Do you need high tech steel for blacksmithing tools?

Рет қаралды 37,228

3 жыл бұрын

The variety of steels available today can be mind boggling. but do you really need high tech steel for blacksmithing tools? lets take a look at making some punches and chisels from very simple steel, 1045
My name is John Switzer, I operate Black Bear Forge, a small one person blacksmith shop located in southern Colorado. My current focus is shifting away from commissions and customer orders and towards education through these videos on KZfaq. Thank you for watching
To provide financial support use one of the two links below.
www.paypal.me/BlackBearForge
Or you may set up a monthly contribution through Patreon
/ blackbearforge
Mailing address:
Black Bear Forge
P.O. Box 4
Beulah, CO 81023
If you are curious about some of my other interests, you may like my second channel
John Switzer
/ @johnswitzer
Find my online at:
www.blackbearforge.com
www.blackbearforge.etsy.com
/ blackbearforge
/ black-bear-forge-20986...
Below you will find useful links that will help you in your journey as a blacksmith.
My blacksmiths apron
www.Forge-Aprons.com use code BBF
RZmask 99.5% dust mask
rzmask.com?afmc=ay
To find more information in blacksmithing in the US or to search for your local ABANA affiliate group visit.
www.abana.org/
Blacksmithing tools and supplies
Self contained air hammers - www.saymakhammers.com/
General blacksmithing supplies - www.oleoacresfarriersupply.com/
General blacksmithing supplies - www.piehtoolco.com/
General blacksmithing supplies - www.centaurforge.com/
General blacksmithing supplies - www.blacksmithsdepot.com/
General blacksmithing supplies - www.blacksmithsupply.com/
Square head bolts and lags - www.blacksmithbolt.com/
New anvils - www.oldworldanvils.com/
New anvils - www.nimbaanvils.com/
New anvils -
Industrial supplier - www.mcmaster.com
Tong blanks and tools - kensironstore.com/
Fire brick and refractory - refwest.com
Most of my videos are shot on the Canon M50
adorama.evyy.net/NEnJV
Audio is recorded using the RodeLink Filmmaker Wireless Microphone Kit
adorama.evyy.net/g5vXA
I have set up a Facebook group just for you, the viewers of this KZfaq channel.
If you would like to share your work that was inspired by my videos
This is the place to do that
/ 101400907400310
Blacksmithing and related activities can be hazardous. These videos are not a substitute for competent professional instruction. Your safety is your sole responsibility. Always use appropriate safety equipment including eye and ear protection when working in the shop. Follow manufactures safety guidelines for the use of all equipment. In the event something shown in one of these videos seems unsafe, it is up to you to make the appropriate changes to protect yourself.

Пікірлер: 151

@Edwinthemountainman8454 3 жыл бұрын

Hi iam Edwin de vries from The netherlands I just startet forging i realy have a good help on you video’s thanks for that 👍👍👍🤠🤠👏👏

@BlackBearForge 3 жыл бұрын

Glad to help

@Edwinthemountainman8454 3 жыл бұрын

Black Bear Forge thanks for The help:)

@jackshadow325 3 жыл бұрын

If you live in a country where you don't have access to different steels -- truck axles make good hammers, car axles make good small hammers, chisels and punches, and spring steel makes for good punches. Leaf spring for knives. Quench in oil first and if that doesn't work, use water. Temper to personal preference.

@SpeargrassForge 3 жыл бұрын

Another good point for the flats, not only for indexing, is when you lay them on the anvil/ place them down, they are less likely to roll away. Its terrible having to chase runaway tools

@bernard7472 3 жыл бұрын

I am a small French blacksmith I watch all your videos I do not understand English perfectly but I just found that we can subtitle in French. So I’m going to take back all the videos to better understand. In any case a big thank you for your availability, the quality and diversity of your demonstrations and explanations.

@grandpas6062 3 жыл бұрын

Salut Bernard, si tu veux des éclaircissements, passe à l'atelier. Je pense que je pourrais t'expliquer. Pascal

@OuroborosArmory 3 жыл бұрын

I never noticed the sound hot steel makes until I watch your videos... your anvil has such a lack of ring it’s kinda neat to hear the difference of what the steel sounds like.

