That's a very old term. I heard it first 30 years ago reading a book by Jim Tolpin called Building Traditional Kitchen Cabinets. Using them has saved me sooooooo much time.

Thanks. Glad it helped!

Yep. That's always true with any wood.

hahahahahahaha. You're not wrong. I don't really think the overall price of construction would be that much higher now that lumber has come back down from its lofty highs though.

I probably won't make another video. The angled shelves are basically the same premise as the flat shelves but with an additional cross piece added to keep the wine from sliding off. It's really that easy. Give it a try.

There are lots of different ways to do that, but I always add a crossmember across the back to serve as a nailer. When I go to install wherever the studs are, I can put a screw into them. I’m not sure that’s well explained but every commercial cabinet typically has a crossmember across the top and sometimes across the bottom for that purpose.

@@chrisarneson8644 Yes that makes complete sense. Thank you so much for the explanation. Assuming you attached each column to the crossmembe before screwing crossmember into the wall?

I ripped them from 1x6 fir boards.

@@chrisarneson8644 sweet thanks great video by the way! I'm excited to make the jig as well as the actual rack. The story stick is genius. Thanks again!

@@chrisarneson8644 one more question. The way you are using the story stick that is for the height of the rack correct?

@@Stvr1000 I make one for each dimension. I have one for height one for width and one for depths of the depth one can sometimes be skipped if it’s obvious