🍊Spraying ORANGE PEEL TEXTURE. Learn the 🔐 SECRETS 🔐 only PROS know using this $30 Tool

No video

🍊Spraying ORANGE PEEL TEXTURE. Learn the 🔐 SECRETS 🔐 only PROS know using this $30 Tool

Рет қаралды 216,843

That Kilted Guy DIY Home Improvement

Күн бұрын

Spraying an Orange Peel Texture on walls with a drywall texture sprayer can be confusing. But not anymore. I'll show you STEP BY STEP how you can spray this Wall or Ceiling Texture with ease, like a pro. I'll show you an affordable tool to use, and explain ALL 6 spraying variables, and how each part of the texture sprayer works. And, I'll show you a $30 Texture Sprayer that works BETTER than the more expensive texture guns. Don't waste your money on Spray Can Texture which often fails, clogs up, and does a much lower quality job.
If you like learning drywall skills, subscribe but BE SURE to hit the ALL Bell or you won't see notices of new videos.
☑️ DrywallAcademy.com Online Drywall Training Courses from Beginners to Pros ☑️
1- UNDERSTANDING DRYWALL MUDDING MATERIALS - ALL ABOUT Drywall joint compounds including ready mixed, Fast Setting (hot mud), all types of joint tapes, what goes with what, and what doesn't. This is your complete resource for understanding drywall materials.
⭐drywall-academ...
2- DRYWALL TAPING AND FINISHING FOR BEGINNERS - In this course you will learn how to choose and use the right materials. You'll learn the mistakes that novices often make that leads to failure, and ugly workmanship. I'll teach you how to do it right including all the little details like how to hold your tools right, how much pressure to apply, and the mistakes to avoid. You'll learn some simple repair techniques, as well as the basics of finishing new drywall.
⭐drywall-academ...
- MY DRYWALL TRAINING EBOOKS -
🟢 Take the next step in learning. Read my new ebook "How to Quickly Improve Your Mudding Skills" at: geni.us/Drywal...
🟢 Learn tips & tricks for spraying Knock Down Texture- geni.us/knockd...
🟢 And you'll find even MORE ebooks and guides in my store.
🛒🛒🛒 SHOPPING LINKS 🛒🛒🛒
- - - - - - (we earn 3-5% on these sales, thank you) - - - - - -
☑️ LEVEL5 Drywall TOOLS (Financing Available)
Click the Links below to see the current sale prices
🟢 A good all around Mud pan and knife set- geni.us/ize6U
🟢 For a 4 bladed mud mixer like mine-geni.us/FsjWx
🟢 24" Metal Skim coating blade (Plus other sizes) - geni.us/XFCZH
🟢The NEW Drywall taping Banjo is awesome - ?ref=thatkiltedguy
🟢 For a Hawk & Trowel Set- geni.us/urlJsH
🟢 For a 10"/12" Flat Box & Pump combo set - geni.us/FlatBo...
🟢 For the entire line of Level5 Drywall Tools- geni.us/o9r9vK6
🟢 For Full sets of Automatic Taping Tools- geni.us/Adlj
☑️ Miscellaneous Drywall Tools
🟢 Radius drywall Sander, great for beginners to pros- amzn.to/3sTRQ3S
🟢 Affordable Texture sprayer hopper that I USE - amzn.to/47PWcYn
🟢 The BEST Texture Knockdown Knife - amzn.to/3sWxKWs
🟢 Vevor Vacuum Drywall Sander - amzn.to/3RGfeLr
🟢 Heavy Duty Mud Mixing drill) - amzn.to/3sQcVMy
🟢 For our full drywall tools store- www.amazon.com...
☑️ TapeBuddy Tools
Mixit Paddle, works with Cordless Drills - US Link- amzn.to/3RgCMGL
🌏 International - geni.us/MixitP...
🟢 TapeBuddy simple taping tool - amzn.to/3KN9tVY
🌏 International link geni.us/TapeBu...
☑️ Miscellaneous Tools
🟢 The BEST SIMPLE Stud Finder I've Ever used- US Link amzn.to/3GdWDQJ
🟢 A nice hard case for the stud finder - US link amzn.to/3GdWDQJ
🟢 The best paint extension pole 2-4' US Link- geni.us/extens...
☑️ WEBSITE INFO -You can find a lot more tool links and suggestions, plus bonus information on our website at: www.thatkiltedg...
Want to show your support for our channel and help us put out more videos, join our Patreon page at: / thatkiltedguy
#ThatKiltedGuy #Drywalltips #DrywallRepairs #drywallschool #howtorepairdrywall
DISCLAIMER : TKG Enterprises LLC, cannot guarantee against improper use or unauthorized modifications of this information. We assume no liability for property damage or injury incurred as a result of any of the information contained in this video. Use this information at your own risk. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result, or any obligation for future assistance. Watching the video does not form a professional relationship or constitute receiving professional advice.