@douglasyoung927 4 ай бұрын

Can't believe I've never stamped the steel types into tools! I frequently make 1 or 2 versions of a tool from agricultural steel (something along the lines of 1035 or 1040) and work out all the bugs in the tool and the process before I make the final version out of better tool steel. It would be really nice to not get them mixed up anymore!

@picklesnoutpenobscott3165 3 жыл бұрын

Thank you for looking after us Newbies. I don't have a blacksmith school I can go to, especially now. The internet has become my college.

@solfindus 3 жыл бұрын

Your videos Are Truly a joy to watch, you are definitely one of the best blacksmithing channels out there. Thank you John

@BlackBearForge 3 жыл бұрын

Wow, thanks!

@dgtlmoon 3 жыл бұрын

A note on hardening - it is also the speed at which the material moves from the critical temperature to below the "hardening" temperature, if you take too long to quench, it wont really harden! most tool steels are about 2 seconds max

@3870TheDad 3 жыл бұрын

John, so glad to see you get back to what I see as your greatest strength, teaching the basics of blacksmithing, and making it entertaining!

@BlackBearForge 3 жыл бұрын

The problem with basics is it all starts to seem the same

@Bangalangs 2 жыл бұрын

Sometimes going back to basics and teaching them to others gives you a better understanding of your own learning, and might reveal new aspects you never considered before.

@ColdHawk 3 жыл бұрын

This video makes my hands itch! I haven’t fired up my little propane forge since the COVID lockdown started. My five-year-old is unbelievably curious and has a habit of getting into your blind spot whenever you turn, just so he can get behind you and pick up whatever you just put down. When he was regularly at school, out w/ my wife on weekends, or visiting friends it was great to go out back and practice working some hot metal. But now we are all here 24/7. After all the times I have glanced up to find him holding something sharp/heavy/hot/toxic/otherwise dangerous, I can’t bring myself to risk it while he is around. I miss it, and I don’t think I have ever found any hobby that captured my mind quite so much. Thanks for your videos as always!

@airgunsandsuch9139 3 жыл бұрын

He'll never know what a burn is like untill it happens. Better you're there when it happens than not.

@criswilson1140 3 жыл бұрын

As a young child, maybe 4 or 5, I picked up a black heat piece of metal. I got a nice painful burn out of it that healed within a few days and learned a very valuable life lesson. He will do the same, all boys do.

@Alex-ow6hk 3 жыл бұрын

Hahaha I got 2 tonnes of untouched 1060 steel from the local train yard that shut down a year ago, Best 200$ I’ve ever spent. the reason I got it so cheap was because the council didn’t want to pay someone to remove all the material, so I did some 20 trailer trips and coughed up $200. Now I’m good for many years ahead of me lol

@BlackBearForge 3 жыл бұрын

Thats a great find. Hopeful in useful sizes

@gurvinderkau1e5w18 3 жыл бұрын

I have seen many blacksmith use punches and chisels made from rebar, most unpredictable steel.But very easily available. They just learn how to deal with it with course of time. 1045 is very good steel to make tools.Great video👍👍👍👍

@michaelpuckett2084 3 жыл бұрын

When i first started i repurposed as many broke tools i could find because the metal i had wasn't up to the task now i buy steel depending on the need its made a tremendous difference

@smaqdaddy Жыл бұрын

I like how your dividers are looking like they're both waving at us with the opposite hands in the background! love your stuff John! Thank you so much for doing what you do! You're our KZfaq Blacksmithing Shop Teacher! ❤️

@Zogg1281 3 жыл бұрын

They would make a good start to a begginer level blacksmith. When I started I could never find steel at a low enough price to be able to make the tools I needed so I had to make some from coil springs. The only time that I did find some steel that was advertised as good for punches, etc., my local blacksmith told me to send it back as it was only marginally harder then mild steel. So many types of steel out there and it makes it very difficult if you don't know what to buy. This video should help a lot of people 👍👍

@wedo4fun251 3 жыл бұрын

Another great video. Love watching them. Very inspirational. Just noticed one thing. From around 8:50 onwards, the mark on your leather apron (with that nice anvil logo), just around the belt level, on left. I guess that has got a story, and a good proof why to wear one..

