DJI O3 FPV System - Complete Setup - Diagnostics & Troubleshooting Guide

Рет қаралды 66,709

Күн бұрын

DJI O3 Digital FPV System setup, diagnostics and troubleshooting Guide.
We make FPV,Drone and electronics related videos.
*** Support Us To Keep Making Drone, FPV & Electronics Related Content ***
== Support Monthly On Patreon - / madrc ==
== Buy Me A Coffee - www.buymeacoffee.com/Madstech ==
== Paypal Donate - mad_rc@icloud.com ==
== Join My Discord Server - / discord ==
Time Stamps
00:00 Video Overview
01:05 O3 Power Requirements
01:46 USB Power ?
02:31 Power Issues & LED
03:39 Wiring Harness Warning
04:27 Power Issues On Arming
05:09 Power Summary
05:26 Binding Goggles Requirements
06:58 Binding Process V2 and Goggle 2
07:40 O3 Binding Summary
07:55 O3 Flight Controller Wiring
09:24 O3 Betaflight MSP OSD Config
11:11 O3 MSP Working Properly ?
11:49 O3 MSP ODS Issues & Diagnostics
14:38 Betaflight Config Diagnostics
16:31 DJI O3 Betaflight OSD Summary
17:41 Range & Performance Issues
18:16 O3 Low Power Mode & Arming Checks
20:00 Am I in CE OR FCC Mode ?
21:21 Antenna Checks
24:44 Summary
** The following companies are supporters of the channel and we would not be able to make drone, electronics and FPV content without them. **
www.3dxr.co.uk - The Cube Autopilot & Drone Related Products
cubepilot.org - Cubepilot Autopilot & Accessories Website
========================
Review & Business Enquiries:
========================
If you would like to work with us on product or service you have please email us on mad_rc@icloud.com
Business Enquiries & Consulting - We have huge amount of experience in emerging technology and unmanned systems, we offer both in-house technical services and consultancy, if you would like to discuss how I can help you please email mad_rc@icloud.com
================
Social Media Links
================
Follow On Twitter: @madrc1
Instagram: ian_mads_tech
Facebook: / themadrc1
=== All music licensed by either ===
Bensounds - www.bensound.com/royalty-free-...
Harris Heller - Stream Beats - www.streambeats.com/
#FPV
#DJIO3
#Drones
#Freestyle
#DJI
#Mavic
#UAS

Пікірлер: 230

@MadRC Жыл бұрын

Here are the links to some of my other videos I talked about in this one DJI O3 FCC Hack - kzfaq.info/get/bejne/m8yGg9hjr7G-gI0.html DJI O3 Vibrations Issues - kzfaq.info/get/bejne/ppmHl86Fst7Qhok.html DJI O3 Complete FCC vs CE RF Guide - kzfaq.info/get/bejne/aJdza5OEzru7inU.html DJI O3 Harness Warning - kzfaq.info/get/bejne/mt2CZ6V6zczcpKs.html DJI O3 How Hot Will It Get - kzfaq.info/get/bejne/m52Tfq9ospvFg4E.html DJI O3 Teardown - kzfaq.info/get/bejne/sJqkhL2eytyppKs.html DJI O3 DJI FPV Remove V2 Setup - kzfaq.info/get/bejne/qsuCZ7ZqvN7adYk.html DJI O3 Power Requirements - kzfaq.info/get/bejne/edKRqdGds5yaY40.html I hope you have found this video helpful .

@PookaFPV Жыл бұрын

Sussed it out. it was the connection cable. It was not putting enough power through to be able to bind. Would light up the turn off. Tried with another cable works perfect. Thanks for the help man and this video. Hope your well cheers J

@PhilippZ Жыл бұрын

Thank you for the great guide. I'm still looking for a guide on how connecting the O3 to a TBS Crossfire transmitter. I have the TBS module for the Taranis X9D.

@PookaFPV Жыл бұрын

@@PhilippZ you won’t be able to connect it directly. You will need to get a nano or similar and connect that to the transmitter.

@tangodown66645 11 ай бұрын

I spent days trying to find the solution to my osd problem. After watching your video my issue has been fixed. Thank you!

@cusglider Жыл бұрын

Thanks so much for your work. You made my day. I had partly DJI OSD, permanent low power mode and no recording. Thanks to your simulation I could replace the falty grey wire and will get airborne now. THANKS!

