DJI RS4 Pro Review - New LiDAR, HUB, Focus Motors & Focus Pro Hand Unit
Рет қаралды 5,522
Күн бұрынThis is the DJI RS4 Pro & New Focus Pro!
DJI RS4 Pro: geni.us/rs4pro
DJI RS4: geni.us/djirs4
DJI Transmission: geni.us/djitransmission
DJI Focus Pro Hand Unit: geni.us/ldTxRK
DJI Focus Pro Grip: geni.us/focusprogrip
DJI Focus Pro Creator Combo: geni.us/djifocuspro
DJI Focus Pro All-in-One Combo: geni.us/yIIedd
DJI Focus Pro Motor: geni.us/LlDDr4
Tilta Car Mount: geni.us/6HK7Y
My DJI Ronin Gimbal Playlist: • DJI RS3 Pro: Tips & Sh...
All Gear: www.keithknittel.com/gear
CURRENT KZfaq SETUP
Main Camera: geni.us/sfx6
Main Camera Lens: geni.us/AVnL2
Second Camera: geni.us/WVlnt
Second Camera Lens: geni.us/oyOrL39
Third Camera: geni.us/fx-30
Photo Camera: geni.us/PUd6
My Favorite Budget Prime: geni.us/TcK1rZZ
My Microphone: geni.us/19OJoH
Sound Recorder: geni.us/8izIq
Key Light: geni.us/oI7x
Key light Softbox: geni.us/Ka9xoK4
Fill/Back Light: geni.us/ld150rs
Tube Lights: geni.us/tl120
Stands: geni.us/lOBq
My Editing Software: geni.us/6jBt1
Tube Buddy: geni.us/tbud
00:00 Intro
00:23 DJI RS4 Pro, whats new?
00:55 Native vertical shooting
01:20 Load Capacity & Torque Updates
01:41 Sony FX6: RS4 Pro vs RS3 Pro
03:08 New Joystick Switch
03:36 Follow Mode Switch
03:45 New USB-C Port Configuration
04:03 Focus Pro Motors Now Daisy-Chain FIZ Control
04:36 New BG70 Battery, and Smaller BG21 Battery
05:00 Automated Gimbal Locks and New Locking Mode
05:10 New Car Stabilization Mode
05:31 How To Use The New DJI Focus Pro System
08:16 The New LiDAR Pro
08:35 My Experience With The LiDAR
09:28 LiDAR & ActiveTrack
10:20 DJI Focus Pro Hand Unit - Wireless Follow Focus
10:45 You Don't Have To Use The Gimbal
11:10 The New DJI Focus Pro Motors
12:06 RavenEye
12:50 DJI Transmission
13:50 High-Bright Monitor
14:36 The New DJI Transmission Hub
15:13 My Thoughts On The DJI RS4 & Focus Pro System
#DJIRS4 #DJIRS4Pro #DJIFocusPro #camerastabilizer #LidarFocusing #AutoFocus #AutomatedManualFocus #AMFLensControlSystem
-----------------------------------------------
📱Social & Website Links
Instagram: / keithknittel
Subscribe on KZfaq: / @keith-knittel
Visit my Website: www.keithknittel.com
Read Articles: www.keithknittel.com/articles
About Me: www.keithknittel.com/about
-----------------------------------------------
🎵 Music
Epidemic Sound: geni.us/epdmcsnd
Music Bed: geni.us/msicbd
-----------------------------------------------
🤓 Disclosures
Amazon links in this description box and on my website are affiliate links, I make a commission if you decide to purchase using these links.
All opinions are my own and not influenced by anyone.
How I Review Products: www.keithknittel.com/collab
Business Email: keith@keithknittel.com
If you want to send me stuff:
Keith Knittel
14837 Detroit Ave, Ste 187
Lakewood, Ohio 44107
United States
@jbpasion071 Ай бұрын
Yes please create a separate video on car stabilization mode! Cant wait for your findings on this. Thank you!
@keith-knittel Ай бұрын
Awesome! Will do! Anything you'd like to see in particular? I plan on shooting the car mount video in the next week or two
@jbpasion071 Ай бұрын
@@keith-knittel I appreciate you taking the time to create the video! I am more interested in the car stabilization mode and with what system (Tilta or Movmax) would work best?!
@beni9486 29 күн бұрын
Awesome explenations. I m so exciting to try this gimbal
@codylarosa Ай бұрын
Dude wow!! An incredibly informative review you smashed this Kieth!
@keith-knittel Ай бұрын
Thank you, Cody! More RS4 stuff on the way soon
@paullawson5420 Ай бұрын
Fantastic breakdown Keith! Keep em coming!
@keith-knittel Ай бұрын
Thanks, Paul! Will do, working on more now
@DavidZhou Ай бұрын
Great deep dive into all of the new updates!