@dthomas021 3 жыл бұрын

What was that at 5:19? "Whoops"? Made my day, sir. The number of times I've said that (or worse) to myself. LOL Thank you for leaving that in.

@les959 3 жыл бұрын

hi, thankyou for your videos. i have a full workshop and forge that i got from my late father and i use your videos to learn. thank again. les

@johnjude2685 3 жыл бұрын

Thanks and I have been using the"junkyard steel" Agree I had many times fill learning would be best to use known steel Thanks and making notes

@stanervin6108 3 жыл бұрын

@18:10 . Wax Temp sticks take the guesswork out of the heat treatment equation. Was lucky enough to obtain an assortment package of 20 at a flea market for less than twenty bucks. Range from 500°f to 1800°f in 50°f increments mostly. Seems like a few of the lower temp sticks were missing, iirc.

@hughlink7341 3 жыл бұрын

I watch you videos the most, I learn so much from you

@americanpatriot2979 3 жыл бұрын

Thanks John, Glad I seen this video. I'd like to learn more about different types of steel for tool making.

@bearshield7138 3 жыл бұрын

thank you

@jdmcburney 3 жыл бұрын

I needed this video!!! Thanks!

@olddawgdreaming5715 3 жыл бұрын

Thanks for sharing with us John, lots of great information in your videos.👍👍👏🏻👏🏻👏🏻👏🏻👏🏻👏🏻

@adelheidsnel5171 3 жыл бұрын

Thanks for the heat treat app. Just what I was looking for🙏

@PaulFontaniniArtist 3 жыл бұрын

Well done mate. I agree but not 109%. I use lots of coil spring and torsion bar for tooling.

@adampablodayc 3 жыл бұрын

Thanks John,it's always a pleasure to watch your videos.

@grandadz_forge 3 жыл бұрын

Love this style of tool ever since I saw Asperry do the index flats. Good video boss

@danmilburn6597 3 жыл бұрын

Your video quality is excellent. It makes your videos very enjoyable to watch, thanks.

@BlackBearForge 3 жыл бұрын

Thank you very much!

@marcerivest6204 3 жыл бұрын

Great video John, as a tool maker for 40 years ,l heat treated a lot of stuff in a electric oven and with the torch. A lot of it was 4140 and o1 tool steel which are both oil hardened.

@glencrandall7051 3 жыл бұрын

Nice tools. Great tutorial. Thank You for sharing. Have a great day and stay healthy.

@stanervin6108 3 жыл бұрын

Excellent pointers, John. 🐾🔥⚒👍🏻

@Carterironworks 3 жыл бұрын

Excellent job sir, always love these videos on tool making

@patrickhance7211 3 жыл бұрын

Nicely done john.⚒️🔥⚒️

@kylejones9089 3 жыл бұрын

I love these kinds of videos that you put out. It gets me excited to start making things. These kinds of videos makes it not so daunting to know exactly what kind of Steel to use when you're just starting out . Thank you.

@Redneckemtb 3 жыл бұрын

That pan from the back of the forge to the anvil was a pretty cool shot.

@BlackBearForge 3 жыл бұрын

Thanks

@MasterKOVAL 3 жыл бұрын

Very high quality photography and interesting content. Detailed story, thanks -) I subscribed to your channel - I have something to strive for and is learning in my work!

@kansasprairieforge2918 3 жыл бұрын

Yamez at Island Metal was making some hammers last night. Didn't quite catch what he was using John. But he said it was a real simple steel and was A water quench steel. His comment was that it was a super easy steel to get the heat treat right on. That it moved like mild steel when it got hot, under the hammer.

@BlackBearForge 3 жыл бұрын

Very likely 1045

@candlerpainting 3 жыл бұрын

nice video...you hammer like a machine...relaxing to watch

@NeilGraham.I.M.F 3 жыл бұрын

Great topic for a video. I enjoy working with 1045. And any further info you can get on any given topic is relative information. Thanks again john

@douglasfathers4848 3 жыл бұрын

Grate video John ,These are the type of videos you are famous fore. Best Teacher on You Tube so thanks John really Appreciate you. cheers, :)

@ajwhittlebang6977 3 жыл бұрын

Love the rhythm of the inward breath before a flurry of well controlled hammer blows count 6 or 9 or 12 as the breath is released slowly. Geepers I sound like a Yogi. This is a very soothing aspect of smithing both to watch and engage in. Then there are the more crisp planishing blows at ever so slighlty off that optimal forging temp still in the rhythm of that particular smith. Cheers to you John..

