Add Ceratec to engine, drive 120-300miles. Then you will hear the difference.

using it in my new Porsche 992... so far so good.

You should do a before and after but after a few hundred miles or so until it starts working.

I use it in my 19 GT with 530 Pennzoil ultra platinum. So far it's been a year and the engine runs and sounds great!

I have a 2023 GT and had a tick/knock after the first oil change at the dealer. I put in Ceratec and after around 2 months the sound improved but engine seemed a little sluggish compared to prior to oil change. I dropped the oil after 7,500K from the first service and noticed that the dealer over filled the oil by nearly 1L. I put in the correct amount of Liqui Molly 5w 30 and didn’t add Ceretec and the engine is purring like a little baby now. If you have the issue maybe put in an oil flush then drain oil. Replace oil being careful to fill to the excact amount 9.5L.

This product should be shaken well and you should remove some engine oil so your car does not get overfil.

What type of exhaust you have? Sounds great

I have used alot of additives in my cars the best one is called (Extralube ZX1) its from the UK and originally designed to cool and to stop wear on north sea oil rig drilling drill bits! I swear by it,instant quiet engine,you can put it even in coolant to protect water pump and also in fuel

It usually takes a 100 miles for it to really work. But Amsoil and Ceratec work really well for me

I used 5-30 with a bottle of ceratec and my engine became silky smooth surprisingly 😂 no more typewriter tick

I used ceratec on a 2017 Mustang GT and this aditive after some hundred of miles get rid of it. But when you do an oil change again the sound come back, now im going to add another bottle.

Its crazy that Ford let the tick go past the 18 models.

Have you checked the bolts 🔩 on the head covers

I have a 5.0 GDI and the Lucas low viscosity oil stabilizer seems to do well for me. Thanks for the video.

Ceratech 100% fixed my 2021 engine tick. It was so loud I would hear it from inside the car at drive-thrus if I had the window down. All day every day, warm or cold. Ever since the ceratech, no more ticks.

I have a 19gt and had the tick then used that 5-20 pennzoil ultra platinum and legit the sound it gone. It’s really quiet now. Was previously running royal purple 6-30

Besides the exahust it sound like my 2.0 TFSI :D

How is the car today? Do you use it still?

You need to run that for an hour to bake it in

Yeah I’m at 400 miles on my 21 GT and it’s already ticking and rattles between 2k-3k rpm quite loudly. Do you think I should wait until I change my oil to add this?

Over-filling the engine by 2/3rds of a quart will quiet an engine down. It's an old-school used car trick to hide a toasted engine; add extra oil and it quiets the engine down.

Mines the same way comes and goes at odd times

So if the car takes 8 Qts.. Do you add 2 bottles to 8 quarts or to you subtract 2 bottles of fluid (600 ml) and basically add this to 7.5 qts of oil so the total volume of liquid is still 8 qts ?

Wouldn’t he be over filled now?

Hello dear i m Adeel Emmanuel from Pakistan I have Suzuki Baleno 04 model i m using egine oil 20 50 can I use this oil 150ml

Have you checked the compression in each of the cylinders? I thought this issue caused some of the bores to become non-circular.

Try STP nano Ceramic. Yiull need to bottles. Wait until you change your oil and out in one less quart of oil.

Im under the impression the coyote type writer tick is harmless and normal for these motors. My 2011 f150 5.0 sounds exactly the same.

Im having the same problem and just added some ceratec. Did you add after every oil change?

Just got my 2015 and I can’t stand this noise I’m wanting to get some of this but my oil change was at 62k miles and I have 65k is it okay just to add it? Or does it need to be after a oil change?

Hey I was interested in using it in my 2019 Ram 6.4. Just one

I only had to use one bottle.

My 2020 GT ticked after the first oil change. Added ceratec and it was gone until my most recent oil change. Planning on adding another dose. Whatcha think?

I think it will take maybe a 100 miles before it works fully

According with manufacture Ceratec need to run few hundred miles until the product build the popular ceramic film in the internal engine moving parts.

Using Pennzoil full synthetic alone will eliminate the tick. 21 year Ford tech veteran.

Do I have to drain some oil out before adding this to the engine? Thank you

It sounds exactly the same. How can you not hear it?

so you put the 10 quarts and then add one bottle of ceratec? is this correct

You have to drive the car like 100 miles or more like you said at the end then hear the noise

It takes about 4-5 months to work , so do another vid…….

Did you know this folks. This needs to be added to each oil change. My question to liqui moley was the following. When vehicle is due a service interval after i have used cretec for the first service. Liqui moley: All the liquids, leave the engine bay. You can have your vehicle serviced. And drive the vehicle with cretec in the system and the rest has left the engine during the engine oil service. Liqui moley recommended a new bottle is added at each service to maintain 100 percent cretec protection. 💯

Did you add the ceratec on top of the 10 quarts of oil?

