DO CANNED DRYWALL TEXTURE SPRAYS WORK?!! (Knockdown)

Рет қаралды 559,636

Күн бұрын

Do they even work? It seems too good to be true but you don't know until you try!
amzn.to/2FEVamB
amzn.to/2HPC3K8
amzn.to/2I2Y5IG
Tools I use often:
DISCLAIMER: As an Amazon Associate I make a small commission from purchases through these links. Thank you for the support!!!!
Drywall knives:
2" amzn.to/2LwX8ty
4" amzn.to/32OHlw3
6" amzn.to/2LwP1x5
10" amzn.to/2QbLbOp (This one will rust if you leave it wet but feels nice to use)
10" amzn.to/3056fcU (This one is stainless. Stiffer, more expensive but won't rust)
Mud Pan with Grip!! (This is the BOMB! You will thank me!)
amzn.to/31tQauH
Tin Snips GOOD QUALITY!! amzn.to/2LzlOBv
Drywall Tape Holder!! amzn.to/32Udhzd
Paint Mixer for mud!! amzn.to/303fX0q
Full size mixer!! amzn.to/2LYrMLe
Mixing Drill (just in case)!! amzn.to/2O2oQ2P
Hawk and Trowels
13 inch hawk:
amzn.to/2ZWZXw2
13 inch trowels:
amzn.to/30aJPTB
amzn.to/2ZWH39d
amzn.to/2ZSY5Fj
12 inch trowels:
amzn.to/2Q5fGW4
amzn.to/2ZYKXxu
14 inch trowels:
amzn.to/34JeydR
amzn.to/34CdmsJ
Auto tools
If you don't want to think, here is the whole kit (Columbia is great quality too!) amzn.to/2UwPUae
Mud tubes and applicator:
amzn.to/2Xt65XR (different but works great, I have this one too)
amzn.to/2DBs1sz
amzn.to/2Vdy8x7
Flushers
amzn.to/2Dqa0x8
amzn.to/2GyDBGy
amzn.to/2Ix1Reo
Handle adjustable
amzn.to/2XuGP3x
amzn.to/2Xy5ILU
or fixed handle amzn.to/2DrNt2O
Corner roller (head only, you may need another handle)
amzn.to/2XpuJZo (cheaper)
amzn.to/2XpuNZ8 (better quality)

Пікірлер: 332

@jason8507 5 жыл бұрын

It's leaving pretty big blobs because the can is cold. Run it under hot water for 5 minutes it will increase the pressure and make the adjustments more accurate

@robertmezzio9937 Жыл бұрын

Thanks Jason, will do. I have to fix some minor creases in some of the joints of my drywall.

@KB-sd9ch 8 ай бұрын

I'll try that

@seanp1602 5 жыл бұрын

I wanted to thank you. Watching your videos has really upped my game in renovating my home. I’m no pro but I’ve made wall joints that I can’t find. Thank you for making all these videos and the format you do them in.

@matthewsingleton5836 5 жыл бұрын

Put the can in a bucket of hot water for 20 or 30 minutes it will increase the pressure that it puts out also when you're done with it turn the can upside down and clean the nozzle out you can make it last two or three small patches

@justmetv6725 5 жыл бұрын

Matthew Singleton thanks for that dude!!

@tonyfromaccounting56 5 жыл бұрын

I was just about to comment this, yes this helps the can tremendously!

@nikknm08 5 жыл бұрын

I was about to comment the same thing.. warming up the can helps a lot. Continuous trigger pull may help with consistency of spray.

@granthicks4332 5 жыл бұрын

The hot water is very useful! Also, if you have a choice on orange peel I really prefer the oil based, water based pits but make sure to use a good paint in order to hide the hot spot!!

@zagnit 5 жыл бұрын

I warm mine up too and I never use the water based.

@laurenmarina8645 5 жыл бұрын

I decided to freshen up my bedroom with some paint. This led to me removing some wood trim (aka 2x4s) that the previous owners put where all the corners of the walls met including the ceiling. This revealed they did not mud and tape when they finished the basement. Thanks to your channel I’ve learned how to do that easily and my dad said I did a better job than they did where they did decide to mud and tape. I purchased the orange peel canned texture just to match up what I’ve done to the rest of the room before I can finish painting and this helps a lot! I’ve been cautious to start since I’ve gotten this far. My next room I’m going to do is our living room which has wood paneling and I’m dying to know what they hid under there for me to fix. Either way I’m sure you have a video for whatever I’m going to encounter next.

