The Bob Ross of DIY guitar.

*Instructions not clear , garage door opens when I play guitar*

You explained this so well I think my soldering skills went up a lot just from watching this. I feel confident to change my pickups with this video as a reference. You sir are a natural teacher!

I sure wish every pickup maker used the same color codes.

Thanks Seymour Duncan. I’m not paying a “guitar tech” $75 and waiting 2 weeks!? How calm and friendly this guy is. Put me at ease and inspired confidence! Why can’t every teacher be this way?

Woah! Good pickups make such a huge difference! I've had a stock Jackson Rhoads for 12 years, and it's as if I was playing with Chewing Gum in my pickups this entire time. I swapped my bridge pickup for a Seymour Duncan Invader, and the clarity in the high end is astounding. Incidentally, I've also been really bad at pinch harmonics for my entire life...until now

I love tutorials where it just shows you the thing you want to do and explains that thing. Thank-you sir!

This is next level explanation here! No assumptions, nothing is considered obvious enough that should be left out. This video comes from a place of empathy and we all could learn from it.

How did I make it to 56 years old, and never had to change my own pickup! Today is the day, thanks for the tips!!

You Sir are the Bob Ross of pickup swapping! Thank you for the great camera work, the clarity of your instructions and most of all, no annoying canned KZfaq quality background music. I'm doing a full resto of a 1963 Guild Starfire 3. Will be putting SD vintage P90s in with all new electronics. Wish me luck. Thanks again for this great video.

Excellent instructions!! Haven't changed a pickup in 25 yrs & was a bit antsy about the process. This video made it easy. Changed the humbucker on my Kramer baretta with ease. Much thx!!!

Heck yeah ! Very helpful. Not every guitar comes from the factory with that perfect tone,or maybe you just want something a little different. Now tone chasing just got alot easier for me. Thanks again.

The Bob Ross of pickup fitting videos. Fantastic!

this guy's voice is so calm and yet so confident and I love it, amazing guide and I feel super confident now to install new pickups!

Deadpool teaches guitar wiring.

Thank you so much for making this tutorial man. Just swapped my stock bridge pickup for a Dimarzio Super Distortion, followed your instructions and advice and it worked out perfectly!

This was exactly what I was looking for single wire to the 5 wires on a one volume two tone guitar. Excellent job, and thank you!

15 minutes ago I knew nothing about pickup wiring. Now I know all I need to do it.

Thanks so much, I've never wired a guitar before and I've been tremendously frustrated trying to find information on how to wire a 4 connector pickup. I don't need to split the coils and and all the advice I've gotten so far has been over my head and lacking depth, but this helps a lot.

I’ve yet to find a video on KZfaq that’s this good. I learned a lot about Seymour Duncan pickups and the process both. Thank you.

I used this to upgrade my Seymour Duncan invader bridge pickup to a humbucker, this was EXTREMELY helpful and I very much appreciate it!

Thank you, I'm planning to change the stock pickups of my brother's Ibanez GIO GAX70 to Seymour Duncan Humbucker pickup. This really helps

I’m new to wiring and this helped me a lot. Nevermind the haters.

That reassuring voice is ideal from a beginner's perspective. Thank you.

I know this is super old now, but man I couldn't have done it without this video... Well I probably could have, but not with the efficiency this helped me do it. I had 0 experiece soldering before doing this on my guitar, so I was a bit nervous to attempt to learn on my instrument. Super straight forward, best tutorial on soldering guitar pickups on this app.

Thanks for the vid. I just replaced the stock humbucker in my 8-string kit build with a Duncan Distortion humbucker and, considering that this was for a Seymour Duncan humbucker, I was able to follow this tutorial to the letter. My 8-string is a Tom Delonge-style setup: single humbucker with just a volume knob so the wiring is fairly simple. The hardest part was soldering the wires where they needed to go since I'm not exactly a wizard with a soldering iron. My solder joints aren't pretty but they got the job done.

This is by far the coolest DIY teacher I have ever seen. Thanks man.

Thank you for the video! Helped a lot changing pickups on my Strat and Bronco bass.