@keith-knittel Ай бұрын
Thank you David! 🙌
@corazoninmaculado77 Ай бұрын
Thank you I just got the RS4 Pro Combo I love it
@keith-knittel Ай бұрын
Awesome! Love it
@ShaneVanLitz 5 күн бұрын
Great video - Quick question! Does the gimbals focus wheel have the same automated resistance as the hand units? I find it super handy on the Focus Pro hand grip and I'm looking to upgrade from the RS3 Pro if the RS4 Pro has the feature!
@EbenPajanconi Ай бұрын
All I need is a BUILT IN ACTIVE TRACK IN THE GIMBAL. Just throw in the User interface from the pocket 3 where you can tap to track people/items. This would open up so much creative shots and movements especially for solo operators. I dont want to screw around with a separate raveneye or lidar system.
@keith-knittel Ай бұрын
Would be awesome, maybe someday
@AshleyBrown-fg3yh Ай бұрын
The native vertical shooting modes! Wow!
@keith-knittel Ай бұрын
Incredible
@BanderaFilmsAndMusic 23 күн бұрын
The FX30 doesn't show in the compatability list. I asked DJI but they said they're still testing other cameras. If you happen to have one, it'd be great to know how good they work together.
@msvideos70 6 күн бұрын
If you use the transmission cable hub can you use the RS4 pro, Ravin eye, Lidar focus pro and focus motor with a gh6?
@javiermolinaugarte Ай бұрын
Great video!! an specific video with the FX6 and the RS4 Pro will be awesome.
@keith-knittel Ай бұрын
Noted, anything you would like to see in particular?
@javiermolinaugarte Ай бұрын
@@keith-knittel specially the calibration with standar and vertical position. There are very few videos with the FX6.
@nikkoarnado6521 Ай бұрын
Hey Keith, need your help. What gimbal would you use for Tamron 35-150 and ZV-E1? Regular RS4 or do you think RS4 Pro would have more stable footage?
@keith-knittel Ай бұрын
Hey, I do not have any experience with the regular RS4 pro, and have not tested it out for myself yet.. so I can't really comment on which one would be better. Sorry for that underwhelming response
@priticolours1177 22 күн бұрын
I appreciate all of the info! where'd you get the t bracket to mount the high-bright monitor to the focus pro hand unit?
@DarKSpiritAU 12 күн бұрын
I would also like to know this! :)
@priticolours1177 12 күн бұрын
@@DarKSpiritAU these t brackets are from the original dji focus hand unit (for zenmuse and ronin cameras). i wonder if they will be releasing a newer version or something in the future. i bought the system hoping i would have access to this accessory for a mobile ac workflow
@stucooke3983 Ай бұрын
Hey man thanks for this video! I’m not sure if I understood completely - are you able to use the focus pro system and control the gimbal at the same time? For example, could you use the focus pull device on the same monitor as the hand grips for gimbal control? Would maybe use LiDAR to set autofocus then just control gimbal use handgrips or motion control to set framing? Is that possible?
@keith-knittel Ай бұрын
Yo - yes you can use the focus pro hand unit to pull focus (without the monitor and you have to be within wireless range of the focus pro motors) and the monitor with DJI handles to adjust the gimbal positioning. While you technically can use multiple different focus tools (the dji monitor+handles, focus hand unit, and on the gimbal itself) to control the focus motors, you'll run into problems adjusting focus with multiple tools at the same time. For example, after calibrating the focus motors with the hand unit connected, the focus range is stored as a 1-100% value on the hand unit. So if you focus to halfway (50% on the hand unit) then adjust the focus on the DJI monitor+handles, the focus on the lens is no longer at 50%... but the hand unit does not know that. The hand unit still thinks it's at 50%. So if you go to adjust focus, the hand unit will adjust focus back to 50% - probably ruining the shot. I would only choose one method of adjusting focus and stick to that for your entire shoot - for your 1st AC's sanity too! ha You can enable lidar af, and use active track - or use the high-bright monitor with handles to adjust the gimbal positioning. Check out the DJI focus pro section of this video for more on that. Another note, you can't use the handles on the high-bright monitor AND have the monitor attached to the hand unit though, as there is a connection on the bottom of the high-bright monitor that connects with the cage for the DJI handles, or the bracket for the hand unit. Sorry for the long-winded response
@stucooke3983 Ай бұрын
@@keith-knittel thank you! You are literally the only person on KZfaq who has done this level of testing! Appreciate the explanation and thank you for helping me make the decision!
@keith-knittel Ай бұрын
@@stucooke3983 Thanks for the kind words and glad to help out!
@rayortega4831 Ай бұрын
Nice setup, what is that mounting system you're using on the car? Can you provide a link for it? Thanks in advance.
@keith-knittel Ай бұрын
Using the Tilta hydra alien advanced - added a link to the V-mount version I'm using in the description
@rayortega4831 Ай бұрын
@@keith-knittel Thank you, I'm the in-house creative for a diesel performance shop, so this might be something I'll be picking up, soon.
