HOW TO CHANGE John Deere blade brakes 42 in.

No video

HOW TO CHANGE John Deere blade brakes 42 in.

Рет қаралды 75,052

Күн бұрын

I show you how to change your blade brake, on you deck of your 100 series John Deere.
Thank you very much for watching and God bless
blade brake amzn.to/3f3ULKi
grease gun amzn.to/3hCZdBk
grease high temp amzn.to/3jQxSxF
impact wrench amzn.to/2BxsGx5
impact sockets amzn.to/3hFPkmy
bagger kit (42 in.) amzn.to/2DTQooJ
DIY wooden ramps • Ultimate DIY wooden ramps
how to change oil • John Deere 100 series ...
how to level your deck • How to LEVEL your mowe...
grease and sharpen blades • John Deere 100 series ...
*Full transparency. I am a participant in the Amazon Services LLC Associates program, an affiliate advertising program designed to provide a means for me to earn fees by linking to Amazon.com and affiliated sites.
*Disclaimer - Thank you for visiting my KZfaq channel. Please understand that the content on the DIY jim KZfaq channel is intended for informational purposes only. I make no warranties about the completeness, reliability and accuracy of this information. Any action you take upon the information posted on my KZfaq channel is strictly at your own risk, and I will not be liable for any losses and damages in connection with the use of my KZfaq channel.
#johndeerebladebrake #changebladebrakejohndeere #johndeerebrake

Пікірлер: 131

@DIYJIM 4 жыл бұрын

Support my channel by using the links below. Please leave a comment and thumbs up it helps You tube promote my video. Thank you very much for watching and God bless blade brake amzn.to/3f3ULKi grease gun amzn.to/3hCZdBk grease high temp amzn.to/3jQxSxF impact wrench amzn.to/2BxsGx5 impact sockets amzn.to/3hFPkmy *Full transparency. I am a participant in the Amazon Services LLC Associates program, an affiliate advertising program designed to provide a means for me to earn fees by linking to Amazon.com and affiliated sites.

@DIYJIM 4 жыл бұрын

You can support my page by just clicking on one of the links above, thank you for your support.

@SSETTeam 8 күн бұрын

Thank u for showing me how to fix and replace the deck blade brakes👍

@DIYJIM 8 күн бұрын

Welcome, thanks for watching

@sheckyfeinstein 3 жыл бұрын

Yup. This was terribly helpful. Good filming and lighting made it easy to see. After 345 youtube videos, this is one of the two I needed. Thanks.

@DIYJIM 3 жыл бұрын

Glad I could help

@daddio7249 Ай бұрын

Thank you thank you. For some reason I was sure there was a short rod connected to the right hand brake and I couldn't find it. My brother and I searched on my carport floor for an hour. I decided to watch this video and what do you know, that stiff spring is all that goes there. At 1:40 is the perfect shot. I know, next time take my own video.

@DIYJIM 29 күн бұрын

Glad I could help thanks for leaving a comment

@GES8215 10 ай бұрын

I was really hoping not to have to drop the deck to do this, but I can’t stand the scraping sound anymore and of course I have a box full of socketS and none of them are 10 mm great video by the way hopefully I won’t have any parts left over when I put it back together

@DIYJIM 10 ай бұрын

Thanks for watching

@BrianCarlen 11 күн бұрын

Nice video, You only changed one. Its like doing brakes on a car, You have to to do both sides while you got it a part. You got everything apart. Clean it up. All dirt & de Bree on the deck. Plus clean all bolts, parts & pieces. Add some Noalox or compatible to the bolts before reassembly. JMO or maybe just my way of doing things.

@DIYJIM 10 күн бұрын

The other one never needs replaced. I recently just took both of them off. They never last. Thanks for watching

@peakcitydronietravel 3 жыл бұрын

Excellent video!! I just replaced all of my parts on the deck, and this video saved me big headaches far beyond just the brake pads! 👍👌🙏

@DIYJIM 3 жыл бұрын

Awesome glad I could help

@jamesrooney7689 3 ай бұрын

YOU JUST SAVED MY LIFE THAT SPRING WAS DRIVING ME CRAZY I SEE YOU TAKE THE BAR OUT THANK YOU THANK YOU

@DIYJIM 3 ай бұрын

welcome

@Blimkat 3 ай бұрын

that fucking spring lol!

@trixie6804 Ай бұрын

@@BlimkatThat fucking bar! That's what I'm dealing with.😜

@Blimkat 3 ай бұрын

Thanks cuz I'm a dumb dumb again, and I didn't take pictures first. I figured it would be easy but I couldn't figure out exactly how the spring was set. This JD D100 has been quite the adventure, plenty of cursing and some blood but I've pretty much rebuilt the entire thing so far except the engine itself. Satisfying AF when it's been repaired and back on the turf again. Cheers.