Пікірлер: 213

@ThatKiltedGuyDIY 8 ай бұрын

Tool links below. ☑ Attention all Drywall enthusiasts! Introducing the Drywall Academy, your ultimate online destination for mastering the art of Drywall. Whether you're a complete beginner or a seasoned professional, our comprehensive courses cater to all skill levels. At The Drywall Academy (drywallacademy.com), we believe that knowledge is the key to success. That's why we are meticulously curating a vast collection of courses, featuring hundreds of lessons, covering everything from the fundamentals to advanced Drywall business building skills, texture application, texture matching, and much more. Founded by Guy Purcella (That Kilted Guy on KZfaq) with 40 years of experience. With our easy-to-follow text and video lessons and practical demonstrations, you'll gain the confidence and expertise needed to tackle any Drywall project with ease, less frustration and a better quality job. Don't miss out on this golden opportunity to level up your Drywall skills. Join the Drywall Academy today and unlock your true potential in the world of Drywall. Visit drywallacademy.com now and embark on a journey towards mastery! 🚀 And if you are confused about which drywall tools and materials you need, pick up my Drywall Tools and Materials book on Amazon at: amzn.to/3T4eEZg Or for a signed or Spiral bound version visit www.ThatKiltedGuyStore.com Watch this Playlist called Taping & Mudding Drywall School NEXT- kzfaq.info/sun/PLCrazHylAOEndyM-LGT6PtbGfIYD5uiy- ☑ Get my 56 page Free eBook "Understanding Drywall Tools and Materials" at www.DrywallToolsBook.info ⭐⭐ ⭐ Please Visit my sponsors below, they help me afford to put out these videos ⭐⭐⭐ ☑ DO YOU VALUE YOUR INTERNET PRIVACY? I do. You can surf anonomously with Surfshark- geni.us/getsurfshark ☑ Protect your home or business with Simplisafe, we love it- share.simplisafe.com/x/qobGJE ⭐ MY DRYWALL TRAINING BOOKS FOR SALE at www.ThatKiltedGuyStore.com ⭐ ☑ WEBSITE INFO -You can find a lot of bonus information on our website at: www.thatkiltedguy.com 🛒🛒🛒 SHOPPING LINKS 🛒🛒🛒 - - - - - - (we earn 3-5% on these sales, but these are tools I recommend thank you) - - - - - - ☑ LEVEL5 Drywall TOOLS (Financing Available) 🟢 For a 10"/12" Flat Box & Pump combo set - geni.us/FlatBoxCombo 🟢 For the entire line of Level5 Drywall Tools- geni.us/o9r9vK6 🟢 A good all around Mud pan and knife set- geni.us/ize6U 🟢 For a 4 bladed mud mixer like mine-geni.us/FsjWx 🟢 For Full sets of Automatic Taping Tools- geni.us/Adlj 🟢 24" Metal Skim coating blade (Plus other sizes) - geni.us/XFCZH ☑ Miscellaneous Drywall Tools 🟢 Radius drywall Sander, great for all- geni.us/Radiussander 🟢 Affordable Texture sprayer hopper that I USE - geni.us/Hopper 🟢 The BEST Knockdown Knife - geni.us/KDKnife 🟢 Vevor Vacuum Drywall Sander - s.vevor.com/bfQtGq 🟢 For our full drywall tools store with my suggestions- www.amazon.com/shop/thatkiltedguydiyhomeimprovement ☑ Miscellaneous Tools 🟢 The BEST SIMPLE Stud Finder I've Ever used- geni.us/FranklinStudFinder 🟢 A nice hard case for the stud finder - geni.us/FranklinCase ☑ Miscellaneous supplies 🟢 Guardz torn paper sealer. Stops Torn Brown Paper from bubbling - geni.us/Gardz DISCLAIMER : That Kilted Guy Video Productions LLC, cannot guarantee against improper use or unauthorized modifications of this information. We assume no liability for property damage or injury incurred as a result of any of the information contained in this video. Use this information at your own risk. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result, or any obligation for future assistance. Watching the video does not form a professional relationship or constitute receiving professional advice.

@cathlicyogi 2 жыл бұрын

I am a diy homeowner and have sprayed texture several times with inconsistent results. Your advice to adjust the pull of the trigger really changed the results of my textures. I found this information nowhere else. Thank you

@commandertim575 Жыл бұрын

Your advice on this video helped me to get the job done right! Thank you very much!! I used to give my wife a break every weekend and make breakfast for the kids. Mostly waffles or pancakes. When you said to make the mud the same consistency, it was easy to do so. I kept mixing and adding a little water at a time until it was just right. It was my first time using a hopper but your video was a great guide and I am pleased with the result. I heard you have not been feeling great. I hope that you start to feel better soon. Take care and God bless.

@pnwester2697 4 жыл бұрын

I'm a homeowner and continue to refer to this video when applying orange peel. I have a lot of areas in our house that have needed fixing and some are fine and some are heavy so matching it is challenging. This vid does it for me. Thanks

@mattprombo9691 3 жыл бұрын

Thank you for being very detailed on all the settings and veriables. There are very few professionals like you put there and thanks again for explaining your craft.

@ThatKiltedGuyDIY 3 жыл бұрын

Thanks, glad I could help you out 😎. And thanks for subscribing!

@jimstover5725 9 күн бұрын

Hey excellent above any of the other videos I’ve watched. I’m about to turn 60 and I haven’t sprayed any texture in probably 30 years maybe longer. I couldn’t figure out what tip to use for the orange pill, but I figured it was a small one, and of course that’s what you said. I didn’t even know about the air volume. So thank you so much and God bless you for putting this video out. If I ever need any more information, I’m going to you, brother.

@salvadorontiveros219 3 жыл бұрын

#DOITRIGHT I have been doing home renovations for about 5 years and the investors I work with typically want the houses skip troweled so my experience with orange peel applications have been minimal. I've always bought those $19 cans that don't work have the time. I've thrown away hundreds of dollars on those cans. I finally bought a Wagner texture spayey yesterday. Hoping to put it to work on Monday. This is the most helpful video I have found. Thank you. You earned another subscriber!

