DODGE JOURNEY VALVE COVER GASKET REPLACEMENT 3.6 V6 FIAT FREEMONT

Рет қаралды 82,605

5 жыл бұрын

DODGE JOURNEY VALVE COVER GASKET REPLACEMENT 3.6 V6 FIAT FREEMONT
► Valve Cover Gaket Kit: amzn.to/2TWKSEk
If you need to replace the valve cover gasket or remove the valve cover on 3.6 v6 this is the right video for you. We will show you how to replace or remove the valve cover gasket on Dodge Journey. The rest of the world Dodge Journey is known as Fiat Freemont so the procedure to replace the valve cover gasket on Fiat Freemont will be the same for the 3.6 v6 engine. We demonstrated on a 2012 Dodge Journey 3.6 V6 Engine.
This video might be helpful on:
2009 Dodge Journey Oil Leak Valve Cover Gasket Replacement Removal 3.6
2010 Dodge Journey Oil Leak Valve Cover Gasket Replacement Removal 3.6
2011 Dodge Journey Oil Leak Valve Cover Gasket Replacement Removal 3.6
2012 Dodge Journey Oil Leak Valve Cover Gasket Replacement Removal 3.6
2013 Dodge Journey Oil Leak Valve Cover Gasket Replacement Removal 3.6
2014 Dodge Journey Oil Leak Valve Cover Gasket Replacement Removal 3.6
2015 Dodge Journey Oil Leak Valve Cover Gasket Replacement Removal 3.6
2016 Dodge Journey Oil Leak Valve Cover Gasket Replacement Removal 3.6
2017 Dodge Journey Oil Leak Valve Cover Gasket Replacement Removal 3.6
2018 Dodge Journey Oil Leak Valve Cover Gasket Replacement Removal 3.6
2019 Dodge Journey Oil Leak Valve Cover Gasket Replacement Removal 3.6
2012 Fiat Freemont Oil Leak Valve Cover Gasket Replacement Removal 3.6
2013 Fiat Freemont Oil Leak Valve Cover Gasket Replacement Removal 3.6
2014 Fiat Freemont Oil Leak Valve Cover Gasket Replacement Removal 3.6
2015 Fiat Freemont Oil Leak Valve Cover Gasket Replacement Removal 3.6
2016 Fiat Freemont Oil Leak Valve Cover Gasket Replacement Removal 3.6
2017 Fiat Freemont Oil Leak Valve Cover Gasket Replacement Removal 3.6
2018 Fiat Freemont Oil Leak Valve Cover Gasket Replacement Removal 3.6
2019 Fiat Freemont Oil Leak Valve Cover Gasket Replacement Removal 3.6
PRODUCTS USED IN THE VIDEO:
► Panel Removal Tools: amzn.to/2tfiEZD
► Screwdriver Set: amzn.to/2tbcI3W
► Tool Set: amzn.to/2TCHRca
► Plastic Clips: amzn.to/2UZUuOW
► Makita Impact: amzn.to/2DXXQfs
► Our Website: mechaniclifestyle.com
► Our Baby Girl Channel: goo.gl/WiVs8Y
► Our Second Car Channel: goo.gl/XB6fHq
► Honest Product Review Channel: goo.gl/sMPQXk
► GoFundMe Link: goo.gl/pUife3
Our Most Popular Videos:
► Bumper Repair: goo.gl/XBe4Sh
► Missing Wheel Lock: goo.gl/5n4a5i
► Bearing Replacement: goo.gl/JSNDnZ
► Restore Headlights: goo.gl/qVhDkf
♦♦♦ Cameras & Gear Used For This Video ♦♦♦
•Cameras
Panasonic Lumix FZ300: amzn.to/2BNWtNA
•Tripod
Polaroid 72-inch: amzn.to/2iVTmP4
•Microphone
Polaroid Pro Video Condenser: amzn.to/2krpSsA
•Light
NEEWER 160 LED CN-160 Dimmable: amzn.to/2jjg9Bd
•Comuter for editting
Lenovo ideapad 310: amzn.to/2kqUNFl
♦♦♦ Other Equipment and Gear that I use ♦♦♦
•Camera
Sony HD Video Recording HDRCX405: amzn.to/2jk8nqB
•GoPro HERO5 Black: amzn.to/2ktNKfj
•Extra Computer For Editting
Lenovo Ideapad 510: amzn.to/2ktOuB7
► Like Us on FACEBOOK: / worldmechanicsofficial...
► LIKE & SUBSCRIBE for MORE DIY VIDEOS that could SAVE YOU BIG $$$$$$$ !!!
This is not a sponsored video. Everything is purchased by us!
The video is meant for entertainment purposes only. Do not Attempt!
AMAZON ASSOCIATES DISCLOSURE
Auto Repair Guys is a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for sites to earn advertising fees by advertising and linking to Amazon.com
*Disclaimer
We, Auto Repair Guys, are not responsible for property damage or injury incurred as a result of any of the information contained in this video. Information given in this video does not guarantee the desired outcome. Any injury, damage or loss that may result from improper use of the tools, equipment, or the information contained in this video is the sole responsibility of the user and not Auto Repair Guys.

