DJI FPV Drone Teardown

No video

DJI FPV Drone Teardown

Рет қаралды 22,203

Күн бұрын

This Video Is A Teardown Of A DJI FPV Drone.
Website link if your located in the UK and are interested in getting your drone repaired:
dronedrop-off....
DJI Store Affiliate Link:
click.dji.com/...

Пікірлер: 96

@brortobias8908 2 ай бұрын

congrats first teardown that actually explains how to take of first plastic

@deadlyk1tten 3 жыл бұрын

great one, and so far seemed to be the only real complete teardown that can put it back together

@sergiolpzmar3513 3 жыл бұрын

Awesome video, and a new appreciation to the engineering that was put into this drone. Absolutely awesome.

@dreacul Жыл бұрын

A very bad one considering the fact that the design of the arms and frame breaks instantly if the drones touches a flower in flight.

@michalkalavsky 3 жыл бұрын

Excellent teardown!! Thank you very much 👌

@dronedrop-off5955 3 жыл бұрын

No problem glad you liked it:).

@NOT_ANOTHER_FPV 3 жыл бұрын

I need a slow video of you putting it back together :)

@jayboddie8718 2 жыл бұрын

Just reverse the steps

@jayboddie8718 2 жыл бұрын

That's what I did

@ghosttjr2 3 жыл бұрын

Best teardown yet

@dronedrop-off5955 3 жыл бұрын

Thank you:).

@mlunden11 3 жыл бұрын

Unbelievable thats IT.

@markbrown53 2 жыл бұрын

Thank you; I'll be tearing mine down this afternoon.

@jayboddie8718 2 жыл бұрын

Was you able to tear down your fpv I'm at the soldering part but never did it before

@markbrown53 2 жыл бұрын

@@jayboddie8718 hi Jay I need to order the main body (housing) I'm newer to this world of jargon; I thought I just broke an arm; I broke the arm and the main body where it connects. I am going to attempt it? I need to step in to this section of Drones and FPV, if I'm going to keep going. I've destroyed several UAV'S this has been my Covid outlet!! It's either I start riding street bikes again or (wife not happy) a substitute for adrenaline. I'll keep you posted, Thank you to everyone that post about this subject...... I really appreciate it.. Real Raheem Jason Bardough. Thank you.

@jayboddie8718 2 жыл бұрын

@@markbrown53 you can definitely do it especially if you know how to solder wires and at least you know what the problem is in my case I have to do a tad bit guessing work. And on the bright side there are replacment parts available now. It's definitely possible to self repair DJI is ripping people off with care refresh for sure. Let me know how it comes out hope it works

@giusepperegano5098 2 жыл бұрын

Thank you ..

@adrianglessner5979 2 жыл бұрын

nice work

@rosturhoskuldsson2331 2 жыл бұрын

Very helpful !

3 жыл бұрын

Cool, what electric tool are you using?

@mssippijim 4 ай бұрын

that is one cool micro screwdriver.

@kwadkong 3 жыл бұрын

Good teardown. Very cool rebuild!

@russtsy7957 3 жыл бұрын

dang man how is this more watched, really cool watch

@jean-michelargentin5465 2 жыл бұрын

That was the best video breakdown ever. Where can I get that pen Allen wrench drill? What’s the brand name? Thank You

@sotheamam1244 2 жыл бұрын

Gee man....alot of screws

@dolbyblustar 2 жыл бұрын

Quality mate. You seem very tuned with this. Interesting vid for sure 👍🏻

@meudrone4k369 2 жыл бұрын

Chique irmão 👍🏻

@dragonflycinematics3789 3 жыл бұрын

Absolutely briliant, just subscribed.

@Falcon4117 2 жыл бұрын

Great video, really appreciated 👍

@KikoFJGS 3 жыл бұрын

23 subs, and tearing down a 1200$ drone?????. 👏🏻 👏🏻 👏🏻... 🎉 🎊 🥳

@justsendet4994 2 жыл бұрын

Add some music to your video bro it will be epic🔥

@gigazman 3 жыл бұрын

Now rebuild the drone on a carbon fiber frame!

@OneOfTheRobs 3 жыл бұрын

Hell YEAH

@BurningParisMusic 2 жыл бұрын

Has anyone done it yet????

