Do you need to use a TORQUE SCREWDRIVER when wiring consumer units?

No video

Do you need to use a TORQUE SCREWDRIVER when wiring consumer units?

Рет қаралды 11,328

3 жыл бұрын

Do you use a torque screwdriver when installing a consumer unit? In this video, Joe Robinson explores the topic with reference to BS7671 wiring regulations and manufacturers installation instructions.
== FREE CPD LEARNING MODULE ====
Circuit protection in association with Schneider Electric
www.efixx.co.u...
================================
== AD===========================
Scheider Easy 9 Consumer Unit review -
• 📐TIGHT FIT? - NEW SCHN...
================================
======================================
ELECTRICIANS' - GOT Questions? we've got answers
If you've got a question or topic you'd like us to explore - drop us a comment in the video or if "asking for a friend" - contact us here 👉 www.efixx.co.u...
MORE ELECTRICIANS QUESTIONS HERE 👉 www.efixx.co.u...
================================
📍SUBSCRIBE TO THE CHANNEL eFIXX helps electricians, electrical contractors, building services engineers, and electrical apprentices. Watching our videos, you'll discover new products, explore new applications and find answers to your technical questions. So if you've been on the tools for years or just starting your electrical journey, we'll help you stay up to date with the latest regulations and developments in the electrical industry.
hub.efixx.co.uk...
================================
📺 NEW TO THE EFIXX CHANNEL Watch our essential videos playlist hub.efixx.co.uk...
📺 CATCH UP ON THE LATEST VIDEOS
hub.efixx.co.uk...
📺 ELECTRICIANS' TOOL REVIEW
hub.efixx.co.uk...
================================
🔴 eFIXX LIVE Join us for our youtube live stream twice a month - features product sneak peeks, challenges, giveaways and live electrical banter. NEXT STREAM HERE
👉hub.efixx.co.uk...
Catch up on previous episodes
👉hub.efixx.co.uk...
================================
🆕 FREE CPD Learn about new applications, regulations and best practice with our FREE CPD modules. - New modules released every month covering everything from surge protection to lighting hub.efixx.co.uk...
================================
📝 APPRENTICE HUB If you're an electrical apprentice, retraining as an electrician or looking to refresh your knowledge, then please check out our apprentice hub. It contains thousands of multiple-choice questions to help prepare for electrical installation exams. hub.efixx.co.uk...
================================
📩 eFIXX NEWSLETTER Sign up to find out about our live events, competitions and product giveaways.
www.efixx.co.u...
================================
FOLLOW US on your favourite social networks for behind the scenes action, breaking news and competitions.
🟠 INSTAGRAM hub.efixx.co.uk...
🔵 LINKEDIN hub.efixx.co.uk...
🟣 FACEBOOK hub.efixx.co.uk...
🟡TWITTER hub.efixx.co.uk...
==================================
❌ This content on this channel is for electrical professionals.❌ ==================================
📹 Presented by
Joe Robinson - Technical Editor eFIXX
===================================
#efixx #electricians #circuitprotection

Пікірлер: 134

@lmuk17 3 жыл бұрын

I use mine on every board, I love it! Gives you that piece of mind and made me realise how much energy I was wasting over tightening connections 😬

@elguapo1507 3 жыл бұрын

As a licensed avionics engineer, I watch your videos with interest. In the aviation industry, where a torque loading is specified, it has always been a requirement that the torque wrench or screwdriver is within the calibration date AND checked for the specified torque loading using an Acratork rig (or equivalent) when securing the fastener. It makes sense for hard materials but when securing malleable materials, such as bare conductors, the torque figure might be "within specified limits" right up until the point where the material has all of its properties damaged to a critically dangerous point. It would be good to see if conductors are materially damaged from the lowest to highest specified torque loading figures specified.

@tommymack3210 3 жыл бұрын

This! Many people use a torque screwdriver that can vary in torque. But they never get it calibrated, like the tool manual says.

