Still rocking it in 2024! I'm just getting into Lighting up my home studio and waiting for this same DMX Controller to arrive in the mail. THANK YOU for sharing this learning process. I appreciate you. New Subscriber here, Cheers from Western Australia

This is, by far, the best explanation and demo on programming this unit that I’ve come across on KZfaq. Thank you for taking your time to make and post this video!!!

THANK YOU! I have avoided working with AV equipment for years as a music teacher and this was so helpful to program a little light show to go along with our concert!

This is how I learned to do do lights. Analog first and then computer software. I use soundswitch now but it definitely helps to have this base of knowledge before moving to more advanced lighting methods.

Thanks for posting this never used this equipment before ,I tried the instructions & got absolutely nowhere .Watched this & now got a better idea. Thank you

Just a good 'oll, brilliant DMX programming 101 video! Not many of these in this day and age, thanks Mr C!

Thanks for that! I could follow that. You are very good at explaining things. I have watched other videos and I've been more confused after I've watched them!

Brilliant video, I've been fighting with a dmx controller and it was about to go in the bin. Your video has made it all make sense - thank you

By Far the best Explanation out there!! Thank you Philip!

Watching and Supporting - Grabbing more of your time!

Thanks for taking the time to make this video, I have the same controller but it is branded SoundLab. Will check your other vids to see how to add an additional light of the same kind, I hope there is somehow a way to copy the scenes from one light to another. Regards from the UK

This helped me, thank you. I'd been trying to use the one I'd purchased and had no idea I needed a terminator.

I don't feel like scrolling through the comments but I would like to say the terminator is not necessary unless you have a long runs it should work without it. it is just good practice to do as it eliminates Signal reflection which could influence the data on the wire. Good to have them around to terminate problems.

I also bought this controller with wireless connections. This video was good for starting, thx!

Very cool product and review. Happy New Year! Hope our channels quadruple in size this year.

Great unboxing thank you for sharing have a great night

Very cool lighting controller device and great tutorial, too :) Happy new year! full view done happily :)

Well explained. Crystal clear. thanks.

the best video about DMX on youtube , help me a lot !!!! , thanks !!!!!!!!

Thank you that helped a lot I just got one and I've got to figure it out by the weekend so i look like a pro at the festival i'm going so perfect explanation, very clear Cheers

Amazing review, I think I understand now what some people think when I talk about computers lol...Got my daughter an electric guitar and amp for her Birthday based off some of your videos...Thanks...Have a Happy New Year as well...

So good! You made this basic and simple compared to the other videos on Yoytube, thanks!

Thanks this is absolutely the best to the point tutorial ive come across. Extremely helpful, got a kick out of you pointing out they have us coming to youtube. Thanks again. Lets hope i understand and can get mine working.

Hi, just want to say thank you for this tutorial video, thanks to you I got to understand how to set scenes and chases with my moving head on my dmx. Thank you again

Looks like a fun unboxing! Great results! 👍😎 ~Maverick

Very helpful, thank you !

It is very interesting.I wish I could have this long time ago in my studio ..Thank you for great review

Watching and Supporting - Dropping another LIKE on your video!

thanks so much! all the other tutorials on these cheap desks have made no sense to me at all! Now i feel i have a new part of my brain that i can use! whoop!

finally a good teacher. thank you

Thank you so much for this. Amazing tutorial

Thank you very much brother about this video, i just bought dmx,,,,,,,,,South Africa

Thanks for the info Phillip, I didn't know you needed a terminator for the end of the daisy chain. that could be the problem i am having. orders some today. thanks again

Grabbing more of your time, Watching and Supporting!

Thank you very much. Excellent video.

Thank you. Well and simply made.

thank you great video helped alot

Thank you for your explaining ❤

I have the same controller and lights. Finally trying to figure out how to use them

I agree with Lisa on the Disco 💃 Watching and supporting 🤠👍

Thank you this helped a lot!

Thank you bro. Very helpful.

i need to practise this. a good lesson. thanks

thank you! nice video and useful!!!

Its 2019! HAPPY NEW YEAR! Cheers from Australia!

Whats funny is i saw this item on ebay. Copy and pasted the name of it on youtube... only to find out the instructions said look it up on google or youtube. I did good. Im happy!

