрын
Good thoughts!
@dave58332 жыл бұрын
I had one and gave it away to my painter. They are great for under $1K. You will really like it I think. I would build better filters for incoming air.
@ElectricSuperCar2 жыл бұрын
Thanks for the comment Dave!
@ajzride2 жыл бұрын
I tried to use my inflatable paint booth last 4th of July in Houston. I tapped out when it reached 188F inside the booth, it’s a greenhouse effect. Booth worked fine when I used it again in November. The other problem is they are pressurized instead of vacuum cleared, so the clear coat creates a huge fog if you do a big job. I’m going to try and make an elephant trunk hooked up to big blowers to pull the overspray out. You can buy much bigger booths, I put a long bed F150 inside mine.
@ElectricSuperCar2 жыл бұрын
Thanks for the comment!
@RLCPLUMBINGLLC2 жыл бұрын
I live in Houston as well if you ever need a plumber or Construction worke I am the owner of RLC Plumbing and Cole Construction let the office know that you met me in this chat and I will hook you up with the family discount
@Wwhitewulf2 жыл бұрын
cool video. seeing the car in paint I nthe background looks really well too. as always, good work. Well done
@ElectricSuperCar2 жыл бұрын
Thanks Friend!
@KemDIY2 жыл бұрын
My only concern of this setup would be what if there is a power outage of the compressor stops. Will it all come down and deflate like bounce houses sometimes do? Could you imagine?! Nicely freshly painted car and it all deflated onto it.
@ElectricSuperCar2 жыл бұрын
Definitely a concern!
@KemDIY2 жыл бұрын
@@ElectricSuperCar maybe if this was my go to setup I’d at least have 4 PVC self standing poles for each corner. Maybe that would patent a cave in. Still cool setup.
@robertsavage74462 жыл бұрын
Thanks for the honest review always wondered if it was worth the money. Color looks great I saw your car in another video from holly high voltage. If you have enough clear on there cut and buff it. If not get more on for that show car finish.
@ElectricSuperCar2 жыл бұрын
Yes, definitely on the "to do" list
@RLCPLUMBINGLLC2 жыл бұрын
That is a supper smart idea to pour you paint out of the can.
@ElectricSuperCar2 жыл бұрын
Thanks Friend!
@bobert67542 жыл бұрын
Just out of curiosity... did you first see that inflatable paint booth watching Mike Patey's Scrappy build series? If not, I highly recommend it.
@ElectricSuperCar2 жыл бұрын
You'll have to send me the link
@miguelpagansr61282 жыл бұрын
Hey Jeremy glad it worked out, how about if you put the paint booth in your garage?
@ElectricSuperCar2 жыл бұрын
Doesn't quote fit. But that would be ideal
@J.P.__2 ай бұрын
So that's where the inflatable booth came from... shame it isn't waterproof.
@ElectricSuperCar2 ай бұрын
I know!?!
@rjung_ch2 жыл бұрын
Could you set it up in the garage, does it fit? If so, then it would be cooler and the wind wouldn't be an issue either.
@ElectricSuperCar2 жыл бұрын
Yes that would be ideal
@rjung_ch2 жыл бұрын
If you had a car in there, were just done and the air blower that inflates the thing would quit working, well, you'd lose the whole paint job and it would be a mess. Not sure with no other structures than the air pressure that it's worth anything really. Or can it keep the pressure while the fan is off?
@ElectricSuperCar2 жыл бұрын
Fans would need to be on
@spyro99792 жыл бұрын
why didn't you use the air exchange blower, was it unnecessary? amazing video as always
@ElectricSuperCar2 жыл бұрын
Not sure I understand the question. I used both the inflator blower and the ventilation blower. I would frequently no use the ventilation blower when I was not painting (filming)
@spyro99792 жыл бұрын
@@ElectricSuperCar oh thats why, I saw that you didn't use it while filming. Thanks
@Ericevijayohiani2 жыл бұрын
Please I'd like to know if you made the reare axle on how to combine two electric motor together any advice all I keep seeing online is one for just one electric motor. Pls sir any brief on the reare axle at the back I will appreciate sir
@ElectricSuperCar2 жыл бұрын
Hey friend! My setup is for one motor that powers both rear wheels. Are you wanting one motor per wheel? Or dual motor (front, rear) ?
@Ericevijayohiani2 жыл бұрын
Wow okay I thought the motor is combined one, yea I wanted dua motor for high speed so I got confused thanks for the response.