@ThatKiltedGuyDIY 3 жыл бұрын

Thanks, I appreciate that 😎, I love hearing your comments, & Glad you’ve subscribed!

@ThatKiltedGuyDIY 3 жыл бұрын

⭐HEY, I just now released an ebook about How to Spray a Knockdown texture that could be really helpful to you. It takes my whole video even further with things like photos showing how a medium knockdown should look when sprayed, and when knocked down. It lists the tools and supplies needed, how to mix the texture, how to adjust the sprayer in more detail, and so much more. Check it out and I think you'll find it very helpful if you plan to do this texture. Here's the link to it in my Etsy store. www.etsy.com/listing/969964231/how-to-spray-knockdown-texture-ebook?ref=shop_home_active_1 I'll be releasing one specifically for spraying Orange Peel texture as well, and may do a combined version also.

@puppylover4091 2 жыл бұрын

Thank you for your very helpful videos. You I feel are a natural teacher. Your coverage of the instructions are superb.😃

@ThatKiltedGuyDIY 2 жыл бұрын

Thanks, glad I could help you out 😎. And thanks for subscribing!

@tiffanykilby7560 3 жыл бұрын

My daughter's bathroom walls are so bad and I feel like this is the best option. I'm just scared to try it myself . Lol good thing I have some scrap drywall I can practice on first.

@ridgesaxstuff5927 3 жыл бұрын

I am a retired plasterer. I find your videos to be good and sound information. Just had to say so.

@ThatKiltedGuyDIY 3 жыл бұрын

Thanks I appreciate that

@ColdWarVet607 4 жыл бұрын

That was great. A texture video that explained the art rather than just say aim at wall and spray like the rest. Not bad for a Fly Boy, thats coming from a Navy Submariner Squid! Good job brother!

@ThatKiltedGuyDIY 4 жыл бұрын

Ever Forward well you know, us flyboys like to Aim High! Thanks for your service my friend.

@robertlindell1282 4 жыл бұрын

This was the best texture video I have found, all the variables covered. Thank you

@ThatKiltedGuyDIY 4 жыл бұрын

Glad it was helpful!

@troychontas4907 4 жыл бұрын

I used this technique and worked great in matching the existing Orange Peal I had. Thanks for the video!

@ThatKiltedGuyDIY 4 жыл бұрын

Glad to help

@Robert8455 4 жыл бұрын

I think that was very well explained and filmed so thank you for that! I have more of a fine to medium fine orange peal I need to try and match. I think I'll buy that cheap gun and give it a try.

@ThatKiltedGuyDIY 4 жыл бұрын

Just watch this again before starting if needed and you’ll be pleasantly surprised. 😎

@ThatKiltedGuyDIY Жыл бұрын

Have a Question? Join My KZfaq Membership to get PRIORITY Replies, perks and more. kzfaq.info/love/SinsqowcKxmSaKkx3W9_0wjoin Ready To Take Your Skills to the Next Level? (Open this) ⭐ MY DRYWALL TRAINING EBOOKS ⭐ 🟢 Take the next step in learning. Read my new ebook "How to Quickly Improve Your Mudding Skills" at: geni.us/DrywallsecretsEbook 🟢 Learn tips & tricks for spraying Knock Down Texture- geni.us/knockdownebook 🟢 Guide to Drywall Sandpaper, what to use, when etc- geni.us/SandingGritGuide 🟢 And you'll find even MORE ebooks and guides in my store. ☑ DRYWALL COURSES- Sign up for our email list to be notified of future Drywall Courses you can take, AND we'll send you a discount offer each time we release a new course. Sign up at: www.thatkiltedguy.com ☑ WEBSITE INFO -You can find a lot of bonus information on our website at: www.thatkiltedguy.com 🛒🛒🛒 SHOPPING LINKS 🛒🛒🛒 - - - - - - (we earn 3-5% on these sales, thank you) - - - - - - ☑ LEVEL5 Drywall TOOLS (Financing Available) For 10% OFF Any tools, enter the code KILTEDGUY10 🟢 For a 10"/12" Flat Box & Pump combo set - geni.us/FlatBoxCombo 🟢 For the entire line of Level5 Drywall Tools- geni.us/o9r9vK6 🟢 24" Metal Skim coating blade (Plus other sizes) - geni.us/XFCZH 🟢 A good all around Mud pan and knife set- geni.us/ize6U 🟢 For a 4 bladed mud mixer like mine-geni.us/FsjWx 🟢 For Full sets of Automatic Taping Tools- geni.us/Adlj 🟢 For a Hawk & Trowel Set- geni.us/urlJsH ☑ TapeBuddy easy Novice Drywall Tools 🟢 Mixit Paddle - geni.us/MixitPaddle 🟢 TapeBuddy simple taping tool - amzn.to/3KN9tVY 🟢 TapeBuddy Taper, mixer and bucket scoop- amzn.to/38UdUkm ☑ Miscellaneous Drywall Tools 🟢 Mesh Tape dispenser (optional) - geni.us/Meshtapegun 🟢 Radius drywall Sander, great for beginners or pros alike- geni.us/Radiussander 🟢 Affordable Texture sprayer hopper that I USE - geni.us/Hopper 🟢 The BEST Knockdown Knife - geni.us/KDKnife 🟢 Rubber Skimming blade mentioned in other videos -geni.us/rubberblade 🟢 Wen Vacuum Drywall Sander (Good one for a low price) - geni.us/Wensander1 🟢 The Dewalt Mud Mixing Drill I use (super tough) geni.us/DewaltMudDrill 🟢 For our full drywall tools store- www.amazon.com/shop/thatkiltedguydiyhomeimprovement ☑ Miscellaneous Tools 🟢 The BEST Stud Finder I've Ever used- geni.us/FranklinStudFinder 🟢 A nice hard case for the stud finder - geni.us/FranklinCase 🟢 The best paint extension pole 2-4' (for the sander above too)- geni.us/extensionpole 🟢 A quiet compressor for the texture hopper- geni.us/mycompressor ☑ Miscellaneous supplies 🟢 Guardz torn paper sealer. Stops Torn Brown Paper from bubbling - geni.us/Gardz 🟢 Drywall Mesh tape - geni.us/Meshtap ☑ Strait Flex cornerbead and specialty repair tape 🟢 Strait Flex Mud Pro- homedepot.sjv.io/babRXk 🟢 Strait Flex Perfect 90 (forms in/out corners at any angle)- homedepot.sjv.io/y2g60V 🟢 Strait Flex Outlet Patch - amzn.to/3JtsFJK 🟢 Strait Flex Multi Patch - amzn.to/3n6m3JI 🟢 Strait Flex Crack Tape - homedepot.sjv.io/6eW5DK ☑ My Camera Gear 🟢 Sony A6400 Camera. (I have 3 they are so good)- geni.us/SonyA6400tkg 🟢 My Wireless Lav mics, AWESOME mics- geni.us/1wVNfJy 🟢 GoPro Hero 9 - geni.us/ocAa Thank you for being part of my channel.