This is rad. I was choosing between a SD or another brand, but this video helped me with my decision. If they are this helpful with a tutorial on how to install, well they earned my business.

I do believe I will be changing my own pickups. I'll be going for Seymour-Duncan, too. Thanks for the walk-through.

Great video, explained everything simply and in detail. I'm going to upgrade my Jackson Cvr2 pickups to Seymour Duncan hs2 and hs5.

Just got a SD Distortion - this is the exact video I needed. Thanks for putting this together :D

Thank you, can't wait to get started!

This is great it combines two of me favourate KZfaq topics, guitars and ASMR, i can fall asleep whilst learning how to fit a new pickup to my Yamaha Pacifica 😁

7 years later and I still come back to watch this for a refresher. Thank you sir

This seems really satisfying to me. Never done it, I'm a drummer but I have an old Ibanez I was thinking about trying to do this on.

Just saved myself a couple of hundred bucks for a pickup change. Awesome work. Bought a soldering kit and got to work

this was the most interesting tutorial i found for changing my pickups, thank you so much!!

Great tutorial! Descriptive, clear, with good narration.

This video helped me wire my first guitar, it was a Jackson js22-7 and pretty much I made a single volume, 1 pickup with a two way mini for coil splitting.

Hi.Its not that hard that i thought.Thank your for your detailed tutorial,it helps alot!!

Great tutorial, I changed my pickups on my guitar thanks to this and it is so much better now. Really thank you for explaining so calm!

Your voice is so soothing and calm, I feel at ease listening to you XD

I did find these instructions helpful, thank you!

Thanks for this excellent instructional video. Well done!

Excellent tutorial, thank you.

Thank you! Very clear video!

Really helpful for newbs like me 😅 and smooooth commentary man! Haha. Cheers!!

I really like your explainations. Nice work.

Incredible tutorial. Kudos to you man.

Very patiently explained! Thank you very much!

Fantastic video, thank you sir!! Im super confident i can successfully change pups now..5 stars!!

i literally don’t even own a guitar but i watched the whole thing. nice tutorial. i’m looking to get my first guitar and thought this video might be helpful if i ever wanted to change pick ups

Getting ready to install my first set of pickups, so this will be helpful.

The instructions were stupid easy. Thank you. Didn't take long at all!

I've only ever once attempted to install a pickup, years ago(probably like 8 years) and failed some how. Either the pickup I bought was faulty, or I fucked something up. In the end, I no longer have that guitar. Jump to today and I FINALLY got my new set of pickups(12 years into playing guitar, sounds like a good time to change things from stock LOL) and because of this video I now know that I have two new single-wire pickups. I'm legit excited to put these babies in and play with them. I remember when I tried to install the first pickup I ever did, I heated the solder up first. Don't think that caused the issue but yeah, clearly not the best way to go about it. lol. Thanks for the video man! :)

I just start to think about customizing my gear. I'm fine with the theory, but a little concerned about the soldering. Your tutorial is really great, both in what you show and say as well as the way you explain it. 👍

Very informative but what genius chose black for the HOT wire? Face Palm! On another point: NEVER cut your strings before loosening them, you'll save your tuners, bridge and finish on the guitar!

awesome instruction! Thanks!

Thanks dude. I just went and swapped my white for my black. We got sound lol. I just put a SD quarter pound in my bridge in my squire classic vibe tele. She roars.

Thank you for sharing your tips ❤❤

Very helpful video .thanks a lot

I referenced this before I opened up my Epiphone to change the pickups. When I did, I found that the Epi pickups has wire terminals with a color coding that is different from the Seymour Duncan wires. The bridge pickup terminal has 2 black wires (one of them the bare wire), and the neck has 2 white wired (one of them also the bare wire). After a lot of searching, I found this - and successfully changed the pickups: From Seymour Duncans to Epiphone harness: bare goes to bare (of course), green goes to black, black goes to red, white goes to green, & red goes to white

Such a good lesson. Thank you.

I haven't done this since I was a teen. And now, my skills are complete. I will construct a new light Saber! Thanx.

Huge thanks!!! You made it really easy

Great Video! Was amazed at the professionalism of the man!