@paulorchard7960 3 жыл бұрын

Solid advice John, I am a scrap steel guy, use lots of coil springs, crow bars, jackhammer bits etc. You know the drum, recently got 2 idler wheels from the track drive off a bulldozer, no idea of the composition but they are bloody hard, will become tools eventually! Known steels I am yet to work with, have some successes with the crap I use and a few failures but I put down to learning and experience, a lesson learned is worth the time! My local engineering shop is a great help, I buy simple steel from them almost weekly and have picked through their scrap bin just as often! Getting some 4140 from them soon as they have a big order lost in the Carona world and are awaiting delivery. Hope to have success with a hammer, time will tell!

@paulorchard7960 3 жыл бұрын

Ulfhedinn Tyr Yeh, the ones I have are , not sure if all are , older ones may be round shaft.

@tofanedward9049 3 жыл бұрын

@Ulfhedinn Tyr some are hexagonal some are round

@barrybarkley1316 3 жыл бұрын

i love your videos John! very informative, but one thing I love the most, is you're not chasing your anvil all over the place like some other videos, and you do a lot of hand forging.

@atomicwinter31 3 жыл бұрын

I've only ever used scrap steel, like medium carbon, 1018 stuff.

@thewirerabbit 3 жыл бұрын

Great video. Looking forward to the v-bit tong video. I'm going to make me a modified set with some sucker rod I found. I'll be following your method. First I have to make a set of round bit tongs to hold the rod! Keep up the good work.

@shortfuse43 3 жыл бұрын

Be patient working the sucker rod...it can be harder to forge by hand than you might be accustomed to. It makes great tools, BTW! A well known smith in our blacksmith club makes his tongs exclusively from sucker rod.

@frankgaletzka8477 3 жыл бұрын

Hello John You are a good teacher Always Think whst is good for beginners and for people who dont have all the tooling of a professionell Thanks for that All best wishes stay safe Yours Frank

@bubbadog5933 3 жыл бұрын

Good day sir ,I guess i'm first to see you today . I hope your day goes well .

@BlackBearForge 3 жыл бұрын

Morning!

@stanervin6108 3 жыл бұрын

🏆

@cowboyrob2887 3 жыл бұрын

Hello - found you from Tik Tok. Really interesting and fun to learn. Thanks

@whilomforge3402 3 жыл бұрын

1045 is the only steel I use for tools. I’ve got a center punch, chisel and round punch that I made when I first started smithing 8 years ago. I still use them and they work just as good as the day I made them. 1045 is a perfectly usable steel for almost anything a hobby smith needs.

@BlackBearForge 3 жыл бұрын

I have heard conflicting things on tempering. What temperature do you generally temper the 1045?

@whilomforge3402 3 жыл бұрын

Black Bear Forge it depends on the tool, and how I plan on using it to be honest. Center punches I will temper for two hours at 375 (or at least that’s the temperature I set my toaster oven to 😂). Hot cut chisels I just harden the cutting edge and leave the struck end soft. Punches I tend to harden and just temper the struck end to a dark straw color. Hammer eye drifts I will harden the struck end only and temper back to dark straw or purple. I know that’s kind of a convoluted answer, but I don’t have one set temperature that seems to works across the board. I’ve actually made some chef knives from 1045, just as a proof of concept, leaving them hardened and not tempered, they actually perform quite well.

@larrystrayer8336 3 жыл бұрын

Yes known steel is good. But I use salvage 7/8 inch sucker rod which is similar to shaft. A couple years ago an petro engineer gave me a spec sheet. Smaller rod 5/8-3/4 are around.25 carbon 7/8 around.45 C. 1.250 are .9-1 C. I have a large stockpile from the same well. 30 ft for $10.00 ain’t bad. So after playing with it I treat it like 1045. Only difference is before I use it for tools etc I anneal it first, heat it and light pounding then normalize it a couple times. Because I only use my horde I feel I have a known. I so enjoy your channel. Thanks.

