DJI Avata 2 Stick Cam Flight! Talk about Accessories!

Рет қаралды 1,688

Ай бұрын

Stick cam used in this video: www.telesinstore.com/collecti...
bull bars I recommend: amzn.to/4cf0CKF
Check out what Andy and I are up to: • DJI AVATA 2 INSANE LED...

Пікірлер: 32

@mcmediaandfilm Ай бұрын

The Avata boys ! Keep em coming 😊

@LowryDroneography-Steve Ай бұрын

Awesome! Yeah, one of the things holding me back from extra prop guard protection is the weight, because I like a little bit of acro too and don’t want to lose much in the way of performance if at all possible. If you guys manage to come up with a minimal compromise solution, you can put me down for one. 😅👍

@NJ-Tech Ай бұрын

Thanks! Yes 100% what were are tirelessly working on. Watch this space 😊

@mucy2807 Ай бұрын

Subbed and liked 👍🏻 just come from AKs channel 🎉

@NJ-Tech Ай бұрын

thanks so much! 🙏

@GigawattsFPV Ай бұрын

Superb content as always my dude. Hope you’re keeping well mate 👊

@NJ-Tech Ай бұрын

Hey bro long time! Hope life is good with you 🙏🏼

@GigawattsFPV Ай бұрын

@@NJ-Tech Yeah man, it’s been far too long. Life’s been a little intense over the last couple of years! Would love to meet up for a catch up if you’re ever over this way. Do you have any gigs at the white rock coming up?

@NJ-Tech Ай бұрын

@GigawattsFPV not down that way again for a while I don't think bit ill let you know if I'm local. Are you still flying??

@gee4zfpv Ай бұрын

Great discussion. I just got the A-2 and have been looking at bumpers but have been hesitant to buy the "ribbed" style because they do look "draggy" and heavy but I couldn't find any info about weight or aerodynamics. Look forward to see what you guys come up with- hopefully access will be possible in the US

@NJ-Tech Ай бұрын

It will be don't worry, we got you 😉

@velocityvibes-fpv Ай бұрын

Hey what angle is your camera at during this flight? btw very smooth flying nice work

@NJ-Tech Ай бұрын

As this was a new spot and i didnt want to fly too fast i usually set it between 20 to 25 degrees. When i change to flying acro then i will usually run between 30-35 degrees. Hope that helps :)

@brandon9689 Ай бұрын

I decided not to get the ribbed riders for the same reasons. Seems like a huge hit to aerodynamics, and it would throw off my entire hard case setup. I've been crash free for about a month now. A few light bounces off the grass during the occasional stall, or getting used to low voltage sag. Those bull bars are pretty sweet though.

@NJ-Tech Ай бұрын

Totally. This is why I stress how subjective this all is. But yeah, the bull bars are great insurance!

@Ariel-lt8ln Ай бұрын

This is great. Thank you. I just installed the bull bars and I was nervous about it. I wasn’t sure if installing them would affect my DJI Refresh since it’s a 3rd party part. I also installed the aluminum motor caps. What are your thoughts?

@NJ-Tech Ай бұрын

Thanks for the kind words! Yes, the bull bars are an easy recommendation for me. Anything that adds weight must have great value for the payoff in performance, even when it's only a few grams it all adds up. I personally don't need the feet but if they work for you then great. It's always subjective to your flying, so go with your gut.

@darrensims6168 Ай бұрын

The green bumper guards looks nice can you send me a link for those

@NJ-Tech Ай бұрын

@@darrensims6168 those are a prototype (of many) we are are working on. We will have more info on these when they are availale but right now we are still in the testing phase of the project :)

@darrensims6168 Ай бұрын

@@NJ-Tech look forward please inform me when they go on sale

@rizangg Ай бұрын

could you tell us your gain and expo setting on your avata?

@NJ-Tech Ай бұрын

I have a video already about this. Go check it out 👍

@magiccitymakerspace Ай бұрын

Can you tell us anything about the LEDs? I saw your friends video and the impression I got is that you’re hoping to sell it as a kit?

@NJ-Tech Ай бұрын

Hi. Yes we are working on a lighting solution but very much in the prototyping stages. The first product we will have ready will be our bumpers. We will have more info on this all soon.

@gee4zfpv Ай бұрын

Hey I have a weird problem with my new Avata 2- just got the RC3 today and trying to get in full manual mode (been building and flying fpv since 2016) Seems that turning off the Attitude Limiter is not working. I switched the RC switch to M, switched to manual in Custom mode settings, turned off the Attitude Limiter, adjusted my rates, adjusted gimbal to 15 degree tilt and adjusted the throttle stick on the RC- still limited! Can't flip or roll more than around 25 degrees from level... I reset everything a couple times but to no avail???

@NJ-Tech Ай бұрын

thats werid... as far as im aware, there are three warnings, the beginner mode warning, the manual mode warning and the attitue limiter. If you have done all 3 then it should work fine. You might have a weird bug there! Are all units up to date on the FW? RC3/'goggles/avata2? You might need to relash the firmware if its still not working after checking all that. Do keep me posted with how you get on..

@gee4zfpv Ай бұрын

@@NJ-Tech So an update. I found that even if the switch is on manual upon startup, the Avata2 defaults to N (Normal Mode) So I switched the switch to normal then back to manual and it actually goes into manual but I can't power up in Manual so I have to switch back to N and take off, then hover and switch to manual in the air... THEN a stick diagram appears which requires me to put the sticks in a certain position to activate full manual mode! What a pain in the A**!!! Is there not a way to arm the drone on the ground, switch to full manual and take off???

@NJ-Tech Ай бұрын

@gee4zfpv yes you can take off in manual. Put the throttle (motor start) on the other customisable rocker switch. Then have the throttle at zero, set to M mode and arm.

@gee4zfpv Ай бұрын

@@NJ-Tech Thank you!!! I'll give that a try!!