@robertgarner5279 2 жыл бұрын

Thanks! Very informative. I've sprayed small areas of texture before, but after watching your vid, I'm feeling really comfortable doing a whole ceiling.

@oldworldchris4187 3 жыл бұрын

I've been researching orange peel for a project, that was a good instructional vid!

@ThatKiltedGuyDIY 3 жыл бұрын

Thanks, glad I could help you out 😎. And thanks for subscribing!

@ThatKiltedGuyDIY 3 жыл бұрын

@jsmith2081 2 жыл бұрын

Very helpful! I just framed in an old doorway & hung the rock. I’m watching your videos to learn how to tape, bed & texture it the right way! I appreciate your videos!!

@dr.jackkhorram4129 2 жыл бұрын

Than you I learned so much from your previous video and now this I am remodeling my house by myself and it’s hard and 🤩 fun .

@feazableproductions8430 Жыл бұрын

Thanks this was very informative. I was struggling at figuring out how to do this very light orange 🍊 pill without using a can of texture. My basement walls look great thanks for the lesson. Thanks for your service.

@ThatKiltedGuyDIY Жыл бұрын

Glad it was helpful!

@user-wu6it3vq5x Жыл бұрын

Hi K-Guy Thanks alot for the tip on having a small air valve on the hopper gun to control the air. I was having trouble with my small pancake compressor keeping up with the demand and that dolved it. Works perfect. Thanks again.

@user-wu6it3vq5x Жыл бұрын

...solved it.

@kennethbubser9601 2 жыл бұрын

Love the texture in Florida we don’t have nobody in New Jersey doing it. Would love to pay someone to do my house

@freddaniali 2 жыл бұрын

Perhaps the best explanation that I have seen yet. Love the camo kilt!

@ThatKiltedGuyDIY 2 жыл бұрын

Thanks!

@CaseyMcCoyARTS Жыл бұрын

Thank you for sharing your knowledge with us! Definitely the most helpful drywall spray texture video I've seen

@roompey 5 ай бұрын

I worked in remodeling construction for the last 25 years, most of the drywall work I let my mexicans helpers to do, until now I realized why they could do it so much easier than myself...lol.

@rogerjohnston4952 4 жыл бұрын

Thank you from a DIY and landlord. You have taught me a lot

@ThatKiltedGuyDIY 3 жыл бұрын

@steveleisen933 3 жыл бұрын

Thanks for the great how to!!!

@gorolliego 2 жыл бұрын

Thank you for this very informative video! Really helped me to understand how to achieve and/or to match different styles of texture with just basically properly controlling two knobs on a hopper gun. Excellent!

@CharlieGoy 2 жыл бұрын

I really appreciate the technical details... trade secrets if you will. Thank you, brother. Only critique - wish I saw a close-up of the three textures at the end of this video.

@OlTrailDog 4 жыл бұрын

Great detail and practical video. Very good explanation of the variables that go into the various patterns. Thumbs up. Everything I wanted to know, now let's go make a mess.

@ThatKiltedGuyDIY 4 жыл бұрын

OlTrailDog lol. You got this!

@rogerwendover4620 4 жыл бұрын

I love your straight ahead explanation of the details. Glad to find and subscribe to your channel!

@ThatKiltedGuyDIY 4 жыл бұрын

Thanks!

@SoleVegas 3 жыл бұрын

Appreciate the video. Asked a question on the knockdown video but think you answered it here. Great channel. Appreciate you!

@ThatKiltedGuyDIY 3 жыл бұрын

Glad to help!

@danielgerard6278 3 жыл бұрын

You rock, all your videos are helping me learn how to do all this, thanks!!!!