@EmeraldAudiovisual Ай бұрын
Do you have the link for the new DJI Transmission Cable hub ? It doesn't seem to be listed anywhere.
@keith-knittel Ай бұрын
I'm not seeing it anywhere yet either - the hub on the DJI site right now is the original version, but the updated hub isnt listed yet. Will try to see when that will be available
@EmeraldAudiovisual Ай бұрын
@@keith-knittel I have the original hub, so I'm aware of that, but from what I understand, that's not going to work with the DJI Focus Pro combo.
@dwhkiang Ай бұрын
Great review! Does the transmission hub come bundled with any of the new releases (as it looks different than the original one) or is it purchased separately? I haven't been able to find it on the DJI website so maybe it's pending release?
@keith-knittel Ай бұрын
I don't think the updated transmission hub comes bundled with anything right now, that being said I don't see it available on the DJI site at the moment. I see the original version on the DJI site right now. The version I have has an interchangable mount for powering the hub with either the RS4 Pro's USBC ports, or a D-tap. Will reach out to DJI and see what they say 👍
@StefanBastein Ай бұрын
Also saw it and am in touch with dji but the chat say they dont know anything about it. Sended your screenshot form the video. So think that they dont want to say anything atm. Am in for the new one also. Does it work with 3 pro also?
@dwhkiang Ай бұрын
@@StefanBastein It should work in the eco-system. Seems the only difference is the ability to remove the P-TAP power dongle to make it be powered by USB-C thus removing the need for an external battery to power everything and just draw from the DJI handle battery. Makes things more streamlined. A good improvement IMO.
@StefanBastein Ай бұрын
@@dwhkiang yeah probably indeed. Lets hope they say more about it soon. Would be awesome eventhough I have ptap on my Komodo would love to get rid pf the old one and use this one with more options to power.
@divides_by_zero Ай бұрын
Excellent review! I really enjoyed the car shots and overall production quality. But I have to ask. What's up with the salt (10:06)?
@keith-knittel Ай бұрын
Thanks for the kind words. And I'll just leave it at... she was "salty" ha. It was a super short film where I was testing out some lenses. More to come on that later!
@AshleyBrown-fg3yh Ай бұрын
My outfit felt like Morton Salt girl all grown up vibes so had to incorporate it 😂😂
@divides_by_zero Ай бұрын
Thank you both for the replies. Now I won't be laying awake at night trying to figure it out 😀
@krzysztofrodzik5343 Ай бұрын
Where did you get DJI Transmission HUB? Do you know part number or model?
@keith-knittel Ай бұрын
I've been keeping an eye on the DJI site, but it doesn't look like it's listed yet. The V1 cable hub is on the site, but this new version has interchangeable powering modes. Will try to update the pinned comment/description when DJI releases it
@krzysztofrodzik5343 29 күн бұрын
@@keith-knittel Can you make a detail video about Cable HUB v.2 and motor bracket, connections etc?
@rickygeeish Ай бұрын
The BLANTONS 👌
@keith-knittel Ай бұрын
Haha someone noticed it! Was driving through KY recently and was able to snag that at the buffalo trace distillery! I got lucky
@Live2dayWanderland Ай бұрын
What car mount is that?
@keith-knittel Ай бұрын
Tilta hydra alien
@jamesmather7896 Ай бұрын
This is very confusing - does the full follow focus unit come with the RS4 unit? This video makes it seem like it does.
@keith-knittel Ай бұрын
Depends on which kit you buy, you can get just the gimbal or add on what you need
@jamesmather7896 Ай бұрын
But they give you a follow focus unit in the combo but no way to use it to control a lens thereby making it useless. Seems redundant.
@keith-knittel Ай бұрын
@@jamesmather7896 You can control the focus motors on the gimbal using the front dial
@jamesmather7896 Ай бұрын
Happy days.
@logicmr.8351 Ай бұрын
do you think getting the combo is necessary?
@keith-knittel Ай бұрын
If you have manual lenses, want the raveneye, briefcase handle - the pro combo is a good choice. If your only using autofocus lenses and don't need the raveneye, the gimbal only would work
@logicmr.8351 Ай бұрын
Ok thank you for your response? I just pick it up the gimbal only version… figure I will just buy the add ok separately later on as needed.. but for now just the gimbal will do most works for me
@joenicklo Ай бұрын
That setup just does NOT look fun to hold without a ring grip. Great video as always Keith.
@keith-knittel Ай бұрын
It's fun, in about 10 minute increments, any longer then the easyrig comes out haha Thanks Joe!
@ymer2501 Ай бұрын
DJI have thought everything but the cabling routing and organizations...if only they can figure out all those clustered cables dangling when attaching everything...
@keith-knittel Ай бұрын
tons of cables!
Keith Knittel
Рет қаралды 156 М.
Royal Computers
Рет қаралды 741 М.
spline
Рет қаралды 357 М.
Гохич
Рет қаралды 2,7 МЛН