ThankYou for your knowledge and expertise! Great quality video!

Thank you!!! I rewired my Bass to your specs and I got unbelievable

Thank you!

i have a fender player strat and as much as i love that single coil bridge pickup i wanna install a JB SH4 for that green day hot crunch lol aside from cutting the pickguard so it can fit, (i kinda wanna angle it like billie joe does) how would one do that

I ran into another kind of lead wire on Rickenbacker 4003. The lead wire was a 26 gauge (why so very thin and fragile?) wrapped in plastic with a wire mesh braid around that (for shielding I assume), and then braid was wrapped by plastic. The connection was made by cutting the plastic off the wire braid, twisting the braid together and soldering that twist to a pot (or whatever) and then the hot lead to wherever. In changing the pickguard and pickups on two occasions I found that the joint wherever the mesh twist was bent at 90º broke at all places with the manipulation of working on the electronics and replacing that and pickguard back into the guitar. Two wires, ground and hot would be more durable.

is it possible a vintage style single conductor wire...wired onto push/pull pots and how the connections?

Would connecting the white and red apply to stacked single coils as well?

I generally straighten a short length of braid, twist the strands together and tin that, ensuring that it doesn't unravel

I have been looking for the answer this question. I am sure I will find it sooner or later. Each coil has a black and white wirer but I have not heard mentioned which coil has the red or white wire. I realize that it dose not matter. Black & white. Red & Green? If I had to guess. Thanks SD 👍

I don't see 1-conductor pick-ups available in Europe, only 2- and 4- conductor. Is that because the 1-conductor is an older method of connecting components?

Im using shrinktube where I can. only place I need to solder will be back of volume pot for grounds.

results!!!

I'm trying to wire a p90 humbucker p90 configuration guitar with a 3 way switch. I'm trying to make it behave like 2 seperate p-rail pickups but full size. Any suggestions or tips to wire it properly?

So the red & wht wires are connected together then shrink tubed ... Right Thank you

All brands use the same distribution with the 5 wires? I mean if each color always corresponds to the same pin.

Is that color code the same with epiphone lespaul humbuckers.

Thanks bro..Jesus Loves You.

Pick-upazoo

isnt red usually the hot?

Cannot remember how I first installed my Slash zebra pickups, flicked from bridge to neck pick and no sound that’s why I’m watching video.

I’m not that bright with these things.. I bought a pick up from eBay that has a green and a white wire but when I took my broken pick up off guitar it has a red wire,a white wire and a bare wire~ all three encased in a black plastic covering ..

It would be nice if every manufacturer went to the solderless system similar to EMG

say hot lead one mo gin....