Ahh, the old “Instructions are found on the Google, or on the KZfaq” trick. It saves low cost Dj tech makers from telling you anything. At that point, you simply have to hope that a good KZfaq or Google Samaritan can inform you of how to use the product, since the product developer can’t be bothered to. The other joy is, when I buy lower cost par lights, or moving head lights, to mix into the background of my more costly Chauvet or ADJ versions, the instructions never seize to amaze me. They usually have a ton of typos and odd wording, such as, “The lite plug to make work.” That’s a direct quote with the typos included. It’s actually one of the better examples. Here’s another winner, “We assumes no responsibility and specifically disclaims any and all liability for any loss, damage or disruption caused by any errors or omissions in this document.” English wasn’t even my first or second language, so it reminds me of when I just moved to the US with my parents before my sister and I learned how to speak English fluently. Now to be fair, some of my lower cost lights have the same brightness level as my more expensive ones, but the color reproduction for certain shades isn’t as nice in certain cases. There have been two incredible exceptions that have floored me and made me return, or sell my more expensive equivalent lights in favor of their far cheaper alternatives. The “LaluceNatz 20 In 25W 108LEDs RGB Wash Light Bar” has exceptional color reproduction and light blending. It works best when it’s very dark though, but the results are stunning when it’s dark enough. It also has a sturdy metal casing, despite lacking the remote functionality that my other light had, it’s easy to use, and it’s auto fade mode is beautiful. The other cost effective surprise I’ve been using as a backup for my dual second generation ADJ Stingers is the “DJ Lights,SAHAUHY 2 in 1 Professional Stage Light Mixed Effect Sound Activate.” This one not only comes with a remote, but it has a very good sound activated mode for the price. The most impressive thing however is how the red and green laser lights, as well as the derby effect LED lights, are actually brighter than my original gen 1 ADJ Stinger. It also looks incredibly professional sitting on top of my low cost Rockville DJ Totems. When it comes to speakers, while I use the superb Rockville Hydraulic Speaker Stands, Skrims, Dj Facade, Fog Machine, Totems and their included bags, my speakers and other gear are all either EV or QSC and Numark. I think with anything, you have to balance the gear that you can get very good knockoffs of, such as par lights, derby lights and lighting strips, with one or two ADJ or Chauvet lights, and high quality speakers, mixers and actual DJ gear. This video was very informative, and to the point. Thanks for taking the time to make it! I have a lot of event lights and didn’t want to spend a lot for a DMX controller, but wanted to program my moving head lights to only face the dance floor for a wedding event. It didn’t make much sense to buy an expensive controller for such a basic function, and this video helped make my decision much easier.

hope you had a wonderful new year! good review!

good explain. thank you

Fan-tan-tastic unboxing Philip 👍😎

thanks for this, i bought the same items and this helped out a great deal.

You save my life 🙏 or at least my videoshot 😅 thank you!

Great video! 👏Thank you

Greetings brother, I'm so happy your tutorial made it big. Hopefully you can make more tutorials like this soon. I also noticed your Canon Wi Fi video has 50k, thats awesome

I've always wondered about how hard it would be to set up a dmx system. I just run my lights on music auto mode. This was cool to watch.

Awesome can't wait for mine

süperdi bemde bugün 4 adet aynı par light aldım , dmx kontrol paneli ile ,deneyeceğim

Wow, you get good stuff, tu for sharing

So cool my friend god bless you

This was very cool 👌 nice review and video

Light is pretty cool 😎 I like it. 🤠💃

Best teacher ever

great job dear friend

Woow love those kind of stuff glad that pusa send me here hope we can stay active and support each other!

Excellent

Great Unboxing!, I'm a knife guy too. Happy New Year Phil, Lets roll!

Phillip Thank you for your tutorial. Better then all the rest. ? If you have time can you make a video to connect martins and moving heads . Thanks have a great day.

thanks a billion!!!!

Amazing review .

Thanks!

Awsome ty think i am getting it now 🤘😊👍🍺🍺🍺

Cool video liked 👍😀

HEY! ...... I’m in Northern Ontario too!! :)

Pretty cool. Might have to look into picking up one of those.

Watching again. And I would like to be the first pole dancer at Phil’s disco pole

Thanks you so much sir

That's a lot of channels it can run .like the led light also

Thank you

Thank you man

thank you so much

Thanks for this. I was wondering why my lights wheren't turning on. Need to grab some terminators

Great review. It's helping me with teething problems, being a newbie to DMX. Unfortunately the controller came with a manual in every language except English, and the sellers aren't replying to my pleas for a manual. In desperation, do you have an electronic copy I could have?

i'm gonna buy these lights and program like this with the song (waiting for love by avicii) and i can press the chase, thank you very much

Hi Philip, thanks for this very helful video. For instance, do you have any idea about the DMX adresses for the scanners to the left? Of course, scan 1 is one, but I'm looking for the other ones. Many thanks in advance, and cheers from southern France, Mat

I am planning to stream some music live and was wondering how i can add some gumption with some lighting. This will help me a lot. I'll buy one of these when I save some money and start streaming. Thank you for this video!!!!

Thanks

3K!!! woooo hoooo hooooo!

Sirrrr .. THANK YOU . THANKS soo much . YOUR video was the only detailed video that help me today . Side note . Please let me know which wireless transmitter you get and use. Pretty please . I want and Need more KNOWLEDGE

heads up, I just learned you have to keep "1" UP in order to make the red blue and such turn on. And if you want to add a light, you have to lower the "1" and bring it back all the way up. No video explained this, it took me an hour to figure it out. I thought the machine was broken.

What does it mean if the address number on the back of the light (e.g. d017) is flashing rapidly when lights are daisy-chained?

Hi! Thanks for posting! Just got the exact same lights, but they dont reapond to dmx data. What mode did you have them in for this to work?

Thanks for sharing. This was very helpful. I have a question on how to clear or reset the chase settings? I’ve used chase 1-4 and now I want to clear them and program a different chase color pattern.

Cool😎

That's some really good tech! Great unboxing bro. Does Amazon sell it?

and when i daisy chain them even only to the second light the first pne turns off and can’t control any lights

How can I change the scenes manually on such a controller so that there is a smooth effect (fade)? It is obtained only when the program is executed automatically.

Thanks Philip! Is there a way to fade from scene 1 to 2 and back to 1? Without using a chase.

You can run this without a terminator for short runs or small numbers of lights, but you're right, it's a lot better if you terminate.

You set a scene in a chace, but need a fixture set up in a chace in steps.

Hey Philip , Nice item man what did it cost you ? Wishing you and the family a Happy New Year and Great 2019 👍😀