You should put the battery on the side of the box where the USB charger is so it doesn’t stick out so far

As an electrician that only uses Milwaukee and Sergio killed it and super clean being OCD that’s important I love it! And I just bought jerky so throw cash in my order lmao 😂

The timing of this video! been needing to rewire my trailer. Appreciate it Sergio!!!

Awesome showing the lights being installed on the trailer and the time laps with them on

Well done, gents! Very clear and thorough tutorial 👍🏽

Suggestions: The battery adapter should be mounted to the bottom of the box, with the battery's indicator lights facing outwards, in the same direction of the switches (just like the battery would normally mount on a tool) This way you can easily check the battery's level of charge, and so you don't have this giant thing sticking out off the wall waiting to bump your shoulder EVERY time you walk by. With the battery relocated (where it should have been), you make room for more switches in the door, (for a master switch right off the battery adapter instead of having to use that dinky switch on the battery adapter you bought, which is forcing you to mount it in a horrible location) or to mount the screen of the charge level monitor into the door's face so its constantly viewable from outside the box. I'll accept a 5% royalty for every until sold of the new design. I'd also check to make sure it's OK to plug USB chargers into that dual USB port you included, considering that's meant to be installed on a 12v system, and you have a 20v battery powering your setup without a step-down.

Sergio does top notch work. Love to see someone take such pride in what they do.

Absolutely love seeing some real attention to detail on every part of what he does. Love the idea to. Will be stealing this idea for Father’s Day for my Dad’s shed that’s a few hundred feet from his house

I like how simple and straightforward this design is. Complements to Sergio.

Well done. 10 Year's ago I made my own unit similar to this, for our boy scout troop trailer. In this case I only did interior lights, master power switch, motion detection detection switch. The big difference was the battery. I used a small 12Ahr gel battery ($20) with spade connectors, so we can remove the battery and charge it. Leasers have been talking about making two more small portable units for the latrine for our week long summer camp. Thanks again

Did same thing with my trailer and added a solar panel and a charge controller for the 12 volt battery charger for the batteries. I just rotate them out every other day. Great video and great content!!!

I had a comment typed up about draining the batteries too much and using fuses while the video was still playing. I'm very glad to see that you and Sergio actually mentioned that and did a professional job. Too many people are just throwing this kind of stuff in their vehicles without using the proper safety measures. One small note though: The internals of a Milwaukee 18V are EXACTLY the same as a DeWalt 20V. 20 or 18 volt is just marketing, the voltage ranges will be identical.

I don’t have a trailer or hunting blind but this makes me want to get one just to put in the lights. Absolutely killed it again! 🔥🔥

Sergio is awesome! So humble, I love it!

Already made plans for at least 3 trailers to get this upgrade after seeing your video on tiktok. Ones being a gift for my parents company trailer. Can’t wait to get it started.

I have done this in my trailer and my shed It is very nice to know about the distribution block for future projects and the low voltage disconnect to protect the batteries.

What a great idea! Just got a new trailer and was looking at installing a battery to power the interior lights, didn't even think about using my tool batteries....genius idea.

What a brilliant idea! I will be doing something very similar now to power some lights under the canopy of the truck! Great video

sweet, a ryno video to watch right after getting off work!

This is a brilliant idea. I want to do this for my camping trailer

This is a great solution for small lighting needs.

Nice, clean set up. I like that off switch on the adapter. If I can't find one like that, I'll hook up a separate kill switch running off the black. I'll need to look into building something like this for our '90 VW Vanagon. Definitely, I'll design a solar charger to keep my spare batteries topped off. Great video!

I have something similar with a marine battery & solar with 4000w inverter plugs lights and switches works great but this is definitely a cost effective way to do this plus it looks great good job 👍🏾

I found these when I was going to do something like that for a container. At the end of the day it Blows that away! Not to mention the space and mess it saves.I run real LED shop lights inside. Plus you can run up to 1000watts with this. Power tools on site! Plus the warranty made it a win for me.

This is a good professional installation. I can use it in my offgrid sea container.

Nice set up you guys are going to sell a lot for those who go camping and use trailers

Pretty sweet set up, definitely buying one when I get a trailer. 👍

Thanks Ryno and Sergio! I really needed to see this! Awesome video!

I don’t know if anyone has mentioned it but the Milwaukee low battery cutoff is in the battery and the DeWalt is in the tool. So it’s a good thing you added it anyway! Great video!

Super cool, would be great for a shed or small building for emergency lights.

Will love one of this for my kids tree house if I get chosen.. but awesome set up and explanation of everything

that's super cool. would be awesome for my enclosed motorcycle trailer. a little more than I would spend since I don't really use it at night but definitely a quality product.

Yes i want you to give it away and its a great video. I was very interested when you previewed this and i'm going to order one either way. This is good stuff for my storm shelter backup system.

Awesome! Just wired rear lights to be active for reverse or switch. Mains power through the aux connector of 7 pin into 2 relays. 1 triggered by reverse connector and 1 by switch. This way sit doesn’t back feed to truck and turn on truck reverse lights when using the switch. I may have to add this into the mix too.

thats a really great value ...even getting it assembled

Amazing video! Ordering up a few for our setups! Thanks Ryno

This is excellent! Now I need to get an enclosed trailer.