@Quad_Father Жыл бұрын

Mr Steele mustache man should watch this. He was complaining of the feed whilst in low power mode. Even in this video you can see it was choppy and then you armed and was buttery smooth.

@DanielNavarroJr Жыл бұрын

Steele needs to watch alot of things, lol. Stuck in 2018.

@s.flying1022 Жыл бұрын

I saw the same thing. You can clearly see 7mb/s in 1 set of goggles and 50mb/s other. I don’t know how you miss that trying to make a comparison unless you know 0 about how these transmissions systems work. And I don’t know how you get that far without knowing anything about how they work either.

@POLARISFPV Жыл бұрын

@@s.flying1022 easy, you always fly anolog

@MrCoffis Жыл бұрын

He said that even when flying it’s choppier than the v2.

@Smagsfpv Жыл бұрын

Thanks @Mads Tech , couldn't get my OSD working,your video fixed it 😊

@dnn79 3 ай бұрын

Thank you so much for this video. You’re the only one I could find that explains everything clearly and I appreciate the troubleshoot segment. No one warns us new user about tue possibilities of the wiring being wrong, which was the case for me. DJI harness had tx/rx switched. Explains why I could not get OSD to work.

@allgaming4045 11 ай бұрын

Lovely work Mads, Thanks for All The help 😊

@dudebroski9460 3 ай бұрын

Running this in a baja 5b truggy. Using a spektrum dx9 and a 636b receiver with the steering on the rudder and the camera on the elevator and aileron channels so that I can look around while driving. This video made it pretty much painless to connect. Unless I was told to I would have taken forever to figure out the settings change in the goggles. Thank you. Liked and subbed

@fespinosa434 5 ай бұрын

Thank you for explaining. Very well done!

@pianomans1 Жыл бұрын

Another awesome video!! Thank you!

@baggszilla Жыл бұрын

YESS!!! Thank you for this Ian!!!

@RCwithAdam1 Жыл бұрын

Thanks so much. the OSD info really helped!!

@offtheground9152 Жыл бұрын

Great Info, thanks Ian

@PookaFPV Жыл бұрын

Great Vid Ian, still not had time to look at my binding issue. To busy packing boxes. Hopefully I’m just not pushing to right button 😂. Will let you know man. Thanks Ian always super helpful mate. Thanks Justin

@022fpv Жыл бұрын

Thank you very much from Brazil

@33narim Жыл бұрын

great work. thank you.

@hanfpv3093 Жыл бұрын

This was perfect! 🙌

@emptyqrider 2 ай бұрын

Very helpful 👍🏻 Thanks & subscribed 🤚🏻

@cambellgrey3079 Жыл бұрын

Nice work mate! Could you do a video going through camera settings etc and best you have found and the differences. Cine vs just everyday FPV flying. Thanks and keep up the great work!

@TavoFourSeven Жыл бұрын

Very much appreciated big dawg. Whole othe point though you should spread the word however you can. Basically flite test is trying to raise the 250g to 1kg. They posted last night on their CBO channel I think. And I'm just trying to make sure you big view guys are also aware ASAP.

@PookaFPV Жыл бұрын

Thanks

@PhilippZ Жыл бұрын

Thanks!

@cgwclimber Жыл бұрын

Just want to say thanks! Finally upgraded to digital, which is excellent - that said, I broke off the small (IPEX?) connecter as I was removing a part of the frame… you mentioned it could be replaced with standard antennas - just curious where they could be purchased - or what length and type are considered standard. Thanks again!!

@Flying_Wild_Boar Жыл бұрын

Just want to say thanks😊

@raptr49 3 ай бұрын

Great review. I just returned mine as I fly INAV 7.1 and found the OSD to be almost useless. I simply could not get a descent layout as the presentation in the goggles did not match even remotely the layout in the INAV OSD setup screen. I have several Caddx and Runcam units which work perfectly with WTFOSD. So my plane is to eventually go with Walksnail Avatar instead of going down another of DJI's rabbit holes.

@MoeFPV Жыл бұрын

Mads, I need you to brave the horrible weather and test that 90 FPS CAM OK I'M DYING TO HEAR IT 😘

@bretttaylor225 11 ай бұрын

This just saved me a huge headach

@Streetreaper89 Жыл бұрын

great video and very helpful!! i just got the o3 air unit for my rc planes. im in market for goggles now but i was wondering if i need a flight controller for o3 or if it would connect to Spektrum Air Receiver??