@DIYJIM 3 ай бұрын

Thanks for watching glad I could help

@randyd9805 2 ай бұрын

Thanks, this is the one and only video I've found that addresses this.

@DIYJIM 2 ай бұрын

Thanks for watching

@itsgr82batnvol6 3 жыл бұрын

EXCELLENT video! I had to work on my brakes last year, after watching the only video I could find related to this on youtube. Mine still aren't right, as previous video wasn't nearly as good as yours. My brakes will finally work properly again, after watching this. Thanks for posting this! Liked and subscribed ;-)

@DIYJIM 3 жыл бұрын

Thank you very much for subscribing. Glad I could help

@REPINSTR8BAMA 3 жыл бұрын

Thank You , Great Video.Im in the process of replacing my mower deck with a new one and I got confused with the exact order of how the bottom washer and the brake arm was assembled once I took it off 😄.. pictures & recording before disassembling really helps

@DIYJIM 3 жыл бұрын

Glad I could help thanks for watching

@pakoroutube 3 жыл бұрын

Gave you a like before I viewed this video. This topic not covered on YT until now. I had many broken V belts until I fixed my brakes.

@DIYJIM 3 жыл бұрын

thank you very much

@dennisbarber7919 3 жыл бұрын

Thanks for posting this video! I was wondering why my blades were continuing to turn for a while when disengaging them, & found I needed to replace these pads. Glad I found this video & will be subscribing to the channel!

@DIYJIM 3 жыл бұрын

Glad I could help, thanks for subscribing

@jackcoyle1413 Жыл бұрын

Good job expaining and illustrating what could be a pesky chore. Thanks!

@DIYJIM Жыл бұрын

Thanks

@xlordxxenux556 21 күн бұрын

I have a S110 and the part number on my break pads are GX26055 and i cant for the life of me find them. So im going to use the link from this video and pray it works.

@DIYJIM 20 күн бұрын

Hope it works for you thanks for watching

@markm6098 4 жыл бұрын

Very clear instructions easy to follow, thank you

@DIYJIM 4 жыл бұрын

Thank you glad I could help

@JoeMac1983 3 жыл бұрын

Dude, sir, thank you. Seriously, thank you for doing this video.

@DIYJIM 3 жыл бұрын

Glad I could help

@hjagernauth 3 жыл бұрын

Thanks once again brother. It helps alot. You are very articulate and clear.

@DIYJIM 3 жыл бұрын

Your welcome

@alancowart4418 3 жыл бұрын

great video the only thing when putting pulley back on make sure that it turns the blade, it has notches on pulley to line up correctly. i learn that the hard way!!

@DIYJIM 3 жыл бұрын

Thanks for the info and thanks for watching

@Sealion_by_Dr._Joe_Wallace 3 жыл бұрын

I really needed to see you do the other blade brake as well since the configuration of the parts is a little different. I’ve had to start with a totally blank deck place all the mechanisms on with new parts.

@DIYJIM 3 жыл бұрын

Sorry my other blade break did not need replaced. Hope you get it figured out

@troyb.4101 2 жыл бұрын

The second brake now has a rod instead of the black heavy spring, and the rod to the other brake has an nut on the end of it, so it can be adjusted. Mine is like a 2011 D125, most of the linkage is pretty close to that. I see two parts that are different.

@barrykery1175 3 жыл бұрын

Great video. Thanks for posting. It was very helpful. PS......I just bought my S100 last week and I really like it. Cuts my cutting time in half from what it took me to do before. I have a wider cut and can cut at a much faster speed. Even though the engine on the S100 is much bigger than my old Craftsman Lawn Tractor, since this takes a wider cut and i can go faster, I actually use less fuel to cut my lawn. Barry

@DIYJIM 3 жыл бұрын

Glad it helped! Thanks for watching have a great summer

@supremedrayden1976 3 жыл бұрын

How do you change the brake rod on a John Deere riding mower

@jaygdav Жыл бұрын

Big thumbs up. My brakes are finally working again!! 🎉

@DIYJIM Жыл бұрын

Awesome thanks for watching

@sabrinaann7623 2 ай бұрын

Very helpful! Thank you! Your awesome!

@DIYJIM Ай бұрын

You're welcome!

@mrvantaztic Жыл бұрын

Brother, these D110 "how to's" are superb. Got a new deck and swapped out all the components. I also took pics/vid, but not of everything, so thank you for showing how to adjust the pulley brakes. Subscribed! God Bless.

@DIYJIM Жыл бұрын

Awesome glad I could help. Thank you for the nice comment.