@scottsparky1 3 жыл бұрын

My Torque setting for boards is no6 on my 12v hilti drill driver

@waynio67 3 жыл бұрын

Everybody knows it’s 3 dugga dugga’s for incoming and 2 dugga dugga’s for mcb’s 😉😂

@efixx 3 жыл бұрын

🤦‍♂️😂

@Romeworld95 3 жыл бұрын

Unbelievable 😂

@finnl1525 3 жыл бұрын

😂😂

@stephencoulthard1718 3 жыл бұрын

Then you can always go with FT if need to be sure ;)

@blobstrom 3 жыл бұрын

I think you'll find that's for wheel nuts. 2 dugga's for Alloys and 3 for steel wheels

@TimmyBoja 2 жыл бұрын

I have 2. I love them. I like the noise they make. I just wish we could keep to SL/PZ2 all the time for electrical connections.

@MroAeon 3 жыл бұрын

I have it for servicing inspections. Super happy with it for most applications, wish their was Allen bits.

@cj-rb8fz 3 жыл бұрын

If it’s a whia one you can get Allen blades that fit in , got one for the earth pme terminal

@MroAeon 3 жыл бұрын

@@cj-rb8fz thanks I'll look into. It is a whia

@posei3960 3 жыл бұрын

The problem is that some folk think "oh the driver has clicked, its torqued up". NO it fecking isn't! Give it a pull, 9/10 it will be loose. Torque it, leave it, tug it and repeat. Strands flatten out and become loose. Better option is to flatten strands out before putting in terminal. But what do I know, see present wife for further details

@efixx 3 жыл бұрын

Good advice!

@rn5666 3 жыл бұрын

I’m suprised to see that there isn’t already torque settings for sockets and switches, however I’ve just seen the new screwless sockets which could be the future. Exciting

@efixx 3 жыл бұрын

It'll be interesting to see if manufacturers will require accessories to be done up to specific torque values. I suspect it will happen in time. We'll see!

@alunroberts1439 3 жыл бұрын

With all the push fittings and wago connectors will you not soon see screwdrivers and torque drivers becoming redundant.

@raychambers3646 3 жыл бұрын

PS the only problem I had with loose connections was down to a fault in the d/b construction.

@Alan_AB 2 жыл бұрын

Should we also use a torque screwdriver on terminals in all socket and lighting final circuits? Or can we use the "manufacturers instructions" clause to omit this?

@danvictor3934 3 жыл бұрын

What about older consumer units mcbs, rccbs and rcbos and obsolete out of business brands with no toque settings what to do?

@guffermeister 3 жыл бұрын

3 duggas should be fine

@paultipton743 3 жыл бұрын

I've managed to snap the end off a torque screwdriver blade tightening a crabtree Rcbo live/line terminal as I used one of the thinner blades because of the insulation stopping the end reaching the terminal screw as they are further in. Luckily local wholesalers just swapped it for a new blade

@cj-rb8fz 3 жыл бұрын

Brought one of the wiha torque drivers as had the rest of the kit , use it every time on boards , come across no end of boards where it’s been over tightened and twisted the terminal out of place (prob by impact or battery driver )

@efixx 3 жыл бұрын

Really good to know! 👍

@iScoTT29 3 жыл бұрын

My biggest issue is I have a Draper brand torque screwdriver. I am working in a 630A 3 Phase Main cubical with Eaton MCCB's of various sizes which terminal is a Hexagonal screw to tighten the connections. Draper torque screwdriver set does not include a hexagonal attachment and having contacted Draper, they do not do a hexagonal attachment and gave me no solution to get the right torque setting. Do I really need to go out and buy another torque driver well over £100 or do I use my experience and tighten them by hand? This is the real world and manufacturers dont give a damn it seems.

@Sparkair1 3 жыл бұрын

To be fair, a torque screwdriver likely won't give you enough torque to tighten up an MCCB to manufacturers specifications. Most screwdrivers will give you 5nm tops and an MCCB will often be above that. You'd probably be better investing in a torque wrench if you do a lot of industrial work. Then you can buy any sort of generic attachment with a 1/2" drive to suit the breaker you're working on.