@quadthingcopter5984 Жыл бұрын

HI. Are the settings for sharpness and noise reduction only available for the newer dji goggles two, as the settings are not there on my dji v2 goggles? thanks.

@tbd6403 Жыл бұрын

I set mine up with the HD osd just the other day and it appears to be working correctly for me.

@Smagsfpv Жыл бұрын

@Mads Tech do you know of a preset for betaflight 4.3 if I'm using the 03 air unit with the DJI controller? Supafly is only 4.4 I believe, at least I don't see one for DJI remote only one with the options for crossfire and ELRS etc.

@smithyrtd Жыл бұрын

Great video, thank you. Just out of curiosity, do we know if having all of this power, does it have any adverse health issues on our body, especially the brain?

@jaredlaskey 11 ай бұрын

Quick question. Running the Mobula8 with DJI 03. Throttle, Pitch Yaw and Roll all respond in Betaflight. But when I arm the drone to fly only Pitch, Yaw and Roll work. Using the DJI remote 2. Do I need to adjust the thresholds in the receiver tab or something?

@youlupukki Жыл бұрын

How were you able to connect o3 unit to the Betaflight configurator? Can't make it. Even though it is set to com7 port in system.

@diverFPV Жыл бұрын

Very nice video. I know that this is a guide for betaflight , but I wonder if you have any idea for inav. For now , inav has not OSD support . But when I arm the quad , it exits from low power mode and starts recording. The problem is that I have 0 Volts in my V2 goggles for the battery of the quad and the signal is weaker from the previous air unit. Is it possible that this msp behavior , affects the strength of the signal , or from the moment it exits low power mode is irrelevant ? Thanks in advance

@odinofanchin9281 Жыл бұрын

Hi boss, many thanks for your fantastic guide and tutorials, I have an absurd problem with my two new dji O3s: I have two Kakute H7 fc mounted on two of my 5" freestyles, the first is a H7 V2: when I connected it to the O3 the fc is dead, it is no longer powered by usb or from lipo, with the second fc which is a Kakute H7 V1.2, if it's connected the plug to the O3 air unit, the quad does not arm, I see in my dji V2 the image from the cam but the quad does not arm: I checked the connections between the fc and the O3 air unit several times and they are correct in both cases: what can I do to solve it? what could be the problem? many thanks

@DJAndrews83 4 ай бұрын

Hi, thanks for your great videos. in Italy I didn't find any results for my problem with the unit03. mounted on a geprc20, during a flight it was disconnected and from that moment when it is powered a green LED remains flashing, and in addition to not seeing anything on the integra it doesn't even connect to the PC. do you know what it could be?

@peek2much3 Жыл бұрын

This absolutely the best guide to date on this new unit. I do wonder if DJI will enventually license/allow RunCam to produce their own branded units given that Caddx has gone the way of the TREX.

@hombredelfuturo_888 Жыл бұрын

Do you think there is a way to use dji fpv controller 2 with crossfire reciever? This would be awsome to prevent looseing signal

@markscreeton3189 4 ай бұрын

Hi - great video - do you know if this can be fitted to a DJI Avata ? thanks

@PabloVillaVideo Жыл бұрын

I currently have the vista set up on my FC, but I am getting the O3 on monday. Assuming all the wiring is correct, and assuming I don't personally have a need to add anything from betaflight's OSD at the moment, shouldn't the DJI OSD theoretically come up on my goggles as soon as they are bound together, without any presets in betaflight?

@TheHelicapt 6 ай бұрын

On the latest Betaflight...does the VX(MSP) still need to be selected to work OCD etc for DJI 03 ?

@user-tq2hb3tz4t Жыл бұрын

Thank you for this video! The flight controller and dji o3 have different connection terminals. In the video, you have a cable that fits perfectly to the flight controller. Where can I get the cable from the flight controller to dji o3?

@AZ_LoneWolf81 6 күн бұрын

hey there i found your channel recently so much good info as im very new to the hobby. ive finally got everything pretty well dialed. is there a way to get a DJI o3 air unit to goggles signal strength represented in the OSD i just got a bit of trouble watching the goggles signal strength as the native OSD icon is small. thanks!

