Configuring BETAFPV Drones to Fly with DJI Goggles 2 and DJI FPV Controller 2

Configuring BETAFPV Drones to Fly with DJI Goggles 2 and DJI FPV Controller 2 | Complete Guide...

Рет қаралды 3,187

Күн бұрын

Did you purchase a ‪@BETAFPVHobby‬ drone, but can't seem to get it to respond to inputs from your DJI FPV Controller 2, despite the fact you are using a DJI O3 Air Unit for your VTX?
I had the same problem when I received my Pavo Pico and Pavo20 drones and it is frustrating! Luckily, with help, I have learned how to configure your BETAFPV drone via Betaflight to respond to the DJI FPV Controller 2 and DJI Goggles 2.
This step-by-step guide will take you through the process of getting your drone setup so you can fly as soon as possible! If you follow each step exactly as I have in this video, you will be flying your BETAFPV drone in minutes!
BETAFLIGHT DOWNLOAD LINK (scroll to very bottom of page):
github.com/betaflight/betafli...
CLI DATA FOR INPUT:
serial 2 0 115200 57600 0 115200
serial 3 131073 115200 57600 0 115200
serial 4 64 115200 57600 0 115200
aux 0 0 3 1700 2100 0 0
aux 1 1 0 900 1300 0 0
aux 2 2 0 1300 1700 0 0
aux 3 13 1 1300 2100 0 0
aux 4 35 1 1700 2100 0 0
BUY BETAFPV PRODUCTS THROUGH MY WEBSITE:
thedronegeek.org/betafpv/
SPONSOR LINKS:
Website: www.thedroningcompany.com/
Instagram: / thedroningcompany
Facebook: / thedroningcompany
KZfaq: / @thedroningcompany
ALL THE DRONE GEEK LINKS:
Blog: www.thedronegeek.com
Facebook: / thedronegeekfb
Instagram: / thedronegeek
Twitter: / thedronegeekpa
KZfaq: / thedronegeek
PART 107 TEST PREP W/ PILOT INSTITUTE:
learn.pilotinstitute.com/a/af...
DRONE PHOTOGRAPHY 101 W/ PILOT INSTITUTE:
learn.pilotinstitute.com/a/af...
DRONE BUSINESS 101 W/ PILOT INSTITUTE:
learn.pilotinstitute.com/a/af...

Пікірлер: 34

@Shivers_FPV_Eire 2 ай бұрын

Your a legend man. Now at least I have my remote controller 2 inputs registering. I can`t tell you how long I have been scouring the internet for this. Thanks

@TheDroneGeek 2 ай бұрын

You bet! I struggled the same way I’m sure you have been. I couldn’t do it alone, but that’s what is so great about the community - there’s always somebody willing and able to help! Good luck, happy flying!

@Seemless600 2 күн бұрын

@@TheDroneGeek AGREED OMFG THAT YOU SO MUCH ITS BEEN AT LEAST 5 HOURS THANK THANK THANK YOU SOOO MUCH

@666gato 24 күн бұрын

Earned a sub on this one saved me from losing it and throwing this FPV 2 controler across the room . 😂

@TheDroneGeek 23 күн бұрын

I’m happy to hear you still have an in-tact controller. 😂

@kourosmoghaddam541 Ай бұрын

Simply, THANKS

@fpvkevlar8101 2 ай бұрын

Good setup video.

@TheDroneGeek 2 ай бұрын

Thanks for the comment. I put a lot of work into it and didn't expect it to get a lot of attention because it's a rather specific problem, but the fact you took the time to say something kind about it makes that work worth it. I appreciate it and you!

@lesd9160 2 ай бұрын

Thanks, Well Done!!!

@TheDroneGeek 2 ай бұрын

You're welcome and thank you!

@emrefrat3131 Ай бұрын

Hello there im kinda new in this but, i had dji avata before and i bought a PAVO20 as u guess, so now i did the 90% of the work i binded all the devices and applied betafly settings. I watched lot of videos but didnt get the right answer yet. So the problem is when i try to arm the drone its closing and opening again. Its resetting itself. While it happening HD icon's bar is rising down slowly and right after that its closing. I gived 10 hours to make it work and i believe i deserved a little bit help. Even from now i thank you for your helpful messages.

@yousifhassan2376 2 ай бұрын

You're an absolute lifesaver! I am facing one last issue though. Once the drone is armed, the throttle goes to 100% and i cannot bring it down unless i disarm it. I tried to do the same in BetaFlight motor test (without props) but for some reason the motors are going full throttle after arming. Any ideas?

