Man... its 8:30 in the morning and iv been working on this truck all night... thank you!!

Thankyou for this video!! I’ve been chasing the name of this thing all night!

Thank you for making this video. Very helpful!

Good tip, Tim! Presumably this is a recurring problem because of marked overfilling.

Good one Tim. My wife's 05 Dodge was overfilled (Jiffylube) and it was a mess. I could see this happening pretty easily. Thanks for the video.

Haha ain't gonna lie I lol'd when the river poured out.... Thanks for the chuckle!

Lol, you can hear the trans fluid hitting the floor and not a drain pan. We all know that sound hahaha. Great video

Great information, thank you.

Thank you for making this video. I have this same problem in my 02 Ram Van 3500. I looked up part number you provided, as I like to use Mopar, and found out part for my trans has been discontinued - 5604 5489 AA (along with seemingly everything else related to my van). How do you feel about NAPA Echlin sensors?

Awesome video thanks for sharing. I hope you have a blessed week my friend.

HI Tim great tip . Keep at it buddy almost 30K 👍

Thank you I did know it was my sensor but I did not know oil will come out, so thank you for letting me know, lol that was funny ,I'm glad it did not happen to me now i will change my.

Good video thank you

Hey, Tim where’s your shop at in anchorage? I’m in need of car repair. I have 2006 Dodge Ram 1500 Gas

Great video! Just wondering if this could be the problem with my 04 5.7, it won't start and noticed the PRNDL lights have vanished. I'm in Portugal and can't find anyone to fix it😭 so would be glad for any advice!

Great video! That was a head scratchier for sure.

I have a question I replaced mine but it's still doing the same thing but I put it in when it was in park sould I pull it out and put it in first and see if that works

Very nice little tip , and great video as always. I used 2x to get you to New York speed 😉😁

Hello l saw your video and l think you can help me out. I have a RAM 6.7 2009 old style 2008, I get a code of (p21 21 throttle/pedal position sensor/ switch circut Range/performance). Thr truck runs good when the code doesnt show up, which would happen some days and other days it would show the code and the truck would start acting up. Sometimes the transmission wont let me put it to do manual drive and it stops on Drive, and sometimes when I put it in reverse or drive it feels like the truck tumbles a lot. Do you think its because of the sensor from the video? I would appreciate your help. Greetings from Austin, Tx

Very nice info. i appreciate your effort brother. -pawPaw

Just curious do you absolutely have to move the gear to lever to low 1st gear because I already started and drained the oil and saw that you did that?

Excellent tips and video Tim! And there’s nothing quite like the gentle sounds of transmission fluid hitting the garage floor!

My 2003 durango has a longer trans pan,and no neutral safety switch visible on the side of the case. Is it possible i hot a 2004 trans 2wd. And is there a park neutral switch inside the pan?

Have a 03 2500, it won’t crank. No guages, no shift indicators. Any ideas would be greatly appreciated. Idk where to look

Excellent !

Would a malfunction of this sensor cause the reverse lights to not work? The vehicle still shifts into reverse, just no reverse lights.

Hi I just bought a 2006 Sedona my question is that the keyless remote doesn't work, I have put a new battery but it still doesn't work

Well I can't say I didn't laugh...been there done that but it's hilarious when it happens to someone else...not so much to me :D Nice video Tim and thanks for not editing that out :D

i hate transmission fluid. another great video thank you

When you were tugging on that Range selector I was anticipating some oil to leak out, But I still wasn't ready for that much to come out, What a mess.

What do you know. Here I am back for some tips. I have a 2006 Dodge Ram 5.7, auto trans (friend's vehicle) that won't start unless he rocks the truck. I'm troubleshooting and your video came back.

thanks had the same problem

good stuff! had the same code with my 04 and this was perfect for walking me thru it! Thanks brother!

Is Brake Kleen ok for the plastic connector. In my experience, BK melts some connectors.

I just got a 08 ram 3500 from Copart with manual transmission it won’t start or even turn over it just makes a clicking noise. Anyone know if there’s some sort of safety switch that might engage after a collision or something?

Sweet tip

My 2007 Ram 1500 5.7 won’t crank, and it doesn’t show any of the gear selection display it shows the miles but not prnd12 . Is this the same issue??

What's up Tim great video thanks for sharing Brother

excellent

Thanks.

I’m confused the p2121 code is the tps or accelerator pedal position sensor voltage low why would that range sensor cause that to happen? Unless it forced the truck to go into limp mode and makes the truck accelerate slow

quick question you left the shifter in 1 meanwhile replacing the sensor?

Lol. Well done, Tim. Thanks for leaving the fluid mess in there. Its nice to know I'm not the only person things like that happen to.

Great video Sr.

Hey need some help with my 05, it won’t turn over but the little box that goes around the D for drive and the R for reverse etc... is not around them. Everything lights up when I turn key but nothing happens at all no noise. Car worked fine just took down dash to install a remote start, seen I needed another plug and put dash back up and now nothing, any help from anyone is appreciated

Can a bad range sensor kill the motor on the road with no start like security cut out. First thing i tried was slammin the shifter back and forth like the old days.. acually worked to start but i want to fix the issue

My 2009 ram wont engaged gears

I see that you took a transmition fluid shower ..hahaha

Looking forward to seeing more hair! LOL

My god, you hit a gusher there, you struck oil, you are rich lol. Somehow i don't think that sensor was sealed, it's just a feeling i get :-D:-D

08 dodge wont start new starter battery not getting to battery

Would someone comment the part number, I'm having trouble finding it

Damn, I hate those unexpected messes.

P2122 DODGE Code - Throttle/Pedal Position Sensor/Switch 'D' Circuit Low

ATF shower!

Crap ! Made an ATF mess

How about we just pass on the ATF shower. and go rip on some salmon lips (fishing)

Hello I saw your video and I think you can help me out. I have a RAM 6.7 2009 old style 2008, I get a code of (p2121 throttle/pedal position sensor/ switch circut Range/performance). Thr truck runs good when the code doesnt show up, which would happen some days and other days it would show the code and the truck would start acting up. Sometimes the transmission wont let me put it to do manual drive and it stops on Drive, and sometimes when I put it in reverse or drive it feels like the truck tumbles a lot. Do you think its because of the sensor from the video? I would appreciate your help. Greetings from Austin, Tx