@dannyh.7490 4 жыл бұрын

Great video. I have this very same texture spray unit and have used it several times now and I like it too. Super easy to use. Pretty fool proof, just do like you say, a few spray tests to get it where you want and get to it.

@ThatKiltedGuyDIY 4 жыл бұрын

Thanks for sharing!

@texas77563 2 жыл бұрын

idk if its been said before but in another video a guy was using a piece of a side garage door seal for knockdown. its the one with the squarish side that nails to the grage door buck and the super thin side that seals on the door. it looks like the thin flappy part is really soft and makes it forgiving when using for knockdown

@ThatKiltedGuyDIY 2 жыл бұрын

The one I showed in this video is very forgiving. kzfaq.info/get/bejne/ntCDmZaFq7WYeHk.html

@badmanclick 3 жыл бұрын

Thank you sr appreciate the time to showing this skills

@ThatKiltedGuyDIY 3 жыл бұрын

Thanks, I appreciate that 😎, & Thanks for subscribing!

@Evansthoughts 3 жыл бұрын

Very comprehensive. Thank you.

@roba2722 Жыл бұрын

Wall prep would be nice to know.

@utubehanna 4 жыл бұрын

Thanks for the explanation of the variables. Wish the Sheetrock background had been a more contrasting color... kinda hard to see on the small screen. But the info was great - thanks again!

@ThatKiltedGuyDIY 4 жыл бұрын

I did paint it green to help. Sorry.

@ThatKiltedGuyDIY 3 жыл бұрын

@mimihealy5046 Жыл бұрын

I just applied orange peel to new walls and matched old orange peel on old walls. This video was extremely helpful!! Should I remove the tape and protective paper now while the orange peel is drying or wait until it's dried and put up new tape and paper for painting?

@ThatKiltedGuyDIY Жыл бұрын

While wet is easier

@brentandre5812 4 жыл бұрын

In regards to coverage for orange peel. Is there supposed to be a complete layer of texture covering the board or will there be small gaps of the actual board showing through? Also, when you say you go over it in 2 or 3 passes, is that all in one session, or do you let it setup and then do additional passes over it? Thanks, great videos and knowledge you have.

@ThatKiltedGuyDIY 4 жыл бұрын

Hey, coverage can be 100% or way less. You create the look you want, and it's all done in one session with no setup time and additional passes. Just like in this video.

@diehardfan173 3 жыл бұрын

Applying drywall compound requires several different passes and then between it must dry. Sometimes, sanding as needed if there are too many rough spots. Indentations can be covered with more Compound. The idea is to cover the seams and the wall with an even layer of compound So that it looks like one solid surface

@margaretjudice8944 3 жыл бұрын

Great information. Thank you for sharing!

@ProsperityThinkers 3 жыл бұрын

GREAT video! Thank you for sharing!

@rafaelj80 4 жыл бұрын

EXCELLENT VIDEO..👍.Would you recommend texturing over primer or straight on the drywall and then primer..? If you can give me your professional suggestion, it will be great. Thanks

@ThatKiltedGuyDIY 4 жыл бұрын

You can texture straight over raw drywall. But it's not a bad idea to prime first, but most pros don't. DO prime after texturing though.

@svenonutz5535 3 жыл бұрын

I only prime first on light textures. It really helps you find imperfections you might not have seen.

@wandah8225 5 ай бұрын

Question for the board: When is the drywall primer applied ---- BEFORE texturing, or , AFTER texturing?? Thanks!!

@ThatKiltedGuyDIY 4 ай бұрын

After, or both as it helps the knockdown process go better that way

@doctorswithoutdiplomas4379 3 жыл бұрын

Does it matter wether the drywall is painted and primed before doing the texturing, what would you recommend?

@ThatKiltedGuyDIY 3 жыл бұрын

Priming before texture is a good idea but most new construction doesn’t do it, so it’s not required

@andyliptak251 11 ай бұрын

Thank you again for an informative video

@ThatKiltedGuyDIY 11 ай бұрын

Our pleasure!

@chrisc.c52 3 жыл бұрын

This video was super helpful. Thank you for making these types of videos.

@ThatKiltedGuyDIY 3 жыл бұрын

Glad it was helpful! I also just released an ebook, Today, on my new Etsy store that takes this training even further and can be real helpful if you are going to tackle this. Check it out at: www.etsy.com/listing/969964231/how-to-spray-knockdown-texture-ebook?ref=shop_home_active_1

@ThatKiltedGuyDIY 3 жыл бұрын

I'll be releasing one real soon that's specifically for spraying Orange Peel texture, but they are very similar.

@ThatKiltedGuyDIY 3 жыл бұрын

Yes. Https://m.facebook.com/thatkiltedguy/

@ThatKiltedGuyDIY 3 жыл бұрын

I can’t seem to approve your comment so let me know if you get this. I think it’s because you included your email in your comment

@chrisc.c52 3 жыл бұрын

Yes, I got your text and I deleted my email

@zimmerae 29 күн бұрын

Greetings @ThatKiltedGuyDIY. Hope you are well. I just finished spraying a medium texture over a repair while trying to match the existing texture. After sufficient drying time I applied a coat of drywall primer. My repair texture appears a bit lighter than the existing texture. My question: Can I apply additional texture over this painted repair texture in an attempt to achieve a closer match. Thanks so much. I really appreciate your videos.

@MrJockito Жыл бұрын

Great video ! Thanks

@ray650420 7 ай бұрын

Thank you

@axkiller1985 4 жыл бұрын

Thank you!