@stanervin6108 3 жыл бұрын

I agree. The larger sucker rod is good for about 90% of the tooling I make. Another good salvaged material is forklift forks. Great for hammers or mini swage blocks.

@aidenonfire 3 жыл бұрын

You remind me of a blacksmith Ron Swanson 😁 great video!

@robertcarlsondvm7273 3 жыл бұрын

Great Video! Video and audio quality seemed superior! New equipment or technique?

@BlackBearForge 3 жыл бұрын

Not new, but a bit different due to an issue with my usual system halfway through the video

@btsm1973 3 жыл бұрын

John you could just mark them with a paint pen.

@pukinpaja1974 3 жыл бұрын

Thanks to video! 🎅🏻👍🏻🇫🇮🇫🇮🇫🇮

@brianseibert946 3 жыл бұрын

i enjoy watching your videos.. very clear and understanding.. so I'm a beginner... what is a good coal to use.. I used some and i had a hard time to weld metal together.. thanks..

@BlackBearForge 3 жыл бұрын

Buy high quality metallurgical coal. Generally sold as blacksmithing coal by blacksmithing suppliers.

@franciscole482 3 жыл бұрын

1045 is used by the better tong Maker. A point I tell my students by the time you heat a piece of junkyard steel and straight it you could have bought a piece of S-7 or H-13 for the same amount of money

@demastust.2277 3 жыл бұрын

Hey, John. This was a great video. I really liked how the fuller turned out. Quick question, which video did you post that showed how you remove galvanized coatings from random tid bits?

@BlackBearForge 3 жыл бұрын

kzfaq.info/get/bejne/nthonbiQkrC7eJc.html

@demastust.2277 3 жыл бұрын

@@BlackBearForge Thank you! I didn't know what was the acid you used.

@BrianDaleNeeley 3 жыл бұрын

John, you could forge the tools in any manner you want, and rearrange the order in post (post-production, ie: editing). That happens all the time in the movies. There are even entire websites devoted to finding those little foibles ("The odometer is all over the place in such-and-such movie!"). It's also possible you could have already done that here (it looked like you were going back to the forge for the next piece at one point), but if you did, there is very little evidence of it. Anyway, another great video, and I look forward to seeing whether or not I guessed correctly on what you are planning to make with these tools.

@BlackBearForge 3 жыл бұрын

Its way easier to film in the order you want to present than it is to try and rearrange afterwords.

@bobvines00 3 жыл бұрын

John, there's also an app called "Heat Treatment Info" that gives tempering temps for different hardnesses, at least for the materials in their database. It looks like they need users to submit information on different alloys, they check the data, and upload it to the app. I think.... If their info is correct & I interpolated correctly, your 450°F tempering of 1045 gave you a hardness of ~58 HRC on the working ends. Of course, it's quite hard to control temperatures & times without the fancy heat treating equipment that industry uses, but I suspect your new tools are somewhere in that hardness neighborhood!

@BlackBearForge 3 жыл бұрын

I can't locate that app. Do you know who makes it

@bobvines00 3 жыл бұрын

@@BlackBearForge On Google Play, it's called "Heat Treatment Info" by "Holen" and is under "Books & Reference."

@markc1234golf 3 жыл бұрын

making a lot of tools with salvaged 1/2" vehicle coil springs at the moment.... not sure how to harden them though......! They are tough to hammer.

@BlackBearForge 3 жыл бұрын

kzfaq.info/get/bejne/qNF1ostir5eYY58.html

@johnjude2685 3 жыл бұрын

Sir where can I get a list of steel and the use of the steel? I have a very very sharp old wood working chisle that is a joy because it bites into the wood and cuts better than the other chisels that I can afford , Would love to make a great set. Thanks for the Teaching you have already given me Sir

@josephsmith1210 2 жыл бұрын

Thanks John for the thought of staying with one type of steel when starting out. What is the diameter of the 1045 round bar you are using in this video? Joe from Wisconsin.

@josephsmith1210 2 жыл бұрын

John, found the size way down in the comments, 3/4”. Thanks for sharing your knowledge and whits. Joe

@jmullens90 2 жыл бұрын

What is a good book to get for learning about the different steel types?