@mrvantaztic Жыл бұрын

@@DIYJIM Do you by chance know the name or part number for the smaller spring connecting the opposite blade brake and idler pulley bracket? Falling down JD's parts catalog rabbit hole. TY for any other help.

@DIYJIM Жыл бұрын

@@mrvantaztic sorry i don’t

@mrvantaztic Жыл бұрын

@@DIYJIM No worries, I called the dealership (which is what I should have done to begin with). GX26251

@OneDay8516 2 жыл бұрын

Nearly identical for my D110. Thank you so much for this excellent video!

@DIYJIM 2 жыл бұрын

Thanks again

@tonyaz5516 Ай бұрын

Outstanding!

@DIYJIM Ай бұрын

Thank you kindly!

@bumpyroads5197 3 күн бұрын

thanks very much. very helpful.

@DIYJIM 2 күн бұрын

You're welcome!

@stevenpartin6744 4 ай бұрын

Thank you For Your Help!!!! Great Teacher!!!!

@DIYJIM 4 ай бұрын

You are welcome! Thanks for watching

@ahmedbandukda3439 Жыл бұрын

Very well done. Thank u for that. I have seen your other vedios n are very clear n educational with neat working parts.

@DIYJIM Жыл бұрын

Thanks for watching my videos

@rcronin1 2 жыл бұрын

Ty, I didn't even know I had brakes!

@DIYJIM 2 жыл бұрын

I think next time my breaks wear out I am going to just take them off. Thanks for watching Rebecca

@GetRealBaby Жыл бұрын

Yet another excellent video. Thank you very much. You be da man!

@DIYJIM Жыл бұрын

Thanks for watching John

@scottygoodwin4276 Жыл бұрын

Thank you, good helpful video. GOD BLESS.

@DIYJIM Жыл бұрын

Glad it was helpful!

@jeffwilson4972 2 жыл бұрын

Thanks for this video. Very helpful!

@DIYJIM 2 жыл бұрын

Your welcome

@TravisBolton-ru4ze 2 ай бұрын

great job

@DIYJIM 2 ай бұрын

Thanks

@user-se3ry8hc1o 22 күн бұрын

Have you ever had trouble getting the spindle off so u change the brake? Help. Thx

@DIYJIM 22 күн бұрын

No, I only did it once.

@adamwagner7105 Жыл бұрын

3:05ish. Says "7/16". Think he meant 7/8". Great video though. Watched a dozen vids and finally have one that shows good angles of how things go together. Can't even tell from the JD Parts Catalog.

@DIYJIM Жыл бұрын

Glad you like thanks for watching

@M70ACARRY Жыл бұрын

Deck looks like my craftsman

@DIYJIM Жыл бұрын

Thanks for watching Mark

@craiglist5889 3 жыл бұрын

Thanks for posting this!!

@DIYJIM 3 жыл бұрын

Your welcome thanks for watching

@marymayes5056 3 жыл бұрын

Great help thanks

@DIYJIM 3 жыл бұрын

Glad I could help

@OneDay8516 2 жыл бұрын

Thanks!

@DIYJIM 2 жыл бұрын

Thanks for the super thanks really appreciate it!!

@glasser620 2 жыл бұрын

are there any adjustments for the blade brake, or should you just replace it when the blades don't stop? On a E110

@DIYJIM 2 жыл бұрын

No adjustments replace before they wear out. Thank for watching

@dddddd2100 3 жыл бұрын

I think the brakes are frozen on my JD 125, I'm not familiar with how they should work. while sitting on the mower as a reference point the brake is against the left blade pulley and the right blade pulley spins free. this is with the mower off and not running , blades are disengaged. are the brake arms supposed to move freely away from the pulleys by hand? the springs are rusted and I can't budge the brake arms. I have some vibration when the blades are engaged, this is worse when the deck is raised for higher cutting level. I have replaced one spindle, both blades, belt to engage blades, both flat idler pulleys...any advise on this? Thanks

@DIYJIM 3 жыл бұрын

Some people just remove the breaks that is what I am going to do next time they wear out.

@martinrps13 2 жыл бұрын

Vibrations are caused by bad pulleys or unbalanced blades. The reason it changes when you move the deck up and down leads me to believe it is a pulley issue. Turn off the engine! Lower deck to the half way setting and then engage the blade drive lever. Get down and look at how the pulleys all line up compared to how the main pulley is on the engine. From there you should see what is going on and what is possibly out of line. Can go further and remove spark plugs and physically turn the belt and watch them all as they move. Also take the belt off and spin pulley and spindles by hand to check for wear and noise. Any one that makes noise or doesn’t spin freely should be replaced.

@peter97379 Жыл бұрын

What’s the function of that brake? My s110 with 40 hrs starts making a noise when i disengage the blades or when i turn off the engine. Looks like i might have to replace this brake.