@Renzostyle5 Жыл бұрын

Hey Ian, I just bought the goggles 2 and updated it to the latest firmware and I also did that with the Caddx vista I’m using. When the quad is not armed I got 6mbs and when I arm it goes to 47mbs but when I arm and before I see the 47mbs I got a 0.5sec black screen like a black screen. What is this? Thanks already!

@rotormasher Жыл бұрын

What's the best FC for the o3 on a EDF plane guys? Thanks

@paddlesworthrcpark8215 8 ай бұрын

Hi there hope you can help I've powered my 03air with a 2s lipo the wires are solder to the fan wires and the plug plugs into the lipo it all works but won't record to the micro sd in the border it trys but then says low power mode activated won't record and It drops signal for about 5 _8 seconds then comes back on any ideas many thanks

@slabcharger7162 8 ай бұрын

im lost if i have a rushfpv analogue blade 722 fc. with 5v 5a bec can i solder it using that or can i use the vcc .using a 6s

@NaorFPV Жыл бұрын

will you open the o3 antenna plastic cover. love to know how to check inside.

@myfpvshots 6 ай бұрын

I have V2 goggles, i bound of one of my quad and changed to second quad and bound. When i use my 1st quad again, do i need to rebind? Thank you for answer

@lukeohora Жыл бұрын

This Information is so useful!!! Thanks! I would love it if you found away to get the air unit to perform at max without the use of a flight controller as I am using it in an RC plane.

@MadRC Жыл бұрын

Sadly no, I have asked DJI for an update to resolve this but they never replied.

@highestvirtue1892 Жыл бұрын

Hi is it possible to attach this to a RC car without a FC and just power it from the battery balance lead? And will it bind with the DJI google2 automatically?

2 ай бұрын

can I just connect positive and negative from a Bec to run the O3 with my integrate goggles if I'm putting the O3 is an RC plane?

@avicennaalkhawarizmi493 10 ай бұрын

thank you so much for this information. i have a problem when flying my quad, DJI O3 air unit stop recording while lost signal connection with Goggles 2, but the goggles not stop recording until i disarm/finish flying. why this happen? thank u so much....

@Jan-nd1hv 10 ай бұрын

Hey Mads, i just wondering if that unit can be record without flight controller? 'cause i think maybe could be use as bikers tiny vlog camera

@bstabio Жыл бұрын

FOCUS ISSUE!! Is there a way to focus the 03 Air Unit? Our is only focused at extreme close and I do not know how to get it to get the focus back to far for flying. Thanks!

@quadthingcopter5984 Жыл бұрын

Hi, not found any info of flying my 03 while others are flying vista and the old air unit, no option to drop to 25mw, and are the channels different? Flying today with 03 while someone flying vista, I was on channel 3 he was on channel 1 seemed ok for a while then his picture blacked out.

@ClarkDroneFilms Жыл бұрын

Hey do you know how/if OSD can be viewed in the DVR?

@lynxfpv 4 ай бұрын

Anything I can do to get osd for the 03 au with goggles 2 on Betaflight 4.3?

@divingfalconfpv4602 3 ай бұрын

Im in USA and just found out my O3 is stuck in CE mode after watching ur video. I activated using same account i do all my dji fpv stuff. I have goggles V2

@SK.SHAHED Жыл бұрын

the mamba mk4 f740 aio power the o3 air unit directly with vbat.... is there any over heating or risk by doing that......the aio also have a tvs diod protection for safety ..... or i need to cut the wire and add a bec for safety...... please help.. i am a little bit confused

@pascaldetournay7540 9 ай бұрын

hi , is there a chance that dji O3 could get the osd on the dvr with the google V2 ?

@MountaineerFPV Жыл бұрын

Hey Ian, the OSD capabilities on the OS3 do we know how to get OSD to display yet on DJI goggles?

@MountaineerFPV Жыл бұрын

@10:30 thanks Mang 👊🇺🇸🔥

@BNIRc Жыл бұрын

I got the 03 mode in my Goggles V2 , but I have no way to adjust the power in mw , range seems fine🤔. Also when switching to air mode on my new iflight there's no air mode weird , but flys great lol

@andifu1630 Жыл бұрын

when low power state is gone after armed, that gonna shutdown automatically?, because i already get failsafe 2 times because of automatically disconnect, its like overheat on dji o3 unit, but just flight 1 half minute

@christopherconkright1317 Ай бұрын

Do you mount the O3 with double sided tape? Why are there no mounting screws

@sethvane669 8 ай бұрын

Very helpful video. Thank you for your efforts to make this subject more understandable. I followed all the instructions, but even though my Goggles 2 are binded to the O3 Unit, when I arm still it does not start recording automatically, I still need to go to the menu of the Goggles and select record from there.