Outstanding video! I'm trying to put an SSV+ into the bridge of a super strat, and have no desire to do coil splitting with it. That said, there's virtually nothing out there, whether it be wiring diagrams or videos showing how to wire up a series bridge humbucker into a strat (that was previously an SSS). So, I'm simply working with two 250K tone pots and a 500K volume pot. I'm probably over-thinking it, but it would be nice to see it done visually. Suhr doesn't have a wiring diagram, and it seems to be opposite of my Bare Knuckle Pickups wiring diagram. So, I'm hoping it's the same wiring as the SD. Either way, I'm going to give this a try and see how it goes. This is a great video...thank you for posting!

Thanks for the video, very helpful 👍😁

This is awesome. I wanna try it if I ever change one myself.

Great video! Thanks

Great video! Very helpful.

You can use a little flux on the existing solder to melt it very quickly instead of setting your iron on the dry solder heating everything up. Probably won’t do anything to a pot, but if it was a sensitive piece of electronics you don’t want to set it on for that long.

Very helpful instruction. Thank you

Thank you for this very informative and easy to follow video. Two questions. 1) I want to install a pair of Seymour Duncan pickups in my Les Paul. On one of the volume pot lugs, Gibson has left quite a lot of solder on the lug, which one of the orange drop capacitors is attached to as well. If I try to heat the new pickup's hot wire to the lug, and am not able to remove the solder, and am only able to connect the hot wire to the remaining solder left by Gibson, and thereby not being able to connect the hot wire DIRECTLY on to the lug, will this lessen the pickup's signal/output? 2) Also, what is the recommended temperature to run the soldering iron at? Thanks in advance.

Thank you for the great tutorial. :)

Excellent tutorial

Thank you so much! Very informative!

this was amazing, thank you!

This was so helpful!

Great video. Thank you

You are the man! Thank you!

Great teacher

nice vid...informative without being condescending...love Seymour Duncan products...

I'd make a diagram of the wire colors attached to what lug on back of each pot from which pickup.put that in a little envelope and toss into a case compartment.

5 seconds in and getting flashbacks to the awful electronics projects I attempted in college.

Thanks for the great video!

Oh my gosh! This was so soothing. I'd listen to this guy explain how to do anything. As someone fighting the battle with depression, etc. this was incredibly therapeutic. 🤣 Heading over to the channel now, praying he's still active.... HE IS! Woo Hoo! 😃 Subbed!

Mr Guitar Talk you should be a professional with your voice. You have the best voice with clear articulation and every word is completely clear. I am leaving you this idea and compliment, as I am a 100 percent service connected vet with very bad severe tinnitus and bi lateral hearing loss that is severe. Hearing is really difficult for me picking out syllables and certain phonix. You Sir have a voice that I am not even using my heariing gear, as the hertz of your voice and how you speak so consitentantly and clearly its amazing. 😊

Love to solder! Do it all the time on my fpv quads. Now I'm off to update my Hamer xt quilt top that has horrible pick ups from the china factory. Thanks!

Great video, thank you!

Alternative "tools and supplies": soldering: big gun type ; wire cutting: scissors ; Wire stripping: teeth (between), front, choppers ; Screwdriver improvise: dime, metal pick ; pliers: finger nails ; tape: fingers ; cell phone: mental notes ; towel: kleenex, or pure air (nothing);

thank you for the informative video!! 😅

Thank you so much for making this video

Weller well done sir!

I waited countless years and paying hundreds of $$$’s to techs before finally deciding to swap my own pickups.And with nothing but this video,was successful. Thank god,because it was on a$2,500 Les Paul....lol. Extremely satisfying to know not only did I finally find i can do it myself,but found just the right sounding pickup.I wish I would’ve decided to do this long ago. Btw-the hardest part was getting the dam springs from shooting from my hand when installing the new pickup.He made it WAY easier then it really was. Thanks

You just helped me install SD Alnico II's in my prs. Thanks!

this is great thx

Thanks a lot for that very interesting Video. My question is, what is the Guitar manufacture of this fine Guitar? Gibson?

Fantastic video