@CDigata 2 жыл бұрын

no comments on the mini 3 td.. but nice 1 james

@dronedrop-off5955 2 жыл бұрын

Thanks Chris Ive Just Sorted This Now. Hope You Enjoyed The Video.

@mfahad5 9 ай бұрын

Where there is a hot glue on hex screw? Is it normal did dji put it there?

@user-cy3ro4hy1p 3 жыл бұрын

厲害

@michalkalavsky 3 жыл бұрын

Can you make a controller teardown? It would be great to see gimball quality and type, if its potentiometer or hall sensor. Thanks 👍

@dronedrop-off5955 3 жыл бұрын

I might do in a future video.

@ddegn 3 жыл бұрын

The sticks are Hall sensors. Search my user name at Hackaday(dot)IO. The camera angle control is a potentiometer.

@foxezekiel786 3 жыл бұрын

You prolly dont give a shit but if you guys are bored like me atm you can watch all the new series on InstaFlixxer. Have been binge watching with my brother for the last few days =)

@derricktrevor3664 3 жыл бұрын

@Fox Ezekiel Yea, been using Instaflixxer for since november myself =)

@bestfield372 2 жыл бұрын

I got vision sensor connection error in goggles after a 10 foot drop on grass. Is it a fix if I just replace the front sensor part? I no wizard can u help

@ITSROBFPV 7 ай бұрын

Hi mate do u do repairs im in liverpool and not so much repair but fcc unlock as my penetration is terrible ???

@JensEser 2 жыл бұрын

At what time are the sensors such as the Barometer?

@Frodokeuh 3 жыл бұрын

if DJI come up with toolless repair it'll destroy the FPV world xD

@oups8716 2 жыл бұрын

Hello, very interesting video. Can you tell me the different sizes of the electronic cards that are in the drone? Thanks in advance. Cordially.

@chrisbee5481 2 жыл бұрын

Do you know the motor stator seize ?

@kennycl8171 Жыл бұрын

so can you tell me the VTX please

@JonRatzlaff 3 жыл бұрын

Could you do a DJI FPV controller teardown? I dropped a screw inside the controller and can’t get it out. I can’t figure out how to disassemble the controller.

@ddegn 3 жыл бұрын

I replied to another comment but I'll also reply to increase the odds you'll see it. I took my controller apart. It wasn't has hard to do as I feared. There are four screws holding the controller shell together. After removing these screws the controller shell can be pried open. I've uploaded photos to my Hackaday IO page. I use the same user name there as I use on KZfaq.

@mortonbeard2240 2 жыл бұрын

What tool is that in the beginning?

@madforit9661 2 жыл бұрын

What video system is used in this drone, air unit? Cheers are you based in Liverpool?

@mccheesethemerciless6052 2 жыл бұрын

I need that top metal piece at the 2:20 mark. Anyone know the name of that part and where to order it? I’ve scoured the DJI site, ebay, and every other drone parts site. This is the only piece of this drone I can’t order!!!

@OneOfTheRobs 3 жыл бұрын

You are my hero!! Without you I could not have done this. Unbeleavable that this video does not have 100k+ views. Its the only true good teardown.. Thank you SO SO much. I'am waiting for my spare-parts to arrive (middle main frame, and 4 arms). What do you advise I use to stick back the fan? A little glue? Or if tape, then witch one? Again, I can't thank you enough. I can fix my own dji quad now. Rob from Amsterdam. (I SUBSCRIBED)

@matix3- 3 жыл бұрын

Rob were you able to get it working again? I too had to replace 3 arms. I noticed from this video that when he turned it on the props did not move in the front during startup. My are doing this right now and I am getting a esc error. hope you got yours up and flying again

@OneOfTheRobs 3 жыл бұрын

Hi Oscar. Mine did fly but no camera-feed. So proberbly broke he camera. Also, when I put my sdcard in the quad it doesn't see it. So proberbly a motherboard fail too. I can only fly it line of site :-( ... I'am saving-up fot a new one now so I can keep thus one fir parts. Almost got it working I guess.. Google luck with yours. If you need any help, just let me know if i can do something 👍

@LuisGomez-mf5ho 3 жыл бұрын

I wonder if someone car replicate the casing... perhaps in aluminum... def would sell

@PetroshellyShots 3 жыл бұрын

is it possible to remove the frame of the battery because ive noticed there are 2 screws

@guscruz9310 3 жыл бұрын

My DJI FPV took a swim in clean water. Which part might I need to replace? It won't turn on right now.