@antoniomartinez6958 4 жыл бұрын

Great video my friend

@JuliaInMerica 3 жыл бұрын

You missed the air compressor part - how to attach gun to it. Because people who never did it might think you dont need air compressor at all

@michaelbacile8439 3 жыл бұрын

Great demo. I’ve got a remodeled hallway in my home so my new drywall buts up to old drywall in a few corners. I was thinking of over spraying onto the old wall and maybe using a wet sponge to blend in the new texture. The house is 42 years old so the old orange peel is almost gone via all the layers of paint. Do you have a blending video you can point me to?

@ThatKiltedGuyDIY 3 жыл бұрын

This one might help- kzfaq.info/get/bejne/pZlylKqlrZzDj3k.html

@meganmills4025 4 жыл бұрын

Amazing video. Thanks. I think I’ll try this over the spray cans. With the cans, I always have to use a putty knife to knock down when matching existing texture. It looks ok, but nothing like you did. Do you ever use a tool to blend or knock down using this method?

@ThatKiltedGuyDIY 4 жыл бұрын

There's 2 types of sprayed on texture, this one, (orange peel) and knock down. For orange peel I *_Never_* use a tool on it after spraying, but for knockdown, always. Check out this video- kzfaq.info/get/bejne/m7Gbd6V4ranGeqM.html

@josiahkloeckl9719 3 жыл бұрын

Have you ever heard of putting dishwash soap in with your taping mud to take out air bubbles?

@ThatKiltedGuyDIY 3 жыл бұрын

Yes, and I don’t think it helps. I’ve tried it and I can’t tell if it makes any difference. I will be testing that one day soon

@josiahkloeckl9719 3 жыл бұрын

@@ThatKiltedGuyDIY Same here, I don’t think it helps either. I feel like if it’s mixed well enough with your mixer you shouldn’t have any air bubbles in it. Have you used your hopper (after the mud is cleaned obviously haha) for painting at all and then back rolling? I am thinking about trying that next time I paint .

@ThatKiltedGuyDIY 3 жыл бұрын

I seriously doubt it would work well and I’d go with an 18” roller first

@michaelosterhaus4309 2 жыл бұрын

Is it beneficial to paint the wall to the desired color first before spraying the texture to help with the final painting process, or is that a waste of time and money?

@ThatKiltedGuyDIY 2 жыл бұрын

Texture first as it texture covers the wall, then prime & paint- so yes it would be a waste of time and money. Thank you for your input.

@amandafogg1634 2 жыл бұрын

Thank you, this is super helpful! For areas of exposed drywall where I've used the sealant on brown paper do I need to put any mud over the brown paper before spraying the texture or can I just spray the texture directly onto the drywall once that sealant has dried? It's the sealant you recommended in another video, the name is just escaping me right now. This is in a bathroom so it's a mixture of the green board and the regular white board. Thank you for putting all of these videos together!

@ThatKiltedGuyDIY 2 жыл бұрын

Watch this- ⭐ Repair Damaged & Torn Drywall Paper BEFORE YOU MUD IT! kzfaq.info/get/bejne/gJ2qhtSLzaiseqM.html

@TheNathanRector 3 жыл бұрын

Will that texture hopper sprayer work if you're doing your ceilings or do you think it will get jammed?

@ThatKiltedGuyDIY 3 жыл бұрын

It works perfectly fine on ceilings.

@TheNathanRector 3 жыл бұрын

@@ThatKiltedGuyDIY thank you!

@astudent1877 3 жыл бұрын

I would like to add texture to my walls. They are painted, but do not have any texture currently. How would you recommend to start? Do I need to do anything to the wall before I start spraying the texture? Thank you!

@ThatKiltedGuyDIY 3 жыл бұрын

Scuff sand the walls with 80 grit before texture

@kennethbubser9601 2 жыл бұрын

Why don’t we have this in New Jersey. Tired of seeing the defects in tape n spackle jobs. I am Hvac guy. I don’t tape or spakle

@ashleym992 3 жыл бұрын

What size did you use, the small, medium, or large tip?

@ThatKiltedGuyDIY 3 жыл бұрын

Medium but I can pretty large drops form a small and fairly fine from a large if you adjust the air flow and trigger pull right.

@lawofattractionc61 4 жыл бұрын

thank you sir .... great video

@missmarexoxo3116 2 жыл бұрын

#DOITRIGHT 👊🏼✌🏼💪🏼👍🏼

@tejiendoelfuturo 3 жыл бұрын

8:35 champurrado

@rodolfobuzeta7156 3 жыл бұрын

Hi Sir, thank you so much for all your help! Very detailed to explain, it helps me a lot! I’ll be doing a medium drywall ceiling repair next week and I want to buy a decent air compressor to keep for future jobs too, what do you recommend? I’m not sure if the California will have enough CFM to apply texture... Help me please :)

@ThatKiltedGuyDIY 3 жыл бұрын

The compressor in my link is the same one I use. If you don’t run the air wide-open constantly it keeps up for smaller jobs just fine. I’ve been using it for about three years. Or you could go to the next size up. But that brand is lighter and much quieter. For a quiet compressor- amzn.to/2UnMtUg

@rodolfobuzeta7156 3 жыл бұрын

@@ThatKiltedGuyDIY Awesome, thank you so much once again! Last question 😁 A good hose that you recommend me?

@alexisscott2589 9 ай бұрын

What about the can of texture spray? Would you recommend that for small areas? And how do you match it to the existing texture?