Пікірлер: 60

@AutoRepairGuys 5 жыл бұрын

⛐ Check out our Garage to see what tools we use and recommend: www.amazon.com/shop/worldmechanics ⛐ Subscribe and hit the notification bell by the subscribe button for new videos: kzfaq.info/love/J9xpq0qUZevSEdBSFqO2ow ⛐ Our GoFundme Page: www.gofundme.com/auto-repair-guys

@elmarito007 2 жыл бұрын

Thanks. I have a Dodge Charger with the same engine and this helped me a lot. It’s a pain in the ass to remove it but the suffering beats the $900 quote from the dealership by miles.

@Redslayer86 Жыл бұрын

Thank you for naming the stuff you were removing, I could not for the life of me find what the camshaft phasers were for my friend lol.

@BigGinBigD 2 жыл бұрын

Very helpful! I have a jeep with the same 3.6 but jeep videos never show this side being removed so I searched for other vehicles with same engine. You guys are great! Thank you!

@davidbachy5627 Жыл бұрын

Very good job! I was expecting a part 2 for the other side...

@alfonsogobaleza7968 Жыл бұрын

You have the best mechanic,while working he still wearing a ring and a beautiful watch. By the way it’s a good video. I have a journey.thanks.

@csoled11 4 жыл бұрын

That was insane!! ...doable but insane, so much to remove.....thinking about pricing the job around and weight my options. Thanks for the video though.

@jsmith1190 Жыл бұрын

This video is very helpful wish you could’ve done a video for the one in the back

@raheemraheem3764 5 жыл бұрын

Good job Keep it up man

@stevenzuniga7946 3 жыл бұрын

Oh my God you guys help me out a lot

@MexicanVulture87 3 жыл бұрын

Love your videos guys! I have a dodge journey and you have already helped me so much! Next I will be doing the rockers arms and lifters. Any chance you could do that asap, or help me out? I got a few questions and would greatly benefit from your help! Thanks again guys!

@homyvyktorya8143 5 жыл бұрын

Yeahh!! Good video, like and new sub, i love your video of repair elantra 👍, i live in Mexico good luck for this chanel 🤩🤩

@pilarcortez3707 4 жыл бұрын

Great video I’ve learned a lot from you guys i have a problem with my windows not working can you made a video how to fix this I try with switch and still not working help please

@ebraheem.ch.s1804 Жыл бұрын

We hope you will make a video about replacing the gasket near the stammer the car for the Dodge Journey engine

@eddiecoker4808 Жыл бұрын

Y’all are the bestttttttt

@munguiamusic8759 2 ай бұрын

Good job but instead of disconnecting the coolant hoses, just remove the plastic by windshield and remove the support bar. Opened up a lot more room on top to work.

@Creative-ap90 Жыл бұрын

How to replace lifters please show video

@frazercollins9559 3 жыл бұрын

Good video, but take off the bling when you're working under the hood lol.

@janicemedina9623 2 жыл бұрын

Can you do a video adjusting valve lifters?

@deyshon2 4 жыл бұрын

Is there a water pump and timing kit change for a 2012 dodge journey sxt?

@chrismiller323 Жыл бұрын

If I have a leaking gasket will this cause a misfire ? I’ve replace coils , plugs , iacv, and fuel injectors, great video also

@stensg 4 жыл бұрын

Do you have a video on head gaskets for the journey? I'm not seeing it if you do.

@InJesusNameAmen143 4 жыл бұрын

Those Front brakets no need to remove them . Just Bent them Back toards the Radiator to reach the Weird screws infront of them . The two front brackets that hold the front of the manifold .

@TheRoadLessChosen 2 жыл бұрын

I spent like 45 minutes foolin with one of those damn brackets only to have them save me time when they moved to the back part of the video! 😂😂😂

@jraider43 Жыл бұрын

Hi is there a hose that connects to the valve cover?

@juantrejo6469 3 жыл бұрын

How to remove head gasket do I have to remove trimming belt

@ernesthackney2841 3 жыл бұрын

Replacing head gasket on 3.6 l

@JuanTorres-mr18t 2 жыл бұрын

Hi, I am not seeing the video showing the valve cover torque specs can you please post the link to video.