@seanthespark 3 жыл бұрын

So realistically, if we don't use a torque screwdriver ( yes, I do, checked twice normally) and the manufacturer recommended its use, you should declare this in the departures from BS7671 in any cert you issue?? Or would that be too far?

@aryehelectricalltd7247 3 жыл бұрын

I got 2 from draper and ck and love it

@efixx 3 жыл бұрын

Good to know, cheers!

@h8ryj 3 жыл бұрын

Most blokes only carry these in their tool bags to look pretty 😄🤣. Torque police will be around soon with the regs books 📚

@APSuk2 3 жыл бұрын

I hope we do not get to the point of needing to torque accessories in the future, not because I don't agree with the practice but I hope we see screw less terminals on all accessories in the near future negating the need to torque anything. I have no clue why we have not seen this change happen already in the main stream just as MF junction boxes with their relevant connectors seem to have been adopted by many. Also it has been shown screwed terminals can come come loose over time due to various factors where as many screw less alternatives do not exhibit the same behaviour. I wonder if we will ever see a totally screw less consumer unit in the future?

@efixx 3 жыл бұрын

Tune in tomorrow for some big news 🤫

@APSuk2 3 жыл бұрын

@@efixx Now you are teasing 😄

@dannyboisparky 3 жыл бұрын

I’ve said about screwless accessories for years. It would work on socket outlets well allowing three cables for Spurs from a ring with 2.5-4.0mm cables. The problem I see is certain accessories like a three plate pendant with possibly no room to expand from. I know three plating at the light is kinda being phased out in new builds but still needed for retro fit and personally I like to see a permanent live at light and neutral at switches for smart. Isolators for cookers and showers would be great screwless as we see so many burnt out due to loose connections

@guffermeister 3 жыл бұрын

Connections in a board should be torqued down at the point for where most circuits should experience the highest load, except for those circuits that supply an invididual piece of equipment for example. Not that almost all DIY'ers will care. So should say a cooker plate having a high powered single fixed load, with the power equal at both ends, have torque settings specificed by a manufacturer to prevent under/over tightening etc, as most people fall in the mantra of more torques = more betterer?

@efixx 3 жыл бұрын

You raise an interesting point here, it'll be interesting to see if manufacturers start specifying torque values for accessories other than consumer units etc. We'll see!

@minitom7772 3 жыл бұрын

I use one frequently, a whia one in fact. And just recently I torqued up a neutral bar on a brand new Hager board, (setting set to the exact setting as per MI’s, and it broke the bar in 2. And no, it wasn’t done up past torque to start with just nipped then torqued. Possibly just a faulty bar yes, but still, frustrating

@efixx 3 жыл бұрын

I bet it was. 🤦‍♂️

@cypeman8037 3 жыл бұрын

Isn't it someone creating a tool for a issue that wasn't an issue in the first place?

@robertburrows6612 3 жыл бұрын

There was an issue, it called arcing , because of loose connections , and terminals not be tightened up

@cypeman8037 3 жыл бұрын

@@robertburrows6612 But was it an issue with the tightness of the screw or the screw itself, or was it a terminal block issue, a cable issue, workmanship issue. I find most times I come across a mistake when doing a job it's more often me that's the issue.

@efixx 3 жыл бұрын

Not really, setting terminals to the correct torque has been around for ages in industrial installations, particularly with big MCCBs. It's becoming increasingly important in domestic consumer units now.

@MroAeon 3 жыл бұрын

All commerical and industrial sites have preventive maintenance schedules. And apart of the schedule electrical integrity inspections, with visual checks, torque/tightness checks (should tightened to ~80% of torque rating so you do not fatigue with over tightening) and current draw measurements, voltage imbalances, and maybe dialetric integrity tests. Nothing is set it and forget it.

@ricky302v8 3 жыл бұрын

@@MroAeon No, you set to the torque rating specified, not 80% of it ffs.