@ThatKiltedGuyDIY 9 ай бұрын

I’ll be teaching detailed classes like this in my new www.DrywallAcademy.com so be sure to go sign up for free.

@RC_Cola2020 5 жыл бұрын

#doitright thanks for the teaching. very helpful

@ThatKiltedGuyDIY 5 жыл бұрын

Thanks, glad I could help. And #doitright

@dal8963 2 жыл бұрын

Foid coloring in the mudd would have been great for video purposes as we can't really see it

@ThatKiltedGuyDIY 2 жыл бұрын

That’s why I painted the sheet rock darker so it does stand out way better than if I hadn’t done that.

@ArtStamos 4 жыл бұрын

Pride in workmanship is hard to find, cut and run is what I see, every time I try to hire a contractor

@jasonfuessel2961 2 жыл бұрын

How good of a finish does the drywall need to be before spraying a light orange peel texture?

@ThatKiltedGuyDIY 2 жыл бұрын

Flat joints, very minor defects, very minor edges.

@a.ca.c9809 Жыл бұрын

What do you suggest if you are not a good taper although been painting over 30 years...Thanks 🙏

@ThatKiltedGuyDIY Жыл бұрын

What do I suggest about what? What texture to spray? What joint tape to use?

@mimihealy5046 Жыл бұрын

The USG orange peel video shows to prime the Sheetrock before applying orange peel. It appears that most contractors apply orange peel directly to Sheetrock before priming. What have you found to be the difference between the two techniques? I have several large sections (ex. 3’ x 6’) of patches walls to cover.

@ThatKiltedGuyDIY Жыл бұрын

When I did new construction with my father, we never ever primed first. And it worked just fine. I think the main difference is if you’re doing knock down, you will get a longer, more even hold out and a more even knock down. But with orange peel, I don’t feel like it matters.

@sakurland Жыл бұрын

Would non-prime sheetrock absorb the moister from the mud quicker resulting in a slightly different look vs a primed surface when the moster has to evaporate ?

@sharroon7574 Жыл бұрын

We have an orange peel ceiling, the cheep builders used nails instead of screws which are poppig up so now we have to fix it, our ceilings are a greyish white, do you think they were painted?

@ThatKiltedGuyDIY Жыл бұрын

Hard to say

@CharmayneRushing 3 ай бұрын

Can I use texture on lath & plaster

@Nineinch51 4 жыл бұрын

Good video....... show me the exact nozzle you used in this video..... he said about 35 pounds at the compressor going through a 50 foot hose what was your pressure at the gun any idea or just basically winging it....Thanks Dennis

@ThatKiltedGuyDIY 4 жыл бұрын

Pressure isn’t that important. I control the air while spraying with an air valve at the gun and I’m adjusting the cfm more than the pressure.

@Nineinch51 4 жыл бұрын

That Kilted Guy DIY Home Improvement .....ooooooook....I’ll practice on a test panel... thank you sir...Dennis

@wiseacre448 11 ай бұрын

PUT THAT HOPPER AWAY! Get a toilet bowl brush, swirl it in some texture mud and practice flicking mud for about a minute. Get the rounded “bullet” head brush . More precise, less hassle.

@MrJose123704 4 жыл бұрын

Should I prime my wall before applying texture?

@ThatKiltedGuyDIY 4 жыл бұрын

I never have, but it would give you a more consistent knockdown, and I believe it's recommended.

@curtisbme 4 жыл бұрын

Lots of arguments about it from contractors from different areas. Net is that you don't have to but it if you don't it *might* telegraph more over taped areas as it will dry faster on those areas than on the drywall paper. If you are doing heavier texture I could see this being more of a problem as it might flatten out more on the paper and be more bumpy on the seams. But all of that is *might* and you will find plenty of people swearing to both positions with their "been a drywaller for XX years and never had a callback!"

@cristhianperez6071 Жыл бұрын

Do I have to skim coat the entire ceiling before adding the texture?

@ThatKiltedGuyDIY Жыл бұрын

Not if you finished all the joints correctly

@gonzalopmolina 3 жыл бұрын

This is Gonzalo from Argentina. Thank you for the video! Any advice, working with GFRC, using this tool for the face coat, what configuration you recommend (air nozzle size, air pressure PSI, air flow, etc), in order to obtain a very soft surface without pinholes? Than you very much!

@ThatKiltedGuyDIY 3 жыл бұрын

I I have no experience with that, sorry

@gonzalopmolina 3 жыл бұрын

@@ThatKiltedGuyDIY thank you anyway 😀

@masterciefl2k Жыл бұрын

What are the steps 1) primer 2) texture 3) paint OR 1)texture 2) primer 3) paint ?

@ThatKiltedGuyDIY Жыл бұрын

www.etsy.com/listing/969964231/how-to-spray-a-drywall-knockdown-texture?click_key=f69b391b000001974b54b2b6da99c870a0ca2be2%3A969964231&click_sum=d8d9299e&ref=shop_home_feat_1&sts=1

@CaptainRRExcursions 4 жыл бұрын

wow great video im getting ready to spray texture on my ceiling, i removed the popcorn and i can see were the use joint compound to cover the joints, i sanded it down but still has alot of imperfections, what would be the best spray texture to use on the ceiling to cover all that up? i have the same gun u do. also do i have to paint it afterwards? thank u

@ThatKiltedGuyDIY 4 жыл бұрын

Actually, texture covers very little. Most defects will still show through a texture so it's best to fix them first. Here's a video to get you started on that- kzfaq.info/get/bejne/gJ2qhtSLzaiseqM.html As for the best covering spray texture, knockdown is good, or a heavy orange peel. Not large drops, but smaller drops and just cover the wall about 98%. I'll show that one some day. And yes, ALL raw drywall needs primed and then painted.