@Lucas-nf7uj 3 жыл бұрын

Could we get a video on what oils to quench in depending on what steel being using? I feel like that's a lot to ask but it's just an idea :) Great video as usual

@BlackBearForge 3 жыл бұрын

I use a commercial quenching oil (brand unknown) for oil quenching steels.

@jockstewart8793 3 жыл бұрын

1045 is roughly equivalent to EN8 in the UK (only posting this because I am refining my purchases)

@paullambert965 3 жыл бұрын

Great video, John. I read in a number of places that 1045 shouldn't be tempered below 750deg because of likelihood of stress cracking if done at a lower temp. Is this only a problem in larger cross sections?

@BlackBearForge 3 жыл бұрын

Interesting, I hadn't seen that

@markmoreno7295 3 жыл бұрын

Do another on 4140, and which tools would you preferentially make with it, please.

@BlackBearForge 3 жыл бұрын

I have done several videos on tools from 4140

@markmoreno7295 3 жыл бұрын

@@BlackBearForge thanks, I will hunt. I have such a short memory I might have even seen them.

@doughenning4899 3 жыл бұрын

I noticed you have a wheelwright traveller on your wall. Where might I get one? 👍👍👍

@BlackBearForge 3 жыл бұрын

That one is an antique. One of hese days I'll see about making one

@andrewjaye2981 3 жыл бұрын

You should consider starting an apprenticeship. I know you really have your hands full with both channels, but I do wish there could be a resurgence of just such a tradition in our country. Trouble is the typical economic model no longer supports it. We use to convey so much skill, craftmanship and work ethic from generation to generation. Look forward to the v bit tongs. Thanks!

@BartzabelAlgol 3 жыл бұрын

Edwin did you craft your hammer?, curious thank you.

@BlackBearForge 3 жыл бұрын

No, it was made by another smith

@brysonalden5414 3 жыл бұрын

I suddenly realize that making hot cut chisels out of a water-quenching steel like 1045 may well have a significant advantage over the ones I just made out of 4140, because you can cool them down during use with water. Any thoughts on cooling 4140 or other oil-quenched steels in water during use? Thanks, as always, for your continuing contribution to the craft.

@BlackBearForge 3 жыл бұрын

I actually cool any of my tools in water as long as they aren't red or hotter.

@brysonalden5414 3 жыл бұрын

@@BlackBearForge Thank you, that's reassuring! Hate to crack the chisel I worked so hard on.

@DomBlacksmith Жыл бұрын

I'd be interested in knowing how these tools held up after more than a year and a half. Either as a follow-up video or as a quick comment her if you have the time.

@BlackBearForge Жыл бұрын

SO far they hold fine. They do require closer attention to keeping them cool and they need to be dressed more often, but hats all to be expected in a simple steel.

@DomBlacksmith Жыл бұрын

@@BlackBearForge I'm also making my tools from 1045 as it is cheap, easy to forge and I do believe that all those amazing renaissance blacksmiths would have died for a steel of this quality. Yes there are "better" steels nowadays, but that does not mean that the simpler steels are bad. The modern "magic" steels are also quite more complex to get the correct heat treatment to benefit from all their wonderful properties.

@allenclark4826 Жыл бұрын

Hey my name is Allen Clark , I have watched a lot of your videos and was worrying how the 4 tools held up. Because you said you used 1045 to make them.

@BlackBearForge Жыл бұрын

They are holding up well enough to be useable tools. But they do require more attention to keeping them cool than something like S7, H13 or Atlantic 33.

@pkerep1 3 жыл бұрын

Greetings from Croatia !!!!! What type of steel should I use to make blacksmithing tongs ?????

@BlackBearForge 3 жыл бұрын

mild steel is fine for tongs

@nofunclub 3 жыл бұрын

Did you mention woodash for annealing?

@nofunclub 3 жыл бұрын

Yes you did

@wildernessworthy 3 жыл бұрын

How do you get your anvil so quiet? Do you have a video in that?

@BlackBearForge 3 жыл бұрын

kzfaq.info/get/bejne/kJljaZinq668mKs.html

@ReconJeep77 3 жыл бұрын

I sent you a msg on your FB page! Thanks

@johnjude2685 3 жыл бұрын

Is there a app that show color for temperature of steel or paper chart

@BlackBearForge 3 жыл бұрын

I haven't seen one.