@ronaldeisel5927 5 жыл бұрын

Hey Ben: Been using the orange peel type for several years. Works very well provided you get the spray "dialed on" first on a test piece. The spray adjustment will give you a wider range of spray patterns if you screw it in or out beyond the "vernier" on the can top. You can turn the can upside-down and clear the feed tube and nozzle when you are done spraying which will give you a longer storage time for the unused portion. Keep the videos coming!

@allegedly6 5 жыл бұрын

I use them alot here in Oregon. You can adjust the way the tecture comes out of the can by warming or cooling it. You can actually do a fine orange peel by geting the can of knockdown very warm under the tap. For small knock down patches I dont use it, I just use a sponge or plastik bag with mud but for small orange peel patches I will use the can. To asure the can doesnt go bad turn upside down and spray until no texture comes out. Cheers!

@davocrazysteele 4 жыл бұрын

Thanks for all you do. I appreciate the way you explain things. I've had 3 DIY projects so far that have been super successful.

@dasaster7993 5 жыл бұрын

I’ve gotten better results by just holding the sprayer down and moving in a circular motion, instead of using it like spray paint.

@bing12345678901 4 жыл бұрын

This

@bobseaver7807 4 жыл бұрын

Dasaster 79 yes👍

@ivosan11 3 жыл бұрын

do you mean hold upside down?

@dasaster7993 3 жыл бұрын

@@ivosan11 no, Im saying don’t let off of the spray button, just hold it down and move it in a circular motion. I’ve gotten better results doing that way.

@MarcooPF 2 ай бұрын

So face the nozzle directly at the board and turn a vertical circular motion

@dymarke 4 жыл бұрын

I use this stuff frequently and always keep some cans in the van. The bigger can with the "hopper" nozzle sucks so don't bother with it. This canned texture does take lots of practice, here are some tricks to help and to adjust your texture to give different results: The temperature of the can before spraying makes a huge difference in how the mud sprays. To get more depth in your knockdown you can spray a base coat of orange peal and let it set up then spray your knockdown coat over top or let the first coat partly set before adding a top coat. Varying the standing time before knocking down. Shake the can very well and frequently. This stuff shrinks a lot so your wet texture needs to be heavier then what you are matching. You can use a hair dryer to get it to set up faster If you have left over rinse the nozzle and keep a lid on the open can.

@arturoborquez884 5 жыл бұрын

You are right Ben with practice this texture cans work good, I've been finishing and texturing drywall for about 15 years in Denver, Colorado area, there is a little texture handpump for small patches like that, it also works really good, you should try it too. Great videos keep it up men.

@evelynmccagg9579 5 жыл бұрын

Usually if you wash the can & nozzle off you can use it later, my last can I reused was about a year old & it still worked 🙂

@82Ismael 4 жыл бұрын

Great video. The video and lighting was perfect. Although i was looking for orange peel texture i found this one very informative thanks. 👍

@jamesherman1350 5 жыл бұрын

The hot water absolutely works. I've used the orange peel version many times on small repairs and as long as the texture isn't too large it works pretty good.

@LANPOCALYPSE 3 жыл бұрын

I have learned so much from your videos. Thank you so much for them. Love the skateboards in the garage!

@KyleSchwanz 3 жыл бұрын

That stuff works fantastic!! I did a 4x4 ft area with it and it worked great. I did have to spray a tad heavy and wait about 5 mins to knockdown but then the results were great.

@poofadieppa Жыл бұрын

Thanks for this. It was really helpful to see someone actually use the product

@YouTubeUser1702 4 жыл бұрын

You have to follow the instructions on the back exactly to make it work. I usually use a piece of cardboard and hold it underneath so the overspray doesn’t hit the floor or the rest of the wall.

@karisimpson1 4 жыл бұрын

Wow! Thanks! I have orange peel walls, and will use this over my patches!

@patmash 2 жыл бұрын

Just moved to Florida where this texture is in every home. Have to move a ceiling light and repair the light box hole. Exactly the video AND product I was looking for. THANK YOU!

@MrAicex3000 2 жыл бұрын

Omg you just helped to look so cool to my family. I did my bathrooms and used your trick man thank you so much.

@KenCharlesTheGreat 5 жыл бұрын

I use the Homax water based orange peel for patches and get close to perfect results (where I work/property maintenance). The hot water trick works great. For "larger jobs" I use an electric Wagner Power Tex texture sprayer, that way I can use the dry mix. The hopper gun is still the best for full ceilings and walls.