@TheHelicapt 6 ай бұрын

I have the same problem. whats the solution ?

@sethvane669 6 ай бұрын

@@TheHelicapt I figured out. In my case I was plugging the USB C cable to the O3 Unit and was thinking that I can make it work that way. But only with the cable not enough power goes to the unit. You need to attach a battery to your quad. You can only bind with while on USB C cable, but you won't see it on the Goggles. Use a battery on your quad and it should be working. Don't forget to remove the props on your quad before that. Hope it helps

@TheHelicapt 6 ай бұрын

@@sethvane669 thanks

@austbost80 10 ай бұрын

Great video. Subbed. I have bound my remote 2 and goggles no problem but there is no response on the receiver tab on betaflight? any ideas?

@Todd_G_FPV 6 ай бұрын

Did u get it working? Trying to make a wing myself with 03 unit and my v2 goggkes and rc2 remote but not clear if the remote will work, I know it does for a drone but not a wing

@runpuppyfpv5744 Жыл бұрын

Why is my 03 au only recording bitrate and delay and nothing else also I have the iflight chimera 7 pro V2 worth the 03 au should I direct solder the au directly to battery power

@goneviral6037 8 ай бұрын

How do you connect it directly to a battery, if want to use it on an Rc truck?

@SunriseWaterMedia Жыл бұрын

Do you have a guide showing the actual frequencies that the stock O3 air unit uses? A friend and I were flying at 20MHz on O3 channel 3 (5839.6 MHz I believe) and Vista unit at 50 MB/s on channel 1 (5695 MHz). I thought these two frequencies would be safe from interference, but we were both getting terribly glitchy pixelation. We decided to throw logic out the window and fly on the following: O3 air unit: 20 MHz channel 1 (5768.5 MHz I believe) Vista unit: 50 MB/s chanel 2 (5770 MHz) On this second flight, we had absolutely zero pixelation or interference. Nothing else changed (we were flying in the same location, the same distance apart, etc.) Based on what you said at 21:18, it appears that our O3 air unit is in CE mode. I don't know if that factors at all, but I would like to know if there was a definitive guide on frequencies, because, based on my understanding of the frequencies, our test shouldn't have worked without interference.

@elmarirony5580 Жыл бұрын

Thanks for the great video. I have 1 question: If I delete the existing Ham-File from the Sd-Card and I restart the goggles V2, the powermode goes back/ less RF-Power? Ham-File must be always on the Sd-Card? Thanks a lot

@MadRC Жыл бұрын

No once it’s done it will stay till either you connect to assistant 2 or you reset the goggles to factory settings. You do not need to leave it on the card in normal use.

@LuckyPratama71 5 ай бұрын

Hi can you please help on setup dji air unit o3? I recorded video 6 times both in my goggles and air unit internal storage. I found exact 6 videos in my goggles but in o3 only found 3 videos.

@kidjjwills7693 Жыл бұрын

Hi Ian, I am looking to run a FPV unit on a go kart. Couple of concerns, would the stabilisation on the camera cope, or would it be too much vibration (fair bit of vibration) can I use the 03 unit & just power it up & bind with a onboard 2s pack. I have a DJi avata for flight with goggles 2, hoping to link from goggles to IPad for live feed screen. Any advice would be appreciated

@Todd_G_FPV 6 ай бұрын

This sounds cool, are u driving with goggles on or making a fpv rc gokart?

@organiccleanfoodconnection 2 ай бұрын

I purchased a flywoo with a 03 unit. And it shows up in the app but will not pop up the activation window. Any suggestions? Is there a way to look at my account and see what’s activated on my account?

@Graybear78 4 ай бұрын

You mentioned connecting the 03 camera wire connectors to a flight controller OR a power supply. I'm trying to use my 03 camera on a fixed wing aircraft that does not have a flight controller, only an ESC. Can the power leads just be connected to a battery using the power leads on the camera? I'm told that the camera goes into a low power mode. (.25) How does the low power mode still supply enough power to operate the camera at normal 'line of site' ranges? Can I use those power supply of a balance plug of the proper voltage? Your help would be greatly appreciated. Thank you.

