Humbled! It's magic fo sho! Really glad to hear its working for you. Thanks so much and keep wipping those trees!

Yes sa!! Thanks so much Jansen. Appreciate that love. Been breaking stuff a long time haha. Have a good one.

These are facts! Haha. Great minds think alike is what I say. Thanks so much Mountaineer! Have a good one.

These are facts big dog. Same same. Thanks so much and have a great day!

You can use this setup for Vista too! Awesome builds man. Thanks so much and have a good one!

I’ve yet to break one. Some have they tell me. Guess I’ve been lucky. Running strong so far. Thanks so much my friend!

You can use them for analog or Vista too. I did. Thanks so much FPVSlice!

​@@PhantomFPVwhere ya been dude I'm missing the phantom vids

Awe yeah! Time to make that switch! Haha. Thanks so much Mr Magoo! Stay fly brotha.

It’s helpful with other stuff to

What’s mine is yours big dog! Glad you’re liking the O3. Thanks so much and have a good one.

It's coming big dog! Had to take some time off. Thanks so much and Happy New Year!

Me too! Haha. Thanks so much Kestrel. Got any recommendations for the next?

@@PhantomFPV can you show how you actually mount the camera? I mounted one in my source one frame with the double sided tape but you must be mounting both plates outside the frame, with the tape then place the camera and side plates on the frame?

Yes you did! Need you as my primary camera man! Haha. Thanks so much Dad! Love you!❤️❤️🦄🦄🦄

Yeah man, you know that’s right. Better get hot haha! Thanks so much Toronto FPV!

Haha! It was a great recommendation big dog! Thanks so much. You never really know who needs help on what. Hope you have a great week buddy!

@@PhantomFPV thank you!! ✌🏼got an apex evo today will buildt one and compare

Tape is great! But you hit hard things fast too so double is better than nothing. Thanks brother man, hope the family is healthy and happy!

You’d love it. I’m rocking mine still. Haven’t broken any yet. Super clear too. Oh, and ALL the latency as you can tell hahaha! Thanks big dog!

I’m still rocking the V2’s. It’s a baller camera setup. Yeah, I lost my best run too. Sucks. Thanks so much Austin! Killer edit on that power loop!!!

Thank YOU MC’s for the love and support. That tape works for me. Thanks so much and stay safe as well!

That’s excellent feedback Der-v. I’ll look those up. How’s the build coming along? Thanks so much!!!

@@PhantomFPV finally managed to order an ultra last week! 👍

Thank you my friend! Glad to eat it was helpful and that you’re already implementing these techniques already. I hope you have a great day as well!

@@PhantomFPV hello sir! I took the screws out of my Geprc Mark 5 to adjust camera angle of O3 unit, I set it as I wanted, now I wanna put the screws back ( they are all exactly same, 4x ) and they just stuck half way??? Like I can screw them back in just a little bit and then they both stay in the same spot leaving like 3mm gap to the actual drone. I tried to push a bit heavier but no help and also don’t wanna try pushing really hard and break the camera lol. What is going on? Please help me I beg you I’m losing my mind I got this drone 7th day now and I still wasn’t out flying cos there is ALWAYS a problem. I just finally charged my bats, set everything on Beta Flight and now this💩. Omfg…. please help 😞

@@NONSENSE_EXPLORER Merry Christmas! Is it safe to assume you replaced all the TPU or spacers for mounting the camera?

@@PhantomFPV I was out today, had a nice trial flight, landed fine ( as I was maybe half a meter above the ground I double clicked my disarm AUX 4 button ) and it did cut it off -> the drone dropped down fine but then as it dropped and was on the ground it was still all shaky with motors running like it’s ready to take off any time again O.O I was like what the hell… I kept pressing disarm button twice multiply times, but I only could see “Motors started” every time I was trying to do that, would never see “Motors stopped” notification -> THEN I wanted to see if it’s gonna go up again and it did as expected but it also flipped in the process so now it’s upside down - I again tried to disarm multiply times as it’s flipped, then of sudden the motors start reving like crazy, I tried to disarm one more time ( exactly same way as the entire time ) and it finally stopped… I could hear motors sound fading away and finally ve seen “motors stopped” notification popped out. Why did that happen? Whats the problem? It must got “disarmed” mid air when I tried to disarm for the first time, but it seemed or felt like as soon it touched the ground - the motors went back on... It literally cut the power, dropped down as if it’s off, but the motors were still running and it took me about 10 attempts of trying the same thing( double clicking AUX4 which is my disarm button ) but it wouldn’t go off, till it finally did. Why it didn’t go off right away?!