@305liveandlearn 2 жыл бұрын

I love watching your videos man, ive done knockdown several different ways, just tried homax for a repair that was 20 feet high up. My only additional advice is to prime the patch prior to spraying, i have had better results this way BUT HOLY S*** YOU DID SUCH AN AMAZING JOB matched beautifully

@maggiemay97 5 жыл бұрын

I have a can of orange peel that I've been trying to work up the courage to use on some patches on my living room wall. It cost $13 here in the US at Walmart. I'd love to see how you do it. Thanks for your great videos!

@renzo4296 2 жыл бұрын

Thank you very much, we use these cans sometimes to, I usually put my cans in hot water or a few feet Infront of my hologyn light that's 500 Watt's to get it warm and shake it up every now and then to mix it up right as I'm doing my prep, I do the same thing with my orange peel cans and even with the oil base cans, just sprays super well and you can actually use a whole can if you need to actually use an entire can. If I don't use an entire can I'll turn it upside down and spray till propellant comes out to unclog the tip. Thank you again very much.

@marshallleo6589 4 жыл бұрын

Finally someone did a good video on texture spay cans

@rustybones99 5 жыл бұрын

I used this stuff for a popcorn ceiling. When I held the can close enough to reach the ceiling the popcorn kind of squashed and wasn’t popcorn-y enough. When I backed off it didn’t really have enough pressure to reach. So the final texture was a lot smaller and smoother than the popcorn that was there.

@19splat91 5 жыл бұрын

rustybones99 The popcorn one sucks

@mgweir3252 Жыл бұрын

I used that stuff and I don't have much experience with texture. It did a great job for a small patch job. After painting, it looked like the original job. 10 out of 10 stars.

@nanokcasts9187 5 жыл бұрын

When I use can texture I heat them first and shake well. Also when doing patches after spraying patches always knock down the hot mud first before you go on existing paint because the texture stays wet a little longer than on new drywall or hot mud.

@KenMagee 4 жыл бұрын

Working in the apartment maintenance field where I mainly patch door knob holes and the occasional less than 12"x12" holes, I use the Homax orange peel and it always works great as well. As far as price, yes, it is a bit high, but for what I am patching I can make a can last for a few patches.

@profedelasmontanas9023 4 жыл бұрын

You earned a like and subscribe for being clear, succinct, and helpful.

@turnerdrywallrestoration8077 5 жыл бұрын

That did turn out pretty good. I’ve used the orange peel cans for small stuff too but for the price I actually don’t mind using the hopper. I even constructed a 32 ounce Gatorade bottle with the hose clamp to my Wallboard pro 200 gun for small jobs. And for small knockdown jobs I’ve been using a sea sponge to dip and texture the patch then after a few minutes knock it down.

@ian5780 Жыл бұрын

My dad has a hose clamp and a peice of 4 inch ABS pipe.

@backtoconstitution1 5 жыл бұрын

Oil based one sets thicker they also sell the one with Hopper nozzle. Bigger and more settings to adjust but nothing matches better than a Hopper

@atschram 2 жыл бұрын

I use these for any small areas. Works great! For anything bigger I use a hopper for sure.

@gameoflife7235 5 жыл бұрын

I tried this for a very fine, dense orange peel patch and this did not work well at all. Drizzled out and when heated turned into a mist. Got the Harbor Freight hopper cheaper than the two cans I wasted money on, and came out perfect.

@kishka7winecountry 5 жыл бұрын

Also when spraying hold the can up to three feet away and gently move in a circular pattern - easier to build up texture density gradually.

@CuddlesTheCatTT 2 жыл бұрын

Yessir! Just as you would with a traditional texture spray gun/hopper!

@MythicRealTrap 2 жыл бұрын

@@CuddlesTheCatTT 3 feet tho? Just wondering coz imma start making holes in my drywall to install recess lights

@mornigstar4552 5 жыл бұрын

Looks good i have used for a similar wall

@lissiewickes8633 11 ай бұрын

My whole house is knock down (I’m in Florida, but from Vancouver originally, I want plain walls but alas.) we had some severe wallpaper removal that left the drywall a mess and I grabbed a can of this to try to DIY; this makes me super excited for a decent match. Thanks for the awesome video!

@brittneymerryweather9405 5 ай бұрын

I'm also in Florida from Vancouver originally! My whole house is also knockdown except ONE wall. I wonder how far one can would go...

@lissiewickes8633 5 ай бұрын

⁠@@brittneymerryweather9405I did the drywall in my bathroom with this and it doesn’t match and doesn’t go far. I’ve seen a lot of videos about watering down the drywall mud, literally splattering it on the wall and knocking it down. I’m going to try that next, plus it’s using mud which we probably have on hand anyways. Worth a shot!