This video had a great format with great instructions! Keep up the good work Ryan

I hope you and Sergio sell a shit ton of these. I’m sold

Great video, i managed to put one of these together for less then $100, hell of a saving compared to the $450 asking price in kit form or $550 fully built

WHat is great is you can buy adapters online for any tool battery platform out there and adapt it to so many applications. Its great! I did something similar with M12 batteries powering snowblower offroad lights for night time snow removal. I also have similar setups with Ryobi 40v batteries and 18v batteries.

Was literally thinking about creating this 2 seconds before this video popped up! Thanks for the info!

Great idea use your tool battery's Im going to do this at my storage unit keep up the great work

Definitely worth the wait!!👍🏼👍🏼

This is really awesome Ryno and so cool of you to do this for/with Sergio! Great price too! #badass

This would be a killer set up for power in my small building

I’m so glad y’all made this video I’m a newbie at this and I want to do the same setup! Thanks guys!! Keep up the good work and content!

You got this 500,000 views and want you to remember me when you hit it 😂 I can def use one of these in my trailer 👍🏻💪🏻🇺🇸

Great idea!!! And really clean install.Nice job

This video makes me want to fix the lighting in my work truck's SpaceKap. 4 years ago when the SpaceKap was installed on the current work truck, the dealer did not hook up the SpaceKap internal lighting. Your solution is sort of what I was thinking of doing, but trying to run the existing lighting via the AUX power port in the SpaceKap.

Definitely gives me some inspiration for my fishing boat

I seen the adapter on ebay when i was looking for spares for my Milwaukee sweater i mine was such a life changing thing for me i have serious nerves damage so it helps

This is awesome, may look into to for my off-grid shop.

Love it...ordered the assembled!...WORKFORIT!

Great idea, I've been looking for away to light up the trailer while it's at the storage unit.

Giving me ideas to add on my overland bed rack

This is definitely what I was searching for!

Hello, just now seeing your video, I have a full off grid trailer setup but I will be making a new trailer Lord's willing soon so I would consider using your setup 😀

Damm those lights are super bright!! Im going to order some right now!

I use battery adapters for my milwaukee batteries in a portable mut machine for trailer lights , tool batteries are so useful.

I did almost the same thing. Using the trailer break away battery. The truck keeps it charged. And added a solar panel to the roof for when the truck is not available. But I like this option also.

That was a Dantastic setup and tutorial. Thanks for taking the time to walk us all through it. Work For It

Love it. Will be ordering for my trailer

Great setup for a work trailer.

Very clean and great looking application

Great little cost effective system.

This was awesome watching your video without commercials !!!! Don’t know why but commercials got very ridiculous on lots of videos yours was great wish more videos was like yours

Great set up. Convenient packaged

Very cool setup. Either one would work for me. I have both Dewalt and Milwaukee! Keep up the great videos and work!

Definitely doung this to my shed I have out back

Living in northern ireland im gonna attempt this myself, unless i win the freebie 😂 Seen it originally on tiktok so had to come for the tutorial. Thanks for sharing.

This is an awesome idea. I’ll post this to my Instagram and share with everyone. Also to help support you and IEP.

Really like this idea.. you should have a video on how to run a system so you can charge your battery pack with the chargers.

I need on for my Makita !!! This would be perfect!!

This is awesome! Totally what I’m looking for

I just ordered my dewalt kit assembled with 12v step down. Looking forward to placing it in my cargo trailer I just picked up today

That is a really nice set up and could really use that at the new place...if I don't win one I'll have to check it Sergio's set up thanks brother

I agree with the side of the box for the battery

Great video of the light box.

That's slick. Excellent choice on lights that can operate on the wide voltage range. Do you have the ability to connect it to the truck power feed to the trailer? FYI, Ryobi "One+" batteries put the protection in the battery. That's how they are able to use the new lithium batteries in ancient tools that were designed for and shipped with NiCad batteries.

Love that setup!!!

Really clean setup.

That’s such a great idea!

Great video! Keep being awesome!

I thank you for the excellent tutorial Sir ,Sergio

Very cool i see this with solar panels in homes soon

This was a damn good video! Good job guys!!

This is an awesome set up

Dude that is clean!!!

Loved it, two suggestions, 1) put the battery on the bottom of the box, so someone's shoulder doesn't rip it off the wall/box, 2) add a second battery holder in parallel, for a full shift of work

Great idea. Very nice!

Nice lil set up

This is a nice setup!

Cool setup

You should add the option to run switches at both doors. I think that would be a good option too.

Love the idea of this being sold as a kit. My only upgrade that I would like to see is drill slightly bigger holes in the metal box and add rubber gromets to the holes to prevent the wires from chafing.

Great video. Thank you for sharing

Now I’ve got a new weekend project. This Canadian might have to check out the shipping and duty from IEP

Awesome setup

Very cool idea