Missed you too brother! We back!!!!

Gotta go with what works for you. I’ve not flown the Evo because is still have a few HD’s left over. Maybe one day. Thanks so much!

Yeah man, that glue will save your ace! Glad it’s working for you Flanny. Killing it bro! I know I already said that but you are! Stay in it! Thank you sir!🦄🦄🦄💸

Hahaha! Na, quads were made to abuse. Go getchaself some!!! Thanks a bunch .

These are big facts! Thanks so much.

Thanks for watching! Have a great day.

Appreciate the love big dawg! Hopefully something will drop soon😉

You’re very welcome Sully! Hope you’re doing well brotha man! 😉💸💸🦄🦄🦄

Thank YOU for watching! Have a great day.

Haha! Yes sa! Ripping ALL the packs on it. Hope you’re doing well GLOOR fpv! Thanks so much and I hope you’re doing well.

Yo!!! Dizzy! Thanks so much for the love and for checking in. How the heck have you been. Sorry to have ghosted you big dog. Hope the holidays were good for you.

@@PhantomFPV hey dude sometimes life gets in the way......but I miss watching all your content because it totally inspires me to push harder. You know your one of the goats in this hobby. Hope your holidays were awesome homie......later

Welcome to the wild side my main man!!! Haha. Awe yeah, got to be good! Thanks so much Noisy.

These are all facts! Yes, I run the runner standoffs. Have with great success for about 3-4yrs now. Thanks so much John!

Hahaha! Yes sa! You know I'm down! Stay fly Grambo!

Awesome! Welcome to the hobby. Jump on the simulator to skill up fast. I've got some beginner tutorials in my Playlists you should check out. Thanks so much!

Do it! Haha. You can use this method with the Vista. Thanks so much my main man!💸💸🦄🦄

I definitely get what you’re saying. Out of 10 pilots you ask, 9 will say I’m doing it wrong. However, I’m a basher pilot and fly more packs than any normal human should, and likely more than those you ask about proper stack assembly. That being said, I don’t have an issue with the plastic nuts coming loose. If you’re careful, you can actually get them pretty tight. The nice thing about an Apex frame is those four screws have zero structural function. So they could literally be flopping around in there and your frame would still remain tight. So long as you built it properly. I fly with badly bent motor bells, bent props, broken everything and my tune is still magical. If you’ve watched my videos, you can hear it. It’s this way because I pay particular attention to how I mount my flight stack, and I tune my quad. Again, 9 out of 10 pilots will tell you it’s wrong, but my tune will confirm otherwise. (I’m kidding about the 9 out of 10 thing btw haha.) I’d suggest trying it. You can always revert back to the original mounting method. Both will work. I hope that helps a little. Thanks so much big dog! Let me know if you have any more questions.

@@PhantomFPV thank you! i will make two apex evo builds try the second with the nylon nuts as well :) can you tell me how you tune your Kiss ultra Setups? Is there any tutorial that you follow or how can I understand that aspect? Thank you so much for always taking you time! love it

Direct to 6s with a cap on the ESC. I also run spike absorption. Thanks so much my friend. Oh, check out my video from a few months ago called building a bomb proof quad. I cover everything in there.

@@PhantomFPV thanks man! Watching it now.

Completely agree my man! I’ve yet to break an O3. Only trashed the cable. Appreciate ya big homie!

@@PhantomFPV if u cant break it.. lol

Booya!!! Supa glad to hear that FLYZONE. Thanks so much for the love mang.

Not a newbie question at all. Yes, the Vista is still baller. I used this exact method with my Vista’s as well. Thanks so much!