@brittneymerryweather9405 5 ай бұрын

@@lissiewickes8633 yeah, so I just tried it today and it was awful. It dried Soo fast that I couldn't knock it down. So I tried doing it immediately after spraying and it still sucked. I mean, I'm assuming user error... Or maybe the can was old? Instead, I ordered these stencils that you apply joint compound to instead. They arrive on Tuesday so I'm going to try that.

@jason8507 5 жыл бұрын

I am a do-it-yourself kind of guy I've never used the hopper I've only used the spray can style and I have learned as I go and if I don't say so myself I'm pretty badass at doing patches

@elsoya8153 5 жыл бұрын

Thanks for your videos Vancouver I have learned a lot.

@melonas22 5 жыл бұрын

Keep a wet sponge handy in the event the texture doesn't match? That's helped me a few times. Sometimes I'm too close or far and it messes up the pattern. Simply wipe away and try again.

@robertmezzio9937 Жыл бұрын

Outstanding! I have to replace/repair five cutouts where the electrician rewired my home and moved the breaker panel from the 1st floor to the 2nd floor. My plumber moved a tankless water heater to the 2nd floor and he repiped the entire house water/sewerage. So, for these 2'X2' cutouts, this product should work well for me. Thanks for your video. I'm a believer! :-)

@martinramirezmi5457 3 жыл бұрын

I live in the united states and they use that texture a lot here! Thanks for a great review man.

@wytewonder 2 жыл бұрын

I've done whole bathrooms with those and it came out great good tip I learned was to put cans in hot water to warm up before spraying and not only will it work better/be cleaner but also go a little further in sq ft

@joshuamoore24_7 Жыл бұрын

Wow, that stuff works really good! Thanks for the review and demonstration.👍😁

@MC-hb2it 4 жыл бұрын

I love that stuff! It’s so easy to use

@whocares6698 5 жыл бұрын

My brother used to do handyman work in FL and everyone has popcorn or knock down walls and ceilings. He used this stuff all the time. Would use a can for 2-3 maybe even 4 patches if they werent that big.

@svborek 5 жыл бұрын

There is only 1 I have used that works great and that's the 1 you got. It was great b4 you sanded. Good job

@coloradoboo1071 2 жыл бұрын

Thanks, I also had good results when I had a small drywall patch. Our house seems to be settling, now, and we have a pretty large expansion gap in the ceiling over the living room, between the sheet rock, so will use this after I get that gap patched up. (Future video idea for you?)

@timpaneghel9790 5 жыл бұрын

Hey Vancouver how about doing a video on spraying an entire ceiling?

@walterw8310 2 жыл бұрын

Thank you for such an informative video. This content made me worry less about a mark on the wall I made.

@MrBobVick 5 жыл бұрын

I thought texture was for guys like me to cover up the screwups? Here at home take a crumpled up plastic shopping bag & dab it on the wet mud, wait a few & knock it down softly. That generally matches what the drywall guys did with the hopper. Think I am going to try smooth on my carport walls, if i fail texture it will be.

@eytrix 3 жыл бұрын

I'm actually in a spot where I need to match a knockdown, and the can aint doin it. Was about to crack out the compressor and hopper tomorrow, but going to give this a shot. Will update, but if it works, heres a VR BJ

@markive9907 3 жыл бұрын

Put it warm water ,1/2 hour before ,and when spraying just hold it down after adjusting pattern ,and just keep it moving as you work with a hopper or spray rig , then let set a lil longer ,before knockdown ! But you did great for the first time using 👍

@snide3 5 жыл бұрын

I have been using this for some time. It took me a couple cans to dial in the proper texture for my walls. Also, I found if you apply in a circular motion, it works better. It’s great for the home owner that needs to touch up some areas. Practice...practice...practice.

@fixerofthings 5 жыл бұрын

Second on the circular motion. Start in the middle and make larger circles until you reach the edge.

@brandonhood7412 3 жыл бұрын

Wow thanks watched your video while fixing my wall first time doing it too💪🏽

@ReneMartinez-kl5lg 2 жыл бұрын

great video, the Man who Teaches, will never go hungry, thanks for sharing!

