Dodge dart and Chrysler 200 left front cv axle replacement

Рет қаралды 28,771

6 жыл бұрын

like comments and subscribe and share the love.
help me help you by donations no matter how small it is i really appreciate it here is my link to PayPal send it as if you are sending it to a friend
www.paypal.me/Momoboss5
thank you for your love and support
link to where you can find the parts:
amzn.to/2DlR5Do
the link for the right side is. • Dodge dart and Chrysle...

Пікірлер: 28

@metalman691991 5 жыл бұрын

Excellent video. I am tackling this repair today for the first time and after seeing this and reading procedures I am confident it will go well.

@realbuckybarnes1753 5 жыл бұрын

Thx just finished mine! Blow off valve and intake is next

@smoochie3601 3 жыл бұрын

The Torque wrench man, thanks for the video

@TurboPotato 6 жыл бұрын

this is super helpful, thank you!

@MrBill3288 3 жыл бұрын

great, video!! Thanks. i just bought a 2012 chrysler 200. looks like possibly driver side axel or possibly a leaky seal. i havnt looked at it to much yet as this week it is -10 F out side. once i am able to bring it into my shop i'll be able to look closer at it

@williambrentnall2471 5 жыл бұрын

awesome man !!! starting this in the am

@ymat5306 11 ай бұрын

Great work.

@matthewswindail3101 6 жыл бұрын

thanks man, been in the garage all day tryna figure this out, this is just what i needed.

@johnfernandez7947 3 жыл бұрын

thank u very helpful

@onemanagainsttheworld1630 5 жыл бұрын

bless up big man ting shot up..

@Srdelkuerno 4 жыл бұрын

Do you have a video on how to remove control arm on same car?

@ivicadolic8135 2 жыл бұрын

Hello do these cv axles have the abs tone rings at the end that goes to the wheel? Great video btw. I love that you just removed what was necessary. Thank you

@darwinmeijer4442 Жыл бұрын

Great video thank you very much. I have a question so my mechanic I have a 2016 Chrysler 200 limited 2.4 I need to replace a starter. My mechanic told me that when he pulled the axle out it’s going to leak transmission fluid is that true or not cause I watched you do it and I didn’t see any fluid coming out. Are they supposed to change the transmission seal? Thank you.

@dontrompas1312 2 жыл бұрын

Axle nut size?

@727gonzalez3 Жыл бұрын

Thats it ??? It just comes easier than i thought

@MrHumberto2205 2 жыл бұрын

Thank you, I have watch this video and the other. For some reason I can not get my CV axel in. Perhaps is not straight as I am working from the ground. Any suggestions will help!

@DULLAHGOSOHARD 2 жыл бұрын

Make sure the splines line up on the cv axle and which ever part it's not going in from

@MrHumberto2205 2 жыл бұрын

@@DULLAHGOSOHARD thank you bro, not much of a mechanic here, so your help is greatly appreciated. I will ok at the splines and make sure if they align. My problem is getting that pin that is in the axel in I think, does not click, I think I am not going in straight, will give it another shot today. Thanks for the response.

@MrHumberto2205 2 жыл бұрын

For got to mention that the transmission end is where I am having problems. Thanks!

@DULLAHGOSOHARD 2 жыл бұрын

@@MrHumberto2205 find me on Instagram and send me video and we can take it from there dullahgosohard

@whodidthat3478 5 жыл бұрын

What about the axle seal in between the axle and transmission? I got it the axle out but the rubber around the seal is a bit jagged now from prying the axle out. Would this cause a leak?

@DULLAHGOSOHARD 5 жыл бұрын

If You pry the wrong way and damage the seal get them change because they will leak

@whodidthat3478 5 жыл бұрын

Thank you! Huge help, good video.