They’re the Zip POPO Pros V2. The newer Zips are not as strong. Thanks a bunch big dog!

Yes sir, that’s correct. I don’t bolt in the cam. Everything is taped. Glad that’s working for you. Once I find something that works well, I rarely change it. Thanks so much my friend!

Big dog Belt! Thanks so much for the love. hope you're well too man!

The lighter weight camera makes a huge difference. The actual camera performance is lower than GoPro tho. I’ve got too many standard Apex’s to switch. I don’t bolt my cameras in either so it’s really a waste of money for me. Thanks a bunch my friend!

Slide it back away from the nose. This is one of the reasons I tape mine in place. Hope that helps. Thanks a bunch!

Hahaha! They approved! Thanks so much TrueFPVblood. Hope you’re well brotha!

@@PhantomFPV 😜👊👊😎👍

It’s really thin. The 3M VHB foam 15# grey double sided tape. Thanks so much my friend!

I am. I tie the power to an ESC pad which has a cap one it. Thanks so much my friend!

@@PhantomFPV 👍🤘

I've tried it and went back to E6000. Shooters choice really. Gotta run what ya brung. Thanks so much Digital!

@@PhantomFPVok, i was just making a recommendation for other builders, i kinda just yell out things and don't explain myself well... your a beast of a pilot and go through alot of parts i couldn't afford, I'm disabled so I'm very poor and very low income, i buy lower quality parts like skystars, jhemcu, lannrc, emax, brotherhobby and such, usually and got to get them to last, I'm a shitty pilot due to my disabilities though, but i love building along with flying, i build alot mostly for friends or to sell to support my addiction to the hobby, lol, i need to reuse as many parts as possible so i have take stuff apart frequently on my builds cuz i just buy $20-30 frames and $3-10 motors usually, thats why i recommended the removable type over e6000, gorilla grip is same thing as e7000 just easier to find at the store, they're just easily removable then e6000 and softer and stretchier, I've never had anything come apart prematurely using the removable type, i also use alot putting it all over my wires and edges of the boards and such to protect the electronics as much as possible to help them last, i just make sure not to use it on the chips that get hot so the heat gets let out, i go through a while tube every few builds, i also like that the removable dries in a fraction of the time, sorry for the rant, was just explaining why i prefer it for other builders that may see this...

I have not but some folks have recommended one I plan to test. Such good range on stock, haven’t felt the need to tho. Thanks so much!

Apex 7” HD. Thanks so much for the love!

Thanks so much, and you're very welcome! Not sure on breaking more parts. I've only flown the HD Apex. Figure they'll be on par with each other. Stay in it!

No sir, I have not. I do have some with sand etching tho. That’s been the worst. Still running that cam tho. Funny story, that particular camera was etched from my very first ever O3 flight haha. Thanks brotha man! Hope you have a great day!

I miss you too!!! Some tips will be coming up soon. Had to take a break to realize what I was missing. Thanks so much for checking in.

Na, I run the GoPro cam at 20* and the flight cam at *40-45. Hope you’re well brotha man! Been a minute. Can’t go slow!!! Thanks big dog!

I’m around! You’ll start seeing some stuff real soon. Thanks for checking in and that love B! Sending love back. Stay up!

@@PhantomFPV Roger that! Summer been keeping my thumbs tied but meanwhile I always check in every couple days for a hearty dose of inspiration. Have a good one bro, see you soon then! “I’ll Be Back” - Arnold Quadzenegger

Yes sa! Coming up real soon. Thanks for that love, and tell your friend I love them too!

Apex HD for me. I tape my cams in so the Evo doesn't do anything for me. Thanks a bunch!

Fingers crossed! Thanks so much my friend.

3M 15# VHB foam double sided grey adhesive tape. Thanks so much my friend!

It does but the sides will hang off the back about 1/8th of an inch. Thanks so much my friend!

@@PhantomFPV I will probably get the Evo kit. I first need to get the goggles and the O3 lol.

I run the DJI Action, yes. Thanks a bunch big dawg! Have a great day!

What it DOOOOOOOOOO!!!