@moee222 5 жыл бұрын

Cans work great when not room temperature Set in sun or window seal for a little before you use shake well way better pressure

@sidneyroussell656 5 жыл бұрын

Pulsing is the 1st mistake. Treat it like spray paint. Start off your patch, wide open on paper or something. Then pull into your patch, this will eliminate most of the dripping and you'll get consistent coverage. I never use cans anymore. Hopper and compressor are a lot to setup but look much nicer and you don't get bubbles in the texture.

@enmodo Жыл бұрын

and I believe you'll find the directions say make circular motions in a continuous fashion. It works for me. The only problem I have with this product is the spatter ending up where you didn't intend it to go, especially trying to spray on the ceiling. But I think the hot water trick would help me with that in the future - more pressure means more texture where it is supposed to be.

@blackbear92201 3 жыл бұрын

Very helpful video - thanks for posting!

@danielpohl29 Жыл бұрын

It's hit or miss. I use hoppers generally, but small patches the cans seam to work. That being said, I have to go back and re-do a 3x3 area because the can malfunction on me. Get 2 cans just in case one messes up. You can always return the one you don't use

@TheCHIVATO21 4 жыл бұрын

Yuo need to learn how to do it amigo That thing works I used those cans several times to do my work

@eddiemunster143 4 жыл бұрын

Bro thanks for all your help.

@robertdemaine3818 5 жыл бұрын

Thanks for this!

@iDriveAhondaCivic 2 жыл бұрын

Yeah I used this the other day and was happy with the results

@moee222 5 жыл бұрын

Today I finally bought/tried the EZ-PRO TEXTURE gun great system should look in to it forever was using these cans nd will continue to use them but the EZ-PRO was good to me nd really liked it if you do many patch job the EZ-PRO way more convenient nd will save you tones of money

@Vanilla4Gorilla 5 жыл бұрын

Looking at repairing a section of drywall ceiling that has the popcorn texture, any recommendations. Section is about 6" x 1'

@sutil5078 4 жыл бұрын

Hi , I need to paint small dark spots in my bedroom wall , white paint.. it can not be clean, my question is , is there a can sprey like this one for say white color, for tiny areas, instead of using brush or roller to paint such small area? appreciate your response, if so what brand is good, though I live overseas.. thanks great video

@jakobbreazier115 5 жыл бұрын

I’m a maintenance tech and I love the orange peel for ceiling

@scottlamp3097 5 жыл бұрын

I was wondering if you were ever going to mess with any texture. It there is definitely an to it. I keep a can or two in my kit for small patches and have been able to get “near perfect” results on occasion. I also pre heat the can in hot water like everyone else here in the comment section 😉

@nicpedia2432 3 жыл бұрын

Just a heads up... I have used both the knockdown and orange peel cans. Multiple times. The orange peel one I used was a JOKE. I shook it for three or four minutes and let it warm up as well, but no matter what I did the orange peel applied like a thicker layer of paint. There was just no depth to it. I had to use caulking instead for some patches because the caulking left enough depth to match better than the can crap. The knockdown one did seem to do better, and yes waiting about 15 to 25 minutes before knocking down makes a big difference. Curious to see how you do with the orange peel, because I'd like to find one that works and looks right. So many people doing orange peel now, I love knockdown.

@AlfaKenyBody 3 ай бұрын

Thanks for sharing. The knockdown tip was really helpful. How many minutes did you wait for before using the spatula?

@williamwinsor7376 5 жыл бұрын

Always warm up the can first. Always. It makes all the difference in the word.

@fransiscoh9450 3 жыл бұрын

Lol I was holding a lighter to the can n my mom walked in on me thinking I was doing drugs or something

@fransiscoh9450 3 жыл бұрын

@Greg Tastad it was my first time man😭 I held it at the bottom kinda far n shaked it next time I just put it in hot water much easier

@JayBelafonte 4 жыл бұрын

It’s $10 at Walmart and you have to heat the can up prior to use, also you should shake it thoroughly like 3-5 minutes.

@wilrobotics 3 жыл бұрын

Your video was very helpful thank you

@DatGMGuy 5 жыл бұрын

The orange peel can works great too

@damianm4568 5 жыл бұрын

As a another side note, in my case I prefer the oil based homax texture as it sprays more consistently; especially for the orange peel texture. They have a water based version for both styles of texture, orange peel and knock down, as perhaps a environmentally friendlier solution but does not perform as well. @Cancouver Carpenter, your tutorials are gospel! Thank you very much for all the information you provide to us mortals! I appreciate a craftsman’s pursuit of perfection in his/her trade.

@paulsallee4889 5 жыл бұрын

The oil-based dries quicker but it also seems to flash paint. It also has more texture to it because the water base dries out and shrinks up. But some texture that's what you want. Right tool for the job.

