Dodge 4 7 L Engine Cylinder Head Replacement Part Six by Howstuffinmycarworks

Рет қаралды 115,958

9 жыл бұрын

This video is part 6 of the repair titled: How to replace the Cylinder Heads on Dodge 4.7 L SOHC Engines.
In this video we explain how to prepare the Replacement Heads and transfer the Accessories before Installation, how to clean the block surface prior to installing the New Cylinder Heads, we also explain how to install the new Heads and how to torque the new Cylinder Head Bolts.
About Us : www.howstuffinmycarworks.com
www.jlsporttrucks.com
Our Ebay listings : www.ebay.com/usr/jlst_fast
Cool Merchandise : howstuffinmycarworks-2.creato...
jlstfast.etsy.com
#Cylinderhead #headgasket #gasket #howstuffinmycarworks

Пікірлер: 25

@markb101 Жыл бұрын

Great job explaining step by step! Thank you for taking the time to show everything involved.

@Anonymous01416 7 жыл бұрын

I would use a 3M Scotch-Brite Roloc Bristle Disc, it's a green disc vs that wire wheel. I'm a prior GM tech, but every tech has their own way of doing things. I'm not a big fan of wire wheel on heads, upper or lower intake/ aluminum surfaces, water pumps and so on. The 3M scotch bristle is way less abrasive/ damaging vs a wire wheel and it cleans the surfaces as affective as a wire wheel in my experience.

@scorpio2nyc 4 жыл бұрын

Very good job thank you

@Eric91611 3 жыл бұрын

great videos

@19darlene66 4 ай бұрын

Can you please help! On the bed plate can you tell me which ones are yield to torque and which ones are standard? We sure appreciate your help.

@cultwho 8 жыл бұрын

thank you for making the videos, I've only worked on Toyota engines and I always coated the head gaskets with permatec head gasket adhesive, was wondering if I should coat the gasket for the 4.7l Dodge or not? Do you use any liquid or spray on type head gasket tack when you replace Dodge head gaskets?

@cargotoolshop5319 3 жыл бұрын

I use copper spray and I coat the block and cylinder head and the gasket, everything, all sides, never had a problem doing it

@Amigos1250 3 жыл бұрын

Do you have to install the rocker arms after you put the chains back? If I bleed the lifters and install them on the cylinder head and then put the cylinder head back would that be okay? Thanks

@lowvis7413 3 жыл бұрын

What is the sequence to installing rocker arms so i dont damage pistons or valve

@eded6406 3 жыл бұрын

Which way are the divots in the gasket facing? Ik if u put them on wrong itll burn it up.

@Nobody-ld7mk 7 жыл бұрын

Your Info helps...

@manguitomedina3517 7 жыл бұрын

You don't have to lube your camshaft?

@jamesflanery5409 4 жыл бұрын

Could the 5.2 v8 from 1998 magnum, be installed in a 2005 ram 1500 instead of 4.7?

@shanepowers7566 4 жыл бұрын

Im interested in swapping engines also. I think you have to swap the engine wiring and the engine computer also, but I’m not sure if that is all.

@cargotoolshop5319 3 жыл бұрын

The 2002 dodge ram came with the 5.9L engine before the 5.7L hemi was released into production, so find on of those trucks in a junk hard for conversation parts, the 5.2 and 5.9 engine are basically the same engine, I wanted to do the same thing on a 2006 durango which never came factory with a LA style engine

@r2rowdiaz139 Жыл бұрын

1 90° turn or 2 90° turns (180° total)???

@timothydean Жыл бұрын

How many miles were on the engine?

@greygoosemafia 7 жыл бұрын

arent you suppose to use the double copper?

@JF32304 7 жыл бұрын

I used Bosch Platinum +4 and they are great in these motors!

@greygoosemafia 7 жыл бұрын

It had iridium unit when I bought the car and seems to work a lot smoother than the coppers..... as a mechanic I can't really explain that

@markyisser9004 7 жыл бұрын

yow much did the remanufactured one cost?

@jmacintosh071521 5 жыл бұрын

My brother broke a bolt off in the block can it be removed

@pedroriverz3892 4 жыл бұрын

Mi to

@alsutfin8435 4 жыл бұрын

yes, I did the same thing, carefully put just a dab of JB Weld on the bolt and hold it in place , I also wrapped some thin cardboard around it to keep it center I removed the head first. (I used the 10 minute set, 4 to 6 hour cure), let it cure and mine twisted out with just my fingers.