Hello i have avata 2 how to enable acro mode coz no acro mode on may goggle screen?

How to show the battery voltage of the drone in the screen?

Great video. Now, where can I buy the controller 3?

It's a great video.

As long as the stepdown isn't connected to PWM that sounds like a good place. If it's PWM, it can be problematic even if not at first. Not a printer for me as someone in the "enthusiast" category, but it's interesting. Seeing something that relies on custom slicer doesn't really bode well for its adoption.

Hi NJ. I remember buying the Ender 3 from your many years ago. It did me well . I sold it for no apparent reason. Half tempted with this little thing

Perfectly explained! I'm coming from being a qualified helicopter pilot so understood this very easily. My helicopter instructor was always saying that the helicopter is always trying to kill you so we always had very good control throughout the entire flight. Learnt in the R22 which is a very unforgiving helicopter if you don't show it respect. Well done on a great video!!

This is really a YES! I think I need to buy the new FPV Controller 3.!

👀

Superb content as always my dude. Hope you’re keeping well mate 👊

Is this a good drone for someone looking at getting in to the FPV free style world or should I go with a BNF, Controller, and goggles?

So cool! Thanks for the vid!

How come the acro doesn’t show up on my top screen ?

I been venturing over to Manual mode but afraid to turn the attitude off because I didn't understand the settings and there's a big difference between flying for real vs a sim like liftoff or Uncrashed. Now I can plug in some parameters, practice, and pop of the training wheels er... props I guess 😆 Thank you for the excellent and easy to understand explanation! I needed this more than you know lol.

Subbed and liked 👍🏻 just come from AKs channel 🎉

Hey I have a weird problem with my new Avata 2- just got the RC3 today and trying to get in full manual mode (been building and flying fpv since 2016) Seems that turning off the Attitude Limiter is not working. I switched the RC switch to M, switched to manual in Custom mode settings, turned off the Attitude Limiter, adjusted my rates, adjusted gimbal to 15 degree tilt and adjusted the throttle stick on the RC- still limited! Can't flip or roll more than around 25 degrees from level... I reset everything a couple times but to no avail???

could you tell us your gain and expo setting on your avata?

Can you tell us anything about the LEDs? I saw your friends video and the impression I got is that you’re hoping to sell it as a kit?

Great discussion. I just got the A-2 and have been looking at bumpers but have been hesitant to buy the "ribbed" style because they do look "draggy" and heavy but I couldn't find any info about weight or aerodynamics. Look forward to see what you guys come up with- hopefully access will be possible in the US

I decided not to get the ribbed riders for the same reasons. Seems like a huge hit to aerodynamics, and it would throw off my entire hard case setup. I've been crash free for about a month now. A few light bounces off the grass during the occasional stall, or getting used to low voltage sag. Those bull bars are pretty sweet though.

The Avata boys ! Keep em coming 😊

Hey what angle is your camera at during this flight? btw very smooth flying nice work

Thumbnail is such a lie, as if you’d ever have an iPhone. Clickbait I tell thee!

This is great. Thank you. I just installed the bull bars and I was nervous about it. I wasn’t sure if installing them would affect my DJI Refresh since it’s a 3rd party part. I also installed the aluminum motor caps. What are your thoughts?

Awesome! Yeah, one of the things holding me back from extra prop guard protection is the weight, because I like a little bit of acro too and don’t want to lose much in the way of performance if at all possible. If you guys manage to come up with a minimal compromise solution, you can put me down for one. 😅👍

Excellent explanation of the Rates! It's one of the best I've watched. I will fly the Avata 2 in Manual/Acro mode soon, and your recommendations greatly help me. Thank you. I'm subbing. Greetings from Montreal, Canada.

Amazingly good explanation!! Thanks. Just entering fpv and tried full manual for first time today watching this vid in a field first 👊 Great fun if a little scary at first 😂 it only occurred to me after the second ‘landing’ that I can easily switch back to S or N of things get a little sketchy..! Which they did 😱

I learn from your videos. Thank you :) My 2 suggestions for the next educational material: 1. camera angle - do you stick to one angle (how many degrees) or do you change it depending on the situation? (same witch RATES -keep always as shown on earlier video or changing it depending od situation) 2. video settings details - your videos recorded with Avata look much more pleasing to the eye than most other videos from this drone on KZfaq. How do you set up the recording in the camera, how do you process the video (LUT, effects etc.) and prepare it for sharing on KZfaq so that it looks good? (your image is sharp, smooth, does not "jump" / "skip", unlike what is often seen in other videos on KZfaq - I do not know the technical word for this image problem, visible especially during turns - which does not occur in your case)

@NJ-Tech I couldn’t find your controller layout in community section for Steam version of DCS. Where can I access it?

Would welcome your inout on what rate range would suit indoor drone tours, have my cinelog 30 dialled in but the avata2 has no throttle expo and even with a 5 camera angle its still lively flying through a house. I need gentle curves when turning which is a roll and yaw combo. i keep experimenting but i’ve not found a sweet spot yet, its just too fast at times.

what camera angle do you use?

Does any of you know how to get the stanadalone version to install? I managed to make the steam version run and fly, but I have no idea how to even install the standalone

Are there settings for throttle anywhere? I’d like to add some deadband.

Great vid. I wish DJI would show graphs while you change it. This is much more intuitive.

NJ.. I was needing some guidance on manual mode and rate and expo settings, thanks for this video!

Nice view❤

I am about to buy one for 200 with goggles and transmitter is it worth it being so old?

Perfect explanation! Thank you :)

Very nice video. Congrats and thanks. Have a nice weekend.

Wow, you guys did a great job with this. As. Retired flight engineer, and jet engine tech, this took me back to the “Sciences of flight” days talking about energy, and prop wash, stalls, etc. My A-2 should be here on Tuesday, been flying Mini 3s 4 Pros, ready for first FPV experience! Later!

As long as your not fighting wind it gets to like 50 or 60 mph in what feels like under 2 seconds. It may not wow a seasoned pilot, but it's still plenty for some really fun chase cam footage.

Excellent explanation!

Perhaps the best explanation of rates that I’ve ever heard . Thanks!

Motion controller? Do you use Gyroflow?

Want to know about my rates? kzfaq.info/get/bejne/rOBih8iqvdi2eps.htmlsi=to4tmiKDw-jGGBay

Wante my rates and how to tune? kzfaq.info/get/bejne/rOBih8iqvdi2eps.htmlsi=to4tmiKDw-jGGBay

What’s your rates

Yes mate! Killing it 🤟🏼

You and ak are killing it atm with avata 2 content , you are showing how a rtf dji product can be up there with the big boys of fpv .Sure it has it faults dont they all ? Seen so many newbies crash and smash them up im not a newbie btw done fpv for 14 years back in the 1.2 video days and uhf i have the avata 2 i installed the bumper guards and hit a branch that wasnt in leaf at full speed not a scract or mark at all its my profuct for work and pleasure ahd it just works and as for battery life well i will let your past video showcase that good stuff Nige keep it coming wasnt long enough gor me lol 😅

What kind of flight time are you getting at these speeds?