Have the same on my 2023 since day 1. Is there no solution from Ford yet?

It's ok to add even tho I just did oil change yesterday with 8 qts? Do I add 1 whole bottle to 8 qts oil?

Ticking noise usually happens when a good beat down happens no shit in a bottle is going to put metal or bearings , timing chain stretch back and like it's really fixed. U keep telling ur self it's fixed and see how long that works

I still heard it

The best Mustang engine ever built is the Ford Windsor 302 efi Interceptor engine. Close to 600 horsepower, unlimited horsepower range and no ticking noises. Quite and smooth.

Hi there, Can I use/safe to use liqui moly CeraTec or mos2 for 2013 MERCEDES Vito 122 CDI. Thanks in advance

For 7.5 liter of oil should i use 1 bottle ceratec or 2? Thank you..

Whats your issue with the noise? Its supposed to tick

Where is it said to warm up the engine first?

Is the tick still gone? I’ve heard that it returns after a few thousand miles

You need to take out the same amount of oil as the ceratec that goes in. You never want to have the oil level over the fill line cause too much oil can cause damage.

Solution is 5w50 liqui moly oil and ceratec best combo

seems like a great way to stop the ticking. The way I'm thinking is if your engine oil is reading top of the fill range then adding 600ml of Ceratec is going to over fill the oil capacity of the engine - not a good thing. I suppose the best way is to add it when doing an oil change and allow the 600ml in the fill up. Adding after the oil change means you should remove 600ml of oil first?

Why do you use two bottles I'm curious most people that have 5.0 only use one any reason for that

You say "ticking", why don't you try Liqui moly hydraulic additive?

Bro it sounds exactly the same as before you put that crap in, how much they pay you to sell out ?

okay that tick is loud tho, that might be rod bearings

I have a tahoe 2016 idk if I should use one or two bottles of ceratec can anyone tell me?

ceratec is inserted into the engine with the engine running ??

Guys use motosilk engine treatment that one is best high mileage cars and muscles cars recommended and no needs to use every oil change one time using protects over 100.000 miles little bit expensive 😎

Bro i have the same problem, Is it normal that it also consumes more oil?

I bought my 18 GT 6spd new and have never heard anything abnormal. This video sounds exactly the same as before. New engines make noise it’s normal. I think the “tick” is a paranoia thing or it’s the normal sound of the components on the engine. Piston slap could be a possibility but it definitely has a distinct sound and there is no way an additive will help if it’s the issue. There have been 18-21 GTs come off the show room with piston slap so it’s not that unlikely. Ford will do everything they can to not acknowledge it also.

So now your oil level is above max? Additives are supposed to be added with oil so you still have the correct oil level. You could also remove some oil before dumping two bottles of more liquid into your oil.

Any update if its good to use ?

use tsl olie

I cannot hear any difference. You should the dealer check your cam tensioners though.

My oil looks like chocolate milk with very small white swirls kinda like when you put coffee creamer in a coffee am I the only one?

Is that consistent ticking normal?! Mine sounds just like this at idle!

do i have to drain the equal amount of oil before putting it?

This video shows no irregular engine noise to begin with.

Placebo effect

how much do you know how to use ?

The engine sounds like my n55 noisy

🙈🙈🙈 you must makes some Miles and then Works 👌

Sounds no different, when you said add it to the transmission, doesnt that mean the gearbox?

Jajajajjaja it's the same

Cant believe you put that milk in. Also, you didnt drain anything out first. Didnt hear any change.

You are doing it wrong !! You are supposed to warm up the engine and then open the oil cap and pour the Ceratec on a running engine .

Your car engine sounds broken

another poor test...there is absolutly no noise change ! you need to understand that it needs miles before being effective...

Its the timing chain making noise...i had same noise coming through underneath

Sounds worse. You’re listening to very normal engine operating sounds.

I feel dizzy after watching your video. Too much vibration like you're in a heavy storm.

You should have changed the oil.

sorry mate its you :D its still there just a bit softer :/

I have better luck using the Liqui Moly MoS2.

No difference at all dude

Snake oil

What is it that he can't hear? Sounds exactly the same! Thanks for proving nothing, well done, bravo

I used it today in my 2018 Gt today, and the tick stopped!!

Yeah it sounds like a collapsed lifter bud

Lol these mustang engines are too basic, you can add sludge it would idle better 🤣

Is this an actual fix, a bandaid or psychological &&&&. Everyone needs to look up THE OIL GEEK. Adding these additives in general can be more harmful than good, it also depends on what type of engine oil you are using. Some brands of additives react harshly to certain oils, so hence your engine protection is compromised- bearings, piston bore and so on. PLEASE, PLEASE DO YOUR RESEARCH PEOPLE and what you may find might make your head spin. Good luck 😂

Bcareful of cheap copies

Mustang = Death Ride