@MadRC 4 ай бұрын

You can absolutely use O3 just on the battery with in its accepted voltage range with out an FC however it’s worth noting while you can turn off low power mode it’s still not full RF power and as such you may get reduced range. O3 Must have an Arming command from a flight controller to get full RF power.

@ClarkDroneFilms Жыл бұрын

I'm having issues binding my O3 - but it's worked before and I haven't changed anything or crashed. The V2s start beeping (binding mode) and the O3 red LED starts blinking (binding mode) but it never connects. Any tips?

@_test_test Жыл бұрын

sup man. ive gotta problem with googles v2 drv. its not showing gps coords in it, but googles shows this info

@brkfpv60 Жыл бұрын

"I am using DJI 03 and Googles V2, is there any way to record OSD information on the video?"

@bensusana1 Жыл бұрын

struggling to find the solution , i have betaflight osd but no dji osd voltge 0.0 with low power, but betaflight osd show all correct . i also try that on different fc with different cable same problem /;

@MatCron Жыл бұрын

The final guide we were all looking for, simply thanks !!

@fpvmar 11 ай бұрын

You mentioned that if air unit LED will not become solid red after plugging in battery it's most likely the unit is not fully powered. Looks like I'm experiencing that issue in my diy nazgul evoque v2 build. Brand new o3 properly wired but powering up battery make air unit led solid green - pairing button doesn't have any effect of course. My FC is Iflight Blitz mini f7 - and honestly can get my head around with this - you suggested some power switch, but can't find anything in BF.

@jacekkwiatkowski8332 3 ай бұрын

Did you find solution for this issue? I’m experiencing exactly the same with my brand new mark5 for the last few weeks

@sethvane669 10 ай бұрын

Hi Ian, thank you very much for your work and efforts to make this subject more understandable for beginners FPV pilots like me. I have question. I recently bought DJI Avata with Goggles Integra and FPV controller 2. I had some issues loosing connection and with the help of your videos I was able to switch to FCC mode using the ham file hack. I also bought the GEPRC CineLog 35 V2 PNP version and trying to use the same Goggles Integra and FPV Controller 2 to fly the the CineLog 35 V2 with the same set up. The question is if I update firmware on the Goggles Integra do I need to perform the ham hack again in order not to loose the FCC mode when I use to the Avata? Thank you again for your time and efforts.

@MadRC 10 ай бұрын

Yea you will need to do it again but only on the goggles. Just place the ham file back on the sd card and boot up after the update.

@sethvane669 10 ай бұрын

@@MadRC thank you so much for the fast reply and all your work to make this understandable for newbies like me 😊😊😊

@TechnicallyTom Жыл бұрын

While it’s true you can’t bind without the air unit receiving battery power, some things are powered just from USB. Mounting internal storage and SD card storage works with just USB and software updates also work with just USB. This generates much less heat because none of the wireless functionality of the air unit is being powered. This is the same on the Avata. When doing an update or using the air unit as a SD card reader, it’s better to not have a battery plugged in due to the reduced heat generation and it also eliminates the need to remove props for increased safety while performing these tasks.

@ccpitbull Жыл бұрын

Great vid as always. I have an 03 air unit, v2 goggles and controller 2. I can’t get rid of the country code error. I have refreshed the updates but still get the message. Also, I can’t access the advanced functions in the controller as they aren’t highlighted. And I can’t change from 16:9 to 4:3. Some strange stuff going on.

@prOkrEAt 4 ай бұрын

I can't either. Tried the DJ fly app to get gps even. Can't find a solution yet. Did you ever figure it out?

@josephshackleford1 Жыл бұрын

The O3 is great, the problem is I don’t want to buy essentially a new action cam every time i build a quad. Its so expensive for an already expensive hobby.

@Cinebon Жыл бұрын

Might be a silly question BUT I activated my goggles v2 and 03 in the US so should it just automatically be in the FCC mode?

@MadRC Жыл бұрын

Yea you should be fine.

@InfinityDrones Жыл бұрын

What will happen if you have 9v 1.5amp? What issues might you get? I've got a quad that's been working great on a Zeus F722 board. Thanks in advance.

@MadRC Жыл бұрын

It will likely be fine. If it’s working then don’t worry.

