Truly appreciate the support brother!!! 🤜🏼🤛🏼🤟🤟👍👍👍👍

I would definitely put that in the “pro’s” category! I Agree sounds good! We made an exhaust for the car a bunch of videos back when we stepped everything up to 3” and I went with an X pipe. I am debating making a section that I can easily swap out so I can switch between X pipe and H pipe. my first GTO had an H and it sounded pretty good, almost sounded deeper 🤔 THANK’S FOR THE SUPPORT 🤟🤟👍👍👍👍

@@bought2build if you can setting up an X pipe closest to the headers while creating a full equal length exhaust will get it to sound just like a corvette if you wanted to go that route!

@@MistaaFrosty that explains why it does sound like a vette when I rev it and what not lol

You definitely had some belt slip for sure! It’s Awesome that the rpm belt got rid of the slip for you! Sadly they don’t make the RPM belt in the size I need so I am stuck with this one for now, I went grip tech pulley and set it up with as much belt wrap as possible so far so good! And yeah f1a94 would be my next move as far as the blower is concerned but they make a cog drive for that so that would probably be the route I would take 🤟🤟🤟👍👍👍

I have an F1a with an air filter and GTO air inlet pipe. Maybe you have an F1A-94? Edit; this comment is for bigbadass

@@baby-sharkgto4902 what engine are you running

Thanks!!! Appreciate the support 🤟🤟🤟

Thanks for the support! 🤟🤟🤟👍👍👍🤟

Thanks for the support 🤟🤟👍👍👍👍

Belt squeaking? The belt doesn’t squeak that is the procharger itself that’s just how they sound especially with straight cut gears and with a cam when the rpm is bouncing around a little, some louder than others depending how fast the blower is spinning at idle 🤟🤟🤟👍👍👍👍👍

Thanks! Glad you liked it! And thank you for the support!!! 🤟🤟🤟🤟🤟👍👍👍👍

Man I’m dealing with the same thing trying to decide. I’m building a truck (AWD) and stuck between a Procharger and 2650. Either you want it off the line ( 2650) or TOP SIDE (Procharger) but idk what I want

So there are many ways to go about it I have a whipple car and a procharger car personally I like the procharger setup better I can always step up to the next size blower and keep everything els the same the power does come in linear but it still throws you back in the seat this setup made just as much tq as it did HP or close to it but having the procharger curve actually helps a lot of times because my whipple car traction isn’t a thing a hooked up procharged car will put 60 foot a spinning whipple or Maggie car any day plus in my opinion the procharger sounds way cooler! Lol Also if budget is on your mind check out torquestorm I have been seeing some cool stuff from them lately If off the line power is your concern you can always pulley down or spray it with a super small shot off the line if needed Also depends if you are going to foot brake or have a trans brake Good luck and thanks for the support 🤟🤟🤟🤟👍👍👍

@@traifields846the in between option you are looking for is like a d1sc series procharger. I put one on my truck and at 3k rpms it makes like 4lbs of boost. Yes its linear but also can blow tires off at highway speeds. Youd think a twin screw would be a little more aggressive lower on but a friend of mine has an almost identical truck with a whipple, similar cams etc and we have very similar dyno graphs. He makes his peak torq a hair earlier but he went down 2 pulley sizes and had to go to e40 to match the same rwhp i was at with the d1sc. Its very streetable, but isnt gonna spin the tires by accident under like 3k rpms. If you run a big stall anyways its a no brainer. On stock stall the twin screw probably feels better

Check out the dyno video I did with it! it will handle some decent power it is all in the tune or tuner that you use! You’ll see in the video made some good power and we will be shooting for a good amount more here soon! 🤟🤟🤟👍👍👍👍👍👍

Not yet anyway lol 🤟🤟🤟🤟

Like you said heat for sure is a big one also just the power curve in general is much different between the 2 I also personally like that with the procharger I can step up the blower size easily just by changing head units I am sure there are more pros and cons between the 2 but the centrifugal blowers sound pretty awesome too!

@@bought2build you have a very sweet GTO. I look forward to watching your other vids. A new Sub from Alabama!!

@@beanapalooza6614 thank you! I appreciate the support! 🤟🤟🤟🤟🤟🤟🤟👍👍👍

I hear ya. in this particular car I don’t but will definitely go turbo on something soon🤟🤟👍👍👍

What you mean?

@@bought2build mpg I want a pro charged cam but it’s gonna be used like every other day

@@Tazerect honestly idk what my mpg’s are it’s not something i really check on the car sorry 🤟🤟🤟🤟🤟

What makes you say that? In your opinion what makes it not a daily? To me car is 100% able to be a daily if you wanted it to be it is on pump gas and just set it up for flex fuel has heat and setup for AC everything works and it drives great I’ve driven it a ton! Only thing holding it back from actual daily driving is the rear tire in this video not great for rain but I have a different set on it at the moment thanks for checking out the video I appreciate it! 🤟🤟🤟🤟👍👍👍👍👍👍