@DIYJIM Жыл бұрын

Just stops the blades faster. I think when mine finally wears out again I’m just going to try taking it off and go without.

@gadasavideos8564 2 ай бұрын

@DIYJIM I'll be doing that tomorrow. My neighbour is having issues . Deck belt comes off repeatedly , then burns up. Found that his brakes were not moving off the pulleys. Pad now worn down so much that the whole thing gets rotated by the pulley to the wrong side of the pulley into the belt. I'm hoping that I've fixed the belt issue by shortening his cable. It was same length as a new one but there was an inch of pay in the lever before cable moved. Other option was to cut off cable anchor on deck and replace with an adjustable one that they had on the L100.

@gadasavideos8564 2 ай бұрын

100 series is too general. L100 deck and e100 decks are not the same. For e110 part supposedly is gy22309 . The e100 deck looks like your's . L100 has brake rod on right whereas e100 has spring like your's

@DIYJIM 2 ай бұрын

Thanks for watching

@troyb.4101 2 жыл бұрын

7/16's Maybe 15/16's 7/8's? My D125 linkage is close too that, the one brake now has a linkage to it, and the other has a nut on it. The longer push pull linkage now has a round hole it dropps into, not a slot.

@DIYJIM 2 жыл бұрын

thanks for watching

@glasser620 2 жыл бұрын

Will these brakes fit a John Deere E110 ?

@DIYJIM 2 жыл бұрын

I think they are same

@LightTouchWoodstock 3 жыл бұрын

Hi. Jim are both brakes the same?

@DIYJIM 3 жыл бұрын

Yes, thank you for watching my video hope it helps you

@LightTouchWoodstock 3 жыл бұрын

@@DIYJIM Thanks for the videos. I recently bought a LA105 for $450. I've been waiting three days for Fedx to deliver my blades. I'm also going to change the Steering Sector & Pinion Gear . Thanks again for making life easier. :-) Stay Safe Brother Peace

@DIYJIM 3 жыл бұрын

nice comment thank you. If there is another video you think of that you would like to see. Let me know maybe i can make it and it will also help others.

@troyb.4101 2 жыл бұрын

@@LightTouchWoodstock Grease the front end, makes it steer 100% easier.

@jeffgriffin4239 3 жыл бұрын

How'd you get the deck so clean on an old deck?

@DIYJIM 3 жыл бұрын

its not always that clean, but I like to clean it before I make a video. Thanks for watching

@troyb.4101 2 жыл бұрын

At about ten years old the yellow paint job peels off and the rust shows. There is no primer under the yellow, just rust. I'm in Arizona a dry environment, as well.

@justinhuffine432 3 жыл бұрын

Hey how to put a spring on back on the the mower deck la 115 John Deere

@DIYJIM 3 жыл бұрын

Maybe this video will help kzfaq.info/get/bejne/e8qqfKSEmsyUoqs.html

@MIKE-mg5ks 3 жыл бұрын

THE SHORT PART OF THE SPRING IS ATTACHED TO WHAT??

@DIYJIM 3 жыл бұрын

Sorry not sure what you mean, maybe watch again sorry can not help

@martinrps13 2 жыл бұрын

The brake spring?

@leathermule4824 2 жыл бұрын

7/8th socket

@DIYJIM 2 жыл бұрын

Thanks for watching

@gusorviston1 3 жыл бұрын

need to add how to adjust the break arms.. you wiggling it isn't the lever on the mower.. so useless..

@DIYJIM 3 жыл бұрын

Thanks for watching, I really don’t think you can adjust it

@philshock3805 3 жыл бұрын

@@DIYJIM I think yours is newer than mine but my 2013 D130 has brake adjustments on both arms. Where you simply turned the long rod and removed it, the end of mine is threaded and held on with a nut. (same deal with the short arm of the other brake) According to the manual, the correct adjustment is a 2-3mm gap between the back of the nut and brake bracket. I guess removing the adjustment feature was either a cost-cutting move or just not necessary. BTW, thanks for posting this! I'm replacing both pads - on one of them, the entire bottom end of the pad is gone. I needed to do it last year but couldn't find any info about it or even a part number.

@timothyblackman1730 3 ай бұрын

Why do you need a blade brake

@DIYJIM 3 ай бұрын

Not sure safety I guess

@timothyblackman1730 3 ай бұрын

Thanks for answering

@martinrps13 2 жыл бұрын

2:48 7/16???

@DIYJIM 2 жыл бұрын

Thanks for watching

@leroytony 3 жыл бұрын

I know I'm a year behind. I just found your channel after looking for this tutorial. I will say your video was the best that I've found on KZfaq. Great video and thanks for helping me get through this.

@DIYJIM 3 жыл бұрын

No problem glad I could help