@borderlessniko 3 жыл бұрын

can you make a video putting it back together and flying it , highlighting any issues you'd come across , subbing incase it happens

@stoya2s 2 жыл бұрын

Can anyone tell me what is the minimum amount of disassembly needed, if I only want to replace the vision sensors module and ribbon cable?

@brianbrown8766 2 жыл бұрын

What tool dam it, lol. Answer please

@citabriaable 2 жыл бұрын

Great job and well laid out. I have a question, though, after a recent crash into a small tree, a 1/2" piece of the limb just gouged the gimbal, locking it in place as it hit the grass...requiring some delicate removal. The gimbal "appears" to still work, but when flying today I noticed some choppiness in the video where the gimbal kind of stuttered and the video jumped. In your estimation is it likely I've damaged the gimbal and should replace it. Reason I ask is the FPV reading I've done says the gimbal should keep the video rock solid & stable in all orientations and speeds ?

@crisnmaryfam7344 Жыл бұрын

Could be damaged it, could be it has crud in the mechanics of it. Ive seen this in other peoples videos where they crashed into dirt or sand and then the gimbals movements acted up. A can of Compressed air (air duster) could be your best friend in these situations.

@ckkdfocif 3 жыл бұрын

this is how you fool customs lol

@DawidMore 3 жыл бұрын

What screwdriver are you using?

@matthewheath45 3 жыл бұрын

What tool did u use at the beginning

@dronedrop-off5955 3 жыл бұрын

Just a precision electric screwdriver there are quite a few different types. The one used in the video is a Xiaomi WowStick F1 I think. It might be the f1+ though.

@demiserofd Жыл бұрын

Warning to interested people, this drone is VERY fragile. It's made of plastic, not carbon fiber or anything else strong, and in particular, the landing gear and arm mounts on the body are barely there. Mine fell from about 4 feet up and broke both the landing gear AND the arm mount clean off the body. Add to this expensive repair costs, and this is not a drone you want to crash willy-nilly unless you are willing to fully disassemble it like he does here and rebuild it from the ground up, whenever you have a crash.

@LetsGoBrandon_ 3 жыл бұрын

This is worse than replacing a glass on a cell phone. Mad props for showing this ...

@Blueskyver 3 жыл бұрын

Great disassembly. Can you please do one for the controller, the goggles, and the controller stick? I'm subbing.

@ddegn 3 жыл бұрын

I have photos of a teardown of the battery and controller on my Hackaday IO page. Just search for my name there.

@Blueskyver 3 жыл бұрын

@@ddegn Thank you; can you please provide a link to that webpage with the photos.

@ddegn 3 жыл бұрын

@@Blueskyver I'll add a link in my next reply. Often times links will cause a comment to sent to the spam folder. The site Hackaday(dot)io is a place where people can share their projects. It shouldn't be hard to find my project by searching for my user name on the site. I'll try adding a link to my next reply.

@ddegn 3 жыл бұрын

@@Blueskyver The link didn't work here are some more key words to make it easy to find. Project Number: 178299 Project Name: DJI FPV Investigations Sorry I can't link to it directly.

@Blueskyver 3 жыл бұрын

@@ddegn Thank you very much. I did not know that site. I was able to identify it now.

@carlosdiaz1498 3 жыл бұрын

the compass where it is located? is it possible to replace it?

@magiereichel 2 жыл бұрын

u mean the gps?

@massimocapone1014 3 жыл бұрын

Hi, I broke the left front arm of the DJI FPV Drone. Apparently, even though just the plastic broke and the LED light inside the arm, DJI is requesting about Euro 189,00 to repair it. Is this normal?

@jimbalo74 3 жыл бұрын

i get the same issue, left front landing gear only broken, not even the plastic part, but the board inside (LED part) and the cable to attached to the LED control. seems that antena and coax are nice, not sure if need to be repair, but i asked.