@Dog-whisperer7494 3 жыл бұрын

Great video as always Joe. We DO NOT need to use a torque screwdriver, manufacturers instructions are not a legal requirement they are nothing more than a recommendation , do you read the instruction book for every single item you buy like that new TV or the new fridge freezer? No you don’t what about the flat pack TV cabinet who reads the instructions for them no one if it is not a legal requirement or in the regs then we do not have to use them simple.

@efixx 3 жыл бұрын

Nothing in BS 7671 is a legal requirement as it's a non-statutory document but to be compliant with the regs you need to follow manufacturer's instructions which may include the use of a torque screwdriver.

@Dog-whisperer7494 3 жыл бұрын

@@efixx NO WE DON’T. You have just said so yourself MAY include the use of a torque screwdriver not will it comes down to personal choice . And years of experience . But to be honest I have brought my self a torque screwdriver I got the Dapper model and I hate it the tip of the blade broke the first time I used it . will continue I use it yes only because my hands are not as strong these days .

@Faddnn 3 жыл бұрын

Interesting, so we dont need to torque down 240 mm2 AL either according to you? You do that by feel?

@efixx 3 жыл бұрын

Please stop typing at me in caps Sean, it gives the impression you're shouting at me. I'm saying the manufacturer’s instructions may state a torque value. If they do, we have to use a torque screwdriver to comply. We always have a personal choice in life and if you're happy not to comply with the regs that's your choice. But if you want to comply with the regs and the manufacturer states a torque value then a torque screwdriver will be required. This isn't my opinion it's very clear in the regs.

@Dog-whisperer7494 3 жыл бұрын

@@efixx first of all I don’t mean to give you the impression that I am shouting at you please for give me. Secondly I am not saying we shouldn’t use a torque screwdriver I just saying that it is not a legal requirement and that the regulations are not clear on it if it was then it would be a regulation . My doctor said I should stop smoking not that I have to stop smoking , Law is law . Recommendations are not law .

@G1ZQCArtwork 3 жыл бұрын

Common variables, such as wire type (single strand or multi). Quality of wire.? (or the screws themselves). In the 55 or so years I have been tightening screws, so they don't get hot, or damage the wire, I have never used such a device. I would need to check tightness with a normal screwdriver afterwards, so what use would a torque driver be.?

@Faddnn 3 жыл бұрын

So know you're not over tightening it as well? As long as I follow the instructions, I don't need to worry about something failing in my installs.

@efixx 3 жыл бұрын

To set the torque to the correct setting as specified by the manufacturer. 👍

@fje1948 3 жыл бұрын

David, I entirely agree.

@G1ZQCArtwork 3 жыл бұрын

@@efixx Indeed, but, what if the calibration was way out, and you didn't realise.? Do you just blindly carry on and not go back to the previous installation, where the torque settings are now wrong, or do you use years of experience to tighten them properly with a standard driver in the first place.?

@mowcius 3 жыл бұрын

A torque screwdriver doesn't do the work for you. Once you've getting to the point where it's going to release, it feels identical to doing it with a fixed screwdriver. I suppose the concern is new electricians who have zero clue what the required torque feels like and blindly follow what their equipment says without also applying a little common sense. Torque screwdrivers would absolutely not be the first place that happens though!

@seanburr4644 3 жыл бұрын

What are the problems with over torquing? I've seen plenty of issues with under torqued connections over the years but if its done up firm are there any problems?

@efixx 3 жыл бұрын

Damaged conductors, distorted terminals , broken pcb terminals and leaking waterproof seals.

@mfx1 3 жыл бұрын

You could argue that "take account of" doesn't mean the same as "follow to the absolute letter" . Oxford defines it a "consider (something) along with other factors before reaching a decision." and merriam-webster "to give attention or consideration to (something)"

@efixx 3 жыл бұрын

So let's imagine something goes wrong and you have a warranty claim or worse a fire - how does the argument for ignoring the manufacturer's instructions stack up?