@CaptainRRExcursions 4 жыл бұрын

thank u very much

@svenonutz5535 3 жыл бұрын

A heavy stomp, stomp knock down, or an imperfect smooth wall. Hide the most if thats what your asking?.

@mutumacharles6620 2 жыл бұрын

Thank you teacher. Iam in Kenya, how can I get this texture spray gun please.

@mariosilva3530 3 жыл бұрын

Hi.. I have a question please: Do you sand after the texture is dry before painting? Thanks.!

@ThatKiltedGuyDIY 3 жыл бұрын

No that will make it look like tiny knockdown

@jsullivan1174 6 ай бұрын

Does it matter the size of the air compressor?

@ThatKiltedGuyDIY 6 ай бұрын

What matters is that it’s capable of putting out 4 to 6 CFM at 40 psi. But the hopper can be a little different so look it up

@waynetaylor7086 3 жыл бұрын

I need to learn this but i cannot see what your actually laying on the drywall , need black background and camera a lot closer

@ThatKiltedGuyDIY 3 жыл бұрын

@jackfisher7274 2 жыл бұрын

HI. I'm just curious how you deal with two different finishes. Say orange peel on the walls, but knock down on the ceiling. How to you keep them from contaminating each other? Thanks.

@ThatKiltedGuyDIY 2 жыл бұрын

Masking if it’s dry or you spray the ceiling first, knock it down, then the wall and knock down the overspray on the ceiling

@jackfisher7274 2 жыл бұрын

@@ThatKiltedGuyDIY gotcha!! Thanks 😊

@metelskiy 2 жыл бұрын

Would u need primer after texture application before painting ?

@ThatKiltedGuyDIY 2 жыл бұрын

Watch this- kzfaq.info/get/bejne/acWBhtCmy5bGhn0.html

@samk.871 2 жыл бұрын

You forgot to show us the finished products up close

@73chevy22 2 жыл бұрын

I have about a 8 foot long wall that needs texturing, would you recommend going this route or would the orange peel spray cans be an easier option?

@ThatKiltedGuyDIY 2 жыл бұрын

Don’t believe these spray cans. An 8 foot wall would cost you a fortune. Use this hopper

@73chevy22 2 жыл бұрын

@@ThatKiltedGuyDIY Yeah, that's what I was leaning towards too, thank you for the video and reply!

@svenonutz5535 3 жыл бұрын

Hey bro! I use that same texture machine. I seen to have to replace it once a year. Are my guys just not taking cafe of it right? Or does that seem about normal?

@ThatKiltedGuyDIY 3 жыл бұрын

None of the texture sprayers under $200 are really built that well and if you use them a lot they will wear out. But if they’re not cleaned and lubed regularly they will wear out faster. I’m going to review some texture sprayers soon that are faster, starting at $250 and going up to several thousand so be watching for that review. Hey, thanks so much for commenting and for subscribing. With your help we can blast past 100,000 subscribers and more!

@78cugrad 4 ай бұрын

9’ ceiling in an 1800 sq ft house would take me 3 months to texture all the walls ?

@ThatKiltedGuyDIY 4 ай бұрын

lol

@johnathonuncapher7523 6 ай бұрын

i have a 1700 sq ft house i am going to retexture this week. I am worried my little 6 gallon pancake compressor won't keep up. its 2.7 cfm at 90 psi. Should I borrow/rent one or will i be okay with my little one?

@ThatKiltedGuyDIY 6 ай бұрын

With that CFM it will not keep up. It will work for 30 seconds to a minute and then you have to let it catch up so I advise renting or borrowing one with five to 7 CFM minimum

@johnathonuncapher7523 6 ай бұрын

@@ThatKiltedGuyDIY thank you for taking the time to reply! Means a lot. I will borrow one!

@Adam-ui8iy Жыл бұрын

Pro tip - play at 2x speed

@ThatKiltedGuyDIY Жыл бұрын

lol 😂

@wwaterski 4 жыл бұрын

Your Amazon store link does not work.

@ThatKiltedGuyDIY 4 жыл бұрын

Hey, thanks for that info. I just checked it and it worked for me, so might be a spam blocker, or something. Here's the actual store link0 bit.ly/GuysAmazonStore Or did you click on a tool and that link didn't work? If so, which one? Thanks

@bretthl1 3 жыл бұрын

Can I use this spray tool with a 5 gallon 2.6 cmf pancake or do I need my large compressor?

@ThatKiltedGuyDIY 3 жыл бұрын

Depends on if that's at 40 or 90 psi. Here's what I use and I get by, though it can run low on air if I spray too long at once. amzn.to/3scm3oe

@bretthl1 3 жыл бұрын

@@ThatKiltedGuyDIY So my little pancake compressor is 6 gallons, 2.6 cfm at 90 psi. Too small to spray texture. I used my 30 gallon air receiver connected to the pancake with the receiver regulator set at 35 psi. Textured two bathrooms without issue. Have learned so much watching your videos. I have never done drywall work before (other than making holes) and your videos brought me way up the learning curve.

@ThatKiltedGuyDIY 3 жыл бұрын

Awesome. Glad to hear