@InfinityDrones Жыл бұрын

@@MadRC Thanks. I have an 03 system that for some reason does not work in Gyroflow - When I add the video does the analysis and then the video is just black. If I disable stabilization the video is displayed again. Subsequently, if I enable stabilization again it goes black again. Yes, I'm using Wide mode, and EIS is disabled. Any thoughts?

@InfinityDrones Жыл бұрын

Here is a video of the issue. Hope someone can help. kzfaq.info/get/bejne/iZN0Z5Odyt68k4k.html

@user-cv4ml1sj7f Ай бұрын

my air unit wont arm and is showing MSP instead of arming any help please just built and spent hours trying to figure it out. thank you

@pedzsan Ай бұрын

Mine won’t arm either. Goggles show “BADRX”. Looking for answers too. Good luck. I’ll try to remember to come back here and update if I find anything useful.

@CC_FPV Жыл бұрын

I have a Nazgul Evoque with the O3 inside but it doesn't record on Arming! All OSD works fine. Any thoughts! Have not got a SD card in yet but it's set to internal storage.

@MadRC Жыл бұрын

There is a setting in the Goggles 2 for this. Under the camera settings and advance I think it is. It’s buried some what.

@CC_FPV Жыл бұрын

@@MadRC OK cool I'll look at that. The last two flights it didn't record on the Air unit just the goggles even though it showed as recording in the goggles. Reading other threads I think it may have been because I pressed record in the goggles before I armed and so in low power mode it didn't record. Do you know if you can set up a switch on the remote to start and stop recording (Tx 12) like the Avarta and the DJI Remote. I don't record every flight just parts of it and taking one hand of the sticks in Acro to navigate the goggles to record and stop isn't ideal!!

@jeffb5615 Жыл бұрын

I''ve been trying to get my 03 unit to give me osd with the F7 mini stack from T motor and can't seem to get it to work. I've swapped white and gray cables thinking I'm just cross eyed and double and tipple checked Uart's I have no idea what I'm doing wrong. it won't display.

@jeffb5615 Жыл бұрын

OMG I redid the presets after swapping white and gray cables now it works!!!!!!!

@RizHassan Жыл бұрын

@MadRC, I have the DJI FPV drone, V2 goggles and controller (Combo), Vista Airunit for my wing, and Original FW (Never upgraded). Can I use O3 unit with my V2 goggles after FW update? will it still going to work with Vista and FPV drone and controller?

@MadRC Жыл бұрын

Yes you loose nothing by updating and gain O3. The only down side is you still need to rebind when changing modes.

@maxfalk7662 Жыл бұрын

My air Unit is blinking red and green at the Same Time when im powering it up. I dont Know What to do, everthing is connectet up correctly and it has enough power. Dont Know What to do know

@emafpv1027 Жыл бұрын

hi, the HAM file only in the goggle 2 or also in the O3?

@MadRC Жыл бұрын

Just goggles 2

@ilpilotaconlabarba Жыл бұрын

Hi mads tech. I recently purchased a defender 25 O3 (updated to BF4.4) that I set using the DJI remote control, it happened that RXLOSS came out and the drone went into failsafe, despite having all the reception bars (both video and rc) completely full. What do you think could have happened? Thank you

@MadRC Жыл бұрын

Honestly the DJI Remote is just not reliable IMO, there are many issues, try updating the firmware on it if you have not done so already. I have seen lots of issues with the DJI Remote tbh

@Quad_Father Жыл бұрын

I recommend using ELRS or crossfire.

@ilpilotaconlabarba Жыл бұрын

Of course I'll mount crossfire but it would have been very interesting to understand why this thing happens🥲

@paulkim3521 Жыл бұрын

Is there a chance of getting a tumor due to the extra power?

@kpopRC 2 ай бұрын

it's too bad us surface guys are in the dark. how the hell do i get this thing at full power. Is the arduino working? no idea. stuck at 300m range.

@MadRC 2 ай бұрын

You can use Arduino with code that forces arming. Just search Google for DJI O3 Arduino

@DESTINYFPV 2 ай бұрын

Why is my dji 03 air unit in ce mode in the first place? I live in the us and I activated it in the us so why are all of my dji air units in ce mode I don't understand.

@diverFPV Жыл бұрын

Is there any way , not to lose binding , every time I change from o3 to the old system ?

@MadRC Жыл бұрын

Sadly no.