@mfx1 3 жыл бұрын

@@efixx Read it again "taking account of" doesn't mean ignoring. If the regulations mean "follow the manufacturers instructions to the letter" then they need to say that but they don't. But also there's the practical aspect of how would anyone ever prove the screws weren't done up to the correct torque and hasn't been interfered with since?

@efixx 3 жыл бұрын

@@mfx1 Instructions say tighten cover screws to 1.7nM to ensure a waterproof seal, in your own judgement, decide not to follow this and over tighten the seal. Three months later product fails due to moisture ingress through the over-tightened seal. Who's liable for the problem? Some instructions are black and white.

@shaqeelquraishi2407 4 ай бұрын

Thanks 😅😊

@cag9284 2 ай бұрын

If that's the case.. then what about sockets? Similar principle...or not?

@shaungrain4912 3 жыл бұрын

ok I'm an old fart but at 56 I was given the chance to retrain and go back to college the main reason for putting this comment on hear is I have seen others using torque screwdrivers on you tube and then just putting them away I've always been told that when you've finished with a torque anything that you release the pressure or set the torque back to 0 this stops the torque driver from going weak and then not giving you the correct settings and yes their mentions at college also I have been told that you are required to use them on your AS2 exam

@efixx 3 жыл бұрын

Interesting points, we'll look into it. 😊

@edc1569 3 жыл бұрын

Do we need torque test stations at distributors so people can check their calibration!?

@efixx 3 жыл бұрын

Some form of calibration is required! 😬

@stevendouglas3860 3 жыл бұрын

Use it . Yes ....( Although Overpriced ) Test it ( pull lightly on . ) Torque it . Test it - ( pull lightly on .) Use your initiative and spidey senses .

@garrygriffithselectricalse843 3 жыл бұрын

Recently bought one, I have found the sl/2 bit rounds the screw before it gets to 2.5 nm am I buying cheap boards 🤔

@tresslerj1985 3 жыл бұрын

You're probably using the wrong bit.

@efixx 3 жыл бұрын

Is that definitely the right size bit?

@garrygriffithselectricalse843 3 жыл бұрын

Sorry SL/PZ 2 bit Wiha 🤷‍♂️

@simonschertler3034 3 жыл бұрын

Here in Germany or Austria I have never heard of normal electricians using torque screwdrivers.

@Dog-whisperer7494 3 жыл бұрын

Exactly it’s a German/ Austrian invention yet they don’t use them there selfs . It’s just an other way for the manufacturers to make even more money the french don’t use them either nor the Americans. It’s all BS

@kittsdiy 3 жыл бұрын

@@Dog-whisperer7494 in Belgium we also don't use it in fuseboards .. never seen someone use it . ( i do own one ) but yes loose screws can cause big problems ...

@simonschertler3034 3 жыл бұрын

@@kittsdiy But I think there is a bigger risk of overtighten it.

@Faddnn 3 жыл бұрын

Was never really used in Norway either, but now it is more frequently used. And it is needed as well, many connections get over tighten and some is to loose.

@cypeman8037 3 жыл бұрын

What language do they torque?

@efixx 3 жыл бұрын

😂👍

@Dog-whisperer7494 3 жыл бұрын

That stuff bulls are full of

@cypeman8037 3 жыл бұрын

@@Dog-whisperer7494 grass?😕

@iknowmyfootball3901 3 жыл бұрын

The question is why would you not use it? Can't stand the ignorance of Some of the older generation ( no offence ). People are too stuck in their ways " I've never had a loose connection in 30 years . It's like doing difficult maths in your head rather than using a calculator a poor analogy I know . This tool reduces the chance of human error people are almost offended by this tool. Best Matt

@mowcius 3 жыл бұрын

They can give a false sense of security. Having your torque screwdriver click and just assuming all is good is worse practice than using a fixed screwdriver and giving it all a good check over to ensure tightness. Ideally you'd probably use both. Fixed driver to get everything to a "it's not loose" torque and allow the conductors to do their initial movement, then go back over and torque everything up to the required spec. I imagine that if all electricians suddenly switched to torque drivers tomorrow there would be more loose connections than there are today.