@TheRoadLessChosen 2 жыл бұрын

When I changed my back spark plugs I think I got the ignition coils confused. I mixed 3 and 5. Will that make my system throw errors? I put 5 in the middle and 3 on the right. The 1rst one is correct

@ManuelCamarena0725 2 жыл бұрын

Shouldn’t be an issue

@IgnacyFortnite 4 жыл бұрын

hi, i have a question what is the strength of tightening the head fixing bolts?

@TheRoadLessChosen 2 жыл бұрын

Did you ever figure this out

@IronClad222 3 жыл бұрын

My friend, what are the torque values for reinstalling the valve covers?

@TheRoadLessChosen 2 жыл бұрын

You ever figure this out?

@IronClad222 2 жыл бұрын

@@TheRoadLessChosen give me your email and I can send pics of the torque specs to you

@DOORMAN301106 4 жыл бұрын

Hi, thanks for all your videos, a lot to learn and save $$$ Do you have video showing how to remove the valve cover on the inside Thanks

@davidsandoval4821 4 жыл бұрын

Yes please show the harder one to remove you did the easiest one, I watched entire video waiting to see what I needed help on then video just ended.

@XqeDiosxqe 2 жыл бұрын

Who would've thought that this video would come in handy in 2022.... On a dodge avenger V6 engine.......I believe he said the torque is about 7 to 9 pounds..... It's an aluminium head so don't torque too much.

@neeheeneehee1264 5 жыл бұрын

Pcv valve 2009 dodge journey rt location

@josecastillo8634 2 жыл бұрын

Why on my dodge journey 2012 keeps overheating and I change the radiator the temperature sensor and the antifreeze keeps going to the reserve and it fills up.

@Aq-hy7jc Ай бұрын

Hey did you ever find out why your overheating and filling reservoir?

@angelcervantes7773 3 жыл бұрын

What's the torque?

@GreatLakesAudits Жыл бұрын

13 ft/ 156 in pounds 18 nt

@bigboiandrew6980 3 жыл бұрын

How much does this repair usually cost?

@tobbycarkhuff3029 6 ай бұрын

More than what the car is worth

@your247support 3 жыл бұрын

No body want film the back valve cover lol

@TheRoadLessChosen 2 жыл бұрын

😂😂😂😂😂 this is hilarious. I was actually co soldering doing a reverse video putting it back together. You can’t find reverse jobs anyway.

@janhaley4082 Жыл бұрын

My back valve cover seems to be stuck on one corners and all screws are loose.

@gavinjones9007 Жыл бұрын

@@janhaley4082 same! Please tell me how you got it off lol my back right corner is stuck. This is such a pita

@janhaley4082 Жыл бұрын

@@gavinjones9007 on the back valve on the back corner on the driver’s side, you gotta take the pcv valve off. Sorry about that, I barely got this notification, hopefully you figured it out before then.

@drewwolf2591 7 ай бұрын

Chrysler 200 has plenty of room to get the backside out and air ducts

@drewwolf2591 7 ай бұрын

Also just disconnect the throttle body and bring it out with the intake.

@TheCptnrsk 7 ай бұрын

The reason they don't show the back on the Chrysler 200 3.6 is because you wouldn't buy parts. It's an absolute mfer. The phaser actuator on the back cover are up against the ac line, power steering line, and coolant tank line with almost zero room to for bolt movement. Yes you have to take the pcv valve out but that's not all you have to get the left side up and create clearance for the shaft the pcv valve sits on because it hangs over the valve cover about an 1/8 of an inch and is a total btch. I did the entire job in 8'hours and have one phaser actuator to put in and one bolt on the other to get tight plus the upper intake to put back on. You do not have to remove the throttle body. Never buying a front wheel drive car again 😅

@michaelvalone907 5 жыл бұрын

This is a dealer job, not for the diy'er.

@Puff6977 4 жыл бұрын

If you have the time, and KZfaq if needed, it’s all DYI 😬. Dealers charge a lot and some can’t afford it. Besides it only gets easier and faster the more you do it!

@frazercollins9559 3 жыл бұрын

Dealer will probably charge $1,000 in labor for that job.

@Shawn855 3 жыл бұрын

Stop limiting yourself. If someone else can do it, why can't you? We have the tutorial right in front of us. What's stopping us?

@TheRoadLessChosen 2 жыл бұрын

@@frazercollins9559 I just saw one where a youtuber, great mechanic btw, but their shop charges 3500. 😂😂😂

@TheRoadLessChosen 2 жыл бұрын

😂😂 definitely for the DIY guy. I’ll just leave it at that.