DJ TIPS: SETTING TRIM AND MIXEER VOLUME LEVELS

Рет қаралды 3,716

Күн бұрын

SUPPORT WITH SUBLOVE: www.youtube.co...
I would love to invite you to check out some of the other DJ Tips, DJ Learning, DJ Industry, and Events as a whole here on the channel.
I am sharing lessons, situations and real-deal experiences that I have personally been exposed to here as a Dj and Entertainment company owner in the event industry of now just about 20 years.
Social information:
/ jasonjani
/ sceeventgroup
Booking: www.sceeventgr...
Jason on Facebook: / iamjasonjani
Jason's Party footage on @SCEEVENTGROUP on KZfaq: jasonjani.tv

Пікірлер: 19

@Alpha-ro8sc Жыл бұрын

Excellent advice regarding gain structure. Same technique applies to powered speakers as well. Called it clipping back in the day when bumping the compression lights on apm racks.

@jpswerve182 5 күн бұрын

I've watched a few veteran mix DJs who always had their volume faders set around the 7/8 mark but didn't really understand why. Now it all makes sense.

@horsemouth76 Ай бұрын

I like your approach gain management. Great technique. I’m gonna try this on my next gig.

@djsuperman9365 Жыл бұрын

Thank you Jason.

@FeedbackEntertainment Жыл бұрын

Great advise, People should watch. Gain Staging. this is also done with your external mixer... And yes shouldn't be hitting the red.

@Jason_Jani Жыл бұрын

yes of course! thank you

@Ziggy_v2 Жыл бұрын

Another great nugget 👍 - thanks for the tip

@Jason_Jani Жыл бұрын

thank you

@clarencewhorley6077 Жыл бұрын

Gonna try this ⚡️

@funkytomtom Ай бұрын

Hm, is it really more simple if you have to baby your channel fader? Also, the mixer manual usually advises to run channel faders at full volume and use trim to adjust for weak or too-strong tracks. Any thoughts? Thanks.

@GreenbergCarolyn 2 ай бұрын

ok so u said do it in Serrano or your trim when you adjust the trim on your controller should I also CHANGE in Serrato o??/ty

@robertewbank1440 Жыл бұрын

This is never talked about I think it's very important how the levels need to be because songs are never recorded at the same level and seen and heard djays destroy a mix and I have done that as well I use the volume controls.than the fader on the mixer gives me better volume control..... Learned that from a friend of mine...

@dtjamslive8082 Жыл бұрын

TY you! What's the best gain setting on the speakers (powered)?

@Jason_Jani Жыл бұрын

Depends on the brand and speaker. For RCF must be opened all the way up per the manufacterer, where EV is 2pm on a clock.

@dtjamslive8082 Жыл бұрын

TY for the response👊🏽 Currently rockin RCF EVOX 12s & QSC 12s with a KS118. I've been around 1 o'clock on both systems and when using the QSC sub @ 11 o'clock.

@stevedub5006 Жыл бұрын

@@dtjamslive8082your RCF should be all the way up then you just adjust with your mixing board. With the QSC on high pass and a sub paired you can go usually up to about 3 o’clock without clipping.

@dtjamslive8082 Жыл бұрын

@@stevedub5006 TY! So RCF all the way to 6 o'clock?

@stevedub5006 Жыл бұрын

@@dtjamslive8082 YUP! Just keep an eye on the limit light. It's OK if it blinks now and then. Those Evox12 are so powerful though I rarely need to push them to the limit. I have the J8s as well. Love both systems for different size rooms/crowds.