@Nathaniel_Peterson 5 жыл бұрын

Damian M I completely agree. I just started using the oil-based cans and was shocked at how much better they perform. Way more consistent and far fewer bubbles.

@veritas2145 2 жыл бұрын

@@paulsallee4889 yep.. it flashes paint. I stopped using it

@frankwestmoreland4300 2 жыл бұрын

Thank you. Very helpful.

@BerryBlondaewithADHD 3 жыл бұрын

Looks great!

@jeremy7932 2 жыл бұрын

Thanks for the video!

@thorr18BEM 5 жыл бұрын

Aaaarg. I just used three cans a few days ago and mine suck. I couldn't believe my eyes when yours came out right.

@dannilynn7641 3 жыл бұрын

Same here.

@edgarromero8551 5 жыл бұрын

Water base is my favorite the oil base one I'm not to good with it.

@juanfernandohernandez5436 Жыл бұрын

beautiful work

@paulsallee4889 5 жыл бұрын

Hopper is always the best way to match texture. It's a pain for small jobs though, so when I can use a can i do. Med to small orange peel is usually great. Knockdown doesn't have the body to work.

@hassanbazzi3545 5 жыл бұрын

Repetitive use make you better. The only drawback is it spills on the can from the nozzle. Great video. Thank you 🙏

@dr-custompaint160 5 жыл бұрын

My recommendation for homax to work better, leave it in hot water for a moment and you will have a better result when spraying the material

@camerong.7742 2 жыл бұрын

The drip of these cans kills me. I appreciate the video because it confirms I am doing it correct.

@topotondo828 2 жыл бұрын

This is probably a stupid idea, but I want to put up peel and stick tile in the kitchen of my apartment, but I will have to sand the walls first... and eventually add the texture back in when I move out. I think the canned texture will be useful since I don't want to create a lot of waste buying materials to texture a very small surface area!

@jacomecheninc6520 5 жыл бұрын

Thanks for your videos, the time and effort doesn't go unnoticed. Our company does small drywall patches sometimes and for small jobs, the texture in a can is invaluable. For the time that it takes to lug out the compressor, hopper and texture.. then to clean up the mess, you will be driving home using the spray. Makes jobs more profitable while keeping costs down for customer. Only downside is the cost! Basically 20 USD here in California. The cost of materials is offset by the high hourly rates we make out here. Thanks for your videos, they are a gold mine for anyone in the trades. Blessings brother!

@teranceable 5 жыл бұрын

hi mate can you tell me what types of mud you have to use when doing a house I think you give it 3 coats don't you what the mud called

@Bigshoots86 3 жыл бұрын

Do you ever try small patches that you need to paint quickly with a heat gun if you don't have five minute mud

@mml1224 2 жыл бұрын

great job canuck,, they tell u to buy a fancy 30$ knockdown tool and not to use a metal spackle knife and he pulls it off! amazin work

@armandomrgl85 4 жыл бұрын

I use the orange peel can & knock it down & has always worked for me, I didn't even know there was a can that actually said knockdown. I wonder if there is a difference?

@paulq9293 Жыл бұрын

Any advice on doing a touch-up over a doorknob hole patch, without having to paint the whole wall?

@bing12345678901 4 жыл бұрын

Hot water to the can. Your multiole short squirts of texture is the wrong way to use this product. Carry a piece of cardboard and begin spraying on cardboard, then move to wall in circular pattern covering the patch and about a 12" radius around the patch to blend. When you first start spraying there is usually a large quag of mud that flips out, then the consistency gets more uniform, the reason to spray on cardboard to start.

@HitMan3385 4 жыл бұрын

I put primer/sealer on my wall before my knockdown texture. Will this be a problem?

@bernardfitzsimons4275 5 жыл бұрын

I rarely use a hopper anymore I spray with a Binks sprayer with a big tip all I do is Repairs I hate can Texture

@bernardfitzsimons4275 5 жыл бұрын

Also I always use primer before I paint

@redeemedtoremain9967 2 жыл бұрын

omg this is the vid i needed

@timeslot09 4 жыл бұрын

I like your channel and now even more after seeing those skateboards hanging in the back.

@DerrickFishes 2 жыл бұрын

That test board at the end is exactly what I’m trying to match

@KevinsDisobedience 5 жыл бұрын

Something was wrong with that can. We use those all the time for patches. They work great for that purpose. Also, you really want to spot prime that area before painting, or you may get flashing in a high light area.