@dannyboisparky 3 жыл бұрын

Don’t use one and note it as a departure on cert 🤷🏻‍♂️🤣

@paul_my_plumbs_uk 2 жыл бұрын

What causes these to fail at college joe through constant use?

@robertburrows6612 3 жыл бұрын

My two pennies worth, if an accident happens and you end up in court being prosecuted , and you were asked did you torque up the screws in the CU , according to the manufacturer instructions , pulling out you torque screwdriver in court can save your bacon. . It's not worth the risk of not having one

@newlinerealboi3434 3 жыл бұрын

Good point well made

@efixx 3 жыл бұрын

Spot on Robert, spot on.

@Dog-whisperer7494 3 жыл бұрын

Manufacturers instructions are not a legal requirement so you can not be prosecuted for not following the instructions. But yes if you want to protect yourself and your reputation then it’s worth the hassle

@posei3960 3 жыл бұрын

NO Way would I pull my tool out in a Court.....not after the last restraining order anyway

@robertburrows6612 3 жыл бұрын

@@Dog-whisperer7494 yes you can . It would be regarded as negligent if you don't follow manufacturer instructions. There has be many a court case were people have not followed manufacturer instructions and tried to sue. And lost in court , and had to pay all court cost. If you went to trading standing standard or you asked your solicitor the first question would be, did you follow the manufacturer instructions, because the manufacturer would be regarded as the expert not you , because it's there product they designed it they tested it, not you . I suggest you look up the laws on negligence. When you purchase goods the manufacturer instructions form part of the contract on supply of those goods , so I suggest you read consumer ,

@raychambers3646 3 жыл бұрын

Luckily being retired I don't need to buy one !

@efixx 3 жыл бұрын

Ah, c'mon, everyone loves a new tool!

@XX-ww8lh Жыл бұрын

Interesting perspective @efixx. The regs clearly state that it is a mandatory requirement that the manufacturers instructions are to be taken into account. However they fall short of mandating adherence to the instructions which is rather odd and it is a shame that you don't raise this in the video. Further, manufacturers' instructions are generally very vague, poorly written and often do not mandate torque settings; again, a shame you dont raise this. So on that basis it is bit of a stretch to say that use of torque screwdrivers is needed... Whilst it is without doubt good practice to use torque screwdrivers, their use is clearly not mandated as the regs are vague which is also often the case with manufacturers' instructions.

@user-yw6qb9tt7t 2 жыл бұрын

Do electric drill screwdrivers work for this job ?

@Dog-whisperer7494 3 жыл бұрын

I think last nights debate got a little over heated, and I think I may have offended and upset Someone. That was not my intention, there are two people in particular from the eFix team as I don’t know who was responding to the post so I sincerely hope I have not offended or upset them . I have a lot of respect for the guy’s at eFix and GHS so please accept my sincere apologies . Time to draw a line under the subject of the torque screwdriver , so let’s just agree to disagree I feel bad enough without this continuing on . End of story

@efixx 3 жыл бұрын

No worries Sean, we're all good. 👍

@johnburns4017 3 жыл бұрын

The regs do not state torque screwdrivers are needed. Only used when makers state so. I think what you are saying, is that many makers state their screws need to be torqued down, so we need one anyhow.

@efixx 3 жыл бұрын

That's pretty much exactly what I'm saying. 👍

@richardnewton1800 3 жыл бұрын

In my opinion the torque settings applied should be evidenced on the relevant electrical certificate as prove of compliance with manufacturers instructions. Just owning the tool is not enough.

@efixx 3 жыл бұрын

Good point, like this.

@tam2083 Жыл бұрын

Just trying to make the job more difficult with all this shit so all the consumer units that haven’t been done are all dangerous I don’t think so More and more regulations if it’s not broke don’t fix it