@dthomas021 3 жыл бұрын

There are a few out there but all suffer from the same issue. Ink fades and not all screens show color the same way. www.google.com/search?q=steel+color+chart&oq=steel+color&aqs=chrome.1.69i57j0l7.4390j1j7&sourceid=chrome&ie=UTF-8

@criswilson1140 3 жыл бұрын

The color charts are really just a rough estimate due to color distortion. I use a cheap ($15 USD) non contact digital thermometer if I need to get the temperature accurate and it is a good tool to learn the colors with.

@pepehr8139 3 жыл бұрын

Maestro buenas podría hacer su video con subtitulado con español...☺️☺️😁.. Así los q no saben inglés puedan ver al menos leer 😁😁

@dthomas021 3 жыл бұрын

Pepe HR Los subtítulos en español son posibles. Presione el engranaje de configuración en la parte inferior derecha de la pantalla de KZfaq y seleccione Traducir automáticamente y luego el idioma de su elección. Luego presione el ícono de subtítulos (a la izquierda del engranaje de configuración) y active los subtítulos. Nota: Espero que el traductor de inglés a español que estoy usando sea legible.

@Brian-bn3qp 3 жыл бұрын

What is the diameter of the stock you bought? and is that the diameter you prefer for your punches and chisels?

@BlackBearForge 3 жыл бұрын

This is 3/4. But it depends on the tool your making

@Brian-bn3qp 3 жыл бұрын

@@BlackBearForge thank you

@donrobinson1856 3 жыл бұрын

i think the nut on your grinding wheel is missing .

@MinionsSmithy 3 жыл бұрын

What diameter was this bar you used?

@BlackBearForge 3 жыл бұрын

3/4"

@MinionsSmithy 3 жыл бұрын

@@BlackBearForge , thanks, John! As always, great video!

@rangerknow940 3 жыл бұрын

High tech steels been around for thousands of years. The Japanese were using Molybdenum in their high carbon swords and Europeans were using Nickel alloyed carbon steel.

@MinionsSmithy 3 жыл бұрын

Hey, John! Is anyone else having trouble with your patreon account. I am already signed up with you on Patreon, but it is not letting me view the preview videos now. It says I have to sign up, but I already am....

@BlackBearForge 3 жыл бұрын

That seems odd. I'll see if i can figure it out

@BlackBearForge 3 жыл бұрын

Everything looks correct. You may need to contact Patreon. I don't have the ability to check whats on their side

@MinionsSmithy 3 жыл бұрын

@@BlackBearForge and I thank you, kind sir! Maybe its just a glitch. I got the email letting me know the video preview was up on Patreon, but the link said it was locked for members only, lol.

@MinionsSmithy 3 жыл бұрын

@@BlackBearForge will do, Sir. I will wait until the next one and see if it corrects itself. 👍⚒💪

@chrisheinenoutdoors8880 3 жыл бұрын

I just bought a portable hand crank operated coal forge...videos I've found seem to put it from the 1880s...anyway the guy told me I may need to line it with clay to prevent it from cracking. Would you have any advice if it needs to be? It looks like it never has had anything in it before...

@aslob9321 3 жыл бұрын

Chris Heinen Outdoors Look for foundry clay or fire clay, these should work.

@chrisheinenoutdoors8880 3 жыл бұрын

@@aslob9321 thanks!

@baddogforge5181 3 жыл бұрын

How did u burn ur apron ?

@BlackBearForge 3 жыл бұрын

Just leaned in too close to something hot

@dpeter6396 3 жыл бұрын

Man, I guess you use that file for only that purpose! One swipe and the files ruined...

@BlackBearForge 3 жыл бұрын

I'm not sure which file you're referring to

@dpeter6396 3 жыл бұрын

@@BlackBearForge The square file you use to test hardness. I use just the corner of a file right up at the last teeth near the tang to pick at the part I'm testing. That way the file isn't damaged for regular use. I really like your practical approach to tool making.

@dannywieland6877 2 жыл бұрын

just to grind some salt in the wound of Inch users, why do you use numbers like 36inches/9inches so much, why not easier numbers like 35 or 10?? Well turns out you are already adapting a little bit, 36 inches is what gets closest to 1METER and 9inches 25Centimeters..... just give in and go metric like the rest of the planet.