@TheDroneGeek Ай бұрын

None unfortunately. Maybe check your throttle settings in the receiver menu? My other suggestion would be to check out your modes tab to see if you have an AUX input that is incorrect. That may be a good one to take to Reddit. I’m sorry I’m not of more help.

@junkmonk1043 9 күн бұрын

OH man, thanks to you and reditt guy, why does the official website get the uart port wront and dont give you all this information. Can I recommend they use your video officially?

@TheDroneGeek 8 күн бұрын

You can! I'm not sure they will -- but I do have a great relationship with them, so maybe! :)

@sebastianlobos 5 күн бұрын

Good afternoon ! First of all, thank you very much for the tutorial, I have seen it about 10 times and I have carried it out step by step, and it still does not assemble the engines. What can be ? I have the turkey 20 with the DJI Goggles 2 and DJI FPV Controller 2

@TheDroneGeek 5 күн бұрын

Genuinely asking...is "Turkey 20" a typo? Because if it is, do you mean you have the Pavo 20...and if it isn't, then where the hell can I get a drone called the "Turkey 20," because I absolutely will be getting one...

@sebastianlobos 3 күн бұрын

@@TheDroneGeek The Turks are tough.. hehehe, it's pavo 20, translation error was

@BobSmith-vd5gn Ай бұрын

Great video! do you know if these settings will work with the iflight defender 20 with a dji 03 air unit?

@TheDroneGeek Ай бұрын

That's a great question -- I can't verify whether or not it works with the Defender 20 or not -- I had somebody ask a similar question about a GEPRC drone -- it might, but I cannot say for sure. I'm sorry I couldn't be more helpful!

@YonnBurgos 13 күн бұрын

Hi! Will the CLI (last part) work on the new Firmware 4.5 for the Pavo Pico and the setup with the DJI RC 2?

@TheDroneGeek 13 күн бұрын

It should. I have not heard any issues. I can check with my contact at BETAFPV and follow-up on this thread if they give me a response!

@hankis22 23 күн бұрын

Question: Will I still be able to easily connect my controller and goggles to my DJI Avata also if I want to use that instead, or does this limit me to only using my Pavo drone going forward?

@TheDroneGeek 23 күн бұрын

Yes. The DJI Goggles 2 and FPV Controller 2 do not require rebinding when swapping between devices. All you have to do is select the correct device from that device menu where we selected the O3 Air Unit. Once the goggles are looking for the correct device, they will pair with devices they already know from the initial binding.

@hankis22 22 күн бұрын

Awesome, last question. Does the O3 air unit adhere to the same software flight restrictions that the Avata and other drones are subject to? Aka no fly zone restrictions

@codybradford7038 2 ай бұрын

will these same steps work with the geprc mark5

@TheDroneGeek 2 ай бұрын

Not confirmed. You could try it and if it doesn’t work you could just re-flash the drone’s original firmware and start from square one. I imagine it might work because the GEPRC drones are formatted similarly to the BETAFPV drones.

@alanlebec9564 Ай бұрын

Is paring back to a official DJI drone simple u just change the device on googles and put remote 2 in paring mode to connect to DJI FPV

@TheDroneGeek Ай бұрын

Actually, I think with the Goggles 2 you just have to pair once and then the goggles pick up and connect to the devices they remember. I’ve never had to re-pair with a drone using the Goggles 2 that I can recall. You should be able to bounce in and out of different drones - same goes for the controller 2.

@ebolarium 24 күн бұрын

Thank you for the great explanation. Just one simple question; Can I record video without Googles. There is a sd card slot on O3. Can I use video record button on Dji Rc2 to recording? Thank you..

@LucasLens444 2 күн бұрын

It is still not working for me Im using nazgul ECO with rc2 and the revire tab in betaflight is still not working. Do you have any idea how to fix this?

@TheDroneGeek 2 күн бұрын

This tutorial only applies to the BETAFPV series of prebuilt drones with the O3 Air Unit. I cannot advise you on a different build. I'm sorry!

@LucasLens444 2 күн бұрын

@@TheDroneGeek oh okay I have a pre built drone but yes not the right series. Thank you anyway

@junkmonk1043 9 күн бұрын

#betafpv #pavopicodjibind